Parker O-Ring Guide

O-Ring
Guide
Content
4 Parker´s safety program
6 Introduction
11 O-Ring material offering

14 Parker O-Ring compound numbering systems
15 Compound tables
15 Polyacrylate (ACM)
15 Polychloroprene Rubber (CR)
15 Ethylene Propylene Rubber (EPDM)
16 Nitril-Butadien (NBR)
17 Hydrogenated NBR (HNBR)
17 Silicone Rubber (VMQ)
17 Liquid Silicone Rubber (LSR)
18 Fluorosilicone (FVMQ)
18 Fluorocarbon (FKM)
19 High Performance Fluoroelastomers (HiFluor®)
20 Perfluoroelastomer (Parofluor®)
20 Parofluor Quantum®
21 Range of application
26 Specifications
29 Deformation force
35 Extrusion
37 Gland designs
38 Static seal – axial
40 Static seal – radial
42 Static seal – dovetail groove
42 Static seal – half dovetail gland
44 Dynamic seal – hydraulic
47 Sizing charts
48 2-xxx-sizes
53 3-xxx-sizes
54 5-xxx-sizes
55 6-xxx-sizes
69 O-Ring-sizes acc. to cross section d
85 Parbak® Back-up ring 8-xxx sizes
89 Parbak® Back-up ring other dimensions
O-Ring Guide
Parker Hannifin
3 O-Ring Division Europe
Parker´s safety program
Warning – user responsibility

This document and other information from Parker Hannifin Corporation, its
subsidiaries and authorized distributors provide product or system options for
further investigation by users having technical expertise.
The user, through its own analysis and testing, is solely responsible for mak-
ing the final selection of the system and components and assuring that all
performance, endurance, maintenance, safety and warning requirements of
the application are met. The user must analyze all aspects of the application,
follow applicable industry standards, and follow the information concerning
the product in the current product catalogue and in any materials provided
from Parker or its subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide
component or system options based upon data or specifications provided by
the user, the user is responsible for determining that such data and specifica-
tions are suitable and sufficient for all applications and responsibly foresee-
able uses of the components or systems.
Range of application
Our seals may only be used within the application parameters stated in our
documents as regards compatibility with contact media, pressures, tempera-
tures and time of storage. Application or use outside of the specified applica-
tion parameters as well as the selection of different compounds by mistake
may result in damage to life, the environment and/or equipment and facilities.
The information contained in our publications is based on know-how devel-
oped over decades of experience in the manufacturing and application of
seals. Despite this experience, unknown factors arising out of the practical
application of seals may considerably affect the overall applicability of this
information in such a way that the recommendations provided herein are not
to be considered generally binding.
The data for operating pressure, operating temperature, and surface speed
stated in the columns represent maximum values and are interrelated. Under
extreme working conditions it is recommended not to use all maximum values
simultaneously.
For special requirements (pressure, temperature, speed, etc.) please contact
our consultancy service, so that suitable materials and/or designs can be rec-
ommended.
Compatibility of seals and operating media / cleaning agents

Due to the great diversity of operational parameters affecting fluidic devices
and their impact on seals, it is absolutely imperative that manufacturers of
these devices approve seals for functional and operational suitability under
field conditions.
Furthermore, in view of the consistent increase of newly available media used
as hydraulic oils, lubricants, and cleaning agents, special attention is invited to
the aspect of compatibility with sealing elastomers currently in use.
Additives contained in base media in order to enhance certain functional char-
acteristics may affect compatibility characteristics of sealing materials.
For this reason, it is imperative that any product equipped with our seals be
O-Ring Guide
Parker Hannifin
Parker´s safety program
tested for compatibility with operational media or cleaning agents approved

or specified by you either at your plant or by means of field tests prior to any
serial application.
We kindly ask you to comply with this notice since, as a manufacturer of seals,
we are not in a position, as a matter of principle, to perform simulations re-
garding any and all conditions present in the final application nor of knowing
the composition of the operational media and cleaning agents used.
Design modifications
We reserve the right to make design modifications without prior notification.
Prototypes and samples

Prototypes and samples are produced from experimental moulds. The sub-
sequent series production may differ in production techniques from the pro-
totype production unless specific agreement to the contrary was reached
beforehand.
Delivery and services

The delivery guarantee (availability of moulds) for individual dimensions of our
range of products is limited to a period of 7 years.
Damaged moulds, including standard items, can only be replaced in case of
sufficient demand. Most of the dimensions stated in this catalogue are nor-
mally (but not as a matter of course) available ex stock.
For the production of smaller quantities, special compounds, and in case of
special production procedures, we reserve the right of charging a prorated
share of set-up costs.
All deliveries and services are subject to our terms.
Quality systems
Our manufacturing sites are certified according to ISO 9001 resp. ISO/
TS 16949.
Copyright
All rights reserved by Parker Hannifin Corporation. Extracts may only be taken
with permission. Modification rights reserved.
Validity
This edition supersedes all prior documents.
O-Ring Guide
Parker Hannifin
Introduction
Sealing technology by Parker-Prädifa

The Seal Group of the Parker Hannifin Corporation is a worldwide leader in the
development, production and sale of sealing systems, vibration dampers, EMI
shielding systems and thermally conductive materials.
Quality assurance
In the O-Ring Division’s world-class facilities, skilled Parker technicians man-
ufacture O-Rings to exacting standards. From in-house mixing and tooling
operations to the final non-contact inspection process, state-of-the art tech-
nology is employed to provide unparalleled material consistency and dimen-
sional control. Quality registrations are maintained to ensure superior product
performance and process repeatability.
Research and development

Based on decades of experience in a wide range of markets Parker develops
tailored sealing solutions for virtually any application. Parker’s sealing experts
can draw on an extensive network of R+D laboratories around the globe.
State-of-the-art materials, high-end manufacturing technology and designs
that are perfectly tailored to the specific application result in products and
solutions that have one aim in mind: the full satisfaction of our customers
and partners.
Computer simulation
Parker-Prädifa uses the Finite Elements Method to develop and optimise seal-
ing systems. Particularly elastomer materials with their non-linear properties
cannot be described strictly by using standard soft-
ware. Therefore, Parker-Prädifa has developed
proprietary mathematical models to describe
the complex material properties and special
measuring methods to capture the relevant
material parameters.
Computer simulation allows experts to detect
weak areas as early as in the concept phase and
to optimise materials or geometries. This saves development time and costs.
O-Ring Guide
Parker Hannifin
Introduction
Introduction
Literature
The Parker O-Ring Handbook has been a standard
reference work used by seal designers for decades.
It contains comprehensive information about the
properties of the most important sealing elastomers,
typical O-Ring application examples, examples of
statically acting seal designs plus descriptions of
conditions that may lead to O-Ring failure. In addi-
tion, the handbook contains an overview of interna-
O-Ring Handbuch
tional dimensions and standards as well as media O-Ring Handbook
compatibility data for fluids, gases and solids.
Materials
Tailored materials require tailored compounding processes. Therefore, Parker
produces its rubber mixtures and polymerises its thermoplastic materials
in-house. The portfolio of materials
developed and produced by Parker
ranges from compounds for extremely
low temperatures down to -60 °C (sili-
cones) to very high temperatures up to
+320 °C (Parofluor). Parker offers the
appropriate compound for the specific
application requirements including ex-
cellent resistance against aggressive
chemicals. With excellent extrusion
and abrasion resistance Parker’s pro-
prietary polyurethane line is suitable for an extremely extensive application
range and continually new uses.
Product lines
Parker manufactures O-Rings and spe-
cial moulded parts for automotive engi-
neering, the chemical and bio-chemical
industries, fluid power, refrigeration
and air conditioning technology, the
petroleum sector, aerospace, the semi-
conductor industry and many other in-
dustrial sectors.
O-Ring Guide
Parker Hannifin
Introduction
O-Rings
O-rings are manufactured according to metric and imperial international
standards such as AS 568B, DIN ISO 3601 and JIS. Custom sizes of almost
any dimension are possible such as miniature O-rings, special O-rings with
large dimensions, as continuously moulded and spliced cord.
O-Ring kits
The handy carrying case with O-Rings is ideally suited for
repairs, assembly jobs and workshops, and finally puts an
end to the search for the right O-Ring.
Parker offers it in various versions: with O-Rings in
selected imperial and metric standard dimensions
and appropriate materials or with customised con-
tent. Compact, well arranged and always within
reach, the kit provides the appropriate materials for quick
use.
Accessories
Products to assist O-Ring users include
assembly greases and lubricants, sizing
cones and extraction tools.
Parbak® Back-up rings
Parbak® Back-up rings prevent extrusion in high-pressure applications, help

to maintain the lubricant film and thus prolong the service life of O-Rings.
The Parbak® numbers correspond to the size designations of the 2-xxx series
of the Parker O-Rings they are installed with (e.g. 8-211, N 300-90 fits O-Ring
2-211, N 674-70).
O-Ring Guide
Parker Hannifin
Introduction
Introduction
ParCoat® Coating
O-Rings with ParCoat® coatings can be assembled with low exertion of force
using automatic equipment. The rings will not stick together during the feeder
process. Prior to installation they can be elongated by over 150 % without
causing the anti-friction coating to burst or crack.
Benefits
• Clearly reduced frictional forces
• No damage to seals during installation or assembly
• Faster, more cost-efficient assembly process
• Reduction of gaspermeability
• Seals will not stick together in automatic feeding processes
• No soiling or contamination
• Translucent ParCoat® treated O-Rings insures no risk of mix-ups as basic
elastomer compound colour remains visible
• Elongation capacity above 150 %, depending on type
• Suitable for nearly all standard elastomer types (for LSR not all coatings
applicable)
• In different colours available
O-Ring Guide
Parker Hannifin
O-Ring Guide
Parker Hannifin
O-Ring material offering
Parker O-Ring compounds are formulated to meet the most stringent industry
standards, including FDA, USP, KTW, DVGW, BAM, WRAS (WRC), NSF, Un-
derwriters Laboratories (UL), Aerospace (AMS) and many customer-specific
requirements.
O-Ring Guide
Parker Hannifin
Compounds
O-Rings can be molded in a wide range of compounds in hardnesses from
40 to 90 Shore A. These materials include:
• Polyacrylate (ACM)
ACM (acrylic rubber) has good resistance to mineral oil, oxygen and ozone.
The water compatibility and cold flexibility of ACM are considerably worse
than those with NBR.
• Polychloroprene Rubber (CR)

Also known by the tradename Neoprene, polychloroprene was the first syn-
thetic rubber and exhibits generally good ozone, aging, and chemical resist-
ance. It has good mechanical properties over a wide temperature range.
• Nitrile-Butadiene (NBR)
Nitrile rubber (NBR) is the general term for acrylonitrile-butadiene terpoly-
mer. The acrylonitrile content of nitrile sealing compounds varies consid-
erably (18 to 50 %). Polymers with higher ACN content exhibit less swell
in gasoline and aromatic solvents, while lower ACN polymers exhibit bet-
ter compression set and low temperature flexibility. Polymer is also called
Buna-N.
• Hydrogenated NBR (HNBR)

Hydrogenated NBR was developed as an air-resistant variant of nitrile rub-
ber. In HNBR, the carbon-carbon double bonds in the main polymer chain
are saturated with hydrogen atoms in a process called “hydrogenation” that
improves the material’s thermal stability and oxidation resistance.
• Ethylene Propylene Rubber (EPDM)

EPDM is a terpolymer of ethylene, propylene, and a diene third monomer
used for cross-linking.
• Silicone Rubber (VMQ)

Silicone elastomers have relatively low tensile strength, poor tear and wear
resistance. Silicones also possess good insulating properties and tend to be
physiologically neutral.
• Fluorosilicone (FVMQ)
Fluorosilicone is a silicone polymer chain with fluorinated side-chains for
improved oil and fuel resistance. The mechanical and physical properties are
very similar to those ofsilicone.
• Liquid Silicone Rubber (LSR)

Liquid Silicone Rubber (LSR) offer great advantage producing efficient high
quantity silicone parts. Flash less production gives opportunities for difficult
molded shapes. I.E. for fastidious medical or automotive applications.
O-Ring Guide
Parker Hannifin
• Fluorcarbon (FKM)
Fluorocarbon (FKM) has excellent resistance to high temperatures and a
broad range of chemicals. Permeability and compression set are excellent.
• HiFluor® (FKM)
As a high-performance fluoroelastomer, Hifluor® offers chemical stability
comparable to perfluoroelastomers (FFKM) in nearly all media.
Particularly in polar solvents, Hifluor® exhibits major advantages over con-

ventional FKM polymers.
HiFluor® offers a wide range of application solutions in all industrial sec-
tors. From conventional O-rings in standard (imperial and metric) dimen-
sions through to diaphragms and moulded engineering parts according to
customers’ drawings, the compound can be processed in rubber-metal
composites as well.
• Parofluor® (FFKM)
The Parofluor® range consists of advanced perfluorinated elastomers
(FFKMs) exclusively developed and produced by Parker Hannifin. They
are carried under the trade names of Parofluor® and Parofluor Quantum®.
Compared with other perfluorinated elastomers Parofluor® compounds offer
outstanding retained resiliency as they have been developed specifically for
extremely challenging sealing applications.
O-Ring Guide
Parker Hannifin
Parker O-Ring compound numbering systems

Note: There are two types of nomenclature used to reference Parker O-Ring
products. See tables below for description of these types.
Type I:
N 0674 -70
Hardness (Shore A)
Sequence Number
Polymer-Code
A Polyacrylate
C Neoprene (Chloroprene)
E Ethylene Propylene
L Fluorosilicone
N Nitrile (Buna N) and HNBR
S Silicone
V Fluorocarbon, HiFluor®, Parofluor™
O-Ring Guide
Parker Hannifin
Compound tables
Compound Hard- Colour Temp. Properties / applications
code ness range (°C)
(Shore static
A)
Polyacrylate (ACM)
A3872-70 -70±5 black -20 +150 Euro standard compound
A8531-80 -80±5 black -20 +150 Euro standard compound
material offering
Dichtungswerkstoffe
Polychloroprene Rubber (CR)
Standard; good aging and salt water resist-
C0557-70 -70±5 black -40 +100 ance; often used in refrigerant (e.g. R 134a
or R22)
C0944-70 -70±5 red -40 +100 Col-O-Ring compound
O-Ring
C3721-70 -70±5 black -35 +100 Euro standard compound
Ethylene Propylene Rubber (EPDM)

E0529-60 60±5 black -50 +150 Standard
Global standard compound; good compres-
sion set; steam to 200 °C, hot water, air to
E0540-801) 80±5 black -50 +150 150 °C, diluted acids; fire-resistant hydraulic
fluids with phosphateester base; brake fluids
with non-mineral oil base
Global standard compound; EN 681-1
E3609-70 70±5 black -50 +150
approval
E3678-80 80 ±5
violet -50 +150 Col-O-Ring compound
For industrial cooling water applications; Euro
E3704-70 70±5 black -50 +150
standard compound
E3804-90 90±5 black -50 +150 Standard; Parbak® compound
E3809-80 80±5 black -50 +150 Euro standard compound
For industrial cooling water applications;
E8556-70 70±5 black -50 +150
improved aging resistance
E8743-70 70 ±5
black -50 +150 FDA-compound, for food application
1)
bold printed compounds are 2-xxx standard and available ex-stock.
The temperature ranges given are only valid where elastomer medium compatibility is absolute.
Recommendations in the column remarks / applications on application design and material selec-
tion are based on available technical data and are offered as suggestions only. Each user should
make his own tests to determine the suitability for his own particular use. Parker offers no express
or implied warranties concerning the form, fit, or function of a product in any application.
O-Ring Guide
Parker Hannifin

(Shore static
A)
Ethylene Propylene Rubber (EPDM)
Standard for drinking water application with
E8780-80 80±5 black -50 +150 KTW, W 270, EN 681-1, W 534, Ö-Norm,
B-5014-1 approval
Standard for drinking water application with
E8790-70 70±5 black -50 +150 KTW, WRAS, W 270, EN 681-1, W 534, KIWA,
NSF 61, Ö-Norm, B-5014-1 approval
Nitril-Butadien (NBR)
N0525-60 60±5 black -35 100 Standard
N0552-90 1)
90±5 black -30 100 Standard
Global standard compound; generally
suited for hydraulic and pneumatic systems;
compatible with hydraulic oil, water/glycol
N0674-701) 70±5 black -35 100
(HFC fluids) and oil in water emulsions (HFA);
animal, mineral and vegetable oils, fuels,
heavy oil
N3505-50 50±5 black -35 100 Improved ozone and weather-proof resistance
Low temperature NBR with improved
N3575-75 75±5
black -50 100
oilresistance
N3578-80 80±5 black -40 100 Standard
N3593-70 70±5 black -30 100 Euro standard compound
Improved ozone resistance; Euro standard
N8676-70 70±5
black -35 100
compound
1)
O-Ring Guide
Parker Hannifin

(Shore static
A)
Hydrogenated NBR (HNBR)
N3510-85 85±5 black -35 +150 Standard
N3512-90 90±5 black -35 +150 Standard
light-
N3554-75 75 ±5
-35 +150 Standard
green

N3573-75 75±5 black -35 +150 Standard
N3723-80 80±5 black -35 +150 Euro standard compound
N3813-70 70±5 black -40 +150 Low temperature
N3831-70 70±5 black -35 +150 Euro standard compound
N3837-85 85±5 green -35 +150 Standard
Suitable for Biodiesel (RME) applications up
N8505-70 70±5 green -35 +150
to +80°C
N8570-60 60 ±5
black -35 +150 Euro standard compound
N8680-90 90±5 black -40 +150 Low temperature HNBR
Compound for gas- and water application
N8888-70 70±5 yellow -35 +150
with EN 549, EN 681-1 approval
Silicone Rubber (VMQ)

S0595-50 50±5 red -55 +200 Standard
Global standard compound; Col-O-Ring
S0604-70 70±5 red -55 +200 compound; hot air (to 210°C), oxygen, water
(to 100°C); only suitable as static seal
S0613-60 60±5 red -55 +200 Standard
S0614-80 80±5 red -55 +200 Global standard compound
Liquid Silicone Rubber (LSR)

reddish
S3693-50 50±5 -50 +200 Standard
brown
reddish
S3695-60 60±5 -50 +200 Standard
brown
reddish
S3697-40 40±5 -50 +200 Standard
brown
reddish
S3698-70 70±5 -50 +200 Standard
brown
1)
O-Ring Guide
Parker Hannifin

(Shore static
A)
Fluorosilicone (FVMQ)
Col-O-Ring compound; for high temperature,
good low temperature recistance; mostly fit-
L0677-70 70±5 blue -60 +170
ted where fuel and oil resistance is important,
e.g. in aircraft
Approvals for military and aerospace
L0806-80 80±5 blue -60 +170
applications
L3355-70 70 ±5
yellow -60 +170
L8559-70 70±5 blue -60 +170 Standard
Standard; approvals for aerospace applica-
L8585-80 80±5 blue -60 +170
tions
Fluorocarbon (FKM)
V0709-90 90±5 black -25 +200 Standard
Global standard compound; for high tempera-
tures; hot oil; many chemicals; fireresistant fluids
V0747-751) 75±5 black -25 +200
with Phosphate-Ester and Chlorinatedhydrocar-
bon base; Copolymer
V0763-60 60±5 brown -25 +200
V0884-75 75±5 brown -25 +200 Col-O-Ring compound; Copolymer
Col-O-Ring compound; medium compatibility
V0894-90 90±5 brown -25 +200
like V0747-75
V3642-75 75 ±5
black -25 +200 Terpolymer
V3670-70 70±5 black -25 +200
V3681-80 80±5 green -25 +200
V3701-70 70±5 green -25 +200 Euro standard compound
Terpolymer; improved low temperature
V3736-75 75 ±5
black -28 +200
resistance
V3738-75 75 ±5
black -20 +200 Improved medium compatibility
V8521-75 75±5 red -25 +200 Euro standard compound
V8592-75 75±5 blue -40 +200 Low temperature FKM
Low temperature FKM with improved chemi-
V8688-75 75 ±5
black -35 +200
cal resistance
1)
The temperature ranges given are only valid where elastomer medium compatibility is absolute. Re-
commendations in the column remarks / applications on application design and material selection
are based on available technical data and are offered as suggestions only. Each user should make
his own tests to determine the suitability for his own particular use. Parker offers no express or
implied warranties concerning the form, fit, or function of a product in any application.
O-Ring Guide
Parker Hannifin

(Shore static
A)
Fluorocarbon (FKM)
Improved low temperature resistance; suit-
V8703-75 75±5 black -30 +200
able for Biodiesel (RME) applications
Improved resistance against water/glycol
V8722-75 75±5 black -25 +200
and acids

V8750-70 70±5 black -25 +200 FDA-compound, food application
High Performance Fluoroelastomers (HiFluor®)

Extremely low compression set at cyclical
V3819-75 75±5 black -25 +250 temperatures; excellent availability in Parker
standard dimensions
Improved resistance to explosive decom-
V8534-90 90±5 black -25 +250 pression and gap extrusion; off-shore and
petrochemical applications
Food industry applications; meets FDA CFR21
NR. 177.2600 requirements; particularly
V8730-70 70±5 white -25 +250
suitable for use with high processing tem-
peratures and aggressive media
Preferably used for moulded functional com-
V3852-65 65±5 black -25 +250
ponents and membranes/diaphragms
V8558-75 75±5 green -25 +260 For high temperatures
1)
The temperature ranges given are only valid where elastomer medium compatibility is absolute. Re-
commendations in the column remarks / applications on application design and material selection
are based on available technical data and are offered as suggestions only. Each user should make
his own tests to determine the suitability for his own particular use. Parker offers no express or
implied warranties concerning the form, fit, or function of a product in any application.
O-Ring Guide
Parker Hannifin

(Shore static
A)
Perfluor-Elastomer (Parofluor®)
Standard; good resistance in hot water; for
V8920-75 75±5 black -15 +260
wet processes in semiconductor applications
Global standard; best compound for hot water
V8545-75 75±5 black -15 +300
and steam applications
Global standard; for high temperature-
V8562-75 75±5 white -15 +300 plasma-applications; dry applications in
semiconductor industries
Pure compound for sterile and pharmaceuti-
V8921-75 75±5 white -15 +300
cal technology, for oxidising media
V8588-90 90 ±5
black -15 +260 ED-resistant, Norsok M-710
Parofluor®; for low temperatures; for
V3734-70 70±5 black -15 +320
aerospace
For high temperatures; not recommended for
V8930-75 75±5 black -15 +325
hot aliphatic amine and water steam
For high temperatures; for hot aliphatic amine
V8931-75 75±5 black -15 +310
and water steam
FDA, for food industry; pharmacy and
V8950-75 75±5 black -15 +240
biotechnology
FDA, USP Class VI for pharamacy, biotechnol-
V8951-75 75±5 white -15 +240
ogy und medical technology
Parofluor Quantum®
V8910-75 75±5 black -20 +220 Improved chemical resistance
V8911-75 75±5 white -20 +220 Improved chemical resistance
V8787-75 75±5 black -20 +230 Optimized paint, varnish and solvent stability
V8844-75 75±5 white -20 +230 Optimized paint, varnish and solvent stability
1)
O-Ring Guide
Parker Hannifin
Range of application
Underwriters laboratories approved services
Gasoline/alcohol blends
Anhydrous ammonia
Naptha or kerosene
MFG or natural gas
Diesel fuel, fuel oil,

Fire extinguishing
Heated fuel oil

lubricating oil
MPS gas
Gasoline
LP-gas
agents

Compound
A B C D E F G H I J
code
N0674-70       
V0747-75      
V0884-75    
Compounds for gas supply and appliances

The following Parker Hannifin compounds are approved by the German
Association for Gas and Water (DVGW) for the applications listed:
Parker Polymer Colour Standard
compound
V0747-75 FKM black DIN 3535, Part
N0552-90 NBR black DIN EN 549
N0674-70 NBR black DIN EN 549, VP 406
N8888-70 HNBR yellow DIN EN 549, VP 406, VP 614
S3698-70 VMQ red DIN EN 549
V0747-75 FKM black DIN EN 549
V0884-75 FKM brown DIN EN 549
O-Ring Guide
Parker Hannifin
Compounds for food industry

Compounds which are to be used in contact with foodstuffs must comply
with the law. The German Federal Institute for Risk Assessment (BfR) has
defined the type of substances which are not harmful to health and the
permissible migration or leaching.
According to BfR recommendation no. XXI, rubber parts are devided into
4 classes and a special category according to the period of time in contact
with the foodstuff.
Silicone is suitable for these applications because of its physiological proper-
ties. It is inert, taste and odourfree.
The FDA (Food and Drug Administration, USA) has a list of allowable sub-
stance similar to the BfR list which are non-toxic or carcinogenic. Additionally
the FDA requires extraction tests which are carried out by the manufacturer.
Parker compound Polymer Colour Standard

EJ590-70 EPDM white FDA + USP, classVI
EJ595-70 EPDM white FDA + USP, classVI
E3609-70 EPDM black FDA
E8743-70 EPDM black FDA
E8790-70 EPDM black FDA + BfR
E8780-80 EPDM black FDA + BfR
S3697-40 LSR reddish brown FDA + BfR
V8750-70 FKM black FDA
V8722-75 FKM black FDA
V8730-70 HiFluor® white FDA
V8950-75 FFKM black FDA
V8951-75 FFKM white FDA + USP classVI
O-Ring Guide
Parker Hannifin
KTW approved compounds

Sealing compounds for use in drinking water and heating applications are
subject to a large number of approval regulations designed to ensure their
harmlessness from the stage of water extraction, treatment and transport
through to the consumer’s tap. Worldwide, almost all countries have issued
their own drinking water regulations including specific tests and lists of ap-
proved ingredients. The regulations are complemented by physical and mi-
crobiological examinations.

