Current Date: 11/19/2021 7:25:56 PM

Units System: kN_m

Design code: IS 800 : 2007

DEMANDS
Description Pu Ru RuLeft Mu
kN kN kN kN*m

LC-7 -0.06 -119.72 0.00 0.00

LC-8 -0.06 -11.55 0.00 0.00
LC-9 0.75 -71.16 0.00 0.00
LC-10 -1.05 13.93 0.00 0.00
LC-11 1.15 -13.69 0.00 0.00
LC-12 -54.44 51.85 0.00 0.00
LC-13 52.44 -51.73 0.00 0.00
LC-21 16.63 316.06 0.00 0.00
LC-22 -475.02 603.55 0.00 0.00
LC-23 0.60 -233.73 0.00 0.00
LC-100 0.06 -23.37 0.00 0.00
LC-101 0.83 15.80 0.00 0.00
LC-102 -23.75 30.18 0.00 0.00
LC-103 0.83 15.80 0.00 0.00
LC-104 -23.75 30.18 0.00 0.00
LC-1001 1.00 -203.04 0.00 0.00
LC-1002 0.43 -248.45 0.00 0.00
LC-1003 -21.92 -157.06 0.00 0.00
LC-1004 25.58 -217.42 0.00 0.00
LC-1005 -24.15 -234.08 0.00 0.00
LC-1006 23.35 -294.44 0.00 0.00
LC-1007 -25.70 -184.08 0.00 0.00
LC-1008 26.08 -267.48 0.00 0.00
LC-1009 -48.62 -138.10 0.00 0.00
LC-1010 -1.12 -198.45 0.00 0.00
LC-1011 1.50 -253.10 0.00 0.00
LC-1012 49.00 -313.46 0.00 0.00
LC-1013 -57.92 -124.16 0.00 0.00
LC-1014 58.64 -327.33 0.00 0.00
LC-1015 0.95 -303.65 0.00 0.00

GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. Max. Sta. References

Fin plate
Length [mm] 245.00 211.50 239.40

Lmax = hb - max(dnt, ktop) - max(dnb, kbottom) = 352.5 [mm] - max(0 [mm] , 56.55 [mm] ) - max(0 [mm] , 56.55 [mm] ) = 239.4 [mm]

Thickness [mm] 32.00 6.00 50.00

Bolts number 3 2.00 2.00

Shear plate (Beam side)
Vertical edge distance [mm] 40.00 49.50 391.92 Cl. 10.2.4.2, Cl.
10.2.4.3

ShearedEdgesFalse
emin = 1.5*dh = 1.5*33 [mm] = 49.5 [mm] Cl. 10.2.4.2
CorrosionExposedFalse
emax = 12.0*t*((250.0 [MPa] )/fy)0.5 = 12.0*32 [mm] *((250.0 [MPa] )/240 [N/mm2] )0.5 = 391.918 [mm] Cl. 10.2.4.3

Horizontal edge distance [mm] 50.00 49.50 391.92 Cl. 10.2.4.2, Cl.
10.2.4.3

ShearedEdgesFalse
emin = 1.5*dh = 1.5*33 [mm] = 49.5 [mm] Cl. 10.2.4.2
CorrosionExposedFalse
emax = 12.0*t*((250.0 [MPa] )/fy)0.5 = 12.0*32 [mm] *((250.0 [MPa] )/240 [N/mm2] )0.5 = 391.918 [mm] Cl. 10.2.4.3

Vertical center-to-center spacing (pitch) [mm] 82.50 75.00 192.00 Cl. 10.2.3.3

pmin = 2.5*d = 2.5*30 [mm] = 75 [mm]

pmax = min(100 [mm] + 4*t, 300 [mm] ) = min(100 [mm] + 4*23 [mm] , 300 [mm] ) = 192 [mm] Cl. 10.2.3.3

Horizontal center-to-center spacing (gage) [mm] 82.50 75.00 200.00 Cl. 10.2.3.2

pmin = 2.5*d = 2.5*30 [mm] = 75 [mm]

pmax = min(12*t, 200 [mm] ) = min(12*23 [mm] , 200 [mm] ) = 200 [mm] Cl. 10.2.3.2

Shear plate (Support side)

Weld size [mm] 25.00 6.00 -

Beam
Horizontal edge distance [mm] 40.00 49.50 281.69 Cl. 10.2.4.2, Cl.
10.2.4.3

ShearedEdgesFalse
emin = 1.5*dh = 1.5*33 [mm] = 49.5 [mm] Cl. 10.2.4.2
CorrosionExposedFalse
emax = 12.0*t*((250.0 [MPa] )/fy)0.5 = 12.0*23 [mm] *((250.0 [MPa] )/240 [N/mm2] )0.5 = 281.691 [mm] Cl. 10.2.4.3

WARNINGS
The connection does not fit in beam.

DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References

Plate (beam side)

Bolt group shear [kN] 261.19 257.35 LC-22-8 0.99 Cl. 10.3.3

Asb = π/4*d = π/4*30 [mm] = 706.858 [mm2]

2 2

Anb = 0.78*π/4*d2 = 0.78*π/4*30 [mm] 2 = 551.35 [mm2]

Vnsb = fu/(3)0.5*(nn*Anb + ns*Asb) = 800 [N/mm2] /(3)0.5*(0*551.35 [mm2] + 1*706.858 [mm2] ) = 326.484 [kN] Cl. 10.3.3
Vdsb = Vnsb/mb = 326.484 [kN] /1.25 = 261.187 [kN] Cl. 10.3.3
Ri = ((Px/n + Mecc*yi/Ibg)2 + (Py/n + Mecc*xi/Ibg)2)0.5 = ((-475.022 [kN] /6 + 55.074 [kN*m] *-82.5 [mm] /37434.38 [mm2] )2 + (603.551
[kN] /6 + 55.074 [kN*m] *-41.25 [mm] /37434.38 [mm2] )2)0.5 = 204.477 [kN]
Ri = ((Px/n + Mecc*yi/Ibg)2 + (Py/n + Mecc*xi/Ibg)2)0.5 = ((-475.022 [kN] /6 + 55.074 [kN*m] *-82.5 [mm] /37434.38 [mm2] )2 + (603.551
[kN] /6 + 55.074 [kN*m] *41.25 [mm] /37434.38 [mm2] )2)0.5 = 257.351 [kN]
Ri = ((Px/n + Mecc*yi/Ibg)2 + (Py/n + Mecc*xi/Ibg)2)0.5 = ((-475.022 [kN] /6 + 55.074 [kN*m] *0 [mm] /37434.38 [mm2] )2 + (603.551 [kN] /6
+ 55.074 [kN*m] *-41.25 [mm] /37434.38 [mm2] )2)0.5 = 88.658 [kN]
Ri = ((Px/n + Mecc*yi/Ibg)2 + (Py/n + Mecc*xi/Ibg)2)0.5 = ((-475.022 [kN] /6 + 55.074 [kN*m] *0 [mm] /37434.38 [mm2] )2 + (603.551 [kN] /6
+ 55.074 [kN*m] *41.25 [mm] /37434.38 [mm2] )2)0.5 = 179.664 [kN]
Ri = ((Px/n + Mecc*yi/Ibg)2 + (Py/n + Mecc*xi/Ibg)2)0.5 = ((-475.022 [kN] /6 + 55.074 [kN*m] *82.5 [mm] /37434.38 [mm2] )2 + (603.551
[kN] /6 + 55.074 [kN*m] *-41.25 [mm] /37434.38 [mm2] )2)0.5 = 58.083 [kN]
Ri = ((Px/n + Mecc*yi/Ibg)2 + (Py/n + Mecc*xi/Ibg)2)0.5 = ((-475.022 [kN] /6 + 55.074 [kN*m] *82.5 [mm] /37434.38 [mm2] )2 + (603.551
[kN] /6 + 55.074 [kN*m] *41.25 [mm] /37434.38 [mm2] )2)0.5 = 166.71 [kN]

