Scribd
Upload
680 views1 page

Type of Rejection

This document outlines various types of rejections that can occur during manufacturing processes. It categorizes rejections into sections for rust, dents, lines marks, peel off, oversized diameters, tapers, undersized diameters, lack of washing, oval shapes, and window offsets during outer diameter operations. Rejection reasons during pre-machining include double strokes, peel off, dents, lines, rust, bends, lack of face washing, step marks, and face lines. CNC rejections involve out of specification bores, undersized bores, dimension problems, and vibration marks. Hobbing rejections include out of specification and undersized master gears, tapered teeth, offset drills, drill ovality,

Uploaded by

muthuselvan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
680 views1 page

Type of Rejection

This document outlines various types of rejections that can occur during manufacturing processes. It categorizes rejections into sections for rust, dents, lines marks, peel off, oversized diameters, tapers, undersized diameters, lack of washing, oval shapes, and window offsets during outer diameter operations. Rejection reasons during pre-machining include double strokes, peel off, dents, lines, rust, bends, lack of face washing, step marks, and face lines. CNC rejections involve out of specification bores, undersized bores, dimension problems, and vibration marks. Hobbing rejections include out of specification and undersized master gears, tapered teeth, offset drills, drill ovality,

Uploaded by

muthuselvan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

TYPES OF REJECTION

S.NO Section Types of rejection

1 Rust

2 Dent mark
RM
3 Line mark

4 Peel off

1 OD dent mark

2 OD tapper

3 OD under size

4 OD unwash

5 OD ovalty

6 Window offset
PRE-MACHINING
7 Double strok

8 Peel off

9 Dent mark

10 Line mark

11 Rust

12 Bend

13 Face unwash

14 Face step mark

15 Face line mark

16 CNC Bore o/s

17 Bore U/S

18 Dimention problem

19 Vibration mark

20 MOP O/S

21 HOBBING MOP u/s

22 Tapper teeth

23 Drill off set

24 Drill ovalty

25 PCD Gauge tight

26 Worng naming

27 FINISHING Blow holes

28 Runout problem

29 Key width o/s

30 Key width u/s

31 Key way no go ans

12345

You might also like