KTW:
KTW is the nationally recognized standard for all devices, components and
materials which contact drinking water. In addition to Germany (KTW), Great
Britain (WRAS), the USA (NSF61), France (ACS) and the Netherlands (KIWA)
have published their own regulations for these applications.
Parker’s O-Ring Division has developed several materials that are certified
to KTW.
Parker Polymer Water- Colour Standard

Compound contact-
temperature
E1549-70 EPDM 90°C black KTW
85°C WRAS
82°C NSF 61
E8780-80 EPDM 90°C black KTW, W270, Ö-Norm B5014-1
- EN 681-1, W 534
E8790-70 EPDM 90°C black KTW, W270
85°C WRAS
90°C KIWA, Ö-Norm B5014-1
82°C NSF 61
- EN 681-1, W 534
N8888-70 HNBR - yellow EN 681-1, EN 549
O-Ring Guide
Parker Hannifin
Aerospace materials
The aerospace industry demands the most from elastomeric compounds.
Special materials often must be developed to meet specification requirements.
Additionally many special requirements must be met during the production of
finished parts, not least to meet safety, technical and quality requirements.
AMS1) and NAS2) rubber specification descriptions
Rubber Parker Hardness Description title

specifications compound (Shore A)
AMS3201 N0545-40 35-45 Dry heat resistance
AMS3205 N0299-50 45-55 Low temperature resistance
AMS3208 C0267-50 45-55 Weather resistant; chloroprene type
AMS3209 C1124-70 65-75 Weather resistant; chloroprene type
AMS3212 N0525-60 55-65 Aromatic fuel resistant
AMS3220 N0525-60 55-65 General purpose; fluid resistant
AMS3238 B0318-70 65-75 Phosphate-ester resistant; butyl type
AMS3301 S0469-40 35-45 Silicone; general purpose

S1224-70
AMS3304 65-75 Silicone; general purpose
S0604-70
L1223-60
AMS3325 55-65 Fluorosilicone rubber; fuel and oil resistant
LM152-60
AMS3337 S0383-70 65-75 Silicone; extreme low temperature resistant
AMS3345 S0899-50 45-55 Silicone rubber
S1224-70 Silicone rubber; lubricating oil; compression
AMS3357 65-75
S0604-70 set resistant
V8545-75 Sealing rings; perfluorocarbon; high tem-
AMS7257 70-80
FF200-75 perature resistant
High temp.; fluid resistant; very low com-
AMS7259 V0709-90 85-95
pression set FKM
Silicone; heat resistant; low
AMS7267 S0355-75 70-80
compression set
AMS7271 N0506-65 60-70 Fuel and low temperature resistant
1)
Aerospace Material Specification issued by the Society of Automotive Engineers, Inc.
2)
National Aerospace Standard issued by Aerospace Industries Association of America, Inc.
O-Ring Guide
Parker Hannifin
Rubber Parker Hardness Description title

specifications compound (Shore A)
AMS7272 N0287-70 65-75 Synthetic lubricant resistant
V1164-75
High temperature fluid resistant; very low
AMS7276 V1226-75 70-80
compression set FKM
V0747-75
NAS1613 E1267-80 75-85 Packing; O-Ring; phosphate ester resistant
AMS-P-5315 N0602-70 65-75 Packing; O-Ring; hydrocarbon fuel resistant

AMS-P-5510 N0507-90 85-95 Gasket; straight thread tube fitting boss
N0406-60 Synthetic rubber sheets; strips; molded or
AMS-R-6855 55-75
C1124-70 extruded shapes; synthetic oil resistant
Rubber; sheet; molded and extruded
AMS-R-7362 47-071 65-75
shapes; synthetic oil resistant
Packing; preformed; petroleum hydraulic
AMS-P-25732 N0304-75 70-80
fluid resistant; limited performance
L1223-60
L1120-70
L1218-80
L1077-75 Rubber; fluorosilicone elastomer; oil and
AMS-R-25988 55-85
LM152-60 fuel resistant
LM153-70
LM154-75
LM155-80
V1164-75
V1226-75 Rubber; fluorocarbon elastomer; high tem-
AMS-R-83248 70-95
V0747-75 perature fluid and compression set resistant
V0709-90
Packing; preformed; petroleum hydraulic
AMS-P-83461 N0756-75 70-80
fluid resistant; improved performance
Rubber; fluorocarbon elastomer; improved
AMS-R-83485 V0835-75 70-80
performance at low temperatures
1)
Aerospace Material Specification issued by the Society of Automotive Engineers, Inc.
2)
National Aerospace Standard issued by Aerospace Industries Association of America, Inc.
O-Ring Guide
Parker Hannifin
Specifications
Airbus Nord-Sud Aviation (NSA)
Specification Parker compound Description
NSA 5512 Special Bonded seal
NSA 8200 L8585-80 Sizes 3-xxx
NSA 8201 E1267-80 Sizes 3-xxx
NSA 8202 C3645-80 Sizes 3-xxx
NSA 8203 L8585-80 Sizes 2-xxx
NSA 8204 E1267-80 Sizes 2-xxx; NAS 1613; color code
NSA 8205 C3645-80 Sizes 2-xxx
NSA 8206 S0604-70 Sizes 2-xxx
NSA 8207 S0604-70 Sizes 3-xxx
NSA 8213 E1267-80 Square ring
NSA 8671 W5036 Square ring; PTFE
Norme Française (NF), (french standard)

Specification Parker compound Category
NF L17-120 N0674-70 20A7
NF L17-241 E1267-80 41B8
NF L17-160 V3642-75 60C7
NF L17-160 V0709-90 60C9
NF L17-164 V0747-75 64C8
NF L17-161 L3747-60 61D6
NF L17-261 L8585-80 61D8
NF L17-261 L1218-80 61D8
NF L17-250-4 S0604-70 EN 2261
O-Ring Guide
Parker Hannifin
Compound-Datasheet (WL)
Specification Parker compound
5.5440 C0365-45
5.5502 S0595-50
5.5600 E0529-65
5.5601 N0406-60
5.5602 N0239-60
5.5603 S0613-60

5.5612 N0406-60
5.5627 N0261-65
5.5629 N0525-60
5.5655 N0406-60
5.5688 L3747-60
5.5701 V0747-75
5.5702 N0674-70
5.5703 S0604-70
5.5704 V3670-70
5.5707 B3688-70
5.5709 C0557-70
5.5710 L0677-70/L8559-70
5.5801 N3578-80
5.5802 E0540-80
5.5804 V0747-75
5.5808 V0709-90
5.5810 N0552-90
5.5813 L0806-80
5.5814 S0614-80
5.5829 N0755-80
5.5855 N3518-80
O-Ring Guide
Parker Hannifin
O-Ring Guide
Parker Hannifin
Deformation force
The following charts are included to facilitate engineering analysis. Ad-

ditional information is available in the Parker O-Ring Handbook.
Deformation force
The force necessary to deform an O-Ring cross-section by a given amount (in
percent) is related to the compound modulus and O-Ring geometry. Normally
the user knows the compound hardness and the deformation in percent, the
following diagrams show the relationship between hardness, deformation and
cross-section. The range of loads given in the diagrams refers to all elasto-
mers.
The forces required to deform elastomers during assembly can be estimated
from the diagrams and the force imparted to the metal, aluminium or plastic
gland faces also can be obtained.
Deformation force
O-Ring Guide
Parker Hannifin
1)
Hardness d2 = 1.80 mm
(Shore A)
90
80
30 70
60
50
Compression load charts
90
Length in cm of O-Ring circumference

80
20 70
60
30
50
O-Ring deformation (%)

90
80
10 70
60
50
1 2 3 4 5 6 7 8 910 20 30 50 100 200 500 1000
O-Ring Guide
Parker Hannifin
1)
Force to derform cross section (N/cm)
O-Ring Division Europe

1)
(Shore A)
90
80
30 70
60
50
90

80
20 70
60
31
50

90
80
10 70
60
50
O-Ring Guide
Parker Hannifin
1 2 3 4 5 6 7 8 910 20 30 50 100 200 500 1000
1)
Force to derform cross section (N/cm)

Deformation force
1)
(Shore A)
90
80
30 70
60
50

90
80
20 70
60
32
50

90
80
10 70
60
50
O-Ring Guide
Parker Hannifin
1 2 3 4 5 6 7 8 910 20 30 50 100 200 500 1000

Force to derform cross section (N/cm)1)
1)
(Shore A)
90
80
30 70
60
50

90
80
20 70
60
33
50

90
80
10 70
60
50
O-Ring Guide
Parker Hannifin
1 2 3 4 5 6 7 8 910 20 30 50 100 200 500 1000

Deformation force
1)
(Shore A)
90
80
30 70
60
50

90
80
20 70
60
34
50

90
80
10 70
60
50
O-Ring Guide
Parker Hannifin
1 2 3 4 5 6 7 8 910 20 30 50 100 200 500 1000

Extrusion
600
Diagram for
400 selection of
O-ring hardness -
static seal
300
200
Working pressure (bar)
100 Extrusion
80
60
Deformation force
40
30 No
Extrusion
20
Hardness
(Shore A) 70 80 90
10
8
0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1,0
Total diameteral play (mm)1)
Basis for curves

• 100,000 pressure cycles at the rate of 60 per minute from zero to the indi-
cated pressure.
• Maximum temperature (i.e., test temperature) 70°C.
• No back-up rings.
• Total diametral clearance must include cylinder expansion due to pressure.
• Apply a reasonable safety factor in practical applications to allow for exces-
sively sharp edges and other imperfections and for higher temperatures.
1)
Reduce the clearance shown by 60% when using silicone or fluorosilicone elastomers.
O-Ring Guide
Parker Hannifin
O-Ring Guide
Parker Hannifin
Gland designs
The following charts are included to facilitate engineering analysis. Ad-

ditional information is available in the Parker O-Ring Handbook.
Parker offers O-Rings for use in static as well as dynamic sealing applications.
Static seals are those where the mating parts of the gland do not have move-
ment relative to each other. These seals include face, radial, dovetail. Exam-
ples of these seals and the corresponding design charts are found on the
following pages. Dynamic seals include reciprocating, floating pneumatic,
oscillating, and rotary applications. Dynamic seals are defined by one of the
gland parts having movement relative to the other part. Gland design recom-
mendations for a reciprocating seal are provided also in this chapter.
For further design assistance and recommendations contact a Parker O-Ring

applications engineer.
Gland designs
O-Ring Guide
Parker Hannifin
Gland designs
Static seal – axial

The O-Ring is deformed in the axial direction. Under pressure the O-Ring is
subjected to a relative movement, it is important to note the pressure direc-
tion.
• If pressure acts from inside, then the O-Rings outside diameter should be
in contact with the gland outside diameter (optimally compressed between
1 and 3 % of circumference).
h+ 0 . 1
B
A
r2
r1
0° to 5°
B b
Pressure from O d7 H 11
inside
• If pressure acts from outside, then the O-Rings inside diameter should be in
contact with the internal diameter of the gland (up to 6 % stretched).
h+ 0 . 1
B
Pressure from
A outside
0° to 5°
B b
r1 r2
O d8 H 11
O-Ring Guide
Parker Hannifin
Gland designs
Surface roughness – static seal

Surface Pressure Surface roughness in μm,
load area tp > 50 %
Ra Rmax.
A Contact area non-pulsating 1,6 6,3

A Contact area pulsating 0,8 6,3
B Gland diameter and sides non-pulsating 3,2 12,5
B Gland diameter and sides pulsating 1,6 6,3
d2
d1
Surface roughness in μm, load area1)

d2 h+0,1 b+0,2 r1 r2
1,50 1,10 1,9 0,2 - 0,4 0,2 - 0,4
1,80 1,30 2,4 0,2 - 0,4 0,2 - 0,4
2,00 1,50 2,6 0,2 - 0,4 0,2 - 0,4
2,50 2,00 3,2 0,2 - 0,4 0,2 - 0,4
2,65 2,10 3,6 0,2 - 0,4 0,2 - 0,4
3,00 2,30 3,9 0,4 - 0,8 0,2 - 0,4
3,55 2,80 4,8 0,4 - 0,8 0,2 - 0,4
4,00 3,25 5,2 0,4 - 0,8 0,2 - 0,4
Gland designs
5,00 4,00 6,5 0,4 - 0,8 0,2 - 0,4

5,30 4,35 7,2 0,4 - 0,8 0,2 - 0,4
6,00 5,00 7,8 0,4 - 0,8 0,2 - 0,4
7,00 5,75 9,6 0,8 - 1,2 0,2 - 0,4
8,00 6,80 10,4 0,8 - 1,2 0,2 - 0,4
9,00 7,70 11,7 0,8 - 1,2 0,2 - 0,4
10,00 8,70 13,0 0,8 - 1,2 0,2 - 0,4
12,00 10,60 15,6 0,8 - 1,2 0,2 - 0,4
1)
The ISO/DIN recommendations are preferred and are shown here in heavy print.
O-Ring Guide
Parker Hannifin
Gland designs
Static seal – radial
d2
d1
Gland dimensions – radial deformation

d2 t1) b+0,2 z r1 r2
1,50 1,10 1,9 1,5 0,2 - 0,4 0,1 - 0,3
1,80 1,40 2,4 1,5 0,2 - 0,4 0,1 - 0,3
2,00 1,50 2,6 1,5 0,2 - 0,4 0,1 - 0,3
2,50 2,00 3,2 1,5 0,2 - 0,4 0,1 - 0,3
2,65 2,20 3,6 1,5 0,2 - 0,4 0,1 - 0,3
3,00 2,30 3,9 2,0 0,4 - 0,8 0,1 - 0,3
3,55 2,90 4,8 2,0 0,4 - 0,8 0,1 - 0,3
4,00 3,25 5,2 2,0 0,4 - 0,8 0,1 - 0,3
5,00 4,10 6,5 3,0 0,4 - 0,8 0,1 - 0,3
5,30 4,50 7,2 3,0 0,4 - 0,8 0,1 - 0,3
6,00 5,00 7,8 3,0 0,4 - 0,8 0,1 - 0,3
7,00 5,90 9,6 3,6 0,8 - 1,2 0,1 - 0,3
8,00 6,80 10,4 4,0 0,8 - 1,2 0,1 - 0,3
9,00 7,70 11,7 4,5 0,8 - 1,2 0,1 - 0,3
10,00 8,70 13,0 4,5 0,8 - 1,2 0,1 - 0,3
12,00 10,60 15,6 4,5 0,8 - 1,2 0,1 - 0,3
Surface finish roughness – static seal

load area tp > 50 %
Ra Rmax.
C Surface finish of leading edge chamfer 3,2 12,5
The tolerances are taken from d3h9 + d4H8 or d5f7+d6H9.

1)
The ISO/DIN recommendations are preferred and are shown in heavy print.
O-Ring Guide
Parker Hannifin
Gland designs
r2 b + 0.2
rounded
r1 B and flash free
B A
O d 9 f7
O d3 h9 O d4 H 8
t
C
15° to 20°
0° to 5° Z
Piston seal
b+0.2
r1
r2 B
15° to 20°
A t
C
O d5 f7 O d10 H 8
Od6 H 9
Gland designs
rounded
and flash free
Z 0° to 5°
Rod seal
O-Ring Guide
Parker Hannifin
Gland designs
Static seal – dovetail groove

The dovetail groove form is used when it is necessary to hold an O-Ring in
position; e.g. during surface work, on opening and closing of tooling, where
otherwise the O-Ring would fall out of the gland.
The machining of the gland is difficult and expensive.
r2
h
B
r1
Od
d = d1 + d 2 24°
Dovetail gland
d = gland mean diameter
• The gland width is measured before edges are deburred

• The radius r2 is so selected that the O-Ring is not damaged on assembly
and so that the O-Ring can not be trapped in the gap under high pressure.
Static seal – half dovetail gland
O-Ring Guide
Parker Hannifin
Gland designs
Dovetail gland dimensions

d2 h b r1 r2
1,80 1,25+0.05 1,40+0.1 0,1 - 0,3 0,4 - 1,6
1,80 2,05+0.05 2,10+0.1 0,1 - 0,3 0,4 - 1,6
3,55 1,80+0.05 2,85+0.1 0,1 - 0,3 0,4 - 1,6
5,30 4,55+0.08 4,35+0.1 0,1 - 0,3 0,4 - 1,6
7,00 5,85+0.08 5,85+0.1 0,1 - 0,3 0,4 - 1,6
Surface roughness
load area tp > 50 %
Ra Rmax.

Half dovetail gland dimensions

d2 h b Nominal squeeze r1 r2
(%)
1,78 1,30 +0.05
1,60 +0.2
27 0,1 - 0,3 0,4 - 1,6
2,62 2,05+0.05 2,40+0.2 22 0,1 - 0,3 0,4 - 1,6
3,53 2,85+0.05 3,15+0.2 19 0,1 - 0,3 0,4 - 1,6
5,33 4,35+0.08 4,80+0.2 18 0,1 - 0,3 0,4 - 1,6
6,99 5,90+0.08 6,50+0.2 16 0,1 - 0,3 0,4 - 1,6
Gland designs
O-Ring Guide
Parker Hannifin
Gland designs
Dynamic seal – hydraulic
b+0.2
r1
r2 B
15° to 20°
A t
C
O d5 f7 O d10 H 7
Od6 H 9
rounded
and flash free
Z 0° to 5°
Rod seal – hydraulic
r2 b+0.2
rounded
r1 B and flash free
B A
O d9 f7
O d3 h9 O d4 H 8
t
C
15° to 20°
0° to 5° Z
Piston seal – hydraulic
O-Ring Guide
Parker Hannifin
Gland designs
Surface-finish roughness – hydraulic

Surface Surface roughness in μm,
load area tp > 50 %
Ra Rmax.
A Contact area 0,4 1,6

B Gland diameter and sides 1,6 6,3
C Surface finish of leading edge chamfer 3,2 12,5
Gland dimensions – hydraulic

d2 t1) b+0,2 z r1 r2
1,50 1,30 1,9 1,5 0,2 - 0,4 0,1 - 0,3
1,80 1,45 2,4 1,5 0,2 - 0,4 0,1 - 0,3
2,00 1,70 2,6 1,5 0,2 - 0,4 0,1 - 0,3
2,50 2,10 3,3 1,5 0,2 - 0,4 0,1 - 0,3
2,65 2,20 3,6 1,5 0,2 - 0,4 0,1 - 0,3
3,00 2,60 3,9 1,8 0,4 - 0,8 0,1 - 0,3
3,55 3,05 4,8 1,8 0,4 - 0,8 0,1 - 0,3
4,00 3,50 5,3 1,8 0,4 - 0,8 0,1 - 0,3
5,00 4,45 6,7 2,7 0,4 - 0,8 0,1 - 0,3
5,30 4,65 7,1 2,7 0,4 - 0,8 0,1 - 0,3
6,00 5,40 8,0 3,6 0,4 - 0,8 0,1 - 0,3
7,00 6,20 9,5 3,6 0,4 - 0,8 0,1 - 0,3 Gland designs
The tolerances is a combination of d3h9 + d4H8 or d5f7+d6H9.

1)
The ISO/DIN recommendations are preferred and are shown here in heavy print.
Additional information to the surface-finish-roughness and the gland dimensions of the pneumatic
application is available in the Parker O-Ring Handbook.
O-Ring Guide
Parker Hannifin
O-Ring Guide
Parker Hannifin
Sizing charts
The following charts provide dimensions for standard shrinkage materials

only. These correspond to AS568B dimensions. O-Rings manufactured from
compounds with different shrinkage rates will provide slightly different dimen-
sions and tolerances when standard tooling is used. Custom tooling may be
necessary for some compounds in order to meet AS568B dimensions and
tolerances.
For further information contact a Parker O-Ring applications engineer.
PTFE O-Rings
These O-Rings can be manufactured with inside diameters from 3 to 735 mm
and cross-sections from 1.0 to 20 mm.
PTFE and FEP encapsulated O-Rings

These O-Rings are manufactured for standard inch sizes: metric and special
sizes are available upon request.
Ultrathan® O-Rings
Please Note: Depending on the production method and inspection criteria,
Ultrathan®-O-Rings do not meet all requirements of the DIN ISO 3601. This
must be considered during assembly.
Metal O-Rings
They belong to the group of resilient metal seals and are used in harsh condi-
tions. With its “Enerrings” range, Parker provides different geometries (O-, C-,
E-profiles and others) used in applications with very high pressures, excep-
tional temperatures and when extremely low leakage rates or maximum media
resistance are required.
Characteristics of the 2-xxx series

The 2-xxx series from Parker Hannifin brings two particular advantages for
the user.
• ex-stock in following compounds:
N0674-70 (NBR 70 Shore A)
N0552-90 (NBR 90 Shore A)
E0540-80 (EPDM 80 Shore A)
V0747-75 (FKM 75 Shore A)
• For each 2-xxx series O-Ring we can offer a Parker Parbak® back-up ring
to fit. This is particularly important where large clearance gaps and/or high
pressures exist (see chapter Parbak® back-up ring).
Sizing charts
O-Ring Guide
Parker Hannifin
Sizing charts – 2-xxx-sizes
2-0xx-sizes, cross section d2 = 1,78 mm

Parker Ød Cross Parker Ød Cross
No. mm sect. d2 No. mm sect. d2
2-0011) 0,74 1,02 2-047 114,02 1,78
2-0021) 1,07 1,27 2-048 120,37 1,78
2-0031) 1,42 1,52 2-049 126,72 1,78
2-004 1,78 1,78 2-050 133,07 1,78
2-005 2,57 1,78
2-006 2,90 1,78
2-007 3,68 1,78
2-008 4,47 1,78
2-009 5,28 1,78
2-010 6,07 1,78
2-011 7,65 1,78
2-012 9,25 1,78
2-013 10,82 1,78
2-014 12,42 1,78
2-015 14,00 1,78
2-016 15,60 1,78
2-017 17,17 1,78
2-018 18,77 1,78
2-019 20,35 1,78
2-020 21,95 1,78
2-021 23,52 1,78
2-022 25,12 1,78
2-023 26,70 1,78
2-024 28,30 1,78
2-025 29,87 1,78
2-026 31,47 1,78
2-027 33,05 1,78
2-028 34,65 1,78
2-029 37,82 1,78
2-030 41,00 1,78
2-031 44,17 1,78
2-032 47,35 1,78
2-033 50,52 1,78
2-034 53,70 1,78
2-035 56,87 1,78
2-036 60,05 1,78
2-037 63,22 1,78
2-038 66,40 1,78
2-039 69,57 1,78
2-040 72,75 1,78
2-041 75,92 1,78
2-042 82,27 1,78
2-043 88,62 1,78
2-044 94,97 1,78
2-045 101,32 1,78
2-046 107,67 1,78
1)
Please note for these sizes the different cross section.
O-Ring Guide
Parker Hannifin

2-102 1,24 2,62 2-148 69,52 2,62
2-103 2,06 2,62 2-149 71,12 2,62
2-104 2,84 2,62 2-150 72,69 2,62
2-105 3,63 2,62 2-151 75,87 2,62
2-106 4,42 2,62 2-152 82,22 2,62
2-107 5,23 2,62 2-153 88,57 2,62
2-108 6,02 2,62 2-154 94,92 2,62
2-109 7,59 2,62 2-155 101,27 2,62
2-110 9,19 2,62 2-156 107,62 2,62
2-111 10,77 2,62 2-157 113,97 2,62
2-112 12,37 2,62 2-158 120,32 2,62
2-113 13,94 2,62 2-159 126,67 2,62
2-114 15,54 2,62 2-160 133,02 2,62
2-115 17,12 2,62 2-161 139,37 2,62
2-116 18,72 2,62 2-162 145,72 2,62
2-117 20,29 2,62 2-163 152,07 2,62
2-118 21,89 2,62 2-164 158,42 2,62
2-119 23,47 2,62 2-165 164,77 2,62
2-120 25,07 2,62 2-166 171,12 2,62
2-121 26,64 2,62 2-167 177,47 2,62
2-122 28,24 2,62 2-168 183,82 2,62
2-123 29,82 2,62 2-169 190,17 2,62
2-124 31,42 2,62 2-170 196,52 2,62
2-125 32,99 2,62 2-171 202,87 2,62
2-126 34,59 2,62 2-172 209,22 2,62
2-127 36,17 2,62 2-173 215,57 2,62
2-128 37,77 2,62 2-174 221,92 2,62
2-129 39,34 2,62 2-175 228,27 2,62
2-130 40,94 2,62 2-176 234,62 2,62
2-131 42,52 2,62 2-177 240,97 2,62
2-132 44,12 2,62 2-178 247,32 2,62
2-133 45,69 2,62
2-134 47,29 2,62
2-135 48,90 2,62
2-136 50,47 2,62
2-137 52,07 2,62
2-138 53,64 2,62
2-139 55,25 2,62
2-140 56,82 2,62
2-141 58,42 2,62
2-142 59,99 2,62
2-143 61,60 2,62
2-144 63,17 2,62
2-145 64,77 2,62
2-146 66,34 2,62
Sizing charts
2-147 67,95 2,62
O-Ring Guide
Parker Hannifin

2-201 4,34 3,53 2-247 117,07 3,53
2-202 5,94 3,53 2-248 120,24 3,53
2-203 7,52 3,53 2-249 123,42 3,53
2-204 9,12 3,53 2-250 126,59 3,53
2-205 10,69 3,53 2-251 129,77 3,53
2-206 12,29 3,53 2-252 132,94 3,53
2-207 13,87 3,53 2-253 136,12 3,53
2-208 15,47 3,53 2-254 139,29 3,53
2-209 17,04 3,53 2-255 142,47 3,53
2-210 18,64 3,53 2-256 145,64 3,53
2-211 20,22 3,53 2-257 148,52 3,53
2-212 21,82 3,53 2-258 151,99 3,53
2-213 23,39 3,53 2-259 158,34 3,53
2-214 24,99 3,53 2-260 164,69 3,53
2-215 26,57 3,53 2-261 171,04 3,53
2-216 28,17 3,53 2-262 177,39 3,53
2-217 29,74 3,53 2-263 183,74 3,53
2-218 31,34 3,53 2-264 190,09 3,53
2-219 32,92 3,53 2-265 196,44 3,53
2-220 34,52 3,53 2-266 202,79 3,53
2-221 36,09 3,53 2-267 209,14 3,53
2-222 37,69 3,53 2-268 215,49 3,53
2-223 40,87 3,53 2-269 221,84 3,53
2-224 44,04 3,53 2-270 228,19 3,53
2-225 47,22 3,53 2-271 234,54 3,53
2-226 50,39 3,53 2-272 240,89 3,53
2-227 53,57 3,53 2-273 247,24 3,53
2-228 56,74 3,53 2-274 253,59 3,53
2-229 59,92 3,53 2-275 266,29 3,53
2-230 63,09 3,53 2-276 278,99 3,53
2-231 66,27 3,53 2-277 291,69 3,53
2-232 69,44 3,53 2-278 304,39 3,53
2-233 72,62 3,53 2-279 329,79 3,53
2-234 75,79 3,53 2-280 355,19 3,53
2-235 78,97 3,53 2-281 380,59 3,53
2-236 82,14 3,53 2-282 405,26 3,53
2-237 85,32 3,53 2-283 430,66 3,53
2-238 88,49 3,53 2-284 456,06 3,53
2-239 91,67 3,53
2-240 94,84 3,53
2-241 98,02 3,53
2-242 101,19 3,53
2-243 104,37 3,53
2-244 107,54 3,53
2-245 110,72 3,53
2-246 113,89 3,53
O-Ring Guide
Parker Hannifin

