Dell-P1913s User's Guide En-Us

Dell™ P1913/P1913S/P2213 Monitor
User's Guide
Setting the display resolution
Information in this document is subject to change without notice.

© 2012 ~ 2016 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in
the United States and/or other countries, Intel is a registered trademark of Intel Corporation in the U.S. and other countries; and ATI is a trademark of Advanced Micro Devices, Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary
interest in trademarks and trade names other than its own.
Model P1913b/P1913t/P1913Sb/P1913Sf/P2213f/P2213t
July 2016 Rev. A05

Dell™ P1913/P1913S/P2213 Monitor User's Guide
About Your Monitor
Setting Up the Monitor
Operating the Monitor
Troubleshooting
Appendix
Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.
CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Information in this document is subject to change without notice.

© 2012 ~ 2016 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc; Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in
the United States and/or other countries, Intel is a registered trademark of Intel Corporation in the U.S. and other countries; and ATI is a trademark of Advanced Micro Devices, Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary
interest in trademarks and trade names other than its own.
Model P1913b/P1913t/P1913Sb/P1913Sf/P2213f/P2213t
July 2016 Rev. A05
Back to Contents Page
About Your Monitor

Package Contents
Product Features
Identifying Parts and Controls
Monitor Specifications
Plug and Play Capability
Universal Serial Bus (USB) Interface
LCD Monitor Quality and Pixel Policy
Maintenance Guidelines
Package Contents
Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing.
NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries.
NOTE: To set up with any other stand, please refer to the respective stand setup guide for setup instructions.
NOTE: P1913/P1913S/P2213 monitor is BFR/PVC-free (Halogen-free) excluding external cables.
Monitor

Stand
Power Cable
VGA Cable (Attached to the monitor)
DVI Cable
USB upstream cable (enables the USB ports on the monitor)

Drivers and Documentation media
Quick Setup Guide
Product and Safety Information Guide
Product Features
The Dell Professional P1913/P1913S/P2213 flat panel display has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD) and LED backlight. The monitor
features include:
■ P1913: 48.26 cm (19-inch) viewable area display (measured diagonally). 1440 x 900 resolution, plus full-screen support for lower resolutions.
■ P1913S: 48.26 cm (19-inch) viewable area display (measured diagonally). 1280 x 1024 resolution, plus full-screen support for lower resolutions.
■ P2213: 55.88 cm (22-inch) viewable area display (measured diagonally). 1680 x 1050 resolution, plus full-screen support for lower resolutions.
■ Wide viewing angle to allow viewing from a sitting or standing position, or while moving from side-to-side.
■ Tilt, swivel, vertical extension and rotate adjustment capability.
■ Removable stand and Video Electronics Standards Association (VESA ™) 100 mm mounting holes for flexible mounting solutions.
■ Plug and play capability if supported by your system.
■ On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.
■ Software and documentation media includes an Information File (INF), Image Color Matching File (ICM), Dell Display Manager software application and product documentation.
■ Security lock slot.
■ Stand lock.
■ Asset Management Capability.
■ Capability to switch from wide aspect to standard aspect ratio while maintaining the image quality.
■ P1913/P1913S/P2213 monitor is BFR/PVC-free (Halogen-free) excluding external cables.
■ TCO-Certified Displays.
■ Dell Display Manager software included (comes in the CD shipped with the monitor).
■ Arsenic-Free glass and Mercury-Free for the panel only.
■ High Dynamic Contrast Ratio (2,000,000:1).
■ 0.3 W standby power when in the sleep mode.
■ Energy Gauge shows the energy level being consumed by the monitor in real time.
Identifying Parts and Controls
Front View
Front panel controls
Label Description
Function buttons (For more information, see Operating the
1
Monitor)
2 Power On/Off button (with LED indicator)

Back View
Back View with monitor stand
Label Description Use

VESA mounting holes (100 mm x 100 mm
1 Wall mount monitor using VESA-compatible wall mount kit (100 mm x 100 mm).
- behind attached VESA Plate)
2 Regulatory label Lists the regulatory approvals.
3 Stand release button Release stand from monitor.
4 Barcode serial number label Refer to this label if you need to contact Dell for technical support.
5 Security lock slot Secures monitor with security cable lock.
6 Dell Soundbar mounting brackets Attaches the optional Dell Soundbar.

7 Cable management slot Use to organize cables by placing them through the slot.

Side View
Bottom View
Bottom view without monitor stand
Label Description Use
1 AC power cord connector Connect the power cable.

2 DC power connector for Dell Soundbar Connect the power cord for the soundbar (optional).
3 DP connector Connect your computer DP cable.
4 VGA connector Connect your computer VGA cable.
5 DVI connector Connect your computer DVI cable.
Connect the USB cable that came with your monitor to the monitor and the
6 USB upstream port computer. Once this cable is connected, you can use the USB connectors on
the monitor.
Connect your USB device. You can only use this connector after you have
7 USB downstream port connected the USB cable to the computer and USB upstream connector on the
monitor.
To lock the stand to the monitor using a M3 x 6 mm screw (the screw is not
8 Stand lock feature
provided).
Monitor Specifications
Flat Panel Specifications
Model P1913 P1913S P2213
Screen type Active matrix - TFT LCD Active matrix - TFT LCD Active matrix - TFT LCD
Panel type TN TN TN
482.6 mm (19-inches diagonal viewable image 482.6 mm (19-inches diagonal viewable image 558.8 mm (22-inches diagonal viewable image
Screen dimensions
size) size) size)
Preset display area:
Horizontal
408.2 mm (16.07 inches) 376.3 mm (14.81 inches) 473.8 mm (18.65 inches)
Vertical
Pixel pitch 0.2835 mm 0.294 mm 0.282 mm
160° (vertical) typical 160° (vertical) typical 160° (vertical) typical

Viewing angle
170° (horizontal) typical 170° (horizontal) typical 170° (horizontal) typical
Luminance output 250 cd/m² (typical) 250 cd/m² (typical) 250 cd/m² (typical)
1000 to 1 (typical) 1000 to 1 (typical) 1000 to 1 (typical)

