Our policy is one of continuous development. Accordingly the design of our products may change at any time.

Whilst every effort is made to produce up to date literature, this document should only be regarded as a guide and is intended
for information purposes only.
Its contents do not constitute an offer for sale or advice on the application of any product referred to in it. We cannot be held
responsible for any reliance on any decisions taken on its contents without specific advice.
Order form MiCOM P141
Ready-to-use configuration

Feeder Management P141 M **

Vx Auxiliary Rating
24 - 32Vdc 9
48 - 110Vdc 2
110 - 250Vdc (100 - 240Vac) 3

In/Vn Rating
In = 1/5A, Vn = 100 - 120Vac 1
In = 1/5A, Vn = 380 - 480Vac (Min 196Vac Max 560Vac) 2

Hardware Options
Standard - None 1
IRIG-B - (Modulated) Only 2
Courier Rear Port 7
IRIG-B (Modulated) & Courier Rear Port 8
InterMiCOM + Courier Rear Port E
InterMiCOM + Courier Rear Port + IRIG-B modulated F
Redundant Ethernet RSTP, 2 multi-mode fibre ports + Modulated IRIG-B J
Redundant Ethernet RSTP, 2 multi-mode fibre ports + Un-modulated IRIG-B K
Redundant Ethernet (100Mbit/s) PRP or HSR and Dual IP, 2 LC ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B Q
Redundant Ethernet (100Mbit/s) PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B R
Ethernet (100Mbit/s), 1 RJ45 port + Modulated/Un-modulated IRIG-B S

Product Specific Option

8 logic inputs & 7 relay outputs A
8 logic inputs & 8 relay outputs N

Protocol / Communications Options

K-Bus with simple password management - CSL0 1
Modbus with simple password management - CSL0 2
IEC 60870-5-103 (VDEW) with simple password management - CSL0 3
DNP3.0 with simple password management - CSL0 4
IEC 61850 Edition 1 / 2 and Courier via rear K-Bus/RS485 with simple password management - CSL0 6
IEC 61850 Edition 1 / 2 and CS103 via rear port RS485 with simple password management - CSL0 7
IEC 61850 Edition 1 / 2 and DNP3 over Ethernet and DNP3.0 via rear RS485 with simple password management - CSL0 B
IEC 61850 Edition 1 / 2 and Courier via rear K-Bus/RS485 with advanced Cyber Security - CSL1 - Security Administration Tool (SAT)
G
required
IEC 61850 Edition 1 / 2 and CS103 via rear port RS485 with advanced Cyber Security - CSL1 - Security Administration Tool (SAT)
H
required
IEC 61850 Edition 1 / 2 and DNP3 over Ethernet and DNP3.0 via rear RS485 with advanced Cyber Security - CSL1 - Security
L
Administration Tool (SAT) required

Mounting Option
Flush Panel Mounting, M

Multilingual Language Option

English, French, German, Spanish 0
English, French, German, Russian 5
Chinese, English or French via HMI, with English or French only via Communications port C

Software Issue **

Customisation
Default 8
Customer specific 9

12/09/2021
Order form configurator MiCOM P141
Ready-to-use configuration

1-4 5 6 7 8 9 10 11 12-13 14 15

Feeder Management Relay P141 3 1 R N 6 M 0 B5 8 L

SAP PART NUMBER E14131RN6M0B58L
Design Suffix
L: Phase 3 CPU L
J: Grey/Grey case, dual characteristic opto inputs, IEC61850, InterMiCOM
Software
B5:
B4:
B3:
B2: B5
B0:
A1:
A0:
Vx Aux Rating
24 - 32Vdc 3
48 - 110Vdc
110 - Rating
In/Vn 250Vdc (100 - 240Vac)