Bolt bearing [kN] 318.06 257.35 LC-22-8 0.81 Cl. 10.3.4

kb = min(e1/(3*d0), p/(3*d0) - 0.25, fub/fu, 1.0) = min(40 [mm] /(3*33 [mm] ), 82.5 [mm] /(3*33 [mm] ) - 0.25, 800 [N/mm2] /410
[N/mm2] , 1.0) = 0.404 Cl. 10.3.4
Vnpb = 2.5*kb*d*t*fu = 2.5*0.404*30 [mm] *32 [mm] *410 [N/mm2] = 397.576 [kN] Cl. 10.3.4
Vdpb = Vnpb/mb = 397.576 [kN] /1.25 = 318.061 [kN] Cl. 10.3.4
Ri = ((Px/n + Mecc*yi/Ibg) + (Py/n + Mecc*xi/Ibg) ) = ((-475.022 [kN] /6 + 55.074 [kN*m] *-82.5 [mm] /37434.38 [mm2] )2 + (603.551
2 2 0.5

[kN] /6 + 55.074 [kN*m] *-41.25 [mm] /37434.38 [mm2] )2)0.5 = 204.477 [kN]
Ri = ((Px/n + Mecc*yi/Ibg)2 + (Py/n + Mecc*xi/Ibg)2)0.5 = ((-475.022 [kN] /6 + 55.074 [kN*m] *-82.5 [mm] /37434.38 [mm2] )2 + (603.551
[kN] /6 + 55.074 [kN*m] *41.25 [mm] /37434.38 [mm2] )2)0.5 = 257.351 [kN]
Ri = ((Px/n + Mecc*yi/Ibg)2 + (Py/n + Mecc*xi/Ibg)2)0.5 = ((-475.022 [kN] /6 + 55.074 [kN*m] *0 [mm] /37434.38 [mm2] )2 + (603.551 [kN] /6
+ 55.074 [kN*m] *-41.25 [mm] /37434.38 [mm2] )2)0.5 = 88.658 [kN]
Ri = ((Px/n + Mecc*yi/Ibg)2 + (Py/n + Mecc*xi/Ibg)2)0.5 = ((-475.022 [kN] /6 + 55.074 [kN*m] *0 [mm] /37434.38 [mm2] )2 + (603.551 [kN] /6
+ 55.074 [kN*m] *41.25 [mm] /37434.38 [mm2] )2)0.5 = 179.664 [kN]
Ri = ((Px/n + Mecc*yi/Ibg)2 + (Py/n + Mecc*xi/Ibg)2)0.5 = ((-475.022 [kN] /6 + 55.074 [kN*m] *82.5 [mm] /37434.38 [mm2] )2 + (603.551
[kN] /6 + 55.074 [kN*m] *-41.25 [mm] /37434.38 [mm2] )2)0.5 = 58.083 [kN]
Ri = ((Px/n + Mecc*yi/Ibg)2 + (Py/n + Mecc*xi/Ibg)2)0.5 = ((-475.022 [kN] /6 + 55.074 [kN*m] *82.5 [mm] /37434.38 [mm2] )2 + (603.551
[kN] /6 + 55.074 [kN*m] *41.25 [mm] /37434.38 [mm2] )2)0.5 = 166.71 [kN]

Block tearing [kN] 1593.19 603.55 LC-22-8 0.38 Cl. 6.4.1

Av = h*t = 205 [mm] *32 [mm] = 6560 [mm2] Cl. 8.4.1

Avn = t*(h - e1 - (n1 - 0.5)*d0) = 32 [mm] *(245 [mm] - 40 [mm] - (3 - 0.5)*33 [mm] ) = 3920 [mm2] Cl. 6.4.1
IsSingleLineOfBoltsFalse
Atg = tw*(p2 + e2) = 32 [mm] *(82.5 [mm] + 50 [mm] ) = 4240 [mm2]
IsSingleLineOfBoltsFalse
Atn = t*(p2 + e2 - 3*d0/2) = 32 [mm] *(82.5 [mm] + 50 [mm] - 3*33 [mm] /2) = 2656 [mm2] Cl. 6.4.1
Tdb = min(Avg*fy/(30.5*m0) + 0.9*Atn*fu/m1, 0.9*Avn*fu/(30.5*m1) + Atg*fy/m0) = min(6560 [mm2] *240 [N/mm2] /(30.5*1.1) + 0.9*2656 [mm2]
*410 [N/mm2] /1.25, 0.9*3920 [mm2] *410 [N/mm2] /(30.5*1.25) + 4240 [mm2] *240 [N/mm2] /1.1) = 1593.19 [kN]
Cl. 6.4.1