2-309 10,46 5,33 2-355 132,72 5,33
2-310 12,07 5,33 2-356 135,89 5,33
2-311 13,64 5,33 2-357 139,07 5,33
2-312 15,24 5,33 2-358 142,24 3,53
2-313 16,81 5,33 2-359 145,42 5,33
2-314 18,42 5,33 2-360 148,59 5,33
2-315 19,99 5,33 2-361 151,77 5,33
2-316 21,59 5,33 2-362 158,12 5,33
2-317 23,16 5,33 2-363 164,47 5,33
2-318 24,77 5,33 2-364 170,82 5,33
2-319 26,34 5,33 2-365 177,17 5,33
2-320 27,94 5,33 2-366 183,52 5,33
2-321 29,51 5,33 2-367 189,87 5,33
2-322 31,12 5,33 2-368 196,22 5,33
2-323 32,69 5,33 2-369 202,57 5,33
2-324 34,29 5,33 2-370 208,92 5,33
2-325 37,47 5,33 2-371 215,27 5,33
2-326 40,64 5,33 2-372 221,62 5,33
2-327 43,82 5,33 2-373 227,97 5,33
2-328 46,99 5,33 2-374 234,34 5,33
2-329 50,17 5,33 2-375 240,67 5,33
2-330 53,34 5,33 2-376 247,02 5,33
2-331 56,52 5,33 2-377 253,37 5,33
2-332 59,69 3,53 2-378 266,07 5,33
2-333 62,87 3,53 2-379 278,77 5,33
2-334 66,04 3,53 2-380 291,47 3,53
2-335 69,22 5,33 2-381 304,17 5,33
2-336 72,39 5,33 2-382 329,57 5,33
2-337 75,57 5,33 2-383 354,97 5,33
2-338 78,74 5,33 2-384 380,37 5,33
2-339 81,92 5,33 2-385 405,26 5,33
2-340 85,09 5,33 2-386 430,66 5,33
2-341 88,27 5,33 2-387 456,06 5,33
2-342 91,44 5,33 2-388 481,41 5,33
2-343 94,62 5,33 2-389 506,81 5,33
2-344 97,79 5,33 2-390 532,21 5,33
2-345 100,97 5,33 2-391 557,61 5,33
2-346 104,14 5,33 2-392 582,68 5,33
2-347 107,32 5,33 2-393 608,08 5,33
2-348 110,49 5,33 2-394 633,48 5,33
2-349 113,67 5,33 2-395 658,88 5,33
2-350 116,84 5,33
2-351 120,02 5,33
2-352 123,19 5,33
2-353 126,37 5,33
Sizing charts
2-354 129,54 5,33
O-Ring Guide
Parker Hannifin

2-425 113,67 6,99 2-471 557,66 6,99
2-426 116,84 6,99 2-472 582,68 6,99
2-427 120,02 6,99 2-473 608,08 6,99
2-428 123,19 6,99 2-474 633,48 6,99
2-429 126,37 6,99 2-475 658,88 6,99
2-430 129,54 6,99
2-431 132,72 6,99
2-432 135,89 6,99
2-433 139,07 6,99
2-434 142,24 6,99
2-435 145,42 6,99
2-436 148,59 6,99
2-437 151,77 6,99
2-438 158,12 6,99
2-439 164,47 6,99
2-440 170,82 6,99
2-441 177,17 6,99
2-442 183,52 6,99
2-443 189,87 6,99
2-444 196,22 6,99
2-445 202,57 6,99
2-446 215,27 6,99
2-447 227,97 6,99
2-448 240,67 6,99
2-449 253,37 6,99
2-450 266,07 6,99
2-451 278,77 6,99
2-452 291,47 6,99
2-453 304,17 6,99
2-454 316,87 6,99
2-455 329,57 6,99
2-456 342,27 6,99
2-457 354,97 6,99
2-458 367,67 6,99
2-459 380,37 6,99
2-460 393,07 6,99
2-461 405,26 6,99
2-462 417,96 6,99
2-463 430,66 6,99
2-464 443,36 6,99
2-465 456,06 6,99
2-466 468,76 6,99
2-467 481,46 6,99
2-468 494,16 6,99
2-469 506,86 6,99
2-470 532,26 6,99
O-Ring Guide
Parker Hannifin
Parker Ød Cross
No. mm sect. d2
3-902 6,07 1,63
3-903 7,65 1,63
3-904 8,92 1,83
3-905 10,52 1,83
3-906 11,89 1,98
3-907 13,46 2,08
3-908 16,36 2,21
3-910 19,18 2,46
3-911 21,92 2,95
3-912 23,47 2,95
3-913 25,04 2,95
3-914 26,59 2,95
3-916 29,74 2,95
3-918 34,42 2,95
3-920 37,47 3,00
3-928 53,09 3,00
3-932 59,36 3,00
Sizing charts
O-Ring Guide
Parker Hannifin

5-035 45,36 3,53 5-605 35,60 3,60
5-037 51,71 3,53 5-606 37,30 3,60
5-051 1,78 1,02 5-612 8,74 1,78
5-052 6,86 1,78 5-613 11,10 1,78
5-092 701,68 6,99 5-614 9,93 2,62
5-108 4,47 1,27 5-615 11,91 2,62
5-157 33,99 2,34 5-616 13,11 2,62
5-190 3,35 1,78 5-617 15,88 2,62
5-212 9,75 1,78 5-618 25,81 3,53
5-239 14,48 2,69 5-643 16,51 1,14
5-243 15,34 2,62 5-664 8,13 1,78
5-256 17,96 2,62 5-670 36,50 1,78
5-321 39,60 3,53 5-673 7,75 1,88
5-330 42,52 5,33 5-676 15,49 1,47
5-332 42,85 3,53 5-683 3,10 1,60
5-361 67,84 3,53 5-686 6,30 2,39
5-381 88,27 6,99 5-690 17,30 2,40
5-434 180,54 6,99 5-700 9,00 3,00
5-445 210,24 6,99 5-701 49,20 3,53
5-488 316,56 2,62 5-702 58,74 3,53
5-525 425,83 3,18 5-703 65,09 3,53
5-578 2,60 1,90 5-704 71,44 3,53
5-579 3,40 1,90 5-705 74,61 3,53
5-580 4,20 1,90 5-716 9,19 3,00
5-581 4,90 1,90 5-805 64,39 1,78
5-582 5,70 1,90 5-816 80,31 1,78
5-583 6,40 1,90 5-843 118,72 2,62
5-584 7,20 1,90 5-850 125,09 6,60
5-585 8,00 1,88 5-976 264,79 6,60
5-586 8,90 1,90
5-587 8,90 2,70
5-588 10,50 2,70
5-589 12,10 2,70
5-590 13,59 2,69
5-591 15,10 2,70
5-592 16,90 2,70
5-593 18,40 2,70
5-594 18,30 3,60
5-595 19,80 3,60
5-596 21,30 3,60
5-597 23,00 3,60
5-598 24,60 3,60
5-599 26,20 3,60
5-600 27,80 3,60
5-601 29,30 3,60
5-602 30,80 3,60
5-603 32,50 3,60
5-604 34,10 3,60
O-Ring Guide
Parker Hannifin
Parker Ød Cross Parker Ød Cross Parker Ød Cross

No. mm sect. d2 No. mm sect. d2 No. mm sect. d2
6-001 6,00 2,00 6-053 12,00 1,50 6-113 53,00 5,00
6-002 8,00 2,00 6-054 45,00 2,00 6-114 60,00 5,00
6-003 10,00 2,00 6-055 50,00 2,50 6-115 125,00 8,00
6-005 15,00 2,00 6-056 30,00 3,00 6-116 10,00 1,00
6-006 16,70 1,45 6-058 12,30 2,40 6-118 15,00 1,50
6-007 18,00 3,15 6-059 135,00 3,23 6-119 19,50 1,50
6-008 21,00 2,00 6-060 135,00 3,43 6-120 9,00 1,80
6-009 47,50 4,00 6-061 146,00 3,23 6-121 81,00 3,00
6-010 9,00 1,50 6-063 5,35 1,50 6-122 186,44 6,99
6-011 7,00 1,50 6-065 12,00 2,00 6-123 118,50 3,00
6-012 9,30 2,40 6-066 23,00 2,50 6-124 12,00 3,00
6-013 89,50 3,00 6-067 14,00 2,50 6-125 18,00 4,00
6-015 42,00 1,50 6-069 5,00 1,50 6-126 25,30 1,60
6-016 13,00 2,50 6-070 8,30 2,40 6-128 15,00 5,00
6-017 20,00 2,50 6-072 15,00 3,20 6-129 13,23 1,78
6-018 3,00 1,00 6-074 8,00 1,50 6-130 20,00 3,00
6-019 4,00 1,10 6-075 13,00 2,00 6-132 18,00 2,50
6-020 2,70 1,50 6-076 18,00 2,00 6-133 4,70 1,90
6-021 3,50 1,20 6-078 20,00 1,50 6-134 7,50 2,50
6-022 24,00 2,00 6-079 6,00 5,00 6-135 14,30 2,40
6-023 27,30 2,40 6-080 7,00 3,00 6-136 33,00 2,00
6-025 101,00 3,00 6-082 45,00 1,50 6-137 100,00 5,00
6-026 137,00 3,00 6-083 10,00 1,50 6-138 2,50 1,30
6-027 40,00 2,00 6-084 11,00 1,50 6-139 22,00 2,00
6-028 7,00 2,50 6-085 15,00 1,80 6-140 28,00 2,00
6-030 73,00 3,00 6-086 11,00 2,00 6-141 55,00 2,00
6-031 70,00 3,00 6-087 18,00 1,50 6-142 30,70 2,00
6-032 118,00 2,00 6-088 22,00 1,50 6-143 14,00 1,50
6-033 13,00 1,50 6-089 21,00 3,50 6-146 16,00 2,00
6-034 29,50 1,50 6-090 14,00 2,00 6-147 27,00 3,00
6-035 4,00 1,50 6-091 7,50 1,50 6-148 177,00 2,00
6-036 22,00 2,50 6-092 24,80 1,50 6-149 205,00 2,00
6-037 30,00 3,15 6-095 132,00 3,00 6-151 63,00 4,00
6-038 6,00 1,50 6-096 13,50 2,75 6-152 210,00 5,00
6-039 19,00 2,50 6-097 31,00 4,50 6-153 320,50 5,33
6-040 15,00 1,60 6-099 20,00 1,30 6-154 36,30 1,78
6-041 17,90 1,25 6-100 91,00 3,00 6-155 48,00 3,00
6-042 16,00 3,00 6-101 28,00 1,50 6-156 30,00 2,50
6-043 15,00 3,00 6-102 40,60 4,00 6-157 98,00 3,00
6-044 17,00 2,00 6-103 161,00 3,00 6-158 437,00 3,00
6-045 72,00 3,00 6-104 4,00 2,00 6-159 46,02 3,53
6-046 38,00 2,00 6-105 10,00 2,50 6-160 13,75 2,80
6-047 35,00 2,00 6-106 15,00 2,50 6-161 9,00 2,50
6-048 30,00 2,00 6-107 60,00 4,10 6-162 7,30 2,70
6-049 27,00 2,00 6-108 79,60 3,20 6-163 13,10 1,60
6-050 24,20 3,00 6-109 58,00 4,00 6-164 420,00 5,00
Sizing charts
6-051 50,00 2,00 6-110 5,00 2,00 6-165 420,00 3,50

6-052 7,10 1,60 6-112 53,00 6,50 6-166 3,90 1,80
O-Ring Guide
Parker Hannifin

6-167 2,50 1,20 6-238 285,00 12,00 6-292 40,00 3,00
6-168 2,50 1,70 6-239 1029,00 10,00 6-293 47,20 5,70
6-170 159,00 4,00 6-240 1075,00 10,00 6-294 74,20 5,70
6-173 422,00 2,00 6-241 291,00 6,00 6-295 19,00 0,80
6-174 100,00 2,50 6-242 63,00 2,50 6-296 27,71 1,02
6-175 273,05 3,53 6-243 67,00 1,50 6-297 16,58 1,50
6-176 577,85 6,99 6-245 1154,00 10,00 6-298 23,60 1,02
6-177 18,30 2,40 6-247 624,00 6,99 6-299 191,00 1,78
6-178 74,00 2,00 6-248 783,00 6,99 6-300 19,80 2,40
6-179 533,40 3,18 6-249 910,00 6,99 6-301 677,00 7,00
6-180 28,00 2,20 6-250 936,00 6,99 6-302 955,00 12,60
6-183 219,00 5,30 6-251 3,70 1,90 6-303 763,01 6,99
6-184 83,80 2,62 6-252 231,50 6,00 6-304 887,00 6,99
6-189 25,50 2,00 6-253 106,80 2,66 6-305 736,00 3,53
6-190 840,00 12,00 6-254 218,00 12,00 6-306 2,20 1,60
6-192 8,10 1,60 6-255 126,00 5,00 6-307 3,33 1,02
6-193 44,35 3,00 6-256 480,06 10,00 6-308 18,50 1,50
6-194 49,50 3,00 6-257 93,39 1,47 6-309 87,30 2,00
6-195 79,50 3,00 6-258 17,96 2,62 6-311 7,00 2,00
6-198 12,50 2,00 6-258 17,96 2,62 6-313 16,50 2,70
6-202 514,00 8,00 6-260 506,00 2,62 6-314 31,02 3,00
6-203 367,00 3,50 6-261 504,00 6,99 6-316 67,00 2,50
6-204 381,00 5,00 6-263 22,70 1,50 6-317 7,80 3,60
6-205 39,20 3,00 6-265 619,50 8,00 6-318 151,70 5,60
6-206 15,30 2,40 6-266 693,50 10,10 6-320 608,00 10,00
6-207 13,00 3,50 6-267 734,00 6,99 6-321 700,00 10,00
6-208 26,70 2,50 6-268 827,00 7,00 6-322 810,00 10,00
6-209 398,00 8,00 6-269 950,50 10,06 6-323 45,00 2,50
6-212 20,34 4,25 6-270 1046,00 7,00 6-324 31,00 2,50
6-214 4,50 1,50 6-271 1103,00 10,00 6-328 500,00 3,53
6-215 425,00 6,00 6-272 69,24 3,40 6-329 36,00 2,50
6-216 90,00 3,00 6-273 196,00 12,00 6-330 850,00 10,00
6-218 10,60 2,00 6-274 115,00 3,00 6-331 431,80 7,10
6-221 38,00 5,00 6-275 20,30 2,40 6-332 1011,00 5,33
6-222 150,00 5,40 6-276 88,00 3,00 6-333 1042,00 5,33
6-223 15,80 2,40 6-277 8,79 1,14 6-334 960,00 5,33
6-224 138,00 6,00 6-278 622,00 8,00 6-335 914,00 5,33
6-226 200,00 6,00 6-279 810,00 7,10 6-336 262,00 5,33
6-227 42,00 3,00 6-280 1016,00 7,00 6-337 41,40 2,62
6-228 740,00 10,00 6-281 241,00 7,00 6-338 5,60 2,40
6-229 837,00 10,00 6-282 171,00 11,00 6-339 94,50 3,00
6-230 882,00 10,00 6-283 330,00 6,00 6-340 14,60 2,40
6-232 984,00 10,00 6-285 21,70 0,73 6-341 137,30 8,00
6-233 602,00 8,00 6-287 22,89 1,00 6-342 204,00 8,00
6-234 283,00 12,00 6-288 24,32 1,00 6-343 21,50 1,78
6-235 637,00 10,00 6-289 25,79 1,00 6-344 6,20 1,50
6-236 689,00 10,00 6-290 30,30 2,40 6-345 8,20 1,50
6-237 786,00 10,00 6-291 37,00 2,50 6-346 9,40 2,10
O-Ring Guide
Parker Hannifin

6-347 11,40 2,10 6-411 60,00 2,50 6-464 76,00 4,50
6-348 13,40 2,10 6-412 238,00 5,00 6-466 188,00 4,00
6-349 15,40 2,10 6-413 100,00 4,00 6-467 528,00 8,00
6-350 19,40 2,10 6-414 41,75 2,60 6-468 3,50 1,50
6-351 23,70 2,80 6-415 800,00 5,33 6-469 330,00 8,00
6-352 29,70 2,80 6-416 65,00 5,30 6-470 9,00 2,00
6-353 38,70 2,80 6-417 760,00 5,00 6-471 11,30 2,40
6-354 46,70 2,80 6-418 1,85 1,50 6-472 33,30 2,40
6-356 22,10 1,60 6-420 4,00 2,20 6-473 13,60 2,50
6-360 19,00 2,00 6-421 112,00 3,00 6-474 63,00 4,50
6-361 3,30 2,40 6-422 607,00 4,00 6-475 10,30 2,40
6-363 865,00 12,00 6-423 46,87 2,62 6-476 17,00 1,50
6-364 1,98 0,84 6-425 18,00 3,00 6-480 6,60 1,50
6-366 11,89 1,78 6-426 25,00 4,00 6-483 74,00 3,00
6-367 17,81 1,02 6-427 57,00 3,00 6-485 225,00 5,00
6-369 1,50 1,00 6-428 4,00 2,50 6-486 7,80 4,60
6-370 48,00 2,00 6-430 21,20 2,40 6-487 2,90 1,02
6-372 720,00 6,99 6-431 44,00 2,00 6-489 21,00 6,00
6-373 9,53 1,60 6-432 7,50 2,00 6-491 3,50 1,10
6-374 6,30 1,60 6-433 38,00 2,50 6-492 174,00 3,00
6-375 10,25 1,40 6-434 51,50 1,50 6-493 22,00 1,39
6-376 25,00 5,00 6-435 48,40 4,85 6-494 162,50 3,53
6-377 35,00 5,30 6-436 240,00 12,00 6-495 190,00 3,00
6-378 140,00 4,00 6-437 8,00 1,00 6-496 151,00 3,00
6-379 138,00 2,10 6-438 12,00 1,00 6-497 27,50 1,50
6-380 594,51 7,14 6-439 16,00 1,00 6-497 27,50 1,50
6-381 647,70 6,99 6-440 6,80 2,00 6-498 90,00 2,00
6-382 20,20 3,00 6-441 3,00 1,50 6-499 18,60 2,00
6-385 1071,00 14,40 6-442 25,00 2,00 6-500 66,00 2,00
6-387 25,80 3,30 6-443 24,00 6,00 6-501 65,00 2,00
6-388 17,40 2,50 6-444 159,20 5,70 6-502 220,00 3,00
6-389 723,90 6,99 6-445 82,00 4,00 6-503 19,30 2,40
6-390 8,00 3,00 6-446 94,00 2,00 6-504 120,00 3,00
6-392 99,00 6,99 6-447 58,00 2,00 6-505 270,00 3,00
6-393 1060,00 10,00 6-448 119,20 5,70 6-508 849,00 7,00
6-394 514,00 8,00 6-449 41,00 3,00 6-509 819,00 7,00
6-395 9,35 1,60 6-451 129,20 5,70 6-510 315,00 6,00
6-396 18,20 3,00 6-452 85,20 9,25 6-511 140,00 3,00
6-397 14,50 1,60 6-453 24,00 4,00 6-512 144,00 3,70
6-399 94,50 3,00 6-454 30,00 4,00 6-513 82,00 2,00
6-400 27,00 1,50 6-455 62,00 2,50 6-514 250,00 3,00
6-401 4,50 1,00 6-456 84,00 3,00 6-515 134,00 3,00
6-402 3,50 1,25 6-457 125,00 5,00 6-516 230,00 3,00
6-404 19,00 5,00 6-458 400,00 12,00 6-517 335,00 3,00
6-405 93,50 9,50 6-459 37,36 2,60 6-518 355,00 3,00
6-407 242,00 6,00 6-460 996,00 7,00 6-520 8,00 2,20
Sizing charts
6-408 0,80 1,60 6-461 213,68 7,14 6-521 716,00 8,00

6-409 940,00 10,00 6-462 558,00 10,00 6-523 65,00 3,00
O-Ring Guide
Parker Hannifin

6-524 17,00 1,10 6-577 130,00 6,00 6-634 71,00 4,50
6-525 41,28 3,53 6-578 445,00 8,00 6-635 236,00 7,00
6-527 974,00 7,00 6-579 87,00 3,00 6-636 64,00 3,00
6-528 16,00 1,50 6-580 118,31 3,53 6-638 281,00 5,00
6-529 524,00 10,00 6-581 6,50 1,50 6-640 97,00 1,50
6-530 455,00 8,00 6-582 95,50 3,53 6-642 40,00 1,50
6-531 710,00 5,33 6-583 5,00 1,20 6-643 57,00 1,50
6-532 10,00 2,20 6-584 13,00 1,00 6-644 638,89 5,44
6-534 1004,00 8,00 6-585 34,40 3,10 6-645 665,00 5,00
6-535 680,00 5,00 6-586 39,40 3,10 6-646 32,00 2,70
6-536 635,00 5,00 6-587 74,40 3,10 6-647 617,00 7,00
6-538 2,40 1,90 6-588 84,40 3,10 6-648 820,00 7,00
6-539 70,00 4,50 6-589 105,00 2,00 6-649 798,00 7,00
6-540 33,00 2,50 6-592 8,00 1,25 6-650 853,00 7,00
6-541 41,00 2,50 6-593 19,20 3,00 6-651 9,00 4,00
6-542 44,20 2,50 6-594 42,00 2,50 6-652 6,00 5,20
6-543 6,00 1,00 6-595 24,00 2,50 6-653 664,00 5,00
6-544 24,00 1,50 6-596 65,00 4,50 6-654 28,00 2,50
6-545 35,00 4,50 6-597 875,00 8,00 6-655 174,20 5,70
6-546 205,00 3,00 6-598 375,00 5,34 6-656 26,00 2,00
6-547 197,00 3,00 6-600 209,20 5,70 6-657 7,00 1,00
6-548 5,70 3,20 6-601 100,00 2,00 6-658 8,00 1,40
6-549 3,00 1,20 6-602 140,00 10,00 6-659 67,00 3,00
6-550 12,50 1,10 6-603 50,00 4,00 6-660 27,00 5,00
6-551 10,80 1,50 6-604 240,00 3,00 6-661 7,50 1,25
6-552 70,00 2,00 6-605 10,00 3,00 6-662 12,00 3,80
6-553 304,80 1,78 6-606 35,00 2,50 6-663 30,00 4,65
6-554 17,40 2,10 6-607 315,00 4,00 6-664 54,00 4,65
6-555 37,00 5,00 6-608 94,20 5,70 6-665 60,00 3,00
6-556 52,00 3,00 6-609 36,00 2,20 6-666 24,00 1,00
6-556 52,00 3,00 6-610 9,00 1,20 6-667 770,00 10,00
6-557 18,60 3,50 6-611 25,00 1,50 6-668 708,00 10,00
6-558 87,20 2,50 6-612 125,00 3,00 6-669 450,00 10,00
6-559 137,00 14,00 6-613 4,00 1,00 6-670 550,00 10,00
6-560 59,70 7,00 6-614 190,00 5,00 6-671 245,00 10,00
6-561 88,30 7,00 6-615 3,00 2,00 6-672 364,00 10,00
6-562 16,00 2,50 6-618 234,32 1,78 6-673 48,20 1,78
6-564 8,00 2,50 6-619 20,00 2,00 6-674 120,00 1,50
6-566 40,00 2,50 6-621 535,46 7,24 6-676 84,00 2,50
6-568 56,00 2,00 6-622 34,00 2,80 6-677 11,50 1,00
6-569 80,00 2,00 6-623 149,20 5,70 6-678 36,00 2,00
6-570 215,00 6,00 6-626 580,00 8,00 6-682 375,00 10,00
6-571 10,15 1,40 6-627 10,10 1,00 6-683 15,00 1,00
6-572 6,50 2,00 6-628 19,30 3,65 6-684 3,20 1,02
6-573 19,00 1,50 6-630 51,00 3,00 6-685 3,40 2,00
6-574 86,84 5,33 6-631 179,00 3,00 6-686 3,20 1,60
6-575 39,00 2,00 6-632 16,00 1,25 6-687 21,50 1,50
6-576 160,00 3,00 6-633 61,00 4,50 6-688 133,35 5,33
O-Ring Guide
Parker Hannifin