In = 1/5A, Vn = 100-120Vac
In = 1/5A, Vn = 380-480Vac (Min 196Vac Max 560Vac) 1

Hardware Options
Standard - None
IRIG-B (Modulated) Only
Courier Rear Port
IRIG-B (Modulated) & Courier Rear Port R
InterMiCOM + Courier Rear Port
InterMiCOM + Courier Rear Port + IRIG-B modulated
Redundant Ethernet (100Mbit/s) PRP or HSR or RSTP and Dual IP, 2 LC ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B + IEEE1588
Product
Redundant Specific Options
Ethernet (100Mbit/s) PRP or HSR or RSTP and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B + IEEE1588
Ethernet (100Mbit/s), 1 RJ45
8 logic inputs & 7 relay port + Modulated/Un-modulated IRIG-B + IEEE1588
outputs N
8 logic inputs & 8 relay outputs
Protocol/Communications Options
IEC 61850 Edition 1 / 2 and Courier via rear K-Bus/RS485 with simple password management - CSL0
IEC 61850 Edition 1 / 2 and CS103 via rear RS485 with simple password management - CSL0
IEC 61850 Edition 1 / 2 and DNP3 over Ethernet and DNP3.0 via rear RS485 with simple password management - CSL0 6
IEC 61850 Edition 1 / 2 and Courier via rear K-Bus/RS485 with advanced Cyber Security - CSL1 - Security Administration Tool (SAT) required
IEC 61850 Edition 1 / 2 and CS103 via rear port RS485 with advanced Cyber Security - CSL1 - Security Administration Tool (SAT) required
Mounting Option1 / 2 and DNP3 over Ethernet and DNP3.0 via rear RS485 with advanced Cyber Security - CSL1 - Security Administration Tool (SAT) required
IEC 61850 Edition
Flush Panel Mounting M
Language
Multilingual - English, French, German, Spanish 0
Multilingual - English, French, German, Russian
Chinese, English or French via HMI with English or French only via Communications port
Customisation
Default 8
Customer Specific

12/09/2021
 Master Text

P14131RN6M0B58L

Feeder Management Relay

Vx Nominal auxiliary voltage options :

110 - 250Vdc (100 - 240Vac)
In/Vn Rating options :
In = 1/5A, Vn = 100-120Vac
Hardware options :
Redundant Ethernet (100Mbit/s) PRP or HSR or RSTP and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B + IEEE1588
Product specific options :
8 logic inputs & 8 relay outputs
Protocol options :
IEC 61850 Edition 1 / 2 and Courier via rear K-Bus/RS485 with simple password management - CSL0
Mounting options :
Flush Panel Mounting,
Language options :
Multilingual - English, French, German, Spanish
Software options :
B5
Customisation :
Default

ATEX II (2) G

Page 4 of 11 563097730.xls 12/09/2021

22/08/19
15/07/19
18/09/18
30/06/18
09/05/18
02/01/18
12/12/17
06/11/17
08/08/16
13/07/16
24/09/15
12/05/15
27/11/14
08/07/14
04/02/14
25/06/13
01/10/12
11/09/12
21/08/12
09/08/12
09/07/12
02/06/12
08/05/12
10/03/12
13/02/12
06/02/12
21/11/11
13/09/11
09/08/11
20/02/11
04/10/10
18/08/10
06/08/10
10/06/10
05/05/10
10/02/10
29/01/10
02/12/09
08/05/09
01/04/09
04/03/09
18/12/08
01/12/08
27/08/08
12/08/08
01/07/08
18/03/08
06/03/08
12/04/07
10/02/07
08/01/07

