Scribd Logo
Upload

Welcome to Scribd!

  • 47 views

    Configuration E3D V6 Folder :: Bltouch Hotend: /01 - Mk4 - Hex - Nuts/02 - Bltouch

    Uploaded by

    Javier Fuentes Navarro
    This document provides a bill of materials and 3D printing instructions for installing a BLTouch probe and configuring a MK4 printer with an e3d v6 hotend for automatic bed leveling. It lists the required fasteners, electronics, and 3D printed parts along with recommended print settings and assembly instructions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Configuration E3D V6 Folder :: Bltouch Hotend: /01 - Mk4 - Hex - Nuts/02 - Bltouch

    Uploaded by

    Javier Fuentes Navarro
    47 views5 pages
    This document provides a bill of materials and 3D printing instructions for installing a BLTouch probe and configuring a MK4 printer with an e3d v6 hotend for automatic bed leveling. It lists the required fasteners, electronics, and 3D printed parts along with recommended print settings and assembly instructions.

    Original Title

    00_Instructions_BLTouch_e3d_v6

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a bill of materials and 3D printing instructions for installing a BLTouch probe and configuring a MK4 printer with an e3d v6 hotend for automatic bed leveling. It lists the required fasteners, electronics, and 3D printed parts along with recommended print settings and assembly instructions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    47 views5 pages

    Configuration E3D V6 Folder :: Bltouch Hotend: /01 - Mk4 - Hex - Nuts/02 - Bltouch

    Uploaded by

    Javier Fuentes Navarro
    This document provides a bill of materials and 3D printing instructions for installing a BLTouch probe and configuring a MK4 printer with an e3d v6 hotend for automatic bed leveling. It lists the required fasteners, electronics, and 3D printed parts along with recommended print settings and assembly instructions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 5

    1/5

    Configuration: BLTouch e3d v6 hotend


    Folder: /01_MK4_Hex_Nuts/02_BLTouch

    Quantity Part name Comment 3D-View/Material


    Fasteners
    13x M3x10 Cylindrical Head Screw ISO 4762
    10x M3x20 Cylindrical Head Screw ISO 4762
    1x M3x30 Cylindrical Head Screw ISO 4762
    24x M3 Hex Nut ISO 4032
    7x M3 Washer DIN 125
    3D-Printed Parts
    1x 01_X_Carriage
    PLA/PETG/ABS/GreenTec/...
    1x 02_Carrier_Plate_e3d_v6
    1x 03_Fanduct_(A)a PLA is not
    PETG/ABS/GreenTec/...
    1x 04_Cover_Plate_e3d_v6_BLTouch recommendedb
    1x 05_Rear_Bracket
    2x 06_Belt_Tensioner
    2x 07_Distance_Sleeve_21mm
    2x 08_Distance_Sleeve_12mm
    1x 09_PCB_Holder PLA/PETG/ABS/GreenTec/...
    1x 10_Bowden_Collet
    2x 11_Belt_Clip
    1x 12_AI3M_Letters
    1x 13_BlTouch_Mount_e3d_v6
    Miscellaneous & Electronics
    1x Radial Cooling Fan 5015
    1x Axialfan 4010
    1x Antclabs BLTouch/Clone Probe-Offset: X = +29 Y = -15

    a
    In case your radial fan tends to vibrate in the orientation with Fanduct (A) you can test the alternative
    version with Fanduct (B) and Fanduct (B)-Mount fromt the folder 03_Various_Parts (see Rendering-Pictures).
    Therefore you will additonally need two M3x20 bolts and nuts.
    b
    The glass transition temperature of PLA is too low to permanently withstand the temperature exposure at
    the hotend and above all to resist the heat radiation of the heated bed without any deformation.

    BOM - BLTouch - e3d v6 - v1.4 - 13062020EN - ©ML3DPrinting


    2/5

    Part name 3D-View Slicer-Settingsc

    01_X_Carriage • Layer height: 0,2 mm


    • Infill density: 15-20 %
    (Gyroid or Honeycomb)
    • Shell thickness: 1.2 mm
    • Top thickness: 1.2 mm
    • Bottom thickness: 0.6-0.8 mm
    • Support structure: No
    02_Carrier_Plate_e3d_v6d • Bed adhesion: Skirt / Brim

    • Layer height: 0.2 mm


    • Shell thickness: >10 mm
    • Line orientation: concentric
    • Support strucutre: No
    The STL model contains pre-designed
    03_Fanduct_(A) custom support
    • Bed adhesion: Brim
    In- and outside min. 6 Lines
    • Z-seam: Aligned X=0,Y=0
    • CURA specific:
    - Combing deactivated
    - Fill gaps between walls deactivated

    • Layer height: 0.2 mm


    • Infill density: 15-20 %
    04_Cover_Plate_e3d_v6 (Gyroid or Honeycomb)
    • Shell thickness: 1.2 mm
    _BLTouch • Top/Bottom thickn.: 1.2 mm
    • Support structure: No
    • Bed adhesion: Skirt / Brim

    • Layer height: 0.2 mm


    • Infill density: 100 %
    • Shell thickness: 1.2 mm
    05_Rear_Bracket
    • Support structure: No
    Bed adhesion: Skirt / Brim

    BOM - BLTouch - e3d v6 - v1.4 - 13062020EN - ©ML3DPrinting


    3/5

    06_Belt_Tensioner

    07_Distance_Sleeve_21mm

    08_Distance_Sleeve_12mm

    09_PCB_Holder • Layer height: 0.2 mm


    • Infill density: 100 %
    • Shell thickness: 1.2 mm
    • Support structure: No
    10_Bowden_Collet
    • Bed adhesion: Skirt / Brim

    11_Belt_Clip

    12_AI3M_Letters

    13_BLTouch_Mount_e3d_v6

    c
    The print parts are pre-orientated for the best print and strength results, please do not change the part
    orientation if not necessary
    d
    Note: If the hotend still rotates despite the clamping between carrier plate and cover plate you can screw
    an M3x10 screw into the center hole of the carrier plate, which prevents the rotation of the hotend with a
    light pressure on the heat sink. The bore is 2.7mm in diameter and thus intended for the screw to cut the
    necessary thread itself.

    Please refer to the construction video for detailed step by step instructions on the assembling
    process of the Carriage system as exemplary by the e3d v5 hotend.
    (https://www.youtube.com/watch?v=LadxXGYkU20)

    In the project repo 04_Firmware_Marlin_v2.0.5.3/02_BLTouch you will find the newest


    Marlin 2.0.5.3 firmware version adapted for the MK4 X-Carriage and automatic Leveling with BLTouch

    BOM - BLTouch - e3d v6 - v1.4 - 13062020EN - ©ML3DPrinting


    4/5

    BOM - BLTouch - e3d v6 - v1.4 - 13062020EN - ©ML3DPrinting


    5/5

    BOM - BLTouch - e3d v6 - v1.4 - 13062020EN - ©ML3DPrinting

    You might also like