6-689 150,00 3,00 6-747 196,00 4,00 6-803 30,00 3,55
6-690 546,00 7,00 6-748 5,70 1,05 6-804 92,50 3,55
6-692 8,50 1,50 6-749 26,00 2,50 6-805 77,00 2,00
6-693 130,00 2,50 6-750 45,90 1,50 6-806 105,00 3,50
6-694 36,00 2,10 6-751 5,30 2,40 6-807 370,00 5,50
6-698 140,00 2,00 6-752 34,65 2,60 6-808 20,00 3,55
6-699 62,00 3,00 6-753 39,50 2,60 6-809 43,70 1,80
6-700 96,00 2,00 6-754 76,00 2,50 6-810 54,50 2,65
6-701 695,00 6,99 6-755 18,00 5,00 6-812 133,50 12,00
6-702 707,00 6,99 6-756 148,00 10,00 6-813 341,00 14,00
6-703 55,30 2,00 6-757 73,00 4,00 6-814 164,20 5,84
6-704 180,00 3,00 6-758 19,75 2,50 6-815 109,20 5,84
6-705 14,00 3,00 6-759 43,25 2,60 6-816 670,00 10,00
6-706 189,20 5,70 6-760 31,95 2,60 6-817 590,00 10,00
6-707 865,00 8,40 6-762 107,31 6,99 6-818 160,00 4,00
6-708 929,00 6,00 6-763 89,60 5,70 6-819 54,00 3,00
6-709 565,00 7,00 6-764 59,60 5,85 6-820 79,00 1,50
6-710 7,50 1,00 6-766 31,70 3,50 6-821 83,00 1,00
6-711 388,00 5,00 6-767 109,40 3,10 6-822 85,00 1,50
6-713 6,00 1,25 6-768 119,60 5,70 6-823 10,00 2,65
6-714 1,80 1,00 6-769 114,40 3,10 6-824 69,00 3,00
6-715 8,80 1,00 6-772 44,70 3,50 6-825 27,00 3,20
6-716 320,00 6,00 6-773 155,00 10,00 6-826 78,00 3,50
6-717 11,00 2,50 6-774 12,00 2,50 6-827 470,00 10,00
6-718 258,40 1,60 6-775 515,00 10,00 6-831 590,00 3,50
6-719 57,00 2,50 6-777 10,60 1,80 6-832 96,00 9,00
6-720 93,00 2,00 6-778 53,00 1,80 6-833 137,00 4,00
6-722 128,00 2,00 6-779 19,00 2,65 6-834 484,86 3,53
6-723 380,00 4,00 6-780 21,20 2,65 6-835 449,50 6,99
6-724 102,00 3,00 6-781 28,00 2,65 6-836 543,50 6,99
6-725 16,56 1,78 6-782 38,70 2,65 6-837 109,20 5,70
6-726 45,00 5,00 6-783 45,00 2,65 6-838 32,00 4,00
6-728 26,00 1,00 6-784 32,50 3,55 6-839 10,10 1,78
6-729 78,00 3,00 6-785 56,00 3,55 6-839 10,10 1,78
6-730 13,00 3,00 6-786 67,00 3,55 6-840 282,37 3,53
6-731 18,00 1,30 6-787 71,00 3,55 6-841 175,00 10,00
6-733 85,00 2,00 6-788 80,00 3,55 6-842 255,00 4,00
6-734 430,00 12,00 6-790 80,00 1,80 6-844 135,00 4,00
6-736 3,17 1,02 6-791 50,00 4,50 6-845 42,50 1,80
6-737 13,89 1,30 6-792 61,00 5,00 6-845 42,50 1,80
6-738 5,33 1,02 6-793 20,00 1,80 6-846 234,20 7,00
6-740 109,00 3,00 6-794 28,00 1,80 6-848 18,14 1,78
6-741 428,00 5,70 6-797 2,00 1,00 6-849 4,80 0,75
6-742 614,00 7,00 6-798 19,00 1,80 6-850 32,00 2,50
6-743 93,00 3,00 6-799 468,00 6,00 6-851 61,00 2,00
6-745 25,30 2,40 6-800 500,00 8,00 6-852 64,39 1,78
Sizing charts
6-745 25,30 2,40 6-801 21,20 3,55 6-853 85,00 4,00

6-746 169,20 5,70 6-802 33,50 2,65 6-854 298,00 2,62
O-Ring Guide
Parker Hannifin

6-855 6,30 1,80 6-911 165,00 2,00 6-960 5,61 1,68
6-856 7,50 1,80 6-912 49,20 3,00 6-961 122,00 3,00
6-857 16,00 1,80 6-913 27,20 3,00 6-962 151,00 4,00
6-861 5,80 0,75 6-914 34,00 3,00 6-963 93,00 4,00
6-862 180,00 10,00 6-915 110,00 5,00 6-964 50,00 3,00
6-863 95,00 4,00 6-916 25,00 2,50 6-965 10,40 1,00
6-864 238,00 4,00 6-917 296,00 6,00 6-966 2,50 1,00
6-865 201,00 4,00 6-918 234,10 8,40 6-967 245,00 10,85
6-866 9,30 1,50 6-919 515,90 6,00 6-968 5,50 1,50
6-867 89,20 5,70 6-920 195,50 12,00 6-969 25,00 3,00
6-868 195,00 3,50 6-921 76,00 3,00 6-970 37,00 1,50
6-869 32,00 2,00 6-922 7,00 1,40 6-972 40,82 2,59
6-871 260,00 5,00 6-923 36,00 3,00 6-973 3,50 0,80
6-872 150,00 4,00 6-924 900,00 10,00 6-974 17,00 3,50
6-873 112,00 4,00 6-925 2,06 0,66 6-975 44,83 2,67
6-874 95,00 5,00 6-927 380,00 8,00 6-976 10,50 1,50
6-875 41,60 2,40 6-928 11,50 1,50 6-977 28,00 3,00
6-876 16,50 1,00 6-929 13,30 2,40 6-978 78,00 2,50
6-877 22,00 4,00 6-930 477,00 10,50 6-979 72,00 2,50
6-878 245,00 3,00 6-931 10,00 6,50 6-980 36,00 1,50
6-879 54,00 4,00 6-932 150,00 2,00 6-981 36,00 2,00
6-880 2,30 1,30 6-933 6,40 1,30 6-982 114,00 3,00
6-881 37,00 3,00 6-934 401,71 3,53 6-983 164,20 5,70
6-882 45,00 1,00 6-935 307,57 3,53 6-984 2965,00 7,00
6-883 60,00 1,20 6-936 272,64 3,53 6-985 56,00 3,00
6-884 68,00 3,00 6-937 7,00 2,35 6-986 635,00 9,00
6-885 80,50 4,00 6-938 409,00 6,99 6-988 270,00 5,33
6-887 172,00 3,00 6-939 434,00 6,99 6-990 69,00 2,50
6-889 174,30 3,50 6-940 15,30 2,20 6-991 86,00 2,62
6-890 870,00 8,00 6-941 68,00 5,00 6-992 79,30 2,62
6-891 16,00 2,65 6-942 23,60 2,90 6-993 35,00 3,20
6-892 400,00 5,00 6-943 748,50 7,00 6-994 4,00 3,00
6-893 52,20 5,70 6-944 46,00 4,00 6-995 105,00 4,00
6-894 27,00 2,50 6-945 11,50 2,50 6-996 43,00 3,00
6-895 359,20 13,80 6-946 17,00 3,00 6-997 45,00 3,00
6-896 257,20 14,00 6-947 325,00 5,33 6-998 19,00 3,00
6-897 380,00 6,00 6-948 274,00 5,33 6-999 23,00 2,00
6-898 429,00 6,00 6-949 223,00 5,33 6-1000 29,00 3,00
6-899 70,00 5,00 6-950 5,50 2,00 6-1001 75,00 4,00
6-900 83,00 3,00 6-951 526,00 6,99 6-1002 78,00 5,00
6-902 130,00 5,00 6-952 9,50 1,00 6-1003 120,00 6,00
6-903 110,00 3,00 6-953 11,00 3,00 6-1004 172,00 6,00
6-904 13,00 1,30 6-954 214,63 2,18 6-1005 114,20 5,70
6-905 28,00 1,00 6-955 5,00 1,75 6-1006 102,00 6,00
6-906 1,00 1,00 6-956 7,10 2,00 6-1007 187,10 8,40
6-907 6,80 1,80 6-957 25,60 1,93 6-1008 463,00 7,00
6-909 449,00 12,00 6-958 20,00 4,00 6-1010 249,30 5,70
6-910 10,00 2,62 6-959 7,00 1,20 6-1012 84,30 5,70
O-Ring Guide
Parker Hannifin

6-1013 72,00 4,00 6-1060 43,00 4,00 6-1108 180,52 5,33
6-1014 85,00 3,00 6-1061 92,00 4,00 6-1109 17,20 3,00
6-1015 132,00 4,00 6-1062 95,00 4,50 6-1110 180,00 6,00
6-1016 87,20 5,70 6-1063 220,00 5,00 6-1111 88,00 8,00
6-1017 613,92 6,99 6-1064 22,20 3,00 6-1112 23,00 3,00
6-1018 289,42 5,87 6-1065 55,00 3,00 6-1113 90,00 2,50
6-1019 2,35 1,00 6-1066 1960,00 10,85 6-1114 40,00 6,00
6-1020 46,00 3,00 6-1067 2072,00 10,00 6-1115 22,00 1,30
6-1021 16,00 4,00 6-1068 175,00 6,00 6-1116 35,00 3,00
6-1022 6,75 1,78 6-1069 77,10 2,62 6-1117 62,00 6,00
6-1023 40,00 5,00 6-1070 49,20 5,70 6-1118 210,00 4,00
6-1024 53,00 3,50 6-1071 755,00 5,00 6-1119 180,00 8,00
6-1025 38,00 3,50 6-1072 465,00 5,00 6-1120 3,00 2,70
6-1026 5,00 1,00 6-1073 128,00 5,00 6-1121 185,00 6,00
6-1027 24,00 3,00 6-1074 105,00 5,00 6-1122 9,00 3,00
6-1028 185,00 5,00 6-1075 75,00 3,00 6-1123 64,20 5,70
6-1029 94,00 4,00 6-1076 120,00 4,00 6-1124 35,15 3,15
6-1030 248,00 5,00 6-1077 81,00 4,00 6-1125 311,00 10,00
6-1031 28,00 5,00 6-1078 23,00 1,50 6-1126 329,00 10,00
6-1032 7,70 2,00 6-1079 750,00 5,00 6-1127 580,50 3,53
6-1033 2,80 1,60 6-1080 485,00 5,00 6-1128 460,00 5,34
6-1034 61,00 4,00 6-1081 160,00 5,00 6-1129 335,00 7,00
6-1035 5,00 2,50 6-1082 26,00 3,00 6-1130 840,50 7,00
6-1036 4,60 2,00 6-1083 22,00 3,00 6-1131 835,50 7,00
6-1037 65,00 5,00 6-1084 130,00 4,00 6-1132 250,00 8,00
6-1038 39,00 3,00 6-1085 135,00 5,00 6-1133 9,52 1,78
6-1039 16,30 2,40 6-1086 22,30 2,40 6-1134 84,00 3,50
6-1039 16,30 2,40 6-1087 36,20 3,00 6-1135 345,00 5,00
6-1040 18,00 2,20 6-1088 180,00 4,00 6-1136 140,00 5,00
6-1041 47,00 2,50 6-1089 99,20 5,70 6-1137 57,00 4,00
6-1042 261,00 6,00 6-1090 336,00 7,00 6-1138 33,00 3,00
6-1043 338,00 6,00 6-1091 20,00 5,00 6-1139 200,00 5,00
6-1044 190,00 4,00 6-1092 38,00 3,00 6-1140 36,00 3,00
6-1045 162,00 2,50 6-1093 142,00 6,00 6-1141 47,00 2,00
6-1046 145,00 5,00 6-1094 63,00 6,00 6-1142 360,00 4,00
6-1047 34,00 1,00 6-1095 94,00 3,00 6-1143 124,00 4,00
6-1048 218,00 5,80 6-1096 129,00 4,00 6-1144 41,00 1,50
6-1049 14,00 1,10 6-1097 170,00 4,00 6-1145 56,00 4,00
6-1050 218,00 6,00 6-1098 179,20 5,70 6-1146 31,50 3,15
6-1051 142,00 4,00 6-1099 15,00 4,00 6-1147 150,00 6,00
6-1052 88,00 4,00 6-1100 35,00 1,50 6-1148 39,40 2,10
6-1053 65,00 4,00 6-1101 360,00 7,50 6-1149 6,50 1,20
6-1054 44,00 3,00 6-1102 5,69 1,14 6-1150 34,40 2,10
6-1055 103,00 5,00 6-1103 90,00 7,00 6-1151 115,00 2,00
6-1056 93,00 5,00 6-1104 62,00 4,00 6-1152 79,20 5,70
6-1057 80,00 4,00 6-1105 116,50 1,78 6-1153 206,00 7,00
Sizing charts
6-1058 185,00 3,00 6-1106 108,00 8,00 6-1154 136,00 4,00

6-1059 47,00 4,00 6-1107 152,00 8,00 6-1155 245,00 5,00
O-Ring Guide
Parker Hannifin

6-1156 890,00 5,00 6-1203 30,00 2,15 6-1251 6,36 0,72
6-1157 615,00 5,00 6-1204 24,69 1,78 6-1252 21,00 4,00
6-1158 520,00 5,00 6-1205 362,00 5,00 6-1253 49,00 2,00
6-1159 115,00 5,00 6-1206 9,50 2,50 6-1254 368,00 6,00
6-1160 695,00 5,00 6-1207 142,00 12,00 6-1255 343,00 6,00
6-1161 160,00 5,00 6-1208 10,90 1,20 6-1256 440,00 4,00
6-1162 63,00 3,50 6-1209 62,00 3,53 6-1257 37,50 4,00
6-1163 102,00 4,00 6-1210 320,00 3,00 6-1258 330,00 5,00
6-1164 114,00 5,00 6-1211 228,00 3,00 6-1259 26,00 4,00
6-1165 88,00 6,00 6-1212 70,00 8,00 6-1260 192,00 4,00
6-1166 35,00 4,00 6-1213 1005,00 15,00 6-1261 62,00 4,00
6-1167 248,00 7,00 6-1214 90,00 5,00 6-1262 632,00 6,00
6-1168 300,00 6,00 6-1215 780,00 7,00 6-1263 246,00 4,00
6-1169 115,00 5,00 6-1216 10,00 1,60 6-1264 2,20 1,00
6-1170 515,00 5,00 6-1217 131,50 4,00 6-1265 90,00 4,80
6-1171 315,00 5,00 6-1218 340,00 4,00 6-1266 7,30 2,40
6-1172 320,62 3,53 6-1219 480,00 4,00 6-1267 40,00 5,00
6-1173 764,00 6,99 6-1220 610,00 4,00 6-1268 6,30 2,40
6-1174 85,00 6,00 6-1221 500,00 5,00 6-1269 1,50 0,60
6-1175 104,50 3,00 6-1222 770,00 7,00 6-1270 80,00 3,00
6-1176 46,00 2,00 6-1223 860,00 3,00 6-1271 56,70 3,00
6-1177 172,00 4,00 6-1224 42,00 5,00 6-1272 68,00 4,00
6-1178 45,00 4,00 6-1225 222,00 7,00 6-1273 66,00 5,00
6-1179 90,00 4,00 6-1226 50,00 5,00 6-1274 54,00 2,00
6-1180 120,00 5,00 6-1227 252,00 4,00 6-1275 11,60 2,20
6-1181 80,00 5,00 6-1228 8,50 2,00 6-1276 19,00 1,00
6-1182 112,00 7,00 6-1229 564,30 6,99 6-1277 135,00 3,00
6-1183 7,50 2,10 6-1230 10,80 1,90 6-1278 299,50 5,00
6-1184 54,00 2,00 6-1231 260,00 4,00 6-1279 273,60 5,00
6-1185 52,50 1,80 6-1232 26,00 1,50 6-1280 180,00 5,00
6-1186 55,00 4,00 6-1233 145,00 4,00 6-1281 125,00 2,50
6-1187 37,00 3,00 6-1234 52,00 2,50 6-1282 238,00 10,00
6-1188 37,00 2,00 6-1235 336,00 5,33 6-1283 195,00 5,00
6-1189 43,00 2,00 6-1236 11,00 1,00 6-1284 240,00 8,00
6-1190 266,00 4,00 6-1237 100,00 8,00 6-1285 49,20 3,53
6-1191 290,00 5,00 6-1238 194,00 14,00 6-1286 8,65 2,80
6-1192 55,00 3,50 6-1239 238,00 14,00 6-1287 4,00 1,80
6-1193 66,00 3,00 6-1240 285,00 14,10 6-1288 14,00 1,00
6-1194 70,00 4,00 6-1241 385,00 14,20 6-1289 24,50 3,15
6-1195 45,00 4,50 6-1242 415,00 14,20 6-1290 170,00 5,00
6-1196 48,00 4,00 6-1243 480,00 14,00 6-1291 4,50 2,25
6-1196 48,00 4,00 6-1244 585,00 14,00 6-1292 160,00 6,00
6-1197 34,00 2,00 6-1245 735,00 15,00 6-1293 230,00 8,00
6-1198 13,30 1,20 6-1246 853,00 20,00 6-1294 155,00 3,00
6-1199 125,00 4,00 6-1247 1,53 0,97 6-1295 150,00 5,00
6-1200 104,00 5,30 6-1248 46,00 5,00 6-1296 130,00 3,00
6-1201 260,00 8,00 6-1249 7,30 3,40 6-1297 9,50 2,00
6-1202 13,30 3,00 6-1250 225,00 3,00 6-1298 17,86 2,62
O-Ring Guide
Parker Hannifin

6-1299 540,00 5,00 6-1351 309,30 5,70 6-1402 165,00 4,00
6-1300 579,00 5,00 6-1352 419,30 5,70 6-1403 265,00 5,00
6-1301 602,00 5,00 6-1353 21,00 1,00 6-1404 325,00 5,00
6-1302 216,00 4,00 6-1354 58,00 3,00 6-1405 4,05 1,77
6-1303 99,00 3,00 6-1356 175,00 5,00 6-1406 85,00 6,99
6-1304 1840,00 5,00 6-1357 75,00 2,50 6-1407 9,50 1,80
6-1305 100,00 3,00 6-1358 0,90 0,53 6-1408 331,50 6,00
6-1306 97,00 5,00 6-1359 304,80 3,18 6-1409 534,00 8,00
6-1307 200,00 4,00 6-1360 236,00 6,00 6-1410 1,00 0,63
6-1308 640,00 6,00 6-1361 12,10 1,60 6-1411 33,00 3,50
6-1309 740,00 6,00 6-1362 39,20 5,70 6-1412 38,00 5,00
6-1310 300,00 10,00 6-1363 3,90 2,40 6-1413 43,00 5,50
6-1311 21,00 3,00 6-1364 17,50 4,00 6-1414 35,00 5,00
6-1312 6,00 1,52 6-1365 17,00 4,00 6-1415 97,00 4,00
6-1313 11,50 2,00 6-1366 30,00 5,00 6-1416 8,10 2,00
6-1314 9,50 1,78 6-1367 110,00 2,50 6-1417 77,00 2,50
6-1315 22,00 2,10 6-1368 60,00 4,50 6-1418 661,00 14,00
6-1316 80,00 3,50 6-1369 76,00 2,00 6-1419 62,00 1,50
6-1317 53,80 4,00 6-1370 300,00 8,00 6-1420 500,00 6,00
6-1318 155,00 4,00 6-1371 310,00 5,00 6-1421 115,00 6,00
6-1319 42,00 4,00 6-1372 65,00 1,80 6-1422 7,65 2,00
6-1320 107,00 8,00 6-1373 20,00 2,65 6-1422 7,65 2,00
6-1321 7,10 3,60 6-1374 395,00 12,00 6-1423 29,00 2,50
6-1322 116,00 3,00 6-1375 21,20 1,80 6-1424 297,00 4,00
6-1323 11,60 1,20 6-1376 11,20 1,80 6-1425 220,00 7,00
6-1324 155,00 5,00 6-1377 65,00 2,65 6-1426 238,00 6,00
6-1325 1865,00 5,00 6-1378 28,20 1,00 6-1427 120,00 10,00
6-1326 410,00 6,00 6-1379 12,50 1,80 6-1428 185,00 4,00
6-1327 6,00 2,50 6-1380 68,00 3,50 6-1429 91,00 2,00
6-1328 383,60 5,00 6-1381 105,00 3,00 6-1430 19,35 1,00
6-1329 134,00 8,00 6-1384 240,66 7,40 6-1431 23,00 4,00
6-1330 12,00 10,60 6-1385 5,60 1,80 6-1432 16,00 6,00
6-1333 51,94 3,53 6-1386 11,00 3,40 6-1433 23,00 6,00
6-1334 340,00 10,00 6-1387 390,00 4,00 6-1434 5,00 1,60
6-1335 412,00 8,00 6-1388 256,00 4,00 6-1435 440,00 4,30
6-1336 167,50 3,50 6-1389 38,00 1,50 6-1436 131,00 5,30
6-1337 11,10 1,82 6-1390 155,00 3,53 6-1437 50,00 3,50
6-1338 23,80 2,40 6-1391 192,00 8,00 6-1438 54,70 3,53
6-1339 13,70 2,50 6-1392 354,96 6,09 6-1439 61,70 4,50
6-1340 15,50 2,60 6-1393 14,70 3,50 6-1440 9,55 1,75
6-1341 17,20 1,82 6-1394 5,15 1,80 6-1441 272,40 6,99
6-1342 14,00 1,82 6-1395 100,00 6,00 6-1442 270,00 7,00
6-1345 14,00 1,60 6-1396 15,08 2,62 6-1443 675,00 5,30
6-1346 240,00 5,00 6-1397 11,60 2,7 6-1444 490,00 5,00
6-1347 53,00 2,00 6-1398 15,00 3,50 6-1445 85,00 5,00
6-1348 73,00 7,00 6-1399 42,00 4,50 6-1446 21,30 2,30
Sizing charts
6-1349 44,30 5,70 6-1400 7,00 2,75 6-1447 27,00 2,70

6-1350 104,30 5,70 6-1401 31,00 2,00 6-1448 55,00 5,00
O-Ring Guide
Parker Hannifin

6-1449 10,00 8,00 6-1496 3,90 1,80 6-1543 18,80 1,90
6-1450 198,00 4,00 6-1497 40,00 4,00 6-1544 2,96 1,04
6-1451 235,00 4,00 6-1498 11,50 1,80 6-1545 24,50 1,00
6-1452 92,00 3,00 6-1499 9,60 2,00 6-1546 328,00 6,99
6-1453 195,00 6,00 6-1499 9,60 2,00 6-1547 39,00 2,50
6-1454 11,50 2,30 6-1500 7,52 3,51 6-1548 15,10 2,60
6-1455 94,00 3,50 6-1501 5,46 0,89 6-1549 18,20 2,60
6-1456 24,60 3,40 6-1502 9,78 1,27 6-1550 22,20 3,10
6-1457 86,00 4,00 6-1503 12,83 1,27 6-1551 28,30 3,10
6-1458 320,00 6,50 6-1504 13,59 2,69 6-1552 54,40 4,25
6-1459 22,42 1,78 6-1505 10,78 2,62 6-1553 152,00 1,78
6-1460 10,20 1,50 6-1506 1,42 1,58 6-1553 152,00 1,78
6-1461 31,57 1,98 6-1507 92,20 2,62 6-1554 70,00 3,50
6-1462 70,00 2,50 6-1508 88,50 6,50 6-1555 14,00 2,20
6-1463 19,50 3,50 6-1509 118,00 4,00 6-1556 32,00 1,50
6-1464 14,50 3,00 6-1510 11,10 2,15 6-1557 2,97 1,03
6-1465 20,50 2,00 6-1511 9,50 2,15 6-1558 7,00 1,47
6-1466 12,00 1,30 6-1512 32,00 1,50 6-1559 136,00 3,00
6-1467 77,50 2,62 6-1513 54,00 1,50 6-1560 221,00 1,78
6-1468 11,75 1,55 6-1514 10,00 0,50 6-1561 10,20 1,80
6-1469 12,00 1,40 6-1515 119,60 3,20 6-1562 8,00 1,60
6-1470 21,00 1,50 6-1516 11,00 1,60 6-1563 198,00 8,00
6-1471 6,00 1,80 6-1517 29,10 1,60 6-1564 240,00 8,00
6-1472 82,00 3,00 6-1518 10,00 1,20 6-1565 205,00 5,00
6-1473 128,00 3,00 6-1519 7,50 1,50 6-1566 12,00 1,20
6-1474 30,00 2,25 6-1520 44,35 2,58 6-1567 12,50 1,50
6-1475 78,00 2,00 6-1521 450,00 2,62 6-1568 3,80 1,90
6-1476 275,00 5,00 6-1522 255,00 5,00 6-1569 17,30 2,20
6-1477 285,00 5,00 6-1523 7,10 1,37 6-1570 7,50 3,00
6-1478 31,00 1,50 6-1524 16,30 1,40 6-1571 13,50 1,50
6-1479 3,15 1,50 6-1525 11,10 1,60 6-1572 126,00 5,10
6-1480 17,70 1,78 6-1526 13,00 1,30 6-1573 86,50 4,00
6-1481 8,56 1,07 6-1527 7,40 3,70 6-1574 19,00 2,42
6-1482 39,00 5,00 6-1528 621,00 8,50 6-1575 11,50 1,78
6-1483 47,00 5,50 6-1529 165,00 5,00 6-1576 14,00 1,30
6-1484 13,00 1,58 6-1530 9,10 1,60 6-1577 736,60 5,00
6-1485 11,80 2,65 6-1531 9,10 1,65 6-1578 31,00 4,00
6-1486 42,00 1,00 6-1532 3,50 1,35 6-1579 16,50 1,50
6-1487 9,20 2,70 6-1533 28,00 4,00 6-1580 110,00 1,50
6-1488 5,00 1,90 6-1534 245,00 7,00 6-1581 6,07 1,30
6-1488 5,00 1,90 6-1535 47,00 2,62 6-1582 250,00 10,00
6-1489 50,20 3,00 6-1536 11,30 2,20 6-1583 350,00 10,00
6-1490 20,50 3,00 6-1537 14,20 1,90 6-1584 430,00 16,00
6-1491 10,10 1,60 6-1538 7,60 1,90 6-1585 59,20 5,70
6-1492 11,30 1,50 6-1539 8,55 1,75 6-1586 18,00 10,00
6-1493 16,50 2,00 6-1540 27,50 2,00 6-1587 52,00 1,00
6-1494 15,70 2,50 6-1541 15,50 1,50 6-1588 65,00 1,00
6-1495 1,45 1,75 6-1542 9,50 1,50 6-1589 38,00 1,00
O-Ring Guide
Parker Hannifin