Contrast ratio
2M to 1 (typical Dynamic Contrast On) 2M to 1 (typical Dynamic Contrast On) 2M to 1 (typical Dynamic Contrast On)
Faceplate coating Antiglare with hard-coating 3H Antiglare with hard-coating 3H Antiglare with hard-coating 3H
Backlight LED edgelight system LED edgelight system LED edgelight system
Response time 5 ms black to white (typical) 5 ms black to white (typical) 5 ms black to white (typical)
Color depth 16.7 million colors 16.7 million colors 16.7 million colors
Color gamut 83%* 83%* 83%*

*[P1913]/[P1913S]/[P2213] color gamut (typical) is based on CIE1976 (83%) and CIE1931 (72%) test standards.
Resolution Specifications
Model P1913 P1913S P2213
Horizontal scan range 30 kHz to 81 kHz (automatic) 30 kHz to 83 kHz (automatic)
Vertical scan range 56 Hz to 76 Hz (automatic) 56 Hz to 75 Hz (automatic)
Maximum preset resolution 1440 x 900 at 60 Hz 1280 x 1024 at 60 Hz 1680 x 1050 at 60 Hz
Supported Video Modes
Model P1913/P1913S/P2213
Video display capabilities (DVI & DP playback) 480p, 480i, 576p, 576i, 720p, 1080p, 1080i
Preset Display Modes

P1913
Horizontal Frequency Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical)
Display Mode
(kHz)
VESA, 720 x 400 31.5 70.0 28.3 -/+
VESA, 640 x 480 31.5 60.0 25.2 -/-
VESA, 640 x 480 37.5 75.0 31.5 -/-
VESA, 800 x 600 37.9 60.3 40.0 +/+
VESA, 800 x 600 46.9 75.0 49.5 +/+
VESA, 1024 x 768 60.0 75.0 78.8 +/+
VESA, 1152 x 864 67.5 75.0 108.0 +/+
VESA, 1280 x 800 49.3 59.9 71.0 +/-
VESA, 1280 x 1024 64.0 60.0 108.0 +/+
VESA, 1280 x 1024 80.0 75.0 135.0 +/+
VESA, 1440 x 900 55.5 60.0 106.5 -/+
VESA, 1440 x 900 70.6 75.0 136.8 -/+

P1913S
Display Mode
(kHz)
VESA, 720 x 400 31.5 70.0 28.3 -/+
VESA, 640 x 480 31.5 60.0 25.2 -/-
VESA, 640 x 480 37.5 75.0 31.5 -/-
VESA, 800 x 600 37.9 60.3 40.0 +/+
VESA, 800 x 600 46.9 75.0 49.5 +/+
VESA, 1024 x 768 48.4 60.0 65.0 -/-
VESA, 1024 x 768 60.0 75.0 78.8 +/+
VESA, 1152 x 864 67.5 75.0 108.0 +/+
VESA, 1280 x 1024 64.0 60.0 108.0 +/+
VESA, 1280 x 1024 80.0 75.0 135.0 +/+
P2213
Display Mode
(kHz)
VESA, 720 x 400 31.5 70.0 28.3 -/+
VESA, 640 x 480 31.5 60.0 25.2 -/-
VESA, 640 x 480 37.5 75.0 31.5 -/-
VESA, 800 x 600 37.9 60.0 40.0 +/+
VESA, 800 x 600 46.9 75.0 49.5 +/+
VESA, 1024 x 768 48.4 60.0 65.0 -/-
VESA, 1024 x 768 60.0 75.0 78.8 +/+
VESA, 1152 x 864 67.5 75.0 108.0 +/+
VESA, 1280 x 1024 64.0 60.0 108.0 +/+
VESA, 1280 x 1024 80.0 75.0 135.0 +/+
VESA, 1680 x 1050 65.2 60.0 146.0 -/+
VESA, 1680 x 1050 82.3 75.0 187.0 -/+
Electrical Specifications
Model P1913/P1913S/P2213
Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input impedance
Digital DVI-D TMDS, 600 mV for each differential line, positive polarity at 50 ohm input
Video input signals impedance
DP 1.2 signal input support*
Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG (Composite
Synchronization input signals
SYNC on green)
AC input voltage/frequency/current 100 VAC to 240 VAC / 50 Hz or 60 Hz + 3 Hz / 1.5 A (typical)
120 V : 30 A (Max)
Inrush current 240 V : 60 A (Max)
*Support DP1.2 (CORE) specification. Excludes High Bit Rate 2 (HBR2), Fast AUX transaction, Multi-stream transport (MST), 3D stereo transport , HBR Audio (or high data rate
audio)
Physical Characteristics
Model P1913 P1913S P2213
15-pin D-subminiature, blue 15-pin D-subminiature, blue 15-pin D-subminiature, blue

Connector type connector; DVI-D, white connector; connector; DVI-D, white connector; connector; DVI-D, white connector;
DP, black connector DP, black connector DP, black connector
Digital: detachable, DVI-D, Digital: detachable, DVI-D, Digital: detachable, DVI-D,
solid pins, shipped detached solid pins, shipped detached solid pins, shipped detached
from the monitor from the monitor from the monitor
Signal cable Digital: DisplayPort, 20pin Digital: DisplayPort, 20pin Digital: DisplayPort, 20pin
type Analog: attachable, D-Sub, Analog: attachable, D-Sub, Analog: attachable, D-Sub,
15 pins, shipped attached to 15 pins, shipped attached to 15 pins, shipped attached to
the monitor the monitor the monitor
Dimensions (with stand)
Height
476.4 mm ( 18.76 inches) 500.1 mm (19.69 inches) 497.4 mm (19.58 inches)
(extended)
Height
(compressed)
Width 443.8 mm (17.47 inches) 411.9 mm (16.22 inches) 510.4 mm (20.09 inches)
Depth 183.3 mm (7.22 inches) 183.3 mm (7.22 inches) 183.3 mm (7.22 inches)
Dimensions (without stand)
Height 290.8 mm (11.45 inches) 336.7 mm (13.26 inches) 332.7 mm (13.10 inches)
Stand dimensions
Height
(extended)
Height
(compressed)
Weight
Weight with
5.87 kg (12.91 lb) 6.75 kg (14.85 lb) 7.43 kg (16.35 lb)
packaging
Weight with
stand assembly 4.75 kg (10.45 lb) 5.23 kg (11.51 lb) 5.71 kg (12.56 lb)
and cables
Weight without
stand assembly
(For wall mount
2.52 kg (5.54 lb) 2.95 kg (6.49 lb) 3.43 kg (7.55 lb)
or VESA mount
considerations -
no cables)
Weight of stand
1.73 kg (3.81 lb) 2.00 kg (4.40 lb) 1.73 kg (3.81 lb)
assembly
Black Frame - 5.0 gloss unit (max.)
Front frame gloss Silver Frame - 20.0 gloss unit (max.)
Environmental Characteristics
Model P1913 P1913S P2213
Temperature
Operating 0 °C to 40 °C
Storage: -20 °C to 60 °C (-4 °F to 140 °F)