04/08/06

24/07/06
01/06/06

21/03/06
26/10/05
10/10/05
21/03/05
20/12/04
06/12/04
12/10/04
23/06/04
14/06/04

04/05/04
03/05/04
15/03/04
11/03/04
20/02/04
18/02/04
19/01/04
17/11/03
13/09/03
11/04/03
18/02/03
07/11/02
15/08/02
01/06/02
30/11/01
30/11/01
30/11/01
PEP0547434R released B5 software version
Corrective action to Protocol = '9' options which was showing available incorrectly on some earlier s/w versions
SW 'B4' released
Hardware option B removed from offer as per PWP program
Obsolescence warning added to hardware options = B
Obsolescence actions : hardware options 3,4,6,A,G,H,L,M,N,P all removed from offer
PEP0127513N releases B3 software version
Obsolescence warning added
CZHO-ACB869 release of B2 software version
XLAZ-A9Z4AH releases software version A1
CZHO-A2L588 release B0 SW to WPF site for manufacture
CZHO-9W9AWT releases B0 SW with Hardware Options Q,R & S
As per NALW-9Q3DKQ - P140VA0A Major Software Release
As per SBIA-9KBCL4 new power supply option released (9) with (1) removed from option
As per DKEG-9FJDJW power supply voltage amended from 24-48Vdc to 24-32Vdc
SBIA-98UAW2 releases PRP options
"Stand alone non modulated IRIG-B" (digit 7 = C) withdrawn from offer as per Obsolescence program
GN9025 removed from BOM (no longer used)
HMI assembly amended from GN0178001 to 2072033A01 as per JGAR-8X7AQ8
Vx auxiliary rating amended to 48 - 110 Vdc (from 48-110Vdc (40-100Vac)) per CBUN-8WXJKE
Design suffix C & G options removed from offer as per Obsolescence Program
2071962A01 replaces ZN0019001 and 2071966A01 replaces ZN0031001 as per SBIA-8URHXU
Obsolescence warning added to suffix C & G options
PSUs amended to 2071964xxx as per SBIA-8S6A9S
Tendering sheet added
Obsolescence warning added to "Stand alone non modulated IRIG-B" (digit 7 = C) as per latest obsoletion notice
SW Version 21 released to SMC production, per approved TOMAS request 213
SW Version 46 released to production, incorporates rebrand and several other enhancements
Update as per latest AG obsoletion notice
Reworked for Schneider Electric requirements
References to Alstom and Areva removed. 'Settings files' changed to 'Customisation'
Lookup correction for Suffix 'G' & UCA2 Protocol
BOM rules clarified on change for AS above
CID ISTE-85VFU7 removes software versions '10' & '16'
PCB descriptions on BOM clarified
44' Software released by CID ISTE-82HLT5, includes model 'N'
BOM modified in line with PWIG-7ZHCJK making ZN0031001 a model list variable
Redundant Ethernet optons made available, see CIDs ISTE-7YAMBJ & SKEL-7YBM34
43' Software released, Redundant Ethernet optons added though set as 'not available', see CID ISTE-7RMDSS
Lookup array on database for Master Text "hardware options" corrected
Vx rating changed in line with CID BLIN-7P7HJX
Correction to lookup address for Protocols (did use "HLOOKUP('Date Drivers'!$B$1,'Date Drivers'!$B$2:$Y$18,9) for DNP3.0
"42…J" software released by CID ISTE-7LCFEC, also restriction to protocol availability on version '17' software, see CID ISTE
BOM retrospectively amended to include GN0178001AREVA for G Suffix, Russian language options
Explanatory text retrospectively added to '35' software per G Evans
"41…J" software released by CID GEVA-7FZEF2, BOM rules corrected for UI & suffix 'G'
Software versions prior to '05' removed from Cortec to maintain concordance with Software History and Compatibility database
"40…J" software released by CID GEVA-7CEFKM
"36…J" software released by CID GEVA-726JEM
Chinese language version was not included in Software Version '35' options
Cortec & Date Drivers retrospectively amended to show revised text for IEC 61850 Comms Protocol (was "IEC 61850" only)
Cortec & Database corrected to show IRIG-B (De-Modulated) option as cortec code "C" (was "9" in error) and changing effecti
BOM, Cortec, Database & Date Drivers changed to include IEC 61850 protocol with 100Mbit/s Ethernet comms. and IRIG-B (M
Modulated) options with notional effective date of 24/07/06 for testing
BOM amended. Cortec & Date Drivers text changed for what was just "Chinese HMI"
"34…J" Software and Chinese HMI added in line with G Evans' e-mail dated 15/03/06, with a guestimated DC date of 21/03/06
amendment
"32…J" Software released with a DC date of 26/10/05 nb: ethernet options are not available with this issue - CDN R5760
Power Supply ZN0021*** changed retrospectively to ZN0001*** for 'B' design suffix versions
Hardware options 3 & 4 read "Fibre Optic Converter Only" & "IRIG-B and Fibre Optic Converter"
Configurator amended to allow choice of design suffix and software first to drive the subsequent options
"30…J" Software/Hardware released with DC date of 07/01/05
Livery Option added
Dates amended on Lookup to pick up correct final assembly according to design suffix
Lookup dates corrected for Input Module so that one day only entry for 21G, so that it correctly picks up the phase 2 module -
"21…G" Software/Hardware released as per CDN R3500/193, this is released as One Day Only as "15…C" is latest unless cu
requests "21G"
"21…G" Software/Hardware added with estimated release date of 07/05/04
Phantom Final Assembly corrected for Suffix "G" by adding date driver to Lookup2 - 15/03/04
Rules modified for Ethernet Licences ZB9800801 & ZB9800802
"17…C" Software/Hardware released for 1 DAY ONLY for CRUICKSHANKS order on authority of G Evans e-mail
"20…G" Software/Hardware release date with "…/Russian" language option was 16/02/04, now 01/06/04 - 18/2/04
"20…G" Software/Hardware release date with "…/Russian" language option was 19/01/04, now 16/02/04
"20…G" Software/Hardware release date with "…/Russian" language option was 01/04/04, now 19/01/04
Design suffix was "C" for all. Now "C" only for "Rear Comms" variants & "B" for the rest
UCA2/Ethernet not available as yet, release date delayed indefinitely
P141 Cortec created from P14x, now includes UCA2 / Ethernet from 01/03/2003
Rear comms available from 18/11/02
Qty ZB4018110 was 2 less for P14***7******** variants
Incorporate P144
Slot 05 pcb for P142***C******B variants was ZN0017001 in error
Hardware option 4 specified Protocol option 4 in error
Original
 BOM