6-1590 21,50 1,00 6-1638 20,95 2,62 6-1687 18,40 2,53
6-1591 129,00 1,50 6-1639 351,21 4,00 6-1688 18,60 2,29
6-1592 142,90 3,20 6-1640 10,00 4,00 6-1689 18,40 2,40
6-1593 165,10 3,20 6-1641 546,00 2,62 6-1690 18,60 2,53
6-1594 152,40 3,20 6-1642 7,60 2,10 6-1691 18,80 2,29
6-1595 12,10 2,35 6-1643 54,00 3,15 6-1692 18,80 2,40
6-1596 15,10 2,60 6-1644 110,00 3,50 6-1693 18,80 2,53
6-1597 18,20 2,68 6-1646 190,00 10,00 6-1694 4,30 2,40
6-1598 22,20 3,10 6-1647 7,30 1,00 6-1695 55,00 1,20
6-1599 28,30 3,10 6-1648 10,00 1,25 6-1696 145,00 2,88
6-1600 35,40 3,25 6-1649 46,00 1,50 6-1697 71,00 3,55
6-1601 42,40 4,25 6-1650 35,50 4,00 6-1698 29,00 2,00
6-1602 54,40 4,25 6-1651 112,00 2,50 6-1699 9,80 1,50
6-1603 14,10 2,50 6-1652 36,00 5,00 6-1700 17,00 2,50
6-1604 16,10 3,00 6-1653 198,00 3,00 6-1701 2,50 1,60
6-1605 156,00 4,00 6-1654 224,00 6,00 6-1702 160,00 5,30
6-1606 16,00 1,30 6-1655 26,50 4,00 6-1703 56,50 5,30
6-1607 67,00 4,00 6-1656 9,86 1,78 6-1704 69,20 5,30
6-1608 538,00 6,00 6-1657 53,50 2,00 6-1705 88,40 5,30
6-1609 74,60 3,53 6-1658 14,40 2,00 6-1706 180,00 5,30
6-1610 17,64 2,00 6-1659 171,45 3,20 6-1707 320,00 3,53
6-1611 23,47 2,40 6-1660 115,00 5,33 6-1708 98,00 2,50
6-1612 164,00 2,00 6-1661 64,00 4,00 6-1709 55,00 2,50
6-1613 27,00 1,40 6-1662 77,50 2,00 6-1710 23,00 1,60
6-1614 33,00 5,00 6-1663 294,00 3,00 6-1711 37,50 1,80
6-1615 0,83 1,63 6-1664 1,33 1,61 6-1712 38,00 2,65
6-1616 159,00 6,00 6-1665 94,00 5,70 6-1713 36,00 2,65
6-1617 34,00 5,00 6-1666 58,00 3,75 6-1714 8,40 1,50
6-1618 21,00 2,50 6-1667 278,99 2,62 6-1715 83,00 4,00
6-1619 19,00 4,00 6-1668 246,00 3,00 6-1716 635,00 10,00
6-1620 65,00 2,50 6-1669 37,25 2,62 6-1717 12,30 1,90
6-1621 14,00 4,00 6-1670 2,00 1,40 6-1718 11,00 1,90
6-1622 86,00 3,00 6-1671 110,00 6,00 6-1719 22,60 1,78
6-1623 20,00 3,15 6-1672 93,40 2,57 6-1720 102,40 5,70
6-1624 82,20 5,70 6-1673 95,00 3,00 6-1721 51,10 1,60
6-1625 154,60 1,78 6-1674 455,00 6,00 6-1722 21,10 1,60
6-1626 57,20 2,70 6-1675 79,50 2,65 6-1723 43,70 3,55
6-1627 30,00 1,00 6-1676 24,50 4,00 6-1724 44,96 2,57
6-1628 73,00 2,00 6-1677 3,80 1,50 6-1725 208,00 4,00
6-1629 88,00 5,00 6-1678 571,00 8,00 6-1726 60,00 2,00
6-1630 122,00 6,00 6-1679 223,00 2,65 6-1727 230,00 4,50
6-1631 34,00 2,50 6-1680 147,60 2,65 6-1728 5,50 0,80
6-1632 145,00 2,50 6-1681 2,20 0,80 6-1729 28,68 2,40
6-1633 47,00 3,00 6-1682 17,20 1,50 6-1730 9,30 2,20
6-1634 32,50 3,00 6-1683 6,10 1,60 6-1731 17,22 1,00
6-1635 11,80 1,80 6-1684 50,30 2,50 6-1732 6,30 2,00
Sizing charts
6-1636 13,00 1,80 6-1685 18,40 2,29 6-1733 10,70 1,90

6-1637 9,55 1,75 6-1686 18,40 2,40 6-1734 8,00 3,50
O-Ring Guide
Parker Hannifin

6-1735 0,70 0,50 6-1783 135,00 1,50 6-1831 640,00 2,62
6-1736 97,50 3,55 6-1784 329,57 4,80 6-1832 19,84 0,79
6-1737 9,70 2,50 6-1785 8,73 1,78 6-1833 7,40 2,62
6-1738 28,90 2,87 6-1786 365,00 5,30 6-1834 11,20 2,62
6-1739 2,80 1,50 6-1787 532,18 5,33 6-1835 14,50 1,40
6-1740 70,50 3,20 6-1788 890,00 5,33 6-1836 362,00 4,00
6-1741 56,87 1,78 6-1789 3000,00 5,33 6-1837 515,00 5,33
6-1742 690,00 8,00 6-1790 702,66 5,33 6-1838 532,18 5,33
6-1743 5,60 1,90 6-1791 2250,00 5,33 6-1839 34,00 4,00
6-1744 4,80 1,30 6-1792 1678,90 5,33 6-1840 745,00 10,00
6-1745 7,60 2,62 6-1793 1210,91 5,33 6-1841 618,50 2,00
6-1746 12,00 1,13 6-1794 623,08 5,33 6-1842 367,89 2,66
6-1747 15,30 1,50 6-1795 359,53 5,33 6-1843 455,00 5,33
6-1748 16,00 1,90 6-1796 425,35 5,33 6-1844 595,00 5,33
6-1749 9,96 1,53 6-1797 67,39 2,26 6-1845 2324,00 6,99
6-1750 75,65 2,70 6-1798 715,00 5,33 6-1846 2350,00 6,99
6-1751 6,10 1,60 6-1799 955,00 5,33 6-1847 736,00 7,00
6-1752 4,30 1,30 6-1800 2390,00 6,00 6-1848 190,00 1,78
6-1753 460,00 6,99 6-1801 1615,00 5,00 6-1849 205,00 1,78
6-1754 494,16 6,99 6-1802 1950,00 5,33 6-1850 94,40 3,10
6-1755 323,00 5,33 6-1803 151,39 2,57 6-1851 425,33 5,33
6-1756 374,00 5,33 6-1804 83,77 1,78 6-1852 955,00 7,00
6-1757 455,00 5,33 6-1805 35,96 2,32 6-1853 639,00 4,00
6-1758 511,00 5,33 6-1806 20,20 1,81 6-1854 48,00 1,00
6-1759 595,00 5,33 6-1807 136,53 1,78 6-1855 9,70 5,33
6-1760 874,00 5,33 6-1808 35,95 1,78 6-1856 11,82 2,62
6-1761 975,00 5,33 6-1809 14,23 1,60 6-1857 14,90 2,70
6-1762 2330,00 10,00 6-1810 4,32 0,92 6-1858 602,00 7,00
6-1763 2500,00 10,00 6-1811 545,00 7,00 6-1859 640,00 7,00
6-1764 4,40 0,80 6-1812 582,68 7,00 6-1860 259,20 3,53
6-1765 17,00 1,93 6-1813 14,47 3,53 6-1861 245,00 3,53
6-1766 14,50 1,50 6-1814 2,95 0,97 6-1862 27,50 1,00
6-1767 230,00 4,80 6-1815 163,07 1,63 6-1863 6,00 1,20
6-1768 24,50 5,50 6-1816 183,00 1,78 6-1864 59,50 5,00
6-1769 31,50 7,00 6-1817 14,20 3,00 6-1865 164,33 2,62
6-1770 15,50 4,00 6-1818 21,20 3,60 6-1866 206,00 5,70
6-1771 74,50 3,00 6-1819 17,20 4,00 6-1867 215,00 5,00
6-1772 19,50 4,00 6-1820 32,97 4,02 6-1868 270,00 6,00
6-1773 153,50 3,20 6-1821 715,00 5,33 6-1869 19,50 2,66
6-1774 148,60 3,20 6-1822 13,00 2,62 6-1870 83,00 2,00
6-1775 131,10 3,20 6-1823 522,00 10,00 6-1871 20,90 3,00
6-1776 86,00 3,20 6-1824 623,08 5,33 6-1872 13,50 3,00
6-1777 90,80 3,50 6-1825 13,30 1,80 6-1873 11,50 3,00
6-1778 70,00 3,50 6-1826 114,55 2,57 6-1874 15,50 1,90
6-1779 87,60 3,00 6-1827 13,30 2,80 6-1875 21,50 1,60
6-1780 33,00 1,50 6-1828 14,60 2,10 6-1876 67,00 2,80
6-1781 95,00 1,50 6-1829 508,00 5,33 6-1877 11,00 2,30
6-1782 90,00 1,50 6-1830 552,00 5,33 6-1878 6,80 3,10
O-Ring Guide
Parker Hannifin

6-1879 8,15 1,83 6-1927 65,00 5,50 6-1975 19,30 2,20
6-1880 313,00 5,33 6-1928 75,00 5,50 6-1976 177,00 3,00
6-1881 340,00 5,33 6-1929 168,40 6,00 6-1977 8,50 3,00
6-1882 1029,00 8,30 6-1930 23,40 4,00 6-1978 11,80 3,00
6-1883 2,00 1,50 6-1931 49,50 5,00 6-1979 484,00 8,40
6-1884 15,50 1,78 6-1932 197,00 6,00 6-1980 36,00 4,00
6-1885 22,00 2,30 6-1933 133,00 3,00 6-1981 50,00 1,50
6-1886 7,10 1,84 6-1934 469,00 5,33 6-1982 3,20 1,78
6-1887 28,57 1,52 6-1935 10,00 1,10 6-1983 4,76 1,78
6-1888 355,00 8,00 6-1936 13,30 2,20 6-1984 51,63 1,78
6-1889 74,90 1,78 6-1937 428,00 5,00 6-1985 58,00 2,50
6-1890 34,00 1,10 6-1938 2,80 1,50 6-1986 2,24 2,62
6-1891 92,00 1,40 6-1939 5,70 2,62 6-1987 30,00 2,62
6-1892 5,96 1,70 6-1940 66,00 5,33 6-1988 132,70 2,62
6-1893 9,11 2,00 6-1941 82,00 5,33 6-1989 221,60 2,62
6-1894 62,00 2,40 6-1942 126,30 5,33 6-1990 125,00 3,50
6-1895 239,20 3,53 6-1943 818,00 12,00 6-1991 52,39 3,53
6-1896 226,20 3,53 6-1944 777,00 12,00 6-1992 68,00 3,53
6-1897 45,00 6,00 6-1945 224,00 7,00 6-1993 250,00 4,00
6-1898 7,65 1,81 6-1946 28,77 2,40 6-1994 16,82 5,33
6-1899 10,20 2,35 6-1947 334,00 2,62 6-1995 30,00 5,33
6-1900 14,00 2,38 6-1948 230,00 5,00 6-1996 204,00 5,33
6-1901 18,80 2,70 6-1949 137,50 3,30 6-1997 214,00 5,33
6-1902 14,50 2,00 6-1950 77,80 1,50 6-1998 650,00 5,33
6-1903 43,00 3,50 6-1951 764,00 7,00 6-1999 113,00 7,00
6-1904 90,00 5,50 6-1952 555,00 3,00 6-2000 135,50 6,00
6-1905 100,00 5,50 6-1953 589,00 3,00 6-2001 58,00 3,55
6-1906 30,00 3,50 6-1954 22,50 2,50 6-2002 520,00 3,00
6-1907 45,00 3,50 6-1955 24,50 2,50 6-2003 532,00 3,00
6-1908 68,00 5,50 6-1956 786,00 4,00 6-2004 4,20 1,00
6-1909 72,00 5,50 6-1957 522,00 4,00 6-2005 276,00 2,62
6-1910 95,00 5,50 6-1958 372,00 4,00 6-2006 553,00 5,33
6-1911 23,00 2,62 6-1959 645,00 4,00 6-2007 36,50 2,00
6-1912 40,00 3,50 6-1960 645,00 3,53 6-2008 45,30 1,93
6-1913 47,00 5,00 6-1961 17,30 2,20 6-2009 855,00 10,00
6-1914 53,00 4,00 6-1962 128,00 4,00 6-2010 55,30 5,70
6-1915 28,00 3,50 6-1963 587,00 7,00 6-2011 20,00 9,00
6-1916 75,00 4,50 6-1964 560,00 7,00 6-2012 74,00 2,50
6-1917 70,00 5,50 6-1965 8,70 2,00 6-2013 335,00 5,00
6-1918 349,00 5,33 6-1966 69,00 4,50 6-2014 105,00 2,62
6-1919 27,00 2,80 6-1967 13,00 1,20 6-2015 470,00 4,50
6-1920 32,00 3,50 6-1968 1590,00 6,99 6-2016 58,00 3,55
6-1921 23,00 2,60 6-1969 1,50 0,25 6-2017 99,39 3,30
6-1922 11,30 4,75 6-1970 60,00 1,50 6-2018 43,00 5,00
6-1923 14,20 2,00 6-1971 9,20 2,20 6-2019 58,00 3,55
6-1924 3,30 1,78 6-1972 79,00 2,00 6-2020 38,00 4,00
Sizing charts
6-1925 4,09 1,78 6-1973 100,00 1,00 6-2021 148,00 2,50

6-1926 35,00 3,50 6-1974 66,00 1,50 6-2022 150,00 2,50
O-Ring Guide
Parker Hannifin

6-2023 598,00 7,00 6-2069 12,30 3,50
6-2024 142,00 3,00 6-2070 14,60 2,95
6-2025 628,50 7,00 6-2071 11,00 3,50
6-2026 669,30 7,00 6-2072 81,97 3,53
6-2027 103,00 3,00 6-2073 492,00 3,53
6-2028 88,00 5,30
6-2029 6,50 1,00
6-2030 89,00 1,50
6-2031 547,00 7,00
6-2032 6,40 2,62
6-2033 78,00 1,50
6-2034 10,24 1,83
6-2035 12,20 2,00
6-2036 109,50 5,33
6-2037 297,80 6,99
6-2038 16,00 3,50
6-2039 22,22 2,62
6-2040 26,00 3,50
6-2041 4,45 3,53
6-2042 801,00 4,00
6-2043 14,00 5,00
6-2044 18,00 3,50
6-2045 63,00 3,00
6-2046 130,00 5,80
6-2047 34,50 2,65
6-2048 32,00 1,00
6-2049 41,00 2,00
6-2050 58,00 2,50
6-2051 212,00 5,30
6-2052 48,00 2,30
6-2053 6,00 2,10
6-2054 36,60 2,90
6-2055 20,80 2,00
6-2056 7,67 1,78
6-2057 9,27 1,78
6-2058 12,47 1,78
6-2059 19,24 1,78
6-2060 22,48 1,78
6-2061 23,65 1,78
6-2062 30,10 1,78
6-2063 37,98 1,78
6-2064 121,00 8,00
6-2065 510,00 3,00
6-2066 820,00 3,00
6-2067 750,00 3,00
6-2068 17,10 1,60
O-Ring Guide
Parker Hannifin
Sizing charts – O-Ring sizes acc. to cross section d

6-1735 0,70 0,50 6-1557 2,97 1,03 2-106 4,42 2,62
2-001 0,74 1,02 6-018 3,00 1,00 6-2041 4,45 3,53
6-408 0,80 1,60 6-549 3,00 1,20 5-108 4,47 1,27
6-1615 0,83 1,63 6-441 3,00 1,50 2-008 4,47 1,78
6-1358 0,90 0,53 6-615 3,00 2,00 6-401 4,50 1,00
6-1410 1,00 0,63 6-1120 3,00 2,70 6-214 4,50 1,50
6-906 1,00 1,00 5-683 3,10 1,60 6-1291 4,50 2,25
2-002 1,07 1,27 6-1479 3,15 1,50 6-1036 4,60 2,00
2-102 1,24 2,62 6-736 3,17 1,02 6-133 4,70 1,90
6-1664 1,33 1,61 6-684 3,20 1,02 6-1983 4,76 1,78
2-003 1,42 1,52 6-686 3,20 1,60 6-849 4,80 0,75
6-1506 1,42 1,58 6-1982 3,20 1,78 6-1744 4,80 1,30
6-1495 1,45 1,75 6-1924 3,30 1,78 5-581 4,90 1,90
6-1969 1,50 0,25 6-361 3,30 2,40 6-1026 5,00 1,00
6-1269 1,50 0,60 6-307 3,33 1,02 6-583 5,00 1,20
6-369 1,50 1,00 5-190 3,35 1,78 6-069 5,00 1,50
6-1247 1,53 0,97 6-1645 3,40 1,50 6-1434 5,00 1,60
5-051 1,78 1,02 5-579 3,40 1,90 6-955 5,00 1,75
2-004 1,78 1,78 6-685 3,40 2,00 6-1488 5,00 1,90
6-714 1,80 1,00 6-973 3,50 0,80 6-110 5,00 2,00
6-418 1,85 1,50 6-491 3,50 1,10 6-1035 5,00 2,50
6-364 1,98 0,84 6-021 3,50 1,20 6-1394 5,15 1,80
6-797 2,00 1,00 6-402 3,50 1,25 2-107 5,23 2,62
6-1670 2,00 1,40 6-1532 3,50 1,35 2-009 5,28 1,78
6-1883 2,00 1,50 6-468 3,50 1,50 6-751 5,30 2,40
6-925 2,06 0,66 2-105 3,63 2,62 6-738 5,33 1,02
2-103 2,06 2,62 2-007 3,68 1,78 6-063 5,35 1,50
6-1681 2,20 0,80 6-251 3,70 1,90 6-1501 5,46 0,89
6-1264 2,20 1,00 6-1677 3,80 1,50 6-1728 5,50 0,80
6-306 2,20 1,60 6-1568 3,80 1,90 6-968 5,50 1,50
6-1986 2,24 2,62 6-166 3,90 1,80 6-950 5,50 2,00
6-880 2,30 1,30 6-1496 3,90 1,80 6-1385 5,60 1,80
6-1019 2,35 1,00 6-1363 3,90 2,40 6-1743 5,60 1,90
6-538 2,40 1,90 6-613 4,00 1,00 6-338 5,60 2,40
6-966 2,50 1,00 6-019 4,00 1,10 6-960 5,61 1,68
6-167 2,50 1,20 6-035 4,00 1,50 6-1102 5,69 1,14
6-138 2,50 1,30 6-1287 4,00 1,80 6-748 5,70 1,05
6-1701 2,50 1,60 6-104 4,00 2,00 5-582 5,70 1,90
6-168 2,50 1,70 6-420 4,00 2,20 6-1939 5,70 2,62
2-005 2,57 1,78 6-428 4,00 2,50 6-548 5,70 3,20
5-578 2,60 1,90 6-994 4,00 3,00 6-861 5,80 0,75
6-020 2,70 1,50 6-1405 4,05 1,77 2-202 5,94 3,53
6-1739 2,80 1,50 6-1925 4,09 1,78 6-1892 5,96 1,70
6-1938 2,80 1,50 6-2004 4,20 1,00 6-543 6,00 1,00
6-1033 2,80 1,60 5-580 4,20 1,90 6-1863 6,00 1,20
2-104 2,84 2,62 6-1752 4,30 1,30 6-713 6,00 1,25
6-487 2,90 1,02 6-1694 4,30 2,40 6-038 6,00 1,50
2-006 2,90 1,78 6-1810 4,32 0,92 6-1312 6,00 1,52
6-1814 2,95 0,97 2-201 4,34 3,53 6-1471 6,00 1,80
6-1544 2,96 1,04 6-1764 4,40 0,80 6-001 6,00 2,00
Sizing charts
For articles printed in bold, fitting Parker Parbak® back-up rings are available from stock.
O-Ring Guide
Parker Hannifin

6-2053 6,00 2,10 6-1527 7,40 3,70 6-1965 8,70 2,00
6-1327 6,00 2,50 6-1833 7,40 2,62 6-1785 8,73 1,78
6-079 6,00 5,00 6-710 7,50 1,00 5-612 8,74 1,78
6-652 6,00 5,20 6-661 7,50 1,25 6-277 8,79 1,14
2-108 6,02 2,62 6-091 7,50 1,50 6-715 8,80 1,00
6-1581 6,07 1,30 6-1519 7,50 1,50 5-586 8,90 1,90
3-902 6,07 1,63 6-856 7,50 1,80 5-587 8,90 2,70
2-010 6,07 1,78 6-432 7,50 2,00 3-904 8,92 1,83
6-1683 6,10 1,60 6-1183 7,50 2,10 6-610 9,00 1,20
6-1751 6,10 1,60 6-134 7,50 2,50 6-010 9,00 1,50
6-344 6,20 1,50 6-1570 7,50 3,00 6-120 9,00 1,80
6-374 6,30 1,60 6-1500 7,52 3,51 6-470 9,00 2,00
6-855 6,30 1,80 2-203 7,52 3,53 6-161 9,00 2,50
6-1732 6,30 2,00 2-109 7,59 2,62 5-700 9,00 3,00
5-686 6,30 2,39 6-1538 7,60 1,90 6-1122 9,00 3,00
6-1268 6,30 2,40 6-1642 7,60 2,10 6-651 9,00 4,00
6-1251 6,36 0,72 6-1745 7,60 2,62 6-1530 9,10 1,60
6-933 6,40 1,30 3-903 7,65 1,63 6-1531 9,10 1,65
5-583 6,40 1,90 2-011 7,65 1,78 6-1893 9,11 2,00
6-2032 6,40 2,62 6-1898 7,65 1,81 2-204 9,12 3,53
6-2029 6,50 1,00 6-2056 7,67 1,78 2-110 9,19 2,62
6-1149 6,50 1,20 6-1422 7,65 2,00 5-716 9,19 3,00
6-581 6,50 1,50 6-1032 7,70 2,00 6-1971 9,20 2,20
6-572 6,50 2,00 5-673 7,75 1,88 6-1487 9,20 2,70
6-480 6,60 1,50 6-317 7,80 3,60 2-012 9,25 1,78
6-1022 6,75 1,78 6-486 7,80 4,60 6-2057 9,27 1,78
6-907 6,80 1,80 6-437 8,00 1,00 6-866 9,30 1,50
6-440 6,80 2,00 6-592 8,00 1,25 6-1730 9,30 2,20
6-1878 6,80 3,10 6-658 8,00 1,40 6-012 9,30 2,40
5-052 6,86 1,78 6-074 8,00 1,50 6-395 9,35 1,60
6-657 7,00 1,00 6-1562 8,00 1,60 6-346 9,40 2,10
6-959 7,00 1,20 5-585 8,00 1,88 6-952 9,50 1,00
6-922 7,00 1,40 6-002 8,00 2,00 6-1542 9,50 1,50
6-1558 7,00 1,47 6-520 8,00 2,20 6-1314 9,50 1,78
6-011 7,00 1,50 6-564 8,00 2,50 6-1407 9,50 1,80
6-311 7,00 2,00 6-390 8,00 3,00 6-1297 9,50 2,00
6-937 7,00 2,35 6-1734 8,00 3,50 6-1511 9,50 2,15
6-028 7,00 2,50 6-192 8,10 1,60 6-1206 9,50 2,50
6-1400 7,00 2,75 6-1416 8,10 2,00 6-1133 9,52 1,78
6-080 7,00 3,00 5-664 8,13 1,78 6-373 9,53 1,60
6-1523 7,10 1,37 6-1879 8,15 1,83 6-1440 9,55 1,75
6-052 7,10 1,60 6-345 8,20 1,50 6-1637 9,55 1,75
6-1886 7,10 1,84 6-070 8,30 2,40 6-1499 9,60 2,00
6-956 7,10 2,00 6-1714 8,40 1,50 5-212 9,75 1,78
6-1321 7,10 3,60 6-692 8,50 1,50 6-1737 9,70 2,50
5-584 7,20 1,90 6-1228 8,50 2,00 6-1855 9,70 5,33
6-1647 7,30 1,00 6-1977 8,50 3,00 6-1502 9,78 1,27
6-1266 7,30 2,40 6-1539 8,55 1,75 6-1699 9,80 1,50
6-162 7,30 2,70 6-1481 8,56 1,07 6-1656 9,86 1,78
6-1249 7,30 3,40 6-1286 8,65 2,80 5-614 9,93 2,62
O-Ring Guide
Parker Hannifin

