Scribd
Upload
86 views1 page

Rescantling Calculation: 1.) Keel Plate (T)

The document provides calculations to determine the required plate thicknesses for various parts of a ship with particular dimensions and cargo capacity. The keel plate requires a thickness of 12 mm including corrosion allowance. The bottom plate requires a thickness of 10 mm with corrosion allowance. The bilge plate thickness is also specified as 10 mm with corrosion allowance. The side plate thickness is calculated to be 9 mm including corrosion allowance. The strength deck and upper deck amidships requires a thickness of 12 mm with corrosion allowance. The hopper well transverse and longitudinal bulkheads require a thickness of 12 mm with corrosion allowance.

Uploaded by

Muhammad Alif Zauhar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
86 views1 page

Rescantling Calculation: 1.) Keel Plate (T)

The document provides calculations to determine the required plate thicknesses for various parts of a ship with particular dimensions and cargo capacity. The keel plate requires a thickness of 12 mm including corrosion allowance. The bottom plate requires a thickness of 10 mm with corrosion allowance. The bilge plate thickness is also specified as 10 mm with corrosion allowance. The side plate thickness is calculated to be 9 mm including corrosion allowance. The strength deck and upper deck amidships requires a thickness of 12 mm with corrosion allowance. The hopper well transverse and longitudinal bulkheads require a thickness of 12 mm with corrosion allowance.

Uploaded by

Muhammad Alif Zauhar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RESCANTLING 

CALCULATION

Particulars:
Length Over All 49.60 m Deadweight 1500 tonnes
2
Breadth  12.80 m Cargo Area (hopper) 408 m
Depth 4.50 m
Draft Loaded 3.80 m
Hopper Capacity 1000.00 m3
Material Factor (K) 1.00
Frame Space (S) 0.55 m

1.) Keel Plate (t)
t = 5.1 + 0.040LK1/2 + 4.5S
1/2 
t = 5.1 + (0.040)(49.60)(1) + 4.5(0.55)
t = 9.559 mm (required thickness)
t = 12.00 mm (with corrosion allowance)

2.) Bottom Plate (t)
t = 4.3 + 0.036LK1/2 + 4.5S
t = 4.3 + (0.036)(49.60)(1)1/2 + 4.5(0.55)
t = 8.561 mm (required thickness)
t = 10.00 mm (with corrosion allowance)

3.) Bilge Plate (t)

t = 10.00 mm (with corrosion allowance)
(Note: Bilge plate thickness is similar with bottom plate thickness)

4.) Side Plate (t)
t = 2.5 + 0.031LK1/2 + 4.5S
t = 2.5 + (0.031)(49.60)(1)1/2 + 4.5(0.55)
t = 6.761 mm (required thickness)
t = 9.00 mm (with corrosion allowance)

5.) Strength Deck / Upper Deck Amidships (t)
t = 2.5 + 0.032LK1/2 + 4.5S
1/2 
t = 2.5 + (0.032)(49.60)(1) + 4.5(0.55)
t = 8.177 mm (required thickness)
t = 12.00 mm (with corrosion allowance)

6.) Hopper Well
(transverse and longitudinal bulkheads)
t = 2.7 + 0.034LK1/2 + 4.5S
1/2 
t = 2.7 + (0.034)(49.60)(1) + 4.5(0.55)
t = 6.861 mm (required thickness)
t = 12.00 mm (with corrosion allowance)

You might also like