3W Audio Amplifier Using TDA7056
Audio amplifier circuits commonly use single-chip audio ICs like LM384 and LM386.
Working principle:
Working on bridge-tied load principle, the circuit can output 1W power into an 8-ohm load
with a power supply of 6V, and 3W power into a 16-ohm load with a power supply of 12V.
Applications:appli
When you switch on the mains power supply, UM66 chip gets activated and it generates a
melody tone, which is fed Switch S7 is connected to pin 1 of microcontroller for manual
reset. Resistors R1 and R2 and capacitor C4 form the power-on reset circuitry.through
potmeter VR1. TDA7056 chip amplifies the melody sound to around 3W, which can be heard
from the speaker. By varying VR1, you can adjust the volume of the output tone.
Lable Address High Opcode
80 LDA, 8020H LDA8030H
80 MOV B, A MOV B, A
80 ADD B JNZ HERE
80 STA, 8022H DCR B
80 STA, 8032H XRA, A
80 HLT STA 8032
80 ADD B MOVC, A
80 MOV B, A XRA, A
80 STA, 8022H DCR B
80 MOV B, A MOVC, A
80 ADD B XRA, A
Address Opcode
Low Mnemonics