6-1749 9,96 1,53 6-1386 11,00 3,40 6-058 12,30 2,40
6-1514 10,00 0,50 6-2071 11,00 3,50 6-2069 12,30 3,50
6-1935 10,00 1,10 6-1525 11,10 1,60 2-112 12,37 2,62
6-116 10,00 1,00 5-613 11,10 1,78 2-014 12,42 1,78
6-1518 10,00 1,20 6-1337 11,10 1,82 6-2058 12,47 1,78
6-1648 10,00 1,25 6-1510 11,10 2,15 6-550 12,50 1,10
6-083 10,00 1,50 6-1376 11,20 1,80 6-1567 12,50 1,50
6-1216 10,00 1,60 6-1834 11,20 2,62 6-1379 12,50 1,80
6-003 10,00 2,00 6-1492 11,30 1,50 6-198 12,50 2,00
6-532 10,00 2,20 6-1536 11,30 2,20 6-1503 12,83 1,27
6-105 10,00 2,50 6-471 11,30 2,40 6-584 13,00 1,00
6-910 10,00 2,62 6-1922 11,30 4,75 6-904 13,00 1,30
6-823 10,00 2,65 6-347 11,40 2,10 6-1526 13,00 1,30
6-605 10,00 3,00 6-677 11,50 1,00 6-033 13,00 1,50
6-1640 10,00 4,00 6-928 11,50 1,50 6-1484 13,00 1,58
6-931 10,00 6,50 6-1575 11,50 1,78 6-1636 13,00 1,80
6-1449 10,00 8,00 6-1498 11,50 1,80 6-075 13,00 2,00
6-627 10,10 1,00 6-1313 11,50 2,00 6-016 13,00 2,50
6-1491 10,10 1,60 6-1454 11,50 2,30 6-1967 13,00 1,20
6-839 10,10 1,78 6-945 11,50 2,50 6-1822 13,00 2,62
6-571 10,15 1,40 6-1873 11,50 3,00 6-730 13,00 3,00
6-1460 10,20 1,50 6-1323 11,60 1,20 6-207 13,00 3,50
6-1561 10,20 1,80 6-1275 11,60 2,20 6-163 13,10 1,60
6-1899 10,20 2,35 6-1468 11,75 1,55 5-616 13,11 2,62
6-2034 10,24 1,83 6-1397 11,60 2,70 6-129 13,23 1,78
6-375 10,25 1,40 6-1635 11,80 1,80 6-1198 13,30 1,20
6-475 10,30 2,40 6-1485 11,80 2,65 6-1825 13,30 1,80
6-965 10,40 1,00 6-1978 11,80 3,00 6-1936 13,30 2,20
2-309 10,46 5,33 6-1856 11,82 2,62 6-929 13,30 2,40
6-976 10,50 1,50 6-366 11,89 1,78 6-1827 13,30 2,80
5-588 10,50 2,70 3-906 11,89 1,98 6-1202 13,30 3,00
3-905 10,52 1,83 5-615 11,91 2,62 6-348 13,40 2,10
6-777 10,60 1,80 6-438 12,00 1,00 3-907 13,46 2,08
6-218 10,60 2,00 6-1746 12,00 1,13 6-1571 13,50 1,50
2-205 10,69 3,53 6-1566 12,00 1,20 6-096 13,50 2,75
6-1733 10,70 1,90 6-1466 12,00 1,30 6-1872 13,50 3,00
2-111 10,77 2,62 6-1469 12,00 1,40 5-590 13,59 2,69
6-1505 10,78 2,62 6-053 12,00 1,50 6-1504 13,59 2,69
6-551 10,80 1,50 6-065 12,00 2,00 6-473 13,60 2,50
6-1230 10,80 1,90 6-774 12,00 2,50 2-311 13,64 5,33
2-013 10,82 1,78 6-124 12,00 3,00 6-1339 13,70 2,50
6-1208 10,90 1,20 6-662 12,00 3,80 6-160 13,75 2,80
6-1236 11,00 1,00 6-1330 12,00 10,60 2-207 13,87 3,53
6-084 11,00 1,50 2-310 12,07 5,33 6-737 13,89 1,30
6-1516 11,00 1,60 6-1361 12,10 1,60 2-113 13,94 2,62
6-1718 11,00 1,90 5-589 12,10 2,70 6-1288 14,00 1,00
6-086 11,00 2,00 6-1595 12,10 2,35 6-1049 14,00 1,10
6-1877 11,00 2,30 6-2035 12,20 2,00 6-1576 14,00 1,30
6-717 11,00 2,50 2-206 12,29 3,53 6-143 14,00 1,50
6-953 11,00 3,00 6-1717 12,30 1,90 6-1345 14,00 1,60
Sizing charts
O-Ring Guide
Parker Hannifin

2-015 14,00 1,78 5-676 15,49 1,47 2-017 17,17 1,78
6-1342 14,00 1,82 6-1541 15,50 1,50 6-1682 17,20 1,50
6-090 14,00 2,00 6-1884 15,50 1,78 6-1341 17,20 1,82
6-1555 14,00 2,20 6-1874 15,50 1,90 6-1109 17,20 3,00
6-1900 14,00 2,38 6-1340 15,50 2,60 6-1819 17,20 4,00
6-067 14,00 2,50 6-1770 15,50 4,00 6-1731 17,22 1,00
6-705 14,00 3,00 2-114 15,54 2,62 6-1569 17,30 2,20
6-1621 14,00 4,00 2-016 15,60 1,78 6-1961 17,30 2,20
6-2043 14,00 5,00 6-1494 15,70 2,50 5-690 17,30 2,40
6-1603 14,10 2,50 6-223 15,80 2,40 6-554 17,40 2,10
6-1537 14,20 1,90 5-617 15,88 2,62 6-388 17,40 2,50
6-1923 14,20 2,00 6-439 16,00 1,00 6-1364 17,50 4,00
6-1817 14,20 3,00 6-632 16,00 1,25 6-1610 17,64 2,00
6-1809 14,23 1,60 6-1606 16,00 1,30 6-1480 17,70 1,78
6-135 14,30 2,40 6-528 16,00 1,50 6-367 17,81 1,02
6-1658 14,40 2,00 6-857 16,00 1,80 6-1298 17,86 2,62
5-239 14,48 2,69 6-1748 16,00 1,90 6-041 17,90 1,25
6-1813 14,47 3,53 6-146 16,00 2,00 5-256 17,96 2,62
6-1835 14,50 1,40 6-562 16,00 2,50 6-258 17,96 2,62
6-1766 14,50 1,50 6-891 16,00 2,65 6-731 18,00 1,30
6-397 14,50 1,60 6-042 16,00 3,00 6-087 18,00 1,50
6-1902 14,50 2,00 6-2038 16,00 3,50 6-076 18,00 2,00
6-1828 14,60 2,10 6-1021 16,00 4,00 6-1040 18,00 2,20
6-1464 14,50 3,00 6-1432 16,00 6,00 6-132 18,00 2,50
6-340 14,60 2,40 6-1604 16,10 3,00 6-425 18,00 3,00
6-2070 14,60 2,95 6-1524 16,30 1,40 6-007 18,00 3,15
6-1393 14,70 3,50 6-1039 16,30 2,40 6-2044 18,00 3,50
6-1857 14,90 2,70 3-908 16,36 2,21 6-125 18,00 4,00
6-683 15,00 1,00 6-876 16,50 1,00 6-755 18,00 5,00
6-118 15,00 1,50 6-1579 16,50 1,50 6-1586 18,00 10,00
6-040 15,00 1,60 6-1493 16,50 2,00 6-848 18,14 1,78
6-085 15,00 1,80 6-313 16,50 2,70 6-1597 18,20 2,68
6-005 15,00 2,00 5-643 16,51 1,14 6-396 18,20 3,00
6-106 15,00 2,50 6-725 16,56 1,78 6-1549 18,20 2,60
6-043 15,00 3,00 6-297 16,58 1,50 6-177 18,30 2,40
6-072 15,00 3,20 6-006 16,70 1,45 5-594 18,30 3,60
6-1398 15,00 3,50 2-313 16,81 5,33 6-1685 18,40 2,29
6-1099 15,00 4,00 6-1994 16,82 5,33 6-1686 18,40 2,40
6-128 15,00 5,00 5-592 16,90 2,70 6-1689 18,40 2,40
6-1396 15,08 2,62 6-524 17,00 1,10 6-1687 18,40 2,53
6-1548 15,10 2,60 6-476 17,00 1,50 5-593 18,40 2,70
6-1596 15,10 2,60 6-1765 17,00 1,93 2-314 18,42 5,33
5-591 15,10 2,70 6-044 17,00 2,00 6-308 18,50 1,50
2-312 15,24 5,33 6-1700 17,00 2,50 6-499 18,60 2,00
6-1747 15,30 1,50 6-946 17,00 3,00 6-1688 18,60 2,29
6-940 15,30 2,20 6-974 17,00 3,50 6-1690 18,60 2,53
6-206 15,30 2,40 6-1365 17,00 4,00 6-557 18,60 3,50
5-243 15,34 2,62 2-209 17,04 3,53 2-210 18,64 3,53
6-349 15,40 2,10 6-2068 17,10 1,60 2-116 18,72 2,62
2-208 15,47 3,53 2-115 17,12 2,62 2-018 18,77 1,78
O-Ring Guide
Parker Hannifin

6-1543 18,80 1,90 6-212 20,34 4,25 6-1954 22,50 2,50
6-1691 18,80 2,29 2-019 20,35 1,78 6-1719 22,60 1,78
6-1692 18,80 2,40 6-1465 20,50 2,00 6-263 22,70 1,50
6-1693 18,80 2,53 6-1490 20,50 3,00 6-287 22,89 1,00
6-1901 18,80 2,70 6-2055 20,80 2,00 6-1078 23,00 1,50
6-295 19,00 0,80 6-1871 20,90 3,00 6-1710 23,00 1,60
6-1276 19,00 1,00 6-1638 20,95 2,62 6-999 23,00 2,00
6-573 19,00 1,50 6-1353 21,00 1,00 6-066 23,00 2,50
6-798 19,00 1,80 6-1470 21,00 1,50 6-1921 23,00 2,60
6-360 19,00 2,00 6-008 21,00 2,00 6-1911 23,00 2,62
6-1574 19,00 2,42 6-1618 21,00 2,50 6-1112 23,00 3,00
6-039 19,00 2,50 6-1311 21,00 3,00 5-597 23,00 3,60
6-779 19,00 2,65 6-089 21,00 3,50 6-1431 23,00 4,00
6-998 19,00 3,00 6-1252 21,00 4,00 6-1433 23,00 6,00
6-1619 19,00 4,00 6-489 21,00 6,00 2-317 23,16 5,33
6-404 19,00 5,00 6-1722 21,10 1,60 2-213 23,39 3,53
3-910 19,18 2,46 6-1375 21,20 1,80 6-1930 23,40 4,00
6-593 19,20 3,00 6-430 21,20 2,40 6-1611 23,47 2,40
6-2059 19,24 1,78 6-780 21,20 2,65 2-119 23,47 2,62
6-1975 19,30 2,20 6-801 21,20 3,55 3-912 23,47 2,95
6-503 19,30 2,40 6-1818 21,20 3,60 2-021 23,52 1,78
6-628 19,30 3,65 6-1446 21,30 2,30 6-298 23,60 1,02
6-1430 19,35 1,00 5-596 21,30 3,60 6-942 23,60 2,90
6-350 19,40 2,10 6-1590 21,50 1,00 6-2061 23,65 1,78
6-119 19,50 1,50 6-687 21,50 1,50 6-351 23,70 2,80
6-1869 19,50 2,66 6-1875 21,50 1,60 6-1338 23,80 2,40
6-1463 19,50 3,50 6-343 21,50 1,78 6-666 24,00 1,00
6-1772 19,50 4,00 2-316 21,59 5,33 6-544 24,00 1,50
6-758 19,75 2,50 6-285 21,70 0,73 6-022 24,00 2,00
6-300 19,80 2,40 2-212 21,82 3,53 6-595 24,00 2,50
5-595 19,80 3,60 2-118 21,89 2,62 6-1027 24,00 3,00
6-1832 19,84 0,79 3-911 21,92 2,95 6-453 24,00 4,00
2-315 19,99 5,33 2-020 21,95 1,78 6-443 24,00 6,00
6-099 20,00 1,30 6-1115 22,00 1,30 6-050 24,20 3,00
6-078 20,00 1,50 6-493 22,00 1,39 6-288 24,32 1,00
6-793 20,00 1,80 6-088 22,00 1,50 6-1545 24,50 1,00
6-619 20,00 2,00 6-139 22,00 2,00 6-1955 24,50 2,50
6-017 20,00 2,50 6-1315 22,00 2,10 6-1289 24,50 3,15
6-1373 20,00 2,65 6-1885 22,00 2,30 6-1676 24,50 4,00
6-130 20,00 3,00 6-036 22,00 2,50 6-1768 24,50 5,50
6-1623 20,00 3,15 6-1083 22,00 3,00 6-1456 24,60 3,40
6-808 20,00 3,55 6-877 22,00 4,00 5-598 24,60 3,60
6-958 20,00 4,00 6-356 22,10 1,60 6-1204 24,69 1,78
6-1091 20,00 5,00 6-1064 22,20 3,00 2-318 24,77 5,33
6-2011 20,00 9,00 6-1550 22,20 3,10 6-092 24,80 1,50
6-1806 20,20 1,81 6-1598 22,20 3,10 2-214 24,99 3,53
6-382 20,20 3,00 6-2039 22,22 2,62 6-611 25,00 1,50
2-211 20,22 3,53 6-1086 22,30 2,40 6-442 25,00 2,00
2-117 20,29 2,62 6-1459 22,42 1,78 6-916 25,00 2,50
6-275 20,30 2,40 6-2060 22,48 1,78 6-969 25,00 3,00
Sizing charts
O-Ring Guide
Parker Hannifin

6-426 25,00 4,00 6-781 28,00 2,65 6-314 31,02 3,00
6-376 25,00 5,00 6-977 28,00 3,00 2-322 31,12 5,33
3-913 25,04 2,95 6-1915 28,00 3,50 2-218 31,34 3,53
2-120 25,07 2,62 6-1533 28,00 4,00 2-124 31,42 2,62
2-022 25,12 1,78 6-1031 28,00 5,00 2-026 31,47 1,78
6-126 25,30 1,60 2-216 28,17 3,53 6-1146 31,50 3,15
6-745 25,30 2,40 6-1378 28,20 1,00 6-1769 31,50 7,00
6-189 25,50 2,00 2-122 28,24 2,62 6-1461 31,57 1,98
6-957 25,60 1,93 2-024 28,30 1,78 6-766 31,70 3,50
6-289 25,79 1,00 6-1551 28,30 3,10 6-760 31,95 2,60
6-387 25,80 3,30 6-1599 28,30 3,10 6-2048 32,00 1,00
5-618 25,81 3,53 6-1887 28,57 1,52 6-1512 32,00 1,50
6-728 26,00 1,00 6-1729 28,68 2,40 6-1556 32,00 1,50
6-1232 26,00 1,50 6-1946 28,77 2,40 6-869 32,00 2,00
6-656 26,00 2,00 6-1738 28,90 2,87 6-850 32,00 2,50
6-749 26,00 2,50 6-1698 29,00 2,00 6-646 32,00 2,70
6-1082 26,00 3,00 6-1423 29,00 2,50 6-1920 32,00 3,50
6-2040 26,00 3,50 6-1000 29,00 3,00 6-838 32,00 4,00
6-1259 26,00 4,00 6-1517 29,10 1,60 6-1634 32,50 3,00
5-599 26,20 3,60 5-601 29,30 3,60 6-784 32,50 3,55
2-319 26,34 5,33 6-034 29,50 1,50 5-603 32,50 3,60
6-1655 26,50 4,00 2-321 29,51 5,33 2-323 32,69 5,33
2-215 26,57 3,53 6-352 29,70 2,80 2-219 32,92 3,53
3-914 26,59 2,95 3-916 29,74 2,95 6-1820 32,97 4,02
2-121 26,64 2,62 2-217 29,74 3,53 2-125 32,99 2,62
2-023 26,70 1,78 2-123 29,82 2,62 6-1780 33,00 1,50
6-208 26,70 2,50 2-025 29,87 1,78 6-136 33,00 2,00
6-1613 27,00 1,40 6-1627 30,00 1,00 6-540 33,00 2,50
6-400 27,00 1,50 6-048 30,00 2,00 6-1138 33,00 3,00
6-049 27,00 2,00 6-1203 30,00 2,15 6-1411 33,00 3,50
6-894 27,00 2,50 6-1474 30,00 2,25 6-1614 33,00 5,00
6-1447 27,00 2,70 6-156 30,00 2,50 2-027 33,05 1,78
6-1919 27,00 2,80 6-1987 30,00 2,62 6-472 33,30 2,40
6-147 27,00 3,00 6-056 30,00 3,00 6-802 33,50 2,65
6-825 27,00 3,20 6-037 30,00 3,15 5-157 33,99 2,34
6-660 27,00 5,00 6-1906 30,00 3,50 6-1047 34,00 1,00
6-913 27,20 3,00 6-803 30,00 3,55 6-1890 34,00 1,10
6-023 27,30 2,40 6-454 30,00 4,00 6-1197 34,00 2,00
6-1862 27,50 1,00 6-663 30,00 4,65 6-1631 34,00 2,50
6-497 27,50 1,50 6-1366 30,00 5,00 6-622 34,00 2,80
6-1540 27,50 2,00 6-1995 30,00 5,33 6-914 34,00 3,00
6-296 27,71 1,02 6-2062 30,10 1,78 6-1839 34,00 4,00
5-600 27,80 3,60 6-290 30,30 2,40 6-1617 34,00 5,00
2-320 27,94 5,33 6-142 30,70 2,00 5-604 34,10 3,60
6-905 28,00 1,00 5-602 30,80 3,60 2-324 34,29 5,33
6-101 28,00 1,50 6-1478 31,00 1,50 6-1150 34,40 2,10
6-794 28,00 1,80 6-1401 31,00 2,00 6-585 34,40 3,10
6-140 28,00 2,00 6-324 31,00 2,50 3-918 34,42 2,95
6-180 28,00 2,20 6-1578 31,00 4,00 6-2047 34,50 2,65
6-654 28,00 2,50 6-097 31,00 4,50 2-220 34,52 3,53
O-Ring Guide
Parker Hannifin

2-126 34,59 2,62 2-222 37,69 3,53 6-1486 42,00 1,00
2-028 34,65 1,78 2-128 37,77 2,62 6-015 42,00 1,50
6-752 34,65 2,60 2-029 37,82 1,78 6-594 42,00 2,50
6-1100 35,00 1,50 6-2063 37,98 1,78 6-227 42,00 3,00
6-047 35,00 2,00 6-1589 38,00 1,00 6-1319 42,00 4,00
6-606 35,00 2,50 6-1389 38,00 1,50 6-1399 42,00 4,50
6-1116 35,00 3,00 6-046 38,00 2,00 6-1224 42,00 5,00
6-993 35,00 3,20 6-433 38,00 2,50 6-1601 42,40 4,25
6-1926 35,00 3,50 6-1712 38,00 2,65 6-845 42,50 1,80
6-1166 35,00 4,00 6-1092 38,00 3,00 2-131 42,52 2,62
6-545 35,00 4,50 6-1025 38,00 3,50 5-330 42,52 5,33
6-1414 35,00 5,00 6-2020 38,00 4,00 5-332 42,85 3,53
6-377 35,00 5,30 6-221 38,00 5,00 6-1189 43,00 2,00
6-1124 35,15 3,15 6-1412 38,00 5,00 6-996 43,00 3,00
6-1600 35,40 3,25 6-782 38,70 2,65 6-1903 43,00 3,50
6-1650 35,50 4,00 6-353 38,70 2,80 6-1060 43,00 4,00
5-605 35,60 3,60 6-575 39,00 2,00 6-2018 43,00 5,00
6-1808 35,95 1,78 6-1547 39,00 2,50 6-1413 43,00 5,50
6-1805 35,96 2,32 6-1038 39,00 3,00 6-759 43,25 2,60
6-980 36,00 1,50 6-1482 39,00 5,00 6-809 43,70 1,80
6-678 36,00 2,00 6-205 39,20 3,00 6-1723 43,70 3,55
6-981 36,00 2,00 6-1362 39,20 5,70 2-327 43,82 5,33
6-694 36,00 2,10 2-129 39,34 2,62 6-431 44,00 2,00
6-609 36,00 2,20 6-1148 39,40 2,10 6-1054 44,00 3,00
6-329 36,00 2,50 6-586 39,40 3,10 2-224 44,04 3,53
6-1713 36,00 2,65 6-753 39,50 2,60 2-132 44,12 2,62
6-923 36,00 3,00 5-321 39,60 3,53 2-031 44,17 1,78
6-1140 36,00 3,00 6-642 40,00 1,50 6-542 44,20 2,50
6-1980 36,00 4,00 6-027 40,00 2,00 6-1349 44,30 5,70
6-1652 36,00 5,00 6-566 40,00 2,50 6-1520 44,35 2,58
2-221 36,09 3,53 6-292 40,00 3,00 6-193 44,35 3,00
2-127 36,17 2,62 6-1912 40,00 3,50 6-772 44,70 3,50
6-1087 36,20 3,00 6-1497 40,00 4,00 6-975 44,83 2,67
6-154 36,30 1,78 6-1023 40,00 5,00 6-1724 44,96 2,57
5-670 36,50 1,78 6-1267 40,00 5,00 6-882 45,00 1,00
6-2007 36,50 2,00 6-1114 40,00 6,00 6-082 45,00 1,50
6-2054 36,60 2,90 6-102 40,60 4,00 6-054 45,00 2,00
6-970 37,00 1,50 2-326 40,64 5,33 6-323 45,00 2,50
6-1188 37,00 2,00 6-972 40,82 2,59 6-783 45,00 2,65
6-291 37,00 2,50 2-223 40,87 3,53 6-997 45,00 3,00
6-881 37,00 3,00 2-130 40,94 2,62 6-1907 45,00 3,50
6-1187 37,00 3,00 6-1144 41,00 1,50 6-1178 45,00 4,00
6-555 37,00 5,00 2-030 41,00 1,78 6-1195 45,00 4,50
6-1669 37,25 2,62 6-2049 41,00 2,00 6-726 45,00 5,00
5-606 37,30 3,60 6-541 41,00 2,50 6-1897 45,00 6,00
6-459 37,36 2,60 6-449 41,00 3,00 6-2008 45,30 1,93
3-920 37,47 3,00 6-525 41,28 3,53 5-035 45,36 3,53
2-325 37,47 5,33 6-337 41,40 2,62 2-133 45,69 2,62
6-1711 37,50 1,80 6-875 41,60 2,40 6-750 45,90 1,50
6-1257 37,50 4,00 6-414 41,75 2,60 6-1649 46,00 1,50
Sizing charts
O-Ring Guide
Parker Hannifin

6-1176 46,00 2,00 6-1721 51,10 1,60 6-1703 56,50 5,30
6-1020 46,00 3,00 6-434 51,50 1,50 2-331 56,52 5,33
6-944 46,00 4,00 6-1984 51,63 1,78 6-1271 56,70 3,00
6-1248 46,00 5,00 5-037 51,71 3,53 2-228 56,74 3,53
6-159 46,02 3,53 6-1333 51,94 3,53 2-140 56,82 2,62
6-354 46,70 2,80 6-1587 52,00 1,00 2-035 56,87 1,78
6-423 46,87 2,62 6-1234 52,00 2,50 6-1741 56,87 1,78
2-328 46,99 5,33 6-556 52,00 3,00 6-643 57,00 1,50
6-1141 47,00 2,00 2-137 52,07 2,62 6-719 57,00 2,50
6-1041 47,00 2,50 6-893 52,20 5,70 6-427 57,00 3,00
6-1535 47,00 2,62 6-1991 52,39 3,53 6-1137 57,00 4,00
6-1633 47,00 3,00 6-1185 52,50 1,80 6-1626 57,20 2,70
6-1059 47,00 4,00 6-778 53,00 1,80 6-447 58,00 2,00
6-1913 47,00 5,00 6-1347 53,00 2,00 6-1985 58,00 2,50
6-1483 47,00 5,50 6-1024 53,00 3,50 6-2050 58,00 2,50
6-293 47,20 5,70 6-1914 53,00 4,00 6-1354 58,00 3,00
2-225 47,22 3,53 6-113 53,00 5,00 6-2001 58,00 3,55
2-134 47,29 2,62 6-112 53,00 6,50 6-2016 58,00 3,55
2-032 47,35 1,78 3-928 53,09 3,00 6-2019 58,00 3,55
6-009 47,50 4,00 2-330 53,34 5,33 6-1666 58,00 3,75
6-1854 48,00 1,00 6-1657 53,50 2,00 6-109 58,00 4,00
6-370 48,00 2,00 2-227 53,57 3,53 2-141 58,42 2,62
6-2052 48,00 2,30 2-138 53,64 2,62 5-702 58,74 3,53
6-155 48,00 3,00 2-034 53,70 1,78 6-1585 59,20 5,70
6-1196 48,00 4,00 6-1317 53,80 4,00 3-932 59,36 3,00
6-673 48,20 1,78 6-1513 54,00 1,50 6-1864 59,50 5,00
6-435 48,40 4,85 6-1184 54,00 2,00 6-764 59,60 5,85
2-135 48,90 2,62 6-1274 54,00 2,00 2-332 59,69 5,33
6-1253 49,00 2,00 6-819 54,00 3,00 6-560 59,70 7,00
6-912 49,20 3,00 6-1643 54,00 3,15 2-229 59,92 3,53
5-701 49,20 3,53 6-879 54,00 4,00 2-142 59,99 2,62
6-1285 49,20 3,53 6-664 54,00 4,65 6-883 60,00 1,20
6-1070 49,20 5,70 6-1552 54,40 4,25 6-1970 60,00 1,50
6-194 49,50 3,00 6-1602 54,40 4,25 6-1726 60,00 2,00
6-1931 49,50 5,00 6-810 54,50 2,65 6-411 60,00 2,50
6-1981 50,00 1,50 6-1438 54,70 3,53 6-665 60,00 3,00
6-051 50,00 2,00 6-1695 55,00 1,20 6-107 60,00 4,10
6-055 50,00 2,50 6-141 55,00 2,00 6-1368 60,00 4,50
6-964 50,00 3,00 6-1709 55,00 2,50 6-114 60,00 5,00
6-1437 50,00 3,50 6-1065 55,00 3,00 2-036 60,05 1,78
6-603 50,00 4,00 6-1192 55,00 3,50 6-851 61,00 2,00
6-791 50,00 4,50 6-1186 55,00 4,00 6-1034 61,00 4,00
6-1226 50,00 5,00 6-1448 55,00 5,00 6-633 61,00 4,50
2-329 50,17 5,33 2-139 55,25 2,62 6-792 61,00 5,00
6-1489 50,20 3,00 6-703 55,30 2,00 2-143 61,60 2,62
6-1684 50,30 2,50 6-2010 55,30 5,70 6-1439 61,70 4,50
2-226 50,39 3,53 6-568 56,00 2,00 6-1419 62,00 1,50
2-136 50,47 2,62 6-985 56,00 3,00 6-1894 62,00 2,40
2-033 50,52 1,78 6-785 56,00 3,55 6-455 62,00 2,50
6-630 51,00 3,00 6-1145 56,00 4,00 6-699 62,00 3,00
O-Ring Guide
Parker Hannifin