Non-operating Shipping: -20 °C to 60 °C (-4 °F to 140 °F)
Humidity
Operating 10% to 80% (non-condensing)
Storage: 5% to 90% (non-condensing)

Non-operating Shipping: 5% to 90% (non-condensing)
Altitude
Operating 3,048 m (10,000 ft) max
Non-operating 10,668 m (35,000 ft) max 10,668 m (35,000 ft) max 10,668 m (35,000 ft) max
143.31 BTU/hour 143.31 BTU/hour 153.59 BTU/hour

(maximum) (maximum) (maximum)
Thermal dissipation 58.01 BTU/hour 58.01 BTU/hour 85.33 BTU/hour
(typical) (typical) (typical)
Power Management Modes

If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to
as Power Save Mode*. If the computer detects input from the keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows
the power consumption and signaling of this automatic power saving feature:
VESA Horizontal Vertical Video Power Power Consumption

Modes Sync Sync Indicator P1913 P1913S P2213
Normal Active Active Active Blue 42 W (maximum) ** 42 W (maximum) ** 45 W (maximum) **
operation 17 W (typical) 17 W (typical) 25 W (typical)
Active-off
Inactive Inactive Blanked Amber Less than 0.3 W Less than 0.3 W Less than 0.3 W
mode
Switch off - - - Off Less than 0.3 W Less than 0.3 W Less than 0.3 W
The OSD functions only in the normal operation mode. When any button is pressed in the Active-off mode, one of the following messages will be displayed:
Activate the computer and the monitor to gain access to the OSD.
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
** Maximum power consumption with max luminance, Dell Soundbar, and USB active.
Pin Assignments
VGA Connector
Pin 15-pin Side of the Connected Signal Cable

Number
1 Video-Red
2 Video-Green
3 Video-Blue
4 GND
5 Self-test
6 GND-R
7 GND-G
8 GND-B
9 Computer 5 V/3.3 V
10 GND-sync
11 GND
12 DDC data
13 H-sync
14 V-sync
15 DDC clock

DVI Connector
Pin 24-pin Side of the Connected Signal Cable

Number
1 TMDS RX2-
2 TMDS RX2+
3 TMDS Ground
4 Floating
5 Floating
6 DDC Clock
7 DDC Data
8 Floating
9 TMDS RX1-
10 TMDS RX1+
11 TMDS Ground
12 Floating
13 Floating
14 +5 V/+3.3 V power
15 Self test
16 Hot Plug Detect
17 TMDS RX0-
18 TMDS RX0+
19 TMDS Ground
20 Floating
21 Floating
22 TMDS Ground
23 TMDS Clock+
24 TMDS Clock-
DisplayPort Connector
Pin Number 20-pin Side of the Connected

Signal Cable
1 ML0(p)
2 GND
3 ML0(n)
4 ML1(p)
5 GND
6 ML1(n)
7 ML2(p)
8 GND
9 ML2(n)
10 ML3(p)
11 GND
12 ML3(n)
13 GND
14 GND
15 AUX(p)
16 GND
17 AUX(n)
18 HPD
19 Re-PWR
20 PWR
Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID)
using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different
settings if desired. For more information about changing the monitor settings, see Operating the Monitor.
Universal Serial Bus (USB) Interface

This section gives you information about the USB ports that are available on the monitor.
NOTE: This monitor supports High-Speed Certified USB 2.0 interface.
Transfer Speed Data Power Consumption

Rate
High speed 480 Mbps 2.5 W (Max, each port)
Full speed 12 Mbps 2.5 W (Max, each port)
Low speed 1.5 Mbps 2.5 W (Max, each port)
USB Upstream Connector

Pin Number 4-pin Side of the Connector
1 DMU
2 VCC
3 DPU
4 GND
USB Downstream Connector
Pin Number 4-Pin Side of the Signal Cable

1 VCC
2 DMD
3 DPD
4 GND
USB Ports
1 upstream - back
2 downstream - back
NOTE: USB 2.0 functionality requires a USB 2.0-capable computer.

NOTE: The monitor's USB interface works only when the monitor is On or in the power save mode. If you turn Off the monitor and then turn it On, the attached peripherals may
take a few seconds to resume normal functionality.
LCD Monitor Quality and Pixel Policy

During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state which are hard to see and do not affect the
display quality or usability. For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: support.dell.com.
Maintenance Guidelines
Cleaning Your Monitor
CAUTION: Read and follow the safety instructions before cleaning the monitor.
WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.
For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:
To clean your anti-static screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the anti-static coating.
Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
Use a lightly-dampened, warm cloth to clean the monitor. Avoid using detergent of any kind as some detergents leave a milky film on the monitor.
If you notice white powder when you unpack your monitor, wipe it off with a cloth.
Handle your monitor with care as a darker-colored monitor may get scratched and show white scuff marks more than a lighter-colored monitor.
To help maintain the best image quality on your monitor, use a dynamically changing screen saver and turn off your monitor when not in use.

Setting Up the Monitor

Attaching the Stand

Connecting the Monitor
Organizing Your Cables
Attaching Dell Soundbar AX510/AY511 (Optional)
Removing the Monitor Stand
Wall Mounting (Optional)
Attaching the Stand

NOTE: The stand is detached when the monitor is shipped from the factory.
NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for the set up instructions.
To attach the monitor stand:
1. Remove the cover and place the monitor on it.