Requirements Key(s) / # of digit in model Requirements Attribute Qty.

Keys Keys NUMBER DESCRIPTION Qty. Ref Ref
number Required
P14131RN6M0B58L 5 6 7 8 9 10 11 15
1 M L 1ML 1ML GN0010073 ANALOGUE INPUT MODULE 1 23 23 1
1 M 0 L 1M0L 1M0L 2072033A01 F/ASSY USER INTERFACE 40TE (PHASE 2) 1 22 22 1
1 M L 1ML 1ML GN0249001 COMMON PARTS 1 1
1 R 1R 1R ZB4018110 Self tapping screw pan head size 4 X ¼" 10 60 60 10
6 6 6 ZB9800801 License for VxWorks 1 55 55 1
6 6 6 ZB9800802 Sisco License for MMS-Ease Lite 1 56 56 1
N M NM NM 2071962A01 Relay Output PCB 1 2 2 1
3 M L 3ML 3ML 2071964A03 PSU 110/250V 1 1 1 1
R R R 2072071A01 3RJ45 Ports Redundant Ethernet Board 1 6 6 1

Page 9 of 11 563097730.xls 12/09/2021

 1 2 3 4 5 6 7 8 9 10 11 12 13 14

Cortec Landing cell : P141311A2M0B48L P 1 4 1 3 1 1 A 2 M 0 B 4 8

Configurator feedback : P14131RN6M0B58L P 1 4 1 3 1 R N 6 M 0 B 5 8

Cortec digit control 1 P

Cortec digit control 2 1
Cortec digit control 3 4
Cortec digit control 4 1
Vx Aux Rating 3 3
In/Vn Rating 1 1
Hardware Options 8 R
Product Specific Options 2 N
Protocol/Communications 1 6
Mounting Option M
Language 1 0
Software 1 B 5
Customisation 1 8
Design Suffix 1
15

L
L double digit in same row

5
6
7
8
9
10
11
12
13
14 1
15
16
17
L 18
0
0
0
0
0
0
0
0
0
0
0
0