6-1209 62,00 3,53 6-884 68,00 3,00 5-705 74,61 3,53
6-1104 62,00 4,00 6-1380 68,00 3,50 6-1889 74,90 1,78
6-1261 62,00 4,00 6-1992 68,00 3,53 6-1357 75,00 2,50
6-1117 62,00 6,00 6-1272 68,00 4,00 6-1075 75,00 3,00
2-333 62,87 5,33 6-941 68,00 5,00 6-1001 75,00 4,00
6-242 63,00 2,50 6-1908 68,00 5,50 6-1916 75,00 4,50
6-2045 63,00 3,00 6-990 69,00 2,50 6-1928 75,00 5,50
6-1162 63,00 3,50 6-824 69,00 3,00 2-337 75,57 5,33
6-151 63,00 4,00 6-1966 69,00 4,50 6-1750 75,65 2,70
6-474 63,00 4,50 6-1704 69,20 5,30 2-234 75,79 3,53
6-1094 63,00 6,00 2-335 69,22 5,33 2-151 75,87 2,62
2-230 63,09 3,53 6-272 69,24 3,40 2-041 75,92 1,78
2-144 63,17 2,62 2-232 69,44 3,53 6-1369 76,00 2,00
2-037 63,22 1,78 2-148 69,52 2,62 6-754 76,00 2,50
6-636 64,00 3,00 2-039 69,57 1,78 6-921 76,00 3,00
6-1661 64,00 4,00 6-552 70,00 2,00 6-464 76,00 4,50
6-1123 64,20 5,70 6-1462 70,00 2,50 6-805 77,00 2,00
5-805 64,39 1,78 6-031 70,00 3,00 6-1417 77,00 2,50
6-852 64,39 1,78 6-1554 70,00 3,50 6-1069 77,10 2,62
2-145 64,77 2,62 6-1778 70,00 3,50 6-1662 77,50 2,00
6-1588 65,00 1,00 6-1194 70,00 4,00 6-1467 77,50 2,62
6-1372 65,00 1,80 6-539 70,00 4,50 6-1950 77,80 1,50
6-501 65,00 2,00 6-899 70,00 5,00 6-2033 78,00 1,50
6-1620 65,00 2,50 6-1917 70,00 5,50 6-1475 78,00 2,00
6-1377 65,00 2,65 6-1212 70,00 8,00 6-978 78,00 2,50
6-523 65,00 3,00 6-1740 70,50 3,20 6-729 78,00 3,00
6-1053 65,00 4,00 6-787 71,00 3,55 6-826 78,00 3,50
6-596 65,00 4,50 6-1697 71,00 3,55 6-1002 78,00 5,00
6-1037 65,00 5,00 6-634 71,00 4,50 2-338 78,74 5,33
6-416 65,00 5,30 2-149 71,12 2,62 2-235 78,97 3,53
6-1927 65,00 5,50 5-704 71,44 3,53 6-820 79,00 1,50
5-703 65,09 3,53 6-979 72,00 2,50 6-1972 79,00 2,00
6-1974 66,00 1,50 6-045 72,00 3,00 6-1152 79,20 5,70
6-500 66,00 2,00 6-1013 72,00 4,00 6-992 79,30 2,62
6-1193 66,00 3,00 6-1909 72,00 5,50 6-1675 79,50 2,65
6-1273 66,00 5,00 2-336 72,39 5,33 6-195 79,50 3,00
6-1940 66,00 5,33 2-233 72,62 3,53 6-108 79,60 3,20
2-334 66,04 5,33 2-150 72,69 2,62 6-790 80,00 1,80
2-231 66,27 3,53 2-040 72,75 1,78 6-569 80,00 2,00
2-146 66,34 2,62 6-1628 73,00 2,00 6-1270 80,00 3,00
2-038 66,40 1,78 6-030 73,00 3,00 6-1316 80,00 3,50
6-243 67,00 1,50 6-757 73,00 4,00 6-788 80,00 3,55
6-316 67,00 2,50 6-1348 73,00 7,00 6-1057 80,00 4,00
6-1876 67,00 2,80 6-178 74,00 2,00 6-1181 80,00 5,00
6-659 67,00 3,00 6-2012 74,00 2,50 5-816 80,31 1,78
6-786 67,00 3,55 6-483 74,00 3,00 6-885 80,50 4,00
6-1607 67,00 4,00 6-294 74,20 5,70 6-121 81,00 3,00
6-1797 67,39 2,26 6-587 74,40 3,10 6-1077 81,00 4,00
5-361 67,84 3,53 6-1771 74,50 3,00 2-339 81,92 5,33
2-147 67,95 2,62 6-1609 74,60 3,53 6-2072 81,97 3,53
Sizing charts
O-Ring Guide
Parker Hannifin

6-513 82,00 2,00 2-238 88,49 3,53 6-1062 95,00 4,50
6-1472 82,00 3,00 6-1508 88,50 6,50 6-874 95,00 5,00
6-445 82,00 4,00 2-153 88,57 2,62 6-1910 95,00 5,50
6-1941 82,00 5,33 2-043 88,62 1,78 6-582 95,50 3,53
2-236 82,14 3,53 6-2030 89,00 1,50 6-700 96,00 2,00
6-1624 82,20 5,70 6-867 89,20 5,70 6-832 96,00 9,00
2-152 82,22 2,62 6-013 89,50 3,00 6-640 97,00 1,50
2-042 82,27 1,78 6-763 89,60 5,70 6-1415 97,00 4,00
6-821 83,00 1,00 6-1782 90,00 1,50 6-1306 97,00 5,00
6-1870 83,00 2,00 6-498 90,00 2,00 6-1736 97,50 3,55
6-900 83,00 3,00 6-1113 90,00 2,50 2-344 97,79 5,33
6-1715 83,00 4,00 6-216 90,00 3,00 6-1708 98,00 2,50
6-1804 83,77 1,78 6-1179 90,00 4,00 6-157 98,00 3,00
6-184 83,80 2,62 6-1265 90,00 4,80 2-241 98,02 3,53
6-676 84,00 2,50 6-1214 90,00 5,00 6-1303 99,00 3,00
6-456 84,00 3,00 6-1904 90,00 5,50 6-392 99,00 6,99
6-1134 84,00 3,50 6-1103 90,00 7,00 6-1089 99,20 5,70
6-1012 84,30 5,70 6-1777 90,80 3,50 6-2017 99,39 3,30
6-588 84,40 3,10 6-1429 91,00 2,00 6-1973 100,00 1,00
6-822 85,00 1,50 6-100 91,00 3,00 6-601 100,00 2,00
6-733 85,00 2,00 2-342 91,44 5,33 6-174 100,00 2,50
6-1014 85,00 3,00 2-239 91,67 3,53 6-1305 100,00 3,00
6-853 85,00 4,00 6-1891 92,00 1,40 6-413 100,00 4,00
6-1445 85,00 5,00 6-1452 92,00 3,00 6-137 100,00 5,00
6-1174 85,00 6,00 6-1061 92,00 4,00 6-1905 100,00 5,50
6-1406 85,00 6,99 6-1507 92,20 2,62 6-1395 100,00 6,00
2-340 85,09 5,33 6-804 92,50 3,55 6-1237 100,00 8,00
6-452 85,20 9,25 6-720 93,00 2,00 2-345 100,97 5,33
2-237 85,32 3,53 6-743 93,00 3,00 6-025 101,00 3,00
6-991 86,00 2,62 6-963 93,00 4,00 2-242 101,19 3,53
6-1622 86,00 3,00 6-1056 93,00 5,00 2-155 101,27 2,62
6-1776 86,00 3,20 6-257 93,39 1,47 2-045 101,32 1,78
6-1457 86,00 4,00 6-1672 93,40 2,57 6-724 102,00 3,00
6-1573 86,50 4,00 6-405 93,50 9,50 6-1163 102,00 4,00
6-574 86,84 5,33 6-446 94,00 2,00 6-1006 102,00 6,00
6-579 87,00 3,00 6-1095 94,00 3,00 6-1720 102,40 5,70
6-558 87,20 2,50 6-1455 94,00 3,50 6-2027 103,00 3,00
6-1016 87,20 5,70 6-1029 94,00 4,00 6-1055 103,00 5,00
6-309 87,30 2,00 6-1665 94,00 5,70 6-1200 104,00 5,30
6-1779 87,60 3,00 6-608 94,20 5,70 2-346 104,14 5,33
6-276 88,00 3,00 6-1850 94,40 3,10 6-1350 104,30 5,70
6-1052 88,00 4,00 6-339 94,50 3,00 2-243 104,37 3,53
6-1629 88,00 5,00 6-399 94,50 3,00 6-1175 104,50 3,00
6-2028 88,00 5,30 2-343 94,62 5,33 6-589 105,00 2,00
6-1165 88,00 6,00 2-240 94,84 3,53 6-2014 105,00 2,62
6-1111 88,00 8,00 2-154 94,92 2,62 6-1381 105,00 3,00
2-341 88,27 5,33 2-044 94,97 1,78 6-806 105,00 3,50
5-381 88,27 6,99 6-1781 95,00 1,50 6-995 105,00 4,00
6-561 88,30 7,00 6-1673 95,00 3,00 6-1074 105,00 5,00
6-1705 88,40 5,30 6-863 95,00 4,00 6-253 106,80 2,66
O-Ring Guide
Parker Hannifin

6-1320 107,00 8,00 5-843 118,72 2,62 6-902 130,00 5,00
6-762 107,31 6,99 6-448 119,20 5,70 6-2046 130,00 5,80
2-347 107,32 5,33 6-1515 119,60 3,20 6-577 130,00 6,00
2-244 107,54 3,53 6-768 119,60 5,70 6-1436 131,00 5,30
2-156 107,62 2,62 6-674 120,00 1,50 6-1775 131,10 3,20
2-046 107,67 1,78 6-504 120,00 3,00 6-1217 131,50 4,00
6-1106 108,00 8,00 6-1076 120,00 4,00 6-095 132,00 3,00
6-740 109,00 3,00 6-1180 120,00 5,00 6-1015 132,00 4,00
6-837 109,20 5,70 6-1003 120,00 6,00 6-1988 132,70 2,62
6-815 109,20 5,84 6-1427 120,00 10,00 2-355 132,72 5,33
6-767 109,40 3,10 2-351 120,02 5,33 2-431 132,72 6,99
6-2036 109,50 5,33 2-427 120,02 6,99 2-252 132,94 3,53
6-1580 110,00 1,50 2-248 120,24 3,53 6-1933 133,00 3,00
6-1367 110,00 2,50 2-158 120,32 2,62 2-160 133,02 2,62
6-903 110,00 3,00 2-048 120,37 1,78 2-050 133,07 1,78
6-1644 110,00 3,50 6-2064 121,00 8,00 6-688 133,35 5,33
6-915 110,00 5,00 6-961 122,00 3,00 6-812 133,50 12,00
6-1671 110,00 6,00 6-1630 122,00 6,00 6-515 134,00 3,00
2-348 110,49 5,33 2-352 123,19 5,33 6-1329 134,00 8,00
2-245 110,72 3,53 2-428 123,19 6,99 6-1783 135,00 1,50
6-1651 112,00 2,50 2-249 123,42 3,53 6-1277 135,00 3,00
6-421 112,00 3,00 6-1143 124,00 4,00 6-059 135,00 3,23
6-873 112,00 4,00 6-1281 125,00 2,50 6-060 135,00 3,43
6-1182 112,00 7,00 6-612 125,00 3,00 6-844 135,00 4,00
6-1999 113,00 7,00 6-1990 125,00 3,50 6-1085 135,00 5,00
2-349 113,67 5,33 6-1199 125,00 4,00 6-2000 135,50 6,00
2-425 113,67 6,99 6-457 125,00 5,00 2-356 135,89 5,33
2-246 113,89 3,53 6-115 125,00 8,00 2-432 135,89 6,99
2-157 113,97 2,62 5-850 125,09 6,60 6-1559 136,00 3,00
6-982 114,00 3,00 6-255 126,00 5,00 6-1154 136,00 4,00
6-1164 114,00 5,00 6-1572 126,00 5,10 2-253 136,12 3,53
2-047 114,02 1,78 6-1942 126,30 5,33 6-1807 136,53 1,78
6-1005 114,20 5,70 2-353 126,37 5,33 6-026 137,00 3,00
6-769 114,40 3,10 2-429 126,37 6,99 6-833 137,00 4,00
6-1826 114,55 2,57 2-250 126,59 3,53 6-559 137,00 14,00
6-1151 115,00 2,00 2-159 126,67 2,62 6-341 137,30 8,00
6-274 115,00 3,00 2-049 126,72 1,78 6-1949 137,50 3,30
6-1159 115,00 5,00 6-722 128,00 2,00 6-379 138,00 2,10
6-1169 115,00 5,00 6-1473 128,00 3,00 6-224 138,00 6,00
6-1660 115,00 5,33 6-1962 128,00 4,00 2-357 139,07 5,33
6-1421 115,00 6,00 6-1073 128,00 5,00 2-433 139,07 6,99
6-1322 116,00 3,00 6-1591 129,00 1,50 2-254 139,29 3,53
6-1105 116,50 1,78 6-1096 129,00 4,00 2-161 139,37 2,62
2-350 116,84 5,33 6-451 129,20 5,70 6-698 140,00 2,00
2-426 116,84 6,99 2-354 129,54 5,33 6-511 140,00 3,00
2-247 117,07 3,53 2-430 129,54 6,99 6-378 140,00 4,00
6-032 118,00 2,00 2-251 129,77 3,53 6-1136 140,00 5,00
6-1509 118,00 4,00 6-693 130,00 2,50 6-602 140,00 10,00
6-580 118,31 3,53 6-1296 130,00 3,00 6-2024 142,00 3,00
6-123 118,50 3,00 6-1084 130,00 4,00 6-1051 142,00 4,00
Sizing charts
O-Ring Guide
Parker Hannifin

6-1093 142,00 6,00 2-362 158,12 5,33 6-1976 177,00 3,00
6-1207 142,00 12,00 2-438 158,12 6,99 2-365 177,17 5,33
2-358 142,24 5,33 2-259 158,34 3,53 2-441 177,17 6,99
2-434 142,24 6,99 2-164 158,42 2,62 2-262 177,39 3,53
2-255 142,47 3,53 6-170 159,00 4,00 2-167 177,47 2,62
6-1592 142,90 3,20 6-1616 159,00 6,00 6-631 179,00 3,00
6-512 144,00 3,70 6-444 159,20 5,70 6-1098 179,20 5,70
6-1632 145,00 2,50 6-576 160,00 3,00 6-704 180,00 3,00
6-1696 145,00 2,88 6-818 160,00 4,00 6-1088 180,00 4,00
6-1233 145,00 4,00 6-1081 160,00 5,00 6-1280 180,00 5,00
6-1046 145,00 5,00 6-1161 160,00 5,00 6-1706 180,00 5,30
2-359 145,42 5,33 6-1702 160,00 5,30 6-1110 180,00 6,00
2-435 145,42 6,99 6-1292 160,00 6,00 6-1119 180,00 8,00
2-256 145,64 3,53 6-103 161,00 3,00 6-862 180,00 10,00
2-162 145,72 2,62 6-1045 162,00 2,50 6-1108 180,52 5,33
6-061 146,00 3,23 6-494 162,50 3,53 5-434 180,54 6,99
6-1680 147,60 2,65 6-1815 163,07 1,63 6-1816 183,00 1,78
6-2021 148,00 2,50 6-1612 164,00 2,00 2-366 183,52 5,33
6-756 148,00 10,00 6-983 164,20 5,70 2-442 183,52 6,99
2-257 148,52 3,53 6-814 164,20 5,84 2-263 183,74 3,53
2-360 148,59 5,33 6-1865 164,33 2,62 2-168 183,82 2,62
2-436 148,59 6,99 2-363 164,47 5,33 6-1058 185,00 3,00
6-1774 148,60 3,20 2-439 164,47 6,99 6-1428 185,00 4,00
6-623 149,20 5,70 2-260 164,69 3,53 6-1028 185,00 5,00
6-932 150,00 2,00 2-165 164,77 2,62 6-1121 185,00 6,00
6-2022 150,00 2,50 6-911 165,00 2,00 6-122 186,44 6,99
6-689 150,00 3,00 6-1402 165,00 4,00 6-1007 187,10 8,40
6-872 150,00 4,00 6-1529 165,00 5,00 6-466 188,00 4,00
6-1295 150,00 5,00 6-1593 165,10 3,20 6-706 189,20 5,70
6-222 150,00 5,40 6-1336 167,50 3,50 2-367 189,87 5,33
6-1147 150,00 6,00 6-1929 168,40 6,00 2-443 189,87 6,99
6-496 151,00 3,00 6-746 169,20 5,70 6-1848 190,00 1,78
6-962 151,00 4,00 6-1097 170,00 4,00 6-495 190,00 3,00
6-1803 151,39 2,57 6-1290 170,00 5,00 6-1044 190,00 4,00
6-318 151,70 5,60 2-364 170,82 5,33 6-614 190,00 5,00
2-361 151,77 5,33 2-440 170,82 6,99 6-1646 190,00 10,00
2-437 151,77 6,99 6-282 171,00 11,00 2-264 190,09 3,53
2-258 151,99 3,53 2-261 171,04 3,53 2-169 190,17 2,62
6-1553 152,00 1,78 2-166 171,12 2,62 6-299 191,00 1,78
6-1107 152,00 8,00 6-1659 171,45 3,20 6-1260 192,00 4,00
2-163 152,07 2,62 6-887 172,00 3,00 6-1391 192,00 8,00
6-1594 152,40 3,20 6-1177 172,00 4,00 6-1238 194,00 14,00
6-1773 153,50 3,20 6-1004 172,00 6,00 6-868 195,00 3,50
6-1625 154,60 1,78 6-492 174,00 3,00 6-1283 195,00 5,00
6-1294 155,00 3,00 6-655 174,20 5,70 6-1453 195,00 6,00
6-1390 155,00 3,53 6-889 174,30 3,50 6-920 195,50 12,00
6-1318 155,00 4,00 6-1356 175,00 5,00 6-747 196,00 4,00
6-1324 155,00 5,00 6-1068 175,00 6,00 6-273 196,00 12,00
6-773 155,00 10,00 6-841 175,00 10,00 2-368 196,22 5,33
6-1605 156,00 4,00 6-148 177,00 2,00 2-444 196,22 6,99
O-Ring Guide
Parker Hannifin

2-265 196,44 3,53 6-1989 221,60 2,62 6-407 242,00 6,00
2-170 196,52 2,62 2-372 221,62 5,33 6-878 245,00 3,00
6-547 197,00 3,00 2-269 221,84 3,53 6-1861 245,00 3,53
6-1932 197,00 6,00 2-174 221,92 2,62 6-1155 245,00 5,00
6-1653 198,00 3,00 6-1225 222,00 7,00 6-1534 245,00 7,00
6-1450 198,00 4,00 6-1679 223,00 2,65 6-671 245,00 10,00
6-1563 198,00 8,00 6-949 223,00 5,33 6-967 245,00 10,85
6-1307 200,00 4,00 6-1654 224,00 6,00 6-1668 246,00 3,00
6-1139 200,00 5,00 6-1945 224,00 7,00 6-1263 246,00 4,00
6-226 200,00 6,00 6-1250 225,00 3,00 2-376 247,02 5,33
6-865 201,00 4,00 6-485 225,00 5,00 2-273 247,24 3,53
2-369 202,57 5,33 6-1896 226,20 3,53 2-178 247,32 2,62
2-445 202,57 6,99 6-150 227,00 2,00 6-1030 248,00 5,00
2-266 202,79 3,53 2-373 227,97 5,33 6-1167 248,00 7,00
2-171 202,87 2,62 2-447 227,97 6,99 6-1010 249,30 5,70
6-1996 204,00 5,33 6-1211 228,00 3,00 6-514 250,00 3,00
6-342 204,00 8,00 2-270 228,19 3,53 6-1993 250,00 4,00
6-1849 205,00 1,78 2-175 228,27 2,62 6-1132 250,00 8,00
6-149 205,00 2,00 6-516 230,00 3,00 6-1582 250,00 10,00
6-546 205,00 3,00 6-1727 230,00 4,50 6-1227 252,00 4,00
6-1565 205,00 5,00 6-1767 230,00 4,80 2-377 253,37 5,33
6-1866 206,00 5,70 6-1948 230,00 5,00 2-449 253,37 6,99
6-1153 206,00 7,00 6-1293 230,00 8,00 2-274 253,59 3,53
6-1725 208,00 4,00 6-252 231,50 6,00 6-842 255,00 4,00
2-370 208,92 5,33 6-918 234,10 8,40 6-1522 255,00 5,00
2-267 209,14 3,53 6-846 234,20 7,00 6-1388 256,00 4,00
6-600 209,20 5,70 6-618 234,32 1,78 6-896 257,20 14,00
2-172 209,22 2,62 2-374 234,34 5,33 6-718 258,40 1,60
6-1118 210,00 4,00 2-271 234,54 3,53 6-1860 259,20 3,53
6-152 210,00 5,00 2-176 234,62 2,62 6-1231 260,00 4,00
5-445 210,24 6,99 6-1451 235,00 4,00 6-871 260,00 5,00
6-2051 212,00 5,30 6-1360 236,00 6,00 6-1201 260,00 8,00
6-461 213,68 7,14 6-635 236,00 7,00 6-1042 261,00 6,00
6-1997 214,00 5,33 6-864 238,00 4,00 6-336 262,00 5,33
6-954 214,63 2,18 6-412 238,00 5,00 5-976 264,79 6,60
6-1867 215,00 5,00 6-1426 238,00 6,00 6-1403 265,00 5,00
6-570 215,00 6,00 6-1282 238,00 10,00 6-1190 266,00 4,00
2-371 215,27 5,33 6-1239 238,00 14,00 2-378 266,07 5,33
2-446 215,27 6,99 6-1895 239,20 3,53 2-450 266,07 6,99
2-268 215,49 3,53 6-604 240,00 3,00 2-275 266,29 3,53
2-173 215,57 2,62 6-1346 240,00 5,00 6-505 270,00 3,00
6-1302 216,00 4,00 6-1284 240,00 8,00 6-988 270,00 5,33
6-1048 218,00 5,80 6-1564 240,00 8,00 6-1868 270,00 6,00
6-1050 218,00 6,00 6-436 240,00 12,00 6-1442 270,00 7,00
6-254 218,00 12,00 6-1384 240,66 7,40 6-1441 272,40 6,99
6-183 219,00 5,30 2-375 240,67 5,33 6-936 272,64 3,53
6-502 220,00 3,00 2-448 240,67 6,99 6-175 273,05 3,53
6-1063 220,00 5,00 2-272 240,89 3,53 6-1279 273,60 5,00
6-1425 220,00 7,00 2-177 240,97 2,62 6-948 274,00 5,33
6-1560 221,00 1,78 6-281 241,00 7,00 6-1476 275,00 5,00
Sizing charts
O-Ring Guide
Parker Hannifin
Sizing charts – O-Ring-sizes acc. to cross section d

6-2005 276,00 2,62 6-1546 328,00 6,99 6-723 380,00 4,00
2-379 278,77 5,33 6-1126 329,00 10,00 6-897 380,00 6,00
2-451 278,77 6,99 6-1784 329,57 4,80 6-927 380,00 8,00
6-1667 278,99 2,62 2-382 329,57 5,33 2-384 380,37 5,33
2-276 278,99 3,53 2-455 329,57 6,99 2-459 380,37 6,99
6-638 281,00 5,00 2-279 329,79 3,53 2-281 380,59 3,53
6-840 282,37 3,53 6-1258 330,00 5,00 6-204 381,00 5,00
6-234 283,00 12,00 6-283 330,00 6,00 6-1328 383,60 5,00
6-1477 285,00 5,00 6-469 330,00 8,00 6-1241 385,00 14,20
6-238 285,00 12,00 6-1408 331,50 6,00 6-711 388,00 5,00
6-1240 285,00 14,10 6-1947 334,00 2,62 6-1387 390,00 4,00
6-1018 289,42 5,87 6-517 335,00 3,00 2-460 393,07 6,99
6-1191 290,00 5,00 6-2013 335,00 5,00 6-1374 395,00 12,00
6-241 291,00 6,00 6-1129 335,00 7,00 6-209 398,00 8,00
2-380 291,47 5,33 6-1235 336,00 5,33 6-892 400,00 5,00
2-452 291,47 6,99 6-1090 336,00 7,00 6-458 400,00 12,00
2-277 291,69 3,53 6-1043 338,00 6,00 6-934 401,71 3,53
6-1663 294,00 3,00 6-1218 340,00 4,00 2-282 405,26 3,53
6-917 296,00 6,00 6-1881 340,00 5,33 2-385 405,26 5,33
6-1424 297,00 4,00 6-1334 340,00 10,00 2-461 405,26 6,99
6-2037 297,80 6,99 6-813 341,00 14,00 6-938 409,00 6,99
6-854 298,00 2,62 2-456 342,27 6,99 6-1326 410,00 6,00
6-1278 299,50 5,00 6-1255 343,00 6,00 6-1335 412,00 8,00
6-1168 300,00 6,00 6-1135 345,00 5,00 6-1242 415,00 14,20
6-1370 300,00 8,00 6-1918 349,00 5,33 2-462 417,96 6,99
6-1310 300,00 10,00 6-1583 350,00 10,00 6-1352 419,30 5,70
2-381 304,17 5,33 6-1639 351,21 4,00 6-165 420,00 3,50
2-453 304,17 6,99 6-1392 354,96 6,09 6-164 420,00 5,00
2-278 304,39 3,53 2-383 354,97 5,33 6-173 422,00 2,00
6-553 304,80 1,78 2-457 354,97 6,99 6-215 425,00 6,00
6-1359 304,80 3,18 6-518 355,00 3,00 6-1851 425,33 5,33
6-935 307,57 3,53 6-1888 355,00 8,00 6-1796 425,35 5,33
6-1351 309,30 5,70 2-280 355,19 3,53 5-525 425,83 3,18
6-1371 310,00 5,00 6-895 359,20 13,80 6-1937 428,00 5,00
6-1125 311,00 10,00 6-1795 359,53 5,33 6-741 428,00 5,70
6-1880 313,00 5,33 6-1142 360,00 4,00 6-898 429,00 6,00
6-607 315,00 4,00 6-1101 360,00 7,50 6-734 430,00 12,00
6-1171 315,00 5,00 6-1836 362,00 4,00 6-1584 430,00 16,00
6-510 315,00 6,00 6-1205 362,00 5,00 2-283 430,66 3,53
5-488 316,56 2,62 6-672 364,00 10,00 2-386 430,66 5,33
2-454 316,87 6,99 6-1786 365,00 5,30 2-463 430,66 6,99
6-1210 320,00 3,00 6-203 367,00 3,50 6-331 431,80 7,10
6-1707 320,00 3,53 2-458 367,67 6,99 6-939 434,00 6,99
6-716 320,00 6,00 6-1842 367,89 2,66 6-158 437,00 3,00
6-1458 320,00 6,50 6-1254 368,00 6,00 6-1256 440,00 4,00
6-153 320,50 5,33 6-807 370,00 5,50 6-1435 440,00 4,30
6-1172 320,62 3,53 6-1958 372,00 4,00 2-464 443,36 6,99
6-1755 323,00 5,33 6-1756 374,00 5,33 6-578 445,00 8,00
6-1404 325,00 5,00 6-598 375,00 5,34 6-909 449,00 12,00
6-947 325,00 5,33 6-682 375,00 10,00 6-835 449,50 6,99
O-Ring Guide
Parker Hannifin