Shear at gross section [kN] 777.63 603.55 LC-22-8 0.78 SCI P358 p.118, Cl.
8.4

Av = h*t = 245 [mm] *32 [mm] = 7840 [mm2] Cl. 8.4.1

Vng = Av*fy/(1.27*(3)0.5) = 7840 [mm2] *240 [N/mm2] /(1.27*(3)0.5) = 855.388 [kN] SCI P358 p.118
Vdg = Vng/m0 = 855.388 [kN] /1.1 = 777.625 [kN] Cl. 8.4

Shear at net section [kN] 884.74 603.55 LC-22-8 0.68 Cl. 8.4

An = t*(h - n1*d0) = 32 [mm] *(245 [mm] - 3*33 [mm] ) = 4672 [mm2] Cl. 6.3.1
Vdn = An*fu/((3)0.5*m1) = 4672 [mm2] *410 [N/mm2] /((3)0.5*1.25) = 884.741 [kN] Cl. 8.4

Shear due to bending [kN*m] 69.85 55.07 LC-22-8 0.79 Cl. 8.2.1.2

z = zp + (n2 - 1)*p2/2 = 50 [mm] + (2 - 1)*82.5 [mm] /2 = 91.25 [mm]

hp < 2.73*z 1
Ze = b*h2/6 = 32 [mm] *245 [mm] 2/6 = 3.20E+05 [mm3]
Mcd = Ze*fy/m0 = 3.20E+05 [mm3] *240 [N/mm2] /1.1 = 69.847 [kN*m] Cl. 8.2.1.2
z = zp + (n2 - 1)*p2/2 = 50 [mm] + (2 - 1)*82.5 [mm] /2 = 91.25 [mm]

Tension at net section [kN] 1379.17 475.02 LC-22-8 0.34 Cl. 6.3

Anet = t*(h - d0*n1) = 32 [mm] *(245 [mm] - 33 [mm] *3) = 4672 [mm2]
Tdn = 0.9*An*fu/m1 = 0.9*4672 [mm2] *410 [N/mm2] /1.25 = 1379.17 [kN] Cl. 6.3

Block tearing due to tension [kN] 1691.29 475.02 LC-22-8 0.28 Cl. 6.4.1

Atg = t*((n1 - 1)*p1 + e1) = 32 [mm] *((3 - 1)*82.5 [mm] + 0 [mm] ) = 5280 [mm2]
Avg = 2*t*(e2 + p2*(n2 - 1)) = 2*32 [mm] *(50 [mm] + 82.5 [mm] *(2 - 1)) = 8480 [mm2]
Atn = t*((n1 - 1)*(p1 - d0)) = 32 [mm] *((3 - 1)*(82.5 [mm] - 33 [mm] )) = 3168 [mm2]
Avn = 2*t*(e2 + (p2 - d0)*(n2 - 1) - 0.5*d0) = 2*32 [mm] *(50 [mm] + (82.5 [mm] - 33 [mm] )*(2 - 1) - 0.5*33 [mm] ) = 5312 [mm2]
Tdb = min(Avg*fy/(30.5*m0) + 0.9*Atn*fu/m1, 0.9*Avn*fu/(30.5*m1) + Atg*fy/m0) = min(8480 [mm2] *240 [N/mm2] /(30.5*1.1) + 0.9*3168 [mm2]
*410 [N/mm2] /1.25, 0.9*5312 [mm2] *410 [N/mm2] /(30.5*1.25) + 5280 [mm2] *240 [N/mm2] /1.1) = 2003.4 [kN] Cl. 6.4.1
Atg = t*((n1 - 1)*p1 + e1) = 32 [mm] *((3 - 1)*82.5 [mm] + 40 [mm] ) = 6560 [mm2]
Avg = t*(e2 + p2*(n2 - 1)) = 32 [mm] *(50 [mm] + 82.5 [mm] *(2 - 1)) = 4240 [mm2]
Atn = t*((n1 - 1)*(p1 - d0) - 0.5*d0 + e1) = 32 [mm] *((3 - 1)*(82.5 [mm] - 33 [mm] ) - 0.5*33 [mm] + 40 [mm] ) = 3920 [mm2]
Avn = t*(e2 + (p2 - d0)*(n2 - 1) - 0.5*d0) = 32 [mm] *(50 [mm] + (82.5 [mm] - 33 [mm] )*(2 - 1) - 0.5*33 [mm] ) = 2656 [mm2]
Tdb = min(Avg*fy/(30.5*m0) + 0.9*Atn*fu/m1, 0.9*Avn*fu/(30.5*m1) + Atg*fy/m0) = min(4240 [mm2] *240 [N/mm2] /(30.5*1.1) + 0.9*3920 [mm2]
*410 [N/mm2] /1.25, 0.9*2656 [mm2] *410 [N/mm2] /(30.5*1.25) + 6560 [mm2] *240 [N/mm2] /1.1) = 1691.29 [kN]
Cl. 6.4.1