2. Fit the two tabs on the upper part of the stand to the groove on the back of the monitor.
3. Press the stand till it snaps into place.
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions.
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.

Connect the blue (VGA) cable from your monitor to the computer.

NOTE: If your computer supports a white DVI connector, connect the white DVI cable to the monitor and the white DVI connector to
your computer.
NOTE: Do not connect the blue VGA or the white DVI cable to the computer at the same time.
2. Connect the white (digital DVI-D) or the blue (analog VGA) or the black (DisplayPort) display connector cable to the corresponding video port on the back of your
computer. Do not use the three cables on the same computer. Use all cables only when they are connected to three different computers with appropriate video
systems.

Connecting the white DVI cable
Connecting the blue VGA cable
Connecting the black DisplayPort cable

CAUTION: The graphics are used for the purpose of illustration only. Appearance of the computer may vary.
Connecting the USB cable

After you have completed connecting the DVI/VGA cable, follow the procedures below to connect the USB cable to the computer and complete your monitor setup:
1. Connect the upstream USB port (cable supplied) to an appropriate USB port on your computer. (See bottom view for details.)
2. Connect the USB peripherals to the downstream USB ports on the monitor.
3. Plug the power cables for your computer and monitor into a nearby outlet.
4. Turn on the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display an image, see Solving Problems.
5. Use the cable slot on the monitor stand to organize the cables.

Organizing Your Cables
After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) organize all cables as shown above.
Attaching Dell Soundbar AX510/AY511 (Optional)

CAUTION: Do not use with any device other than the Dell Soundbar.
NOTE: The Soundbar power connector (+12 V DC output) is for the optional Dell Soundbar only.
To attach the Soundbar:
1. At the back of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom of the monitor.
2. Slide the Soundbar to the left until it snaps into place.
3. Connect the Soundbar with the DC power connector.
4. Insert the mini stereo plug from the back of the Soundbar into the computer's audio output port.
For HDMI/DP, you can insert the mini stereo plug into the monitor’s audio output port. If there is no sound, check your PC if the Audio output is configured to
HMDI/DP output.
Removing the Monitor Stand

NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a soft, clean surface.
NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for the set-up instructions.
To remove the stand:
1. Place the monitor on a flat surface.

2. Press and hold the stand release button.
3. Lift the stand up and away from the monitor.
Wall Mounting (Optional)
(Screw dimension: M4 x 10 mm).
Refer to the instructions that come with the VESA-compatible wall mounting kit.
1. Place the monitor panel on a soft cloth or cushion on a stable, flat table.
2. Remove the stand.
3. Use a Philips crosshead screwdriver to remove the four screws securing the plastic cover.
4. Attach the mounting bracket from the wall mounting kit to the monitor.
5. Mount the monitor on the wall by following the instructions that comes with the wall mounting kit.
NOTE: For use only with UL-listed wall mount bracket with minimum weight/load bearing capacity of 5.88 kg.

Operating the Monitor

Power On the Monitor

Using the Front Panel Controls
Using the On-Screen Display (OSD) Menu
Setting the Maximum Resolution
Using Dell Soundbar
Using the Tilt, Swivel, and Vertical Extension
Rotating the Monitor
Adjusting the Rotation Display Settings of Your System
Power On the Monitor

Press the button to turn on the monitor
Using the Front Panel Controls

Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the numeric values
of the characteristics as they change.
The following table describes the front panel buttons:
Front Panel Button Description
1 Use this button to choose from a list of preset color modes.

Shortcut
key/Preset
Modes
2 Use this button to directly access the "Brightness/Contrast" menu.
Shortcut key/
Brightness/Contrast
3 Use the MENU button to launch the On-Screen Display (OSD) and select the OSD Menu. See Accessing the Menu System.
Menu
4 Use this button to go back to the main menu or exit the OSD main menu.
Exit
Use the Power button to turn the monitor On and Off.

5
The blue LED indicates the monitor is On and fully functional. An amber LED indicates the power save mode.
Power
(with power light
indicator)
Front Panel Button
Use the buttons on the front of the monitor to adjust the image settings.
Front Panel Button Description
1 Use the Up button to adjust (increase ranges) items in the OSD menu.
Up
2 Use the Down button to adjust (decrease ranges) items in the OSD menu.
Down
3 Use the OK button to confirm your selection.
OK
4 Use the Back button to go back to the previous menu.
Back
Using the On-Screen Display (OSD) Menu
Accessing the Menu System

NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you
change the settings and then wait for the OSD menu to disappear.
1. Press the button to launch the OSD menu and display the main menu.
Main Menu for analog (VGA) input
or
Main Menu for digital (DVI) input

or
Main Menu for digital (DP) input

NOTE: Auto Adjust is only available when you use the analog (VGA) connector.
NOTE: For P1913, the maximum resolution is 1440 x 900 @ 60Hz. For P1913S, the maximum resolution is 1280 x 1024 @ 60Hz.
2. Press the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the following table for a complete list
of all the options available for the monitor.
3. Press the button once to activate the highlighted option.
4. Press and button to select the desired parameter.
5. Press to enter the slide bar and then use the and buttons, according to the indicators on the menu, to make your changes.
6. Select the button to return to the main menu.
Icon Menu and Submenus Description