6-1521 450,00 2,62 6-1957 522,00 4,00 6-422 607,00 607,00
6-669 450,00 10,00 6-1823 522,00 10,00 6-320 608,00 608,00
6-1757 455,00 5,33 6-529 524,00 524,00 2-473 608,08 6,99
6-1843 455,00 5,33 6-951 526,00 526,00 2-393 608,08 608,08
6-1674 455,00 6,00 6-467 528,00 528,00 6-1220 610,00 4,00
6-530 455,00 8,00 6-2003 532,00 3,00 6-1017 613,92 6,99
2-284 456,06 3,53 6-1787 532,18 5,33 6-742 614,00 7,00
2-387 456,06 5,33 6-1838 532,18 5,33 6-1157 615,00 5,00
2-465 456,06 6,99 2-390 532,21 532,21 6-647 617,00 7,00
6-1128 460,00 5,34 2-470 532,26 532,26 6-1841 618,50 2,00
6-1753 460,00 6,99 6-179 533,40 533,40 6-265 619,50 8,00
6-1008 463,00 7,00 6-1409 534,00 534,00 6-1528 621,00 8,50
6-1072 465,00 5,00 6-621 535,46 535,46 6-278 622,00 8,00
6-799 468,00 6,00 6-1608 538,00 538,00 6-1794 623,08 5,33
2-466 468,76 6,99 6-1299 540,00 540,00 6-1824 623,08 5,33
6-1934 469,00 5,33 6-836 543,50 543,50 6-247 624,00 6,99
6-2015 470,00 4,50 6-1811 545,00 7,00 6-2025 628,50 7,00
6-827 470,00 10,00 6-690 546,00 546,00 6-1262 632,00 6,00
6-930 477,00 10,50 6-1641 546,00 546,00 2-394 633,48 5,33
6-1219 480,00 4,00 6-2031 547,00 7,00 2-474 633,48 6,99
6-1243 480,00 14,00 6-670 550,00 550,00 6-536 635,00 5,00
6-256 480,06 10,00 6-1830 552,00 5,33 6-986 635,00 9,00
2-388 481,41 5,33 6-2006 553,00 5,33 6-1716 635,00 10,00
2-467 481,46 6,99 6-1952 555,00 3,00 6-235 637,00 10,00
6-1979 484,00 8,40 2-391 557,61 557,61 6-644 638,89 5,44
6-834 484,86 3,53 2-471 557,66 557,66 6-1853 639,00 4,00
6-1080 485,00 5,00 6-462 558,00 558,00 6-1831 640,00 2,62
6-1444 490,00 5,00 6-1964 560,00 7,00 6-1308 640,00 6,00
6-2073 492,00 3,53 6-1229 564,30 564,30 6-1859 640,00 7,00
2-468 494,16 6,99 6-709 565,00 565,00 6-1960 645,00 3,53
6-1754 494,16 6,99 6-1678 571,00 8,00 6-1959 645,00 4,00
6-328 500,00 3,53 6-176 577,85 577,85 6-381 647,70 6,99
6-1221 500,00 5,00 6-1300 579,00 579,00 6-1998 650,00 5,33
6-1420 500,00 6,00 6-626 580,00 580,00 2-395 658,88 5,33
6-800 500,00 8,00 6-1127 580,50 580,50 2-475 658,88 6,99
6-261 504,00 6,99 6-1812 582,68 7,00 6-1418 661,00 14,00
6-260 506,00 506,00 2-392 582,68 582,68 6-653 664,00 5,00
2-389 506,81 506,81 2-472 582,68 582,68 6-645 665,00 5,00
2-469 506,86 506,86 6-1244 585,00 585,00 6-2026 669,30 7,00
6-1829 508,00 5,33 6-1963 587,00 7,00 6-816 670,00 10,00
6-2065 510,00 3,00 6-1953 589,00 3,00 6-1443 675,00 5,30
6-1758 511,00 5,33 6-817 590,00 590,00 6-301 677,00 7,00
6-202 514,00 514,00 6-831 590,00 590,00 6-535 680,00 5,00
6-394 514,00 514,00 6-380 594,51 594,51 6-236 689,00 10,00
6-1837 515,00 5,33 6-1759 595,00 5,33 6-1742 690,00 8,00
6-1170 515,00 515,00 6-1844 595,00 5,33 6-266 693,50 10,10
6-775 515,00 515,00 6-2023 598,00 7,00 6-1160 695,00 5,00
6-919 515,90 515,90 6-1858 602,00 7,00 6-701 695,00 6,99
6-2002 520,00 3,00 6-233 602,00 602,00 6-321 700,00 10,00
6-1158 520,00 520,00 6-1301 602,00 602,00 5-092 701,68 6,99
Sizing charts
O-Ring Guide
Parker Hannifin

6-1790 702,66 5,33 6-2009 855,00 10,00 6-1762 2330,00 10,00
6-702 707,00 6,99 6-1223 860,00 3,00 6-1846 2350,00 6,99
6-668 708,00 10,00 6-707 865,00 8,40 6-1800 2390,00 6,00
6-531 710,00 5,33 6-363 865,00 12,00 6-1763 2500,00 10,00
6-1798 715,00 5,33 6-890 870,00 8,00 6-984 2965,00 7,00
6-1821 715,00 5,33 6-1760 874,00 5,33 6-1789 3000,00 5,33
6-521 716,00 8,00 6-597 875,00 8,00
6-372 720,00 6,99 6-230 882,00 10,00
6-389 723,90 6,99 6-304 887,00 6,99
6-267 734,00 6,99 6-1156 890,00 5,00
6-1245 735,00 15,00 6-1788 890,00 5,33
6-305 736,00 3,53 6-924 900,00 10,00
6-1847 736,00 7,00 6-249 910,00 6,99
6-1577 736,60 5,00 6-335 914,00 5,33
6-1309 740,00 6,00 6-708 929,00 6,00
6-228 740,00 10,00 6-250 936,00 6,99
6-1840 745,00 10,00 6-409 940,00 10,00
6-943 748,50 7,00 6-269 950,50 10,06
6-2067 750,00 3,00 6-1799 955,00 5,33
6-1079 750,00 5,00 6-1852 955,00 7,00
6-1071 755,00 5,00 6-302 955,00 12,60
6-417 760,00 5,00 6-334 960,00 5,33
6-303 763,01 6,99 6-527 974,00 7,00
6-1173 764,00 6,99 6-1761 975,00 5,33
6-1951 764,00 7,00 6-232 984,00 10,00
6-1222 770,00 7,00 6-460 996,00 7,00
6-667 770,00 10,00 6-534 1004,00 8,00
6-1944 777,00 12,00 6-1213 1005,00 15,00
6-1215 780,00 7,00 6-332 1011,00 5,33
6-248 783,00 6,99 6-280 1016,00 7,00
6-1956 786,00 4,00 6-1882 1029,00 8,30
6-237 786,00 10,00 6-239 1029,00 10,00
6-649 798,00 7,00 6-333 1042,00 5,33
6-415 800,00 5,33 6-270 1046,00 7,00
6-2042 801,00 4,00 6-393 1060,00 10,00
6-279 810,00 7,10 6-385 1071,00 14,40
6-322 810,00 10,00 6-240 1075,00 10,00
6-1943 818,00 12,00 6-271 1103,00 10,00
6-509 819,00 7,00 6-245 1154,00 10,00
6-2066 820,00 3,00 6-1793 1210,91 5,33
6-648 820,00 7,00 6-1968 1590,00 6,99
6-268 827,00 7,00 6-1801 1615,00 5,00
6-1131 835,50 7,00 6-1792 1678,90 5,33
6-229 837,00 10,00 6-1304 1840,00 5,00
6-190 840,00 12,00 6-1325 1865,00 5,00
6-1130 840,50 7,00 6-1802 1950,00 5,33
6-508 849,00 7,00 6-1066 1960,00 10,85
6-330 850,00 10,00 6-1067 2072,00 10,00
6-650 853,00 7,00 6-1791 2250,00 5,33
6-1246 853,00 20,00 6-1845 2324,00 6,99
O-Ring Guide
Parker Hannifin
Parbak® Back-up ring
Parbak® Back-up ring

Parbak® Back-up rings prevent extrusion in high-pressure applications, help
to maintain the lubricant film and thus prolong the service life of O-Rings.
Developed primarily for service in petroleum based hydraulic fluids at -40°C

to 121°C, Parker‘s standard Parbak® N0300-90 and N1444-90 compounds
provide the maximum benefits in back-up ring service. Compounds for use in
other fluids and for temperatures up to 204°C are available on request. Par-
baks will stretch up to 50%, and are quickly and easily installed. Advantages
of the contour design are obtained regardless of how Parbaks are installed
— they may be installed with the concave face in either direction, toward or
away from the O-Ring.
A
A
Detail A
W M
R
A
T A
R = 0,25 max.
Detail A ø
W M
A
R
ø
T M
R = 0,25 max.
ax.
Sizing charts
O-Ring Guide
Parker Hannifin
Sizing charts – Parbak® back-up ring 8-xxx sizes
Parker M W ±0.08 Parker M W ±0.08 Parker M W ±0.08

No. (mm) (mm) No. (mm) (mm) No. (mm) (mm)
8-004 2,44 1,35 8-103 2,77 2,18 8-151 76,66 2,18
8-005 3,23 1,35 8-104 3,56 2,18 8-152 83,01 2,18
8-006 3,56 1,35 8-105 4,34 2,18 8-153 89,36 2,18
8-007 4,34 1,35 8-106 5,13 2,18 8-154 95,71 2,18
8-008 5,13 1,35 8-107 5,94 2,18 8-155 102,06 2,18
8-009 5,94 1,35 8-108 6,73 2,18 8-156 108,41 2,18
8-010 6,73 1,35 8-109 8,31 2,18 8-157 114,76 2,18
8-011 8,31 1,35 8-110 9,91 2,18 8-158 121,11 2,18
8-012 9,91 1,35 8-111 11,48 2,18 8-159 127,46 2,18
8-013 11,56 1,35 8-112 13,08 2,18 8-160 133,81 2,18
8-014 13,16 1,35 8-113 14,66 2,18 8-161 140,16 2,18
8-015 14,73 1,35 8-114 16,26 2,18 8-162 146,51 2,18
8-016 16,33 1,35 8-115 17,83 2,18 8-163 152,86 2,18
8-017 17,91 1,35 8-116 19,43 2,18 8-164 159,21 2,18
8-018 19,51 1,35 8-117 21,11 2,18 8-165 165,56 2,18
8-019 21,08 1,35 8-118 22,68 2,18 8-166 171,91 2,18
8-020 22,68 1,35 8-119 24,28 2,18 8-167 178,26 2,18
8-021 24,26 1,35 8-120 25,86 2,18 8-168 184,61 2,18
8-022 25,86 1,35 8-121 27,46 2,18 8-169 190,96 2,18
8-023 27,43 1,35 8-122 29,03 2,18 8-170 197,31 2,18
8-024 29,03 1,35 8-123 30,63 2,18 8-171 203,66 2,18
8-025 30,61 1,35 8-124 32,21 2,18 8-172 210,01 2,18
8-026 32,21 1,35 8-125 33,81 2,18 8-173 216,36 2,18
8-027 33,78 1,35 8-126 35,38 2,18 8-174 222,71 2,18
8-028 35,38 1,35 8-127 36,98 2,18 8-175 229,06 2,18
8-029 38,56 1,35 8-128 38,56 2,18 8-176 235,41 2,18
8-030 41,73 1,35 8-129 40,16 2,18 8-177 241,76 2,18
8-031 44,91 1,35 8-130 41,73 2,18 8-178 248,11 2,18
8-032 48,08 1,35 8-131 43,33 2,18
8-033 51,26 1,35 8-132 44,91 2,18
8-034 54,43 1,35 8-133 46,51 2,18
8-035 57,61 1,35 8-134 48,08 2,18
8-036 60,78 1,35 8-135 49,68 2,18
8-037 63,96 1,35 8-136 51,26 2,18
8-038 67,13 1,35 8-137 52,86 2,18
8-039 70,31 1,35 8-138 54,43 2,18
8-040 73,48 1,35 8-139 56,03 2,18
8-041 76,66 1,35 8-140 57,61 2,18
8-042 83,01 1,35 8-141 59,21 2,18
8-043 89,36 1,35 8-142 60,78 2,18
8-044 95,71 1,35 8-143 62,38 2,18
8-045 102,06 1,35 8-144 63,96 2,18
8-046 108,41 1,35 8-145 65,56 2,18
8-047 114,76 1,35 8-146 67,13 2,18
8-048 121,11 1,35 8-147 68,73 2,18
8-049 127,46 1,35 8-148 70,31 2,18
8-050 133,81 1,35 8-149 71,91 2,18
8-102 1,96 2,18 8-150 73,48 2,18
O-Ring Guide
Parker Hannifin

8-201 5,13 3,00 8-249 124,28 3,00 8-309 11,43 4,65
8-202 6,73 3,00 8-250 127,46 3,00 8-310 13,03 4,65
8-203 8,30 3,00 8-251 130,63 3,00 8-311 14,60 4,65
8-204 9,90 3,00 8-252 133,81 3,00 8-312 16,20 4,65
8-205 11,56 3,00 8-253 136,98 3,00 8-313 17,78 4,65
8-206 13,16 3,00 8-254 140,16 3,00 8-314 19,38 4,65
8-207 14,73 3,00 8-255 143,33 3,00 8-315 20,96 4,65
8-208 16,33 3,00 8-256 146,51 3,00 8-316 22,56 4,65
8-209 17,90 3,00 8-257 149,68 3,00 8-317 24,13 4,65
8-210 19,46 3,00 8-258 152,86 3,00 8-318 25,73 4,65
8-211 21,03 3,00 8-259 159,21 3,00 8-319 27,31 4,65
8-212 22,63 3,00 8-260 165,56 3,00 8-320 28,91 4,65
8-213 24,21 3,00 8-261 171,91 3,00 8-321 30,42 4,65
8-214 25,81 3,00 8-262 178,26 3,00 8-322 32,08 4,65
8-215 27,38 3,00 8-263 184,61 3,00 8-323 33,43 4,65
8-216 28,98 3,00 8-264 190,96 3,00 8-324 35,26 4,65
8-217 30,56 3,00 8-265 197,31 3,00 8-325 38,43 4,65
8-218 32,16 3,00 8-266 203,66 3,00 8-326 41,61 4,65
8-219 33,88 3,00 8-267 210,01 3,00 8-327 44,78 4,65
8-220 35,48 3,00 8-268 216,36 3,00 8-328 47,96 4,65
8-221 37,06 3,00 8-269 222,71 3,00 8-329 51,13 4,65
8-222 38,66 3,00 8-270 229,06 3,00 8-330 54,31 4,65
8-223 41,83 3,00 8-271 235,41 3,00 8-331 57,61 4,65
8-224 45,01 3,00 8-272 241,76 3,00 8-332 60,78 4,65
8-225 48,18 3,00 8-273 248,11 3,00 8-333 63,96 4,65
8-226 51,36 3,00 8-274 254,46 3,00 8-334 67,13 4,65
8-227 54,53 3,00 8-275 267,16 3,00 8-335 70,31 4,65
8-228 57,71 3,00 8-276 279,86 3,00 8-336 73,48 4,65
8-229 60,88 3,00 8-277 292,56 3,00 8-337 76,66 4,65
8-230 64,06 3,00 8-278 305,26 3,00 8-338 79,83 4,65
8-231 66,83 3,00 8-279 330,66 3,00 8-339 83,13 4,65
8-232 70,00 3,00 8-280 356,05 3,00 8-340 86,31 4,65
8-233 73,18 3,00 8-281 381,46 3,00 8-341 89,48 4,65
8-234 76,35 3,00 8-282 406,12 3,00 8-342 92,66 4,65
8-235 79,53 3,00 8-283 431,52 3,00 8-343 95,83 4,65
8-236 82,70 3,00 8-284 456,92 3,00 8-344 99,01 4,65
8-237 85,88 3,00 8-345 102,31 4,65
8-238 89,05 3,00 8-346 105,49 4,65
8-239 92,23 3,00 8-347 108,66 4,65
8-240 95,40 3,00 8-348 111,84 4,65
8-241 98,58 3,00 8-349 115,01 4,65
8-242 101,75 3,00 8-350 118,19 4,65
8-243 104,93 3,00 8-351 121,36 4,65
8-244 108,10 3,00 8-352 124,54 4,65
8-245 111,28 3,00 8-353 127,71 4,65
8-246 114,45 3,00 8-354 130,89 4,65
Sizing charts
8-247 117,63 3,00 8-355 134,09 4,65

8-248 121,11 3,00 8-356 137,24 4,65
O-Ring Guide
Parker Hannifin

8-357 140,41 4,65 8-425 115,60 5,99 8-473 609,70 5,99
8-358 143,59 4,65 8-426 118,77 5,99 8-474 635,10 5,99
8-359 146,76 4,65 8-427 121,95 5,99 8-475 660,50 5,99
8-360 149,94 4,65 8-428 125,20 5,99
8-361 153,11 4,65 8-429 128,30 5,99
8-362 159,46 4,65 8-430 131,47 5,99
8-363 165,81 4,65 8-431 134,65 5,99
8-364 172,16 4,65 8-432 137,82 5,99
8-365 178,51 4,65 8-433 141,00 5,99
8-366 184,86 4,65 8-434 144,17 5,99
8-367 191,21 4,65 8-435 147,35 5,99
8-368 197,56 4,65 8-436 150,52 5,99
8-369 203,91 4,65 8-437 153,70 5,99
8-370 210,26 4,65 8-438 159,36 5,99
8-371 216,61 4,65 8-439 165,71 5,99
8-372 222,96 4,65 8-440 172,06 5,99
8-373 229,31 4,65 8-441 178,41 5,99
8-374 235,66 4,65 8-442 184,76 5,99
8-375 242,01 4,65 8-443 191,11 5,99
8-376 248,36 4,65 8-444 197,46 5,99
8-377 254,71 4,65 8-445 203,81 5,99
8-378 267,41 4,65 8-446 216,51 5,99
8-379 280,11 4,65 8-447 229,21 5,99
8-380 292,81 4,65 8-448 241,91 5,99
8-381 305,51 4,65 8-449 254,61 5,99
8-382 330,91 4,65 8-450 267,31 5,99
8-383 356,31 4,65 8-451 280,01 5,99
8-384 381,71 4,65 8-452 292,71 5,99
8-385 406,60 4,65 8-453 305,41 5,99
8-386 432,00 4,65 8-454 318,11 5,99
8-387 457,40 4,65 8-455 330,81 5,99
8-388 482,75 4,65 8-456 343,51 5,99
8-389 508,15 4,65 8-457 356,21 5,99
8-390 533,55 4,65 8-458 368,91 5,99
8-391 558,95 4,65 8-459 381,61 5,99
8-392 584,02 4,65 8-460 394,31 5,99
8-393 609,42 4,65 8-461 406,50 5,99
8-394 634,82 4,65 8-462 419,20 5,99
8-395 660,22 4,65 8-463 431,90 5,99
8-464 444,60 5,99
8-465 457,30 5,99
8-466 470,00 5,99
8-467 482,70 5,99
8-468 495,40 5,99
8-469 508,10 5,99
8-470 533,50 5,99
8-471 558,90 5,99
8-472 584,30 5,99
O-Ring Guide
Parker Hannifin
Sizing charts – Parbak® back-up ring other dimensions
Other dimensions
R T A
Parker No.
(mm) (mm) (mm)
004-050 2,21 1,24 1,14
102-178 3,28 1,35 1,14
201-284 4,42 1,27 1,02
309-395 6,65 1,93 1,52
425-475 8,74 2,97 2,44
Size tolerances Size tolerances

Parker No. M± Parker No. A ±
004-009 0,15 mm 004-284 0,08 mm
009-012 0,18 mm 309-325 0,10 mm
012-019 0,23 mm 425-475 0,13 mm
020-029 1,00 %
030-041 0,86 %
042-050 0,78 %
102-107 0,15 mm
108-110 0,18 mm
111-117 0,25 mm
118-128 1,10 %
129-151 0,95 %
152-164 0,78 %
165-178 0,74 %
201-204 0,18 mm
204-211 0,25 mm
212-227 1,10 %
228-235 0,90 %
236-259 0,78 %
260-277 0,74 %
278-284 0,67 %
309-315 0,25 mm
316-325 1,10 %
326-338 0,95 %
339-362 0,78 %
363-380 0,74 %
381-395 0,67 %
425-438 0,78 %
439-452 0,74 %
453-475 0,67 %
Please note:
Sizing charts
1. On ordering both size and compound should be stated e.g. 8-130, N300-90.
2. Parbak® size numbers correspond to O-Rings in the 2-xxx series, e.g. 8-211, N 300-90 is fitted
with the O-Ring 2-211, N 674-70.
O-Ring Guide
Parker Hannifin
Notes
O-Ring Guide
Parker Hannifin
Notes
O-Ring Guide
Parker Hannifin
Notes
O-Ring Guide
Parker Hannifin
Notes
O-Ring Guide
Parker Hannifin
Notes
O-Ring Guide
Parker Hannifin
© 2012 Parker Hannifin Corporation · Subject to change ODE 5712 DE · 07/2012
Parker Hannifin GmbH & Co. KG

Seal Group Europe
P.O. Box 1641
74306 Bietigheim-Bissingen ∙ Germany
Tel. +49 (0) 7142 351-0
Fax +49 (0) 7142 351-293
www.parker.com/oring-europe
e-mail: [email protected]

Parker O-Ring Guide

Uploaded by

Copyright:

Available Formats

Parker O-Ring Guide

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Parker O-Ring Guide

Uploaded by

Copyright:

Available Formats

What materials are discussed in the document?

What materials are discussed in the document?

What applications are the O-rings suitable for?

What applications are the O-rings suitable for?

O-Ring

4 Parker´s safety program

11 O-Ring material offering

Warning – user responsibility

Compatibility of seals and operating media / cleaning agents

tested for compatibility with operational media or cleaning agents approved

Prototypes and samples

Delivery and services

Sealing technology by Parker-Prädifa

Research and development

compatibility data for fluids, gases and solids.

Parbak® Back-up rings

Parbak® Back-up rings prevent extrusion in high-pressure applications, help

O-Ring material offering

• Polychloroprene Rubber (CR)

• Hydrogenated NBR (HNBR)

• Ethylene Propylene Rubber (EPDM)

• Silicone Rubber (VMQ)

• Liquid Silicone Rubber (LSR)

O-Ring material offering

Parker O-Ring compound numbering systems

Ethylene Propylene Rubber (EPDM)

Compound Hard- Colour Temp.­ Properties / applications

Compound Hard- Colour Temp.­ Properties / applications

O-Ring material offering

Silicone Rubber (VMQ)

Liquid Silicone Rubber (LSR)

Compound Hard- Colour Temp.­ Properties / applications

Compound Hard- Colour Temp.­ Properties / applications

O-Ring material offering

High Performance Fluoroelastomers (HiFluor®)

Compound Hard- Colour Temp.­ Properties / applications

MFG or natural gas

Diesel fuel, fuel oil,

Heated fuel oil

O-Ring material offering

Compounds for gas supply and appliances

Compounds for food industry

Parker compound Polymer Colour Standard

KTW approved compounds

O-Ring material offering

Parker Polymer Water- Colour Standard

AMS1) and NAS2) rubber specification descriptions

Rubber Parker Hardness Description title

AMS3303 S0613-60 55-65 Silicone; general purpose

Rubber Parker Hardness Description title

O-Ring material offering

Norme Française (NF), (french standard)

O-Ring material offering

The following charts are included to facilitate engineering analysis. Ad-

Length in cm of O-Ring circumference

O-Ring deformation (%)

1 2 3 4 5 6 7 8 910 20 30 50 100 200 500 1000

O-Ring Division Europe

Length in cm of O-Ring circumference

Compound Hard- Colour Temp. Properties / applications

Compound Hard- Colour Temp. Properties / applications

Compound Hard- Colour Temp. Properties / applications

Compound Hard- Colour Temp. Properties / applications

Compound Hard- Colour Temp. Properties / applications