Beam
Bolt bearing [kN] 330.05 257.35 LC-22-8 0.78 Cl. 10.3.4

kb = min(e1/(3*d0), p/(3*d0) - 0.25, fub/fu, 1.0) = min(93.75 [mm] /(3*33 [mm] ), 82.5 [mm] /(3*33 [mm] ) - 0.25, 800 [N/mm2] /410
[N/mm2] , 1.0) = 0.583 Cl. 10.3.4
 Vnpb = 2.5*kb*d*t*fu = 2.5*0.583*30 [mm] *23 [mm] *410 [N/mm2] = 412.563 [kN] Cl. 10.3.4
Vdpb = Vnpb/mb = 412.563 [kN] /1.25 = 330.05 [kN] Cl. 10.3.4
Ri = ((Px/n + Mecc*yi/Ibg)2 + (Py/n + Mecc*xi/Ibg)2)0.5 = ((-475.022 [kN] /6 + 55.074 [kN*m] *-82.5 [mm] /37434.38 [mm2] )2 + (603.551
[kN] /6 + 55.074 [kN*m] *-41.25 [mm] /37434.38 [mm2] )2)0.5 = 204.477 [kN]
Ri = ((Px/n + Mecc*yi/Ibg)2 + (Py/n + Mecc*xi/Ibg)2)0.5 = ((-475.022 [kN] /6 + 55.074 [kN*m] *-82.5 [mm] /37434.38 [mm2] )2 + (603.551
[kN] /6 + 55.074 [kN*m] *41.25 [mm] /37434.38 [mm2] )2)0.5 = 257.351 [kN]
Ri = ((Px/n + Mecc*yi/Ibg)2 + (Py/n + Mecc*xi/Ibg)2)0.5 = ((-475.022 [kN] /6 + 55.074 [kN*m] *0 [mm] /37434.38 [mm2] )2 + (603.551 [kN] /6
+ 55.074 [kN*m] *-41.25 [mm] /37434.38 [mm2] )2)0.5 = 88.658 [kN]
Ri = ((Px/n + Mecc*yi/Ibg)2 + (Py/n + Mecc*xi/Ibg)2)0.5 = ((-475.022 [kN] /6 + 55.074 [kN*m] *0 [mm] /37434.38 [mm2] )2 + (603.551 [kN] /6
+ 55.074 [kN*m] *41.25 [mm] /37434.38 [mm2] )2)0.5 = 179.664 [kN]
Ri = ((Px/n + Mecc*yi/Ibg)2 + (Py/n + Mecc*xi/Ibg)2)0.5 = ((-475.022 [kN] /6 + 55.074 [kN*m] *82.5 [mm] /37434.38 [mm2] )2 + (603.551
[kN] /6 + 55.074 [kN*m] *-41.25 [mm] /37434.38 [mm2] )2)0.5 = 58.083 [kN]
Ri = ((Px/n + Mecc*yi/Ibg)2 + (Py/n + Mecc*xi/Ibg)2)0.5 = ((-475.022 [kN] /6 + 55.074 [kN*m] *82.5 [mm] /37434.38 [mm2] )2 + (603.551
[kN] /6 + 55.074 [kN*m] *41.25 [mm] /37434.38 [mm2] )2)0.5 = 166.71 [kN]