Brightness/Contrast Use this menu to activate Brightness/Contrast adjustment.
Brightness Brightness adjusts the luminance of the backlight.
Press the button to increase the brightness and press the button to decrease the brightness (min 0 / max 100).
NOTE: Manual adjustment of Brightness is disabled when Energy Smart or Dynamic Contrast is switched On.
Contrast Adjust the Brightness first, and then adjust the Contrast only if further adjustment is necessary.
Press the button to increase the contrast and press the button to decrease the contrast (min 0 / max 100).
The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.
Auto Adjust Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your
particular setup.
Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor
by using the Pixel Clock (Coarse) and Phase (Fine) controls under Display Settings.
NOTE: In most cases, Auto Adjust produces the best image for your configuration.
NOTE: Auto Adjust option is only available when you are using the analog (VGA) connector.
Input Source Use the Input Source menu to select between the different video signals that may be connected to your monitor.
Auto Select
Press to select Auto Select, the monitor auto detects either the VGA input or the DVI-D input or DislpayPort input.
VGA
Select the VGA input when you are using the analog (VGA) connector. Press to select the VGA input source.
DVI-D
Select the DVI-D input when you are using the Digital (DVI) connector. Press to select the DVI input source.
DisplayPort
Select the DisplayPort input when you are using the DisplayPort (DP) connector. Press to select the DisplayPort input source.
Color Settings Use Color Settings to adjust the color setting mode.
Input Color Format Allows you to set the video input mode to:
RGB: Select this option if your monitor is connected to a computer or DVD player using the VGA and DVI cable.
YPbPr: Select this option if your monitor is connected to a DVD player by YPbPr to VGA, or YPbPr to DVI cable; or if the DVD color output setting
is not RGB.
Preset Modes When you select Preset Modes, you can choose Standard, Multimedia, Movie, Game, Text, Warm, Cool or Custom Color from the list.
Standard: Loads the monitor's default color settings. This is the default preset mode.
Multimedia: Loads color settings ideal for multimedia applications.
Movie: Loads color settings ideal for movies.
Game: Loads color settings ideal for most gaming applications.
Text: Loads brightness and sharpness settings ideal for viewing texts.
Warm: Increase the color temperature. The screen appears warmer with a red/yellow tint.
Cool: Decreases the color temperature. The screen appears cooler with a blue tint.
Custom Color: Allows you to manually adjust the color settings. Press the and buttons to adjust the three colors (R, G, B)
values and create your own preset color mode.
Hue
This feature can shift the color of the video image to green or purple. This is used to adjust the desired flesh tone color. Use or to
adjust the hue from '0' to '100'.
Press to increase the green shade of the video image.
Press to increase the purple shade of the video image.
NOTE: Hue adjustment is available only when you select Movie or Game preset mode.
Saturation
This feature can adjust the color saturation of the video image. Use or to adjust the saturation from '0' to '100'.
Press to increase the monochrome appearance of the video image.
Press to increase the colorful appearance of the video image.
NOTE: Saturation adjustment is available only when you select Movie or Game preset mode.
Reset Color Settings Reset your monitor color settings to the factory settings.
Display Settings Use the Display Settings to adjust image.

NOTE: Aspect Ratio is not available in P1913S.
Aspect Ratio Adjust the image ratio to Wide 16:10, 5:4 or 4:3.
NOTE: Aspect Ratio is not available in P1913S.

Horizontal Position
Use or to adjust the image left or right. Minimum is '0' (-). Maximum is '100' (+).
Vertical Position
Use or to adjust the image up or down. Minimum is '0' (-). Maximum is '100' (+).
NOTE: Horizontal Position and Vertical Position adjustments are only available for "VGA" input.
Sharpness
This feature can make the image look sharper or softer. Use or to adjust the sharpness from '0' to '100'.
Pixel Clock The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.
Use or to adjust for best image quality.
Phase If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again.
NOTE: Pixel Clock and Phase adjustments are only available for "VGA" input.
Dynamic Contrast Dynamic Contrast adjusts the contrast ratio to 2M to 1.
Press the button to select the Dynamic Contrast "On" or "Off" .
NOTE: Dynamic Contrast provides higher contrast if you select Game or Movie preset mode.
Reset Display Settings Select this option to restore default display settings.
Other Settings Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on screen, and so
on.
Language Language options set the OSD display to one of the eight languages (English, Spanish, French, German, Brazilian Portuguese, Russian, Simplified
Chinese or Japanese).
Menu Transparency
Select this option to change the menu transparency by pressing the and buttons (Minimum: 0 ~ Maximum: 100).
Menu Timer OSD Hold Time: sets the length of time the OSD will remain active after the last time you pressed a button.
Use or to adjust the slider in 1 second increments, from 5 to 60 seconds.

Menu Lock Controls user access to adjustments. When Lock is selected, no user adjustments are allowed. All buttons are locked.
NOTE:
Lock function – Either soft lock (through the OSD menu) or hard lock (press and hold the button above the power button for 10 seconds)
Unlock function– Only hard unlock (press and hold the button above the power button for 10 seconds)
Menu Rotation Rotates the OSD by 90 degrees counter-clockwise. You can adjust the menu according to your Display Rotation.
Energy Smart To turn on or off dynamic dimming.

The dynamic dimming feature automatically reduces the screen's brightness level when the displayed image contains a high proportion of bright
areas.
Power Save Audio To turn on or off Audio Power during Power Save mode.
DDC/CI DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance, and etc.) to be adjustable via the
software on your computer. You can disable this feature by selecting "Disable".
Enable this feature for best user experience and optimum performance of your monitor.
LCD Conditioning Helps reduce minor cases of image retention. Depending on the degree of image retention, the program may take some time to run. You can
enable this feature by selecting "Enable".
Factory Reset Reset all OSD settings to the factory preset values.
Personalize Users can choose a feature from "Preset Modes", "Brightness/Contrast", "Auto Adjust", "Input Source", "Aspect Ratio" or "Menu Rotation" and set
it as a shortcut key.
NOTE: This monitor has a built-in feature to automatically calibrate the brightness to compensate for LED aging.
OSD Warning Messages
When the Energy Smart or Dynamic Contrast feature is enabled (in these preset modes: Game or Movie), the manual brightness adjustment is disabled.
When the monitor does not support a particular resolution mode, you will see the following message:
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications for the Horizontal and Vertical frequency
ranges addressable by this monitor. Recommended mode is 1440 x 900 (for the P1913)/1280 x 1024 (for the P1913S)/1680 x 1050 (for the P2213).
You will see the following message before the DDC/CI function is disabled:
When the monitor enters the Power Save mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the OSD.
If you press any button other than the power button, one of the following messages will appear depending on the selected input:
VGA/DVI-D/DP input
If either VGA or DVI-D or DP input is selected and the corresponding cable is not connected, a floating dialog box as shown below appears.
or or
See Solving Problems for more information.
Setting the Maximum Resolution

To set the maximum resolution for the monitor:
In Windows Vista, Windows 7 , Windows 8 or Windows 8.1:
1. For Windows® 8 or Windows ® 8.1 only, select the Desktop tile to switch to classic desktop.
2. Right-click on the desktop and click Screen Resolution.
3. Click the Dropdown list of the Screen resolution and select 1440 x 900 (for the P1913)/1280 x 1024 (for the P1913S)/1680 x 1050 (for the P2213).
4. Click OK.
In Windows 10 :
1. Right-click on the desktop and click Display settings.

