Scribd Logo
Upload

Welcome to Scribd!

  • 22 views

    Product Data Sheet: Busbars - B80 - Sepam Series 80

    Uploaded by

    Gustavo Soto
    This document provides product specifications for busbars in Sepam series 80 relay application. It lists the key characteristics including metering and measurement types, protection types, communication protocols, input/output capacity, and packaging details. The busbars support circuit breaker control, metering of voltages, currents and powers, and protection functions like overcurrent, earth fault, and undervoltage. Communication is enabled via Modbus, DNP3, IEC 61850 and others.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Product Data Sheet: Busbars - B80 - Sepam Series 80

    Uploaded by

    Gustavo Soto
    22 views2 pages
    This document provides product specifications for busbars in Sepam series 80 relay application. It lists the key characteristics including metering and measurement types, protection types, communication protocols, input/output capacity, and packaging details. The busbars support circuit breaker control, metering of voltages, currents and powers, and protection functions like overcurrent, earth fault, and undervoltage. Communication is enabled via Modbus, DNP3, IEC 61850 and others.

    Original Description:

    manual separ siera 80 dial dial

    Original Title

    Sepam Series 80 NPP_59743

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides product specifications for busbars in Sepam series 80 relay application. It lists the key characteristics including metering and measurement types, protection types, communication protocols, input/output capacity, and packaging details. The busbars support circuit breaker control, metering of voltages, currents and powers, and protection functions like overcurrent, earth fault, and undervoltage. Communication is enabled via Modbus, DNP3, IEC 61850 and others.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    22 views2 pages

    Product Data Sheet: Busbars - B80 - Sepam Series 80

    Uploaded by

    Gustavo Soto
    This document provides product specifications for busbars in Sepam series 80 relay application. It lists the key characteristics including metering and measurement types, protection types, communication protocols, input/output capacity, and packaging details. The busbars support circuit breaker control, metering of voltages, currents and powers, and protection functions like overcurrent, earth fault, and undervoltage. Communication is enabled via Modbus, DNP3, IEC 61850 and others.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Product data sheet 59743

    Characteristics busbars - B80 - Sepam series 80

    Main

    Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
    Relay application Busbars
    Range of product Sepam series 80 NPP
    Sepam series 80
    Device short name B80
    Control and monitoring type Circuit breaker/contactor control ANSI code: 94/69 (option)
    Latching/acknowledgement ANSI code: 86
    Logic discrimination ANSI code: 68 (option)
    Switching of groups of settings
    Annunciation ANSI code: 30
    Automatic transfer (AT) (option)
    Logipam programming (ladder language) (option)
    Logic equation editor 200 operators
    Metering type Positive sequence voltage Vd/rotation direction
    Frequency
    Calculated active and reactive energy (+/- W.h, +/- VAR.h)
    Active and reactive energy by pulse counting (+/- W.h, +/- VAR.h) (option)
    Phase current I1, I2, I3 RMS
    Demand current I1, I2, I3
    Peak demand current IM1, IM2, IM3
    Measured residual current I'0
    Voltage U21, U32, U13, V1, V2, V3
    Residual voltage V0
    Negative sequence voltage Vi
    Active power P, P1, P2, P3
    Reactive power Q, Q1, Q2, Q3
    Apparent power S, S1, S2, S3
    Peak demand power PM, QM
    Power factor
    Voltage U'21, V'1 and frequency
    Measured residual current I0, calculated I'0∑
    Network and machine diagnosis type Unbalance ratio/negative sequence current Ii
    Disturbance recording
    Tripping context
    Phase fault and earth fault trip counters
    Harmonic distortion (THD), current and voltage Ithd, Uthd
    Difference in amplitude, frequency and phase of voltages with synchro-check option
    Apparent positive sequence impedance Zd
    Apparent phase-to-phase impedances Z21, Z32, Z13
    Phase displacement
    Datalog (DLG)
    Switchgear diagnosis type Cumulative breaking current

    Mar 31, 2021


    1
    CT/VT supervision ANSI code: 60FL
    Trip circuit supervision ANSI code: 74 (option)
    Auxiliary power supply monitoring
    Nb of operations, operating time, charging time, nb of racking out operations (option)

    Complementary
    Type of measurement Current
    Power (P,Q)
    Peak demand power
    Voltage
    Energy
    Frequency
    Power factor
    Protection type Neutral voltage displacement ANSI code: 59N
    Breaker failure ANSI code: 50BF
    Synchro-check ANSI code: 25 (option)
    Overvoltage (L-L or L-N) ANSI code: 59
    Negative sequence/unbalance ANSI code: 46
    Overfrequency ANSI code: 81H
    Underfrequency ANSI code: 81L
    Remanent undervoltage ANSI code: 27R
    Negative sequence overvoltage ANSI code: 47
    Phase overcurrent ANSI code: 50/51
    Earth fault/sensitive earth fault ANSI code: 50N/51N
    Earth fault/sensitive earth fault ANSI code: 50G/51G
    Positive sequence undercurrent ANSI code: 27D
    Undervoltage (L-L or L-N) ANSI code: 27
    Communication port protocol Measurement readout ( option ) : Modbus
    Remote indication and time tagging of events ( option ) : Modbus
    Remote control orders ( option ) : Modbus
    Remote protection setting ( option ) : Modbus
    Transfer of disturbance recording data ( option ) : Modbus
    Input output max capacity 42 inputs + 23 outputs
    Communication compatibility Modbus RTU
    DNP3
    Modbus TCPIP
    IEC 61850
    IEC 60870-5-103
    IEC 61850 goose message
    User machine interface type Without
    Advanced
    Mimic-based
    Remote

    Packing Units
    Package 1 Weight 2.826 kg
    Package 1 Height 2.840 dm
    Package 1 width 1.900 dm
    Package 1 Length 3.650 dm

    You might also like