Kings: Department of Computer Science and Engineering Question Bank
Kings: Department of Computer Science and Engineering Question Bank
KINGS
COLLEGE OF ENGINEERING
DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING
QUESTION BANK
PART – A
1. How AD0-AD7 are multiplexed?
2. Why the ready signals of 8085 microprocessor is sampled by the processor?
3. List out the similarities between CALL-RET and PUSH-POP instruction
4. How the address and data lines are demultiplexed in 8085?
5. List out the function of SIM instructions.
6. What is buffer? What is the use of buffer?
7. State the function of HOLD pin in intel 8085 processor.
8. What is the need of ALE signals in 8085 processor?
9. What is the necessity of S0,S1 pins in 8085?
10.List the allowed register pairs of 8085?
11.Mention the purpose of SID and SOD lines.
12. What is Microprocessor? Give the power supply & clock frequency of 8085
13. List few applications of microprocessor-based system.
14. What are the functions of an accumulator?
15.Mention the purpose of SID and SOD lines
16. What is an Opcode?
17. List the four instructions which control the interrupt structure of the 8085
18. What is meant by polling?
19. What is meant by interrupt?
20. Explain priority interrupts of 8085.
21. What is a microcomputer?
22. What is the signal classification of 8085
23. What are operations performed on data in 8085
24. Steps involved to fetch a byte in 8085
25. How many interrupts does 8085 have, mention them
26. Basic concepts in memory interfacing
PART- B
1. (i) Explain the Logical and Arithmetic instructions available in 8085 (10)
(ii)Explain the functions of Flag register in 8085 processor (6)
2. (i)Differences between I/O mapped I/O and Memory mapped I/O (6)
(ii) Write an assembly language program to convert 8-bit binary to ASCII code (10)
3. (i) Draw the block diagram of 8085 microprocessor and explain(10)
(ii) Write an assembly language program to add two 2-digit BCD numbers (6)
4. (i) Explain the instruction set of 8085 microprocessor in detail with one example for
each group (10)
(ii) Write a notes on status flag (6)
5. Explain the pin diagram of 8085 microprocessor and explain the functional usage of
each pin in detail (16)
6. (i) Draw the timing diagram of MVI A,08H (8)
(ii) Write an assembly language program to convert ASCII code to 8-bit binary (8)
7. (i) Explain the timing diagram when 8085 fetches and executes instruction OUT FFH
which is stored in memory staring form the address 8000H (12)
(ii) List out the maskable and non-maskable interrupts available in 8085
microprocessor (4)
8. (i) How do the instructions of 8085 is classified based on their functions and word
length? Give example (10)
(ii) Write an ASSEMBLY LANGUAGE PROGRAM to add two 8-bit numbers (6)
PART - A
PART-B
1. (i) Write an assembly language program in 8086 to search the largest data in the
array (10)
(ii) Explain the various status flags in 8086 (6)
PART -A
1.How clock signal is generated in 8086? What is the maximum internal clock frequency
of 8086?
2. Define the multiprocessor system.
3. Draw and explain the time shared bus.
4. List the advantages of multiprocessor system.
5. What is bus arbiter? What is the function of that bus arbiter?
6. Explain the features of 8087
7. Explain the function of 8086 pin
(a) NMI
(b) DT/R
(C) QS0-QS1
8. Explain the function of
(a) BUSY
(b) RQ/GT
(c) INT
9. What are the schemes for establishing priority in order to resolve bus arbitration
problem?
10.How single stepping can be done in 8086?
PART-B
1.Explain about the interconnection of topologies structure in multiprocessor system?(16)
2.Differentiate between loosely and tightly coupled configuration system. (8)
3.Explain the connection between bus master and bus arbiter with the help of neat
diagram (8)
4.Describe the architecture &working principle of multiprocessor configuration. (16)
5.(i) Draw and explain the bit pattern of the control registers
of 8087 (4)
(ii) Draw and explain the block diagram of 8087 (12)
6.(i) Draw and explain the block diagram of 8089 (12)
(ii) List the feature of 8089. (4)
7.Explain the interaction between 8086 and 8089 (16)
PART-A
PART – B
UNIT V-MICROCONTROLLERS
PART –A
1. What is microcontroller?
2. What is the difference between the microprocessor and microcontrollers?
3. List the features of 8051 microcontrollers.
4. State the various modes available for timer in 8051
5. List the interrupts of 8051 microcontrollers
6. What are the register banks in 8051 microcontroller?
7. Draw and explain the bit pattern of TMOD register
8. What are the types of addressing modes in the 8051?
9. Explain DJNZ instructions of intel 8051 microcontroller?
. 10. State the function of RS1 and RS0 bits in the flag register of
intel 8051.
11. Explain the function of the pins PSEN and EA of 8051.
12. Explain the 16-bit registers DPTR and SP of 8051.
13. Name the special functions registers available in 8051.
14..Explain the register IE format of 8051.
15.Name the five interrupt sources of 8051?.
PART-B
1. With the necessary diagram of control word format, explain the various operating
modes of timer in 8051 microcontroller (16)
2. (i) With the help of neat diagram explain the memory organization of 8051
microcontroller (8)
(ii) List out the silent feature of 8-bit microcontrollers (8)