2. Click Advanced display settings.
3. Click the dropdown list of Resolution and select 1680 x 1050 (for the P2213).
4. Click Apply.
If you do not see the recommended resolution as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following procedures:
If you have a Dell desktop or portable computer:
Go to support.dell.com, enter your service tag, and download the latest driver for your graphics card.
If you are using a non-Dell computer (portable or desktop):
Go to the support site for your computer and download the latest graphic drivers.
Go to your graphics card website and download the latest graphic drivers.
Using Dell Soundbar
The soundbar has an on/off power and rotary volume control to adjust the overall sound system, a LED for power indication and two audio headset jacks.
1 Attach mechanism
2 Power/Volume control
3 Headphone jacks
4 Power indicator
Using the Tilt, Swivel, and Vertical Extension

NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up instructions.
Tilt, Swivel
With the stand attached to the monitor, you can tilt and swivel the monitor for the most comfortable viewing angle.
NOTE: The stand is detached when the monitor is shipped from the factory.
Vertical Extension
NOTE: The stand extends vertically up to 130 mm. The figure below illustrates how to extend the stand vertically.
Rotating the Monitor
Before you rotate the monitor, your monitor should be fully vertically extended (Vertical Extension) and fully tilted (Tilt) up to avoid hitting the bottom edge of the monitor.
NOTE: To use the Display Rotation function (Landscape versus Portrait view) with your Dell computer, you require an updated graphics driver that is not included with this monitor. To
download the graphics driver, go to support.dell.com and see the Download section for Video Drivers for latest driver updates.
NOTE: When in the Portrait View Mode, you may experience performance degradation in graphic-intensive applications (3D Gaming and etc.).
Adjusting the Rotation Display Settings of Your System

After you have rotated your monitor, you need to complete the procedure below to adjust the Rotation Display Settings of your System.
NOTE: If you are using the monitor with a non-Dell computer, you need to go the graphics driver website or your computer manufacturer website for information on rotating the
'contents' on your display.
To adjust the Rotation Display Settings:
1. Right-click on the desktop and click Properties.

2. Select the Settings tab and click Advanced.
3. If you have an ATI graphics card, select the Rotation tab and set the preferred rotation.
If you have an nVidia graphics card, click the nVidia tab, in the left-hand column select NVRotate, and then select the preferred rotation.
If you have an Intel® graphics card, select the Intel graphics tab, click Graphic Properties, select the Rotation tab, and then set the preferred rotation.
NOTE: If you do not see the rotation option or it is not working correctly, go to support.dell.com and download the latest driver for your graphics card.

Troubleshooting
Self-Test
Built-in Diagnostics
Common Problems
Product Specific Problems
Universal Serial Bus (USB) Specific Problems
Dell™ Soundbar Problems
WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions.
Self-Test
Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains
dark, run the monitor self-test by performing the following steps:
1. Turn off both your computer and the monitor.

2. Unplug the video cable from the back of the computer. To ensure proper self-test operation, remove all video cables from the back of computer.
3. Turn on the monitor.
The floating dialog box should appear on-screen (against a black background), if the monitor cannot sense a video signal and is working correctly. While in self-test mode, the power LED
remains blue. Also, depending upon the selected input, one of the dialogs shown below will continuously scroll through the screen.
or or
4. This box also appears during normal system operation, if the video cable becomes disconnected or damaged.
5. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.
If your monitor screen remains blank after you use the previous procedure, check your video controller and computer, because your monitor is functioning properly.
Built-in Diagnostics
Your monitor has a built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with your monitor, or with your computer and video card.
NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode.
To run the built-in diagnostics:
1. Ensure that the screen is clean (no dust particles on the surface of the screen).
2. Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self-test mode.
3. Press and hold Button 1 and Button 4 on the front panel simultaneously for 2 seconds. A gray screen appears.
4. Carefully inspect the screen for abnormalities.
5. Press Button 4 on the front panel again. The color of the screen changes to red.
6. Inspect the display for any abnormalities.
7. Repeat steps 5 and 6 to inspect the display in green, blue, black, white and text screens.
The test is complete when the white screen appears. To exit, press Button 4 again.
If you do not detect any screen abnormalities upon using the built-in diagnostic tool, the monitor is functioning properly. Check the video card and computer.
Common Problems
The following table contains general information about common monitor problems you might encounter and the possible solutions:
Common Symptoms What You Experience Possible Solutions

No Video/Power LED off No picture Ensure that the video cable connecting the monitor and the computer is properly connected and secure.
Verify that the power outlet is functioning properly using any other electrical equipment.
Ensure that the power button is depressed fully.
Ensure that the correct input source is selected via the Input Source Select button.
No Video/Power LED on No picture or no brightness Increase brightness & contrast controls via OSD.
Perform monitor self-test feature check.
Check for bent or broken pins in the video cable connector.
Run the built-in diagnostics.
Ensure that the correct input source is selected via the Input Source Select button.
Poor Focus Picture is fuzzy, blurry, or ghosting Perform Auto Adjust via OSD.
Adjust the Phase and Pixel Clock controls via OSD.
Eliminate video extension cables.
Reset the monitor to Factory Settings.
Change the video resolution to the correct aspect ratio.
Shaky/Jittery Video Wavy picture or fine movement Perform Auto Adjust via OSD.
Adjust the Phase and Pixel Clock controls via OSD.
Check environmental factors.
Relocate the monitor and test in another room.
Missing Pixels LCD screen has spots Cycle power on-off.