Shear at gross section [kN] 1116.04 603.55 LC-22-8 0.54 Cl. 8.4.1, Cl. 8.4

Av = Max(Ag - bfTop*tfTop - bfBottom*tfBottom + ((tw + 2*rb,top)*tfTop/2) + ((tw + 2*rb,bottom)*tfBottom/2), hw*tw) = Max(30578.7 [mm2] - 318.4 [mm] *37.7
[mm] - 318.4 [mm] *37.7 [mm] + ((23 [mm] + 2*18.85 [mm] )*37.7 [mm] /2) + ((23 [mm] + 2*18.85 [mm] )*37.7 [mm] /2), 277.1
[mm] *23 [mm] ) = 8859.73 [mm2]
Vng = Av*fy/(3)0.5 = 8859.73 [mm2] *240 [N/mm2] /(3)0.5 = 1227.64 [kN] Cl. 8.4.1
Vdg = Vng/m0 = 1227.64 [kN] /1.1 = 1116.04 [kN] Cl. 8.4

Shear at net section [kN] 1246.58 603.55 LC-22-8 0.48 Cl. 8.4

Av = Max(Ag - bfTop*tfTop - bfBottom*tfBottom + ((tw + 2*rb,top)*tfTop/2) + ((tw + 2*rb,bottom)*tfBottom/2), hw*tw) = Max(30578.7 [mm2] - 318.4 [mm] *37.7
[mm] - 318.4 [mm] *37.7 [mm] + ((23 [mm] + 2*18.85 [mm] )*37.7 [mm] /2) + ((23 [mm] + 2*18.85 [mm] )*37.7 [mm] /2), 277.1
[mm] *23 [mm] ) = 8859.73 [mm2]
Av,net = Av - n1*d0*tw = 8859.73 [mm2] - 3*33 [mm] *23 [mm] = 6582.73 [mm2]
Vdn = An*fu/((3)0.5*m1) = 6582.73 [mm2] *410 [N/mm2] /((3)0.5*1.25) = 1246.58 [kN] Cl. 8.4

Tension [kN] 991.28 475.02 LC-22-8 0.48 Cl. 6.3

An = (b - n*dh)*t = (245 [mm] - 3*33 [mm] )*23 [mm] = 3358 [mm2] Cl. 6.3
Tdn = 0.9*An*fu/m1 = 0.9*3358 [mm2] *410 [N/mm2] /1.25 = 991.282 [kN] Cl. 6.3

Block tearing due to tension [kN] 1382.00 475.02 LC-22-8 0.34 Cl. 6.4.1

Atn = t*((n1 - 1)*(p1 - d0)) = 23 [mm] *((3 - 1)*(82.5 [mm] - 33 [mm] )) = 2277 [mm2]
Avn = 2*t*(e2 + (p2 - d0)*(n2 - 1) - 0.5*d0) = 2*23 [mm] *(40 [mm] + (82.5 [mm] - 33 [mm] )*(2 - 1) - 0.5*33 [mm] ) = 3358 [mm2]
Avg = 2*t*(e2 + p2*(n2 - 1)) = 2*23 [mm] *(40 [mm] + 82.5 [mm] *(2 - 1)) = 5635 [mm2]
Atg = t*((n1 - 1)*p1 + e1) = 23 [mm] *((3 - 1)*82.5 [mm] + 0 [mm] ) = 3795 [mm2]
Tdb = min(Avg*fy/(30.5*m0) + 0.9*Atn*fu/m1, 0.9*Avn*fu/(30.5*m1) + Atg*fy/m0) = min(5635 [mm2] *240 [N/mm2] /(30.5*1.1) + 0.9*2277 [mm2]
*410 [N/mm2] /1.25, 0.9*3358 [mm2] *410 [N/mm2] /(30.5*1.25) + 3795 [mm2] *240 [N/mm2] /1.1) = 1382 [kN] Cl. 6.4.1

Plate (support side)

Weld capacity [kN/m2] 189370.89 133906.24 LC-22-8
0.71 Cl. 10.5.7.1.1, Cl. 10.5.10.1.1

fwn = fu/(30.5) = 410 [N/mm2] /(30.5) = 236.714 [N/mm2] Cl. 10.5.7.1.1

fwd = fwn/mw = 236.714 [N/mm2] /1.25 = 189.371 [N/mm2] Cl. 10.5.7.1.1
tt = 2 * (0.7*s) = 2 * (0.7*25 [mm] ) = 35 [mm] Cl. 10.5.3.1
q = P/(tt*lw) = 603.551 [kN] /(35 [mm] *245 [mm] ) = 70.385 [N/mm2] Cl. 10.5.9
tt = 2 * (0.7*s) = 2 * (0.7*25 [mm] ) = 35 [mm] Cl. 10.5.3.1
fa = P/(tt*lw) = -475.022 [kN] /(35 [mm] *245 [mm] ) = -55.396 [N/mm2] Cl. 10.5.9
fe = (fa2 + 3*q2)0.5 = (-55.396 [N/mm2] 2 + 3*70.385 [N/mm2] 2)0.5 = 133.906 [N/mm2] Cl. 10.5.10.1.1