Pixel that is permanently off is a natural defect that can occur in LCD technology.
For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: support.dell.com.
Stuck-on Pixels LCD screen has bright spots Cycle power on-off.
Pixel that is permanently off is a natural defect that can occur in LCD technology.
For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: support.dell.com.
Brightness Problems Picture too dim or too bright Reset the monitor to Factory Settings.
Auto Adjust via OSD.
Adjust brightness & contrast controls via OSD.
Geometric Distortion Screen not centered correctly Reset the monitor to Factory Settings.
Auto Adjust via OSD.
Adjust horizontal & vertical controls via OSD.
NOTE: When using DVI-D/DisplayPort input, the positioning adjustments are not available.
Horizontal/Vertical Lines Screen has one or more lines Reset the monitor to Factory Settings.
Perform Auto Adjust via OSD.
Adjust Phase and Pixel Clock controls via OSD.
Perform monitor self-test feature check and determine if these lines are also in self-test mode.
NOTE: When using DVI-D/DisplayPort input, the Pixel Clock and Phase adjustments are not available.
Synchronization Problems Screen is scrambled or appears torn Reset the monitor to Factory Settings.
Perform Auto Adjust via OSD.
Adjust Phase and Pixel Clock controls via OSD.
Perform monitor self-test feature check to determine if the scrambled screen appears in self-test mode.
Restart the computer in the safe mode.
Safety Related Issues Visible signs of smoke or sparks Do not perform any troubleshooting steps.
Contact Dell immediately.
Intermittent Problems Monitor malfunctions on & off Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.
Perform monitor self-test feature check to determine if the intermittent problem occurs in self-test mode.
Missing Color Picture missing color Perform monitor self-test feature check.
Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.
Wrong Color Picture color not good Change the Color Setting Mode in the Color Settings OSD to Graphics or Video depending on the application.
Try different Color Preset Settings in Color Settings OSD. Adjust R/G/B value in Color Settings OSD if the Color
Management is turned off.
Change the Input Color Format to PC RGB or YPbPr in the Advance Setting OSD.
Image retention from a static image Faint shadow from the static image Use the Power Management feature to turn off the monitor at all times when not in use (for more information,
left on the monitor for a long period of displayed appears on the screen see Power Management Modes).
time Alternatively, use a dynamically changing screensaver.
Product Specific Problems

Specific Symptoms What You Experience Possible Solutions
Screen image is too small Image is centered on screen, but does Check the Scaling Ratio setting in the Image Setting OSD.
not fill entire viewing area Reset the monitor to Factory Settings.
Cannot adjust the monitor with the OSD does not appear on the screen Turn off the monitor, unplug the power cord, plug it back, and then turn on the monitor.
buttons on the front panel Check whether the OSD menu is locked. If yes, press and hold the button above the Power button for 10
seconds to unlock (for more information, see Menu Lock).
No Input Signal when user controls are No picture, the LED light is blue. Check the signal source. Ensure the Computer is not in the power saving mode by moving the mouse or pressing
pressed any key on the keyboard.
Check whether the signal cable is plugged in properly. Re-plug the signal cable if necessary.
Reset the computer or video player.
The picture does not fill the entire The picture cannot fill the height or Due to different video formats (aspect ratio) of DVDs, the monitor may display in full screen.
screen. width of the screen Run the built-in diagnostics.
NOTE: When choosing DVI-D mode, the Auto Adjust function will not be available.
Universal Serial Bus (USB) Specific Problems

Specific Symptoms What You Experience Possible Solutions
USB interface is not working USB peripherals are not working Check that your monitor is turned ON.
Reconnect the upstream cable to your computer.
Reconnect the USB peripherals (downstream connector).
Switch off and then turn on the monitor again.
Reboot the computer.
Some USB devices like external portable HDD require higher electric current; connect the device directly to the
computer system.
High Speed USB 2.0 interface is slow. High Speed USB 2.0 peripherals Check that your computer is USB 2.0-capable.
working slowly or not working at all Some computers have both USB 2.0 and USB 1.1 ports. Ensure that the correct USB port is used.
Reconnect the upstream cable to your computer.
Reconnect the USB peripherals (downstream connector).
Reboot the computer.
Dell™ Soundbar Problems

Common Symptoms What You Experience Possible Solutions
No Sound No power to Soundbar - the power Turn the Power/Volume knob on the Soundbar clockwise to the middle position; check if the power indicator
indicator is off (Blue LED) on the front of the Soundbar is illuminated.
Confirm that the power cable from the Soundbar is plugged into the adapter.
No Sound Soundbar has power - power indicator Plug the audio line-in cable into the computer's audio out jack.
is on Set all Windows volume controls to their maximum.
Play some audio content on the computer (i.e. audio CD, or MP3).
Turn the Power/Volume knob on the Soundbar clockwise to a higher volume setting.
Clean and reseat the audio line-in plug.
Test the Soundbar using another audio source (i.e. portable CD player).
Distorted Sound Computer's sound card is used as the Clear any obstructions between the Soundbar and the user.
audio source Confirm that the audio line-in plug is completely inserted into the jack of the sound card.
Set all Windows volume controls to their midpoints.
Decrease the volume of the audio application.
Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume setting.
Troubleshoot the computer's sound card.
Distorted Sound Other audio source is used Clear any obstructions between the Soundbar and the user.
Confirm that the audio line-in plug is completely inserted into the jack of the audio source.
Decrease the volume of the audio source.
Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume setting.
Unbalanced Sound Output Sound from only one side of Soundbar Clear any obstructions between the Soundbar and the user.
Confirm that the audio line-in plug is completely inserted into the jack of the sound card or audio source.
Set all Windows audio balance controls (L-R) to their midpoints.
Troubleshoot the computer's sound card.
Low Volume Volume is too low Clear any obstructions between the Soundbar and the user.
Turn the Power/Volume knob on the Soundbar clockwise to the maximum volume setting.
Set all Windows volume controls to their maximum.
Increase the volume of the audio application.

Appendix
Safety Instructions
FCC Notice (U.S. Only) and Other Regulatory Information
Contacting Dell
WARNING: Safety Instructions

WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical
hazards, and/or mechanical hazards.
For information on safety instructions, see the Product Information Guide.
FCC Notices (U.S. Only) and Other Regulatory Information

For FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.com\regulatory_compliance.
Contacting Dell
For customers in the United States, call 800-WWW-DELL (800-999-3355).
NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog.
Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be
available in your area. To contact Dell for sales, technical support, or customer service issues:
1. Visit support.dell.com.
2. Verify your country or region in the Choose A Country/Region drop-down menu at the bottom of the page.
3. Click Contact Us on the left side of the page.
4. Select the appropriate service or support link based on your need.
5. Choose the method of contacting Dell that is convenient for you.

Setting Up Your Monitor

Setting the display resolution

For maximum display performance with Microsoft ® Windows ® operating systems, set the display resolution to 1440 x 900 (for the P1913)/1280 x
1024 (for the P1913S)/1680 x 1050 (for the P2213) pixels by performing the following steps:
2. Right-click on the desktop and click Screen Resolution.
3. Click the Dropdown list of the Screen resolution and select 1440 x 900 (for the P1913)/1280 x 1024 (for the P1913S)/1680 x 1050 (for the
P2213).
4. Click OK.
In Windows 10 :

3. Click the dropdown list of Resolution and select 1680 x 1050 (for the P2213).
4. Click Apply.
If you do not see the recommended resolution as an option, you may need to update your graphics driver. Please choose the scenario below that best
describes the computer system you are using, and follow the given steps.
1: If you have a Dell™ desktop or a Dell™ portable computer with internet access.
2: If you have a non Dell™ desktop, portable computer, or graphics card.


If you have a Dell™ desktop or a Dell™ portable computer with internet access
1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card.
2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1440 x 900 (for the P1913)/1280 x 1024 (for the
P1913S)/1680 x 1050 (for the P2213) again.
NOTE: If you are unable to set the resolution to 1440 x 900/1280 x 1024/1680 x 1050, please contact Dell™ to inquire about a Graphics Adapter that
supports these resolutions.


If you have a non Dell™ desktop, portable computer, or graphics card

2. Right-click on the desktop and click Personalization.
3. Click Change Display Settings.
4. Click Advanced Settings.
5. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).
6. Refer to the graphic card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVIDIA.com ).
7. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1440 x 900 (for the P1913)/1280 x 1024 (for the
P1913S)/1680 x 1050 (for the P2213) again.
In Windows 10:

3. Click Display adapter properties.
4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).
5. Refer to the graphic card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVIDIA.com ).
6. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1680 x 1050 (for the P2213) again.
NOTE: If you are unable to set the recommended resolution, please contact the manufacturer of your computer or consider purchasing a graphics
adapter that will support the video resolution.

Dell-P1913s User's Guide En-Us

Uploaded by

Document Informationclick to expand document information

Document Informationclick to expand document information

Copyright:

Available Formats

Dell-P1913s User's Guide En-Us

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dell-P1913s User's Guide En-Us

Uploaded by

Copyright:

Available Formats

Dell™ P1913/P1913S/P2213 Monitor

Setting the display resolution

Information in this document is subject to change without notice.

July 2016 Rev. A05

Setting Up the Monitor

Operating the Monitor

Notes, Cautions, and Warnings

Information in this document is subject to change without notice.

About Your Monitor

NOTE: P1913/P1913S/P2213 monitor is BFR/PVC-free (Halogen-free) excluding external cables.

VGA Cable (Attached to the monitor)

USB upstream cable (enables the USB ports on the monitor)

■ Tilt, swivel, vertical extension and rotate adjustment capability.

■ Plug and play capability if supported by your system.

■ Asset Management Capability.

■ P1913/P1913S/P2213 monitor is BFR/PVC-free (Halogen-free) excluding external cables.

■ Arsenic-Free glass and Mercury-Free for the panel only.

■ High Dynamic Contrast Ratio (2,000,000:1).

■ 0.3 W standby power when in the sleep mode.

Front panel controls

Back View with monitor stand

Label Description Use

6 Dell Soundbar mounting brackets Attaches the optional Dell Soundbar.

Bottom view without monitor stand

Label Description Use

1 AC power cord connector Connect the power cable.

Flat Panel Specifications

Model P1913 P1913S P2213

Pixel pitch 0.2835 mm 0.294 mm 0.282 mm

160° (vertical) typical 160° (vertical) typical 160° (vertical) typical

1000 to 1 (typical) 1000 to 1 (typical) 1000 to 1 (typical)

Color gamut 83%* 83%* 83%*

Model P1913 P1913S P2213

Horizontal scan range 30 kHz to 81 kHz (automatic) 30 kHz to 83 kHz (automatic)

Vertical scan range 56 Hz to 76 Hz (automatic) 56 Hz to 75 Hz (automatic)

Maximum preset resolution 1440 x 900 at 60 Hz 1280 x 1024 at 60 Hz 1680 x 1050 at 60 Hz

Supported Video Modes

Preset Display Modes

VESA, 640 x 480 31.5 60.0 25.2 -/-

VESA, 640 x 480 37.5 75.0 31.5 -/-

VESA, 800 x 600 37.9 60.3 40.0 +/+

VESA, 800 x 600 46.9 75.0 49.5 +/+

VESA, 1024 x 768 60.0 75.0 78.8 +/+

VESA, 1152 x 864 67.5 75.0 108.0 +/+

VESA, 1280 x 800 49.3 59.9 71.0 +/-

VESA, 1280 x 1024 64.0 60.0 108.0 +/+

VESA, 1280 x 1024 80.0 75.0 135.0 +/+

VESA, 1440 x 900 55.5 60.0 106.5 -/+

VESA, 1440 x 900 70.6 75.0 136.8 -/+

VESA, 640 x 480 31.5 60.0 25.2 -/-

VESA, 640 x 480 37.5 75.0 31.5 -/-

VESA, 800 x 600 37.9 60.3 40.0 +/+

VESA, 800 x 600 46.9 75.0 49.5 +/+

VESA, 1024 x 768 48.4 60.0 65.0 -/-

VESA, 1024 x 768 60.0 75.0 78.8 +/+

VESA, 1152 x 864 67.5 75.0 108.0 +/+

VESA, 1280 x 1024 64.0 60.0 108.0 +/+