Global critical strength ratio 0.99

NOTES
Some verifications for this connection are not available in IS 800-2007 and thus, they have been calculated with NA to BS EN
1993-1-8:2005

NOTATION
Ag : Gross area of cross section
An : Net area of the total cross-section
Anb : Net shear area of the bolt at threads
Anet : Net area in tension
Asb : Nominal plain shank area of the bolt
Atg : Minimum gross area in tension from the bolt hole perpendicular to the line of force
Atn : Minimum net area in tension from the bolt hole perpendicular to the line of force
Av : Shear area
Avg : Minimum gross area in shear along bolt line parallel to external force
Avn : Minimum net area in shear along bolt line parallel to external force
Av,net : Net shear area
b : Depth of the plate
b : Width of the plate
bfBottom : Bottom flange width
bfTop : Top flange width
CorrosionExposed : Members are exposed to corrosive influences
d : Nominal bolt diameter
d0 : Diameter of the bolt hole
dh : Diameter of bolt hole
dnb : Bottom notch height
dnt : Top notch height
e1 : End distance
e2 : Edge distance
emax : Maximum edge distance
emin : Minimum edge distance
fa : Individual stress acting in fillet weld due to axial
fe : Equivalent stress
fu : Characteristic ultime tensile stress of the connected part
fub : Ultime tensile stress of the bolt
fu : Smaller of the ultimate stress of the weld or of the parent metal
fwd : Design strength of a fillet weld
fwn : Nominal strength of a fillet weld
fy : Characteristic yield stress of the connected part
m0 : Partial factor against yield stress and buckling
m1 : Partial factor against ultimate stress
mb : Partial factor for bolted connection with bearing type bolts
mw : Partial factor for strength of weld
hb : Height of the member
h : Height of the plate
hw : Clear depth between flanges
Ibg : Moment of inertia of bolt group
IsSingleLineOfBolts : Single line of bolts
kb : Bearing capacity factor
kbottom : Thickness of the bottom flange + root radius
ktop : Thickness of the top flange + root radius
Lmax : Maximum length
lw : Effective length of weld
Mcd : Design resistance for bending about one principal axis of a cross-section
Mecc : Moment due to force eccentricity
n : Number of bolts
n1 : Number of rows of bolts
n2 : Number of columns of bolts
nn : Number of shear planes with threads intercepting the shear plane
ns : Number of shear planes without threads intercepting the shear plane
p : Pitch distance
p1 : Vertical spacing between centres of bolts in a line in the load direction
p2 : Horizontal spacing between centres of bolts in adjacent lines perpendicular to the load direction
pmax : Maximum pitch
pmin : Minimum pitch
P : Force transmitted to welds
Px : Horizontal component of acting force
Py : Vertical component of acting force
q : Individual stress acting in fillet weld due to shear
rb,bottom : Root radius of the bottom flange beam section
rb,top : Root radius of the top flange beam section
Ri : Force acting on a bolt due to eccentric load
s : Weld size
ShearedEdges :Sheared or hand cut flame edges
t : Component thickness
Tdb : Block shear strength
Tdn : Design tension strength governed by rupture of net cross-sectional area
tfBottom : Bottom flange thickness
tfTop : Top flange thickness
tt : Effective throat thickness of weld
tw : Thickness of web
Vdg : Design shear strenght of the gross section
Vdn : Design shear strenght of the net section
Vdpb : Design bearing strength of a bolt
Vdsb : Design shear strength of a bolt
Vng : Nominal plastic shear resistance of the gross section
Vnpb : Nominal bearing strength of a bolt
Vnsb : Nominal shear capacity of a bolt
Ze : Elastic section modulus
xi : Abscissa of a bolt with respect to the center of gravity of the bolt group
yi : Ordinate of a bolt with respect to the center of gravity of the bolt group
z : Distance from support to centre of gravity of bolt group