Nitrogen N-5030 Filling
Nitrogen N-5030 Filling
Nitrogen N-5030 Filling
Gases: Nitrogen
Document Creation Date: 8/19/2021 6:49:23 AM UTC
Product information
1 nm3 = 1.147 kg
1 kg = 0.872 nm3
1 bar = 14.5 psi
1 nm3 = 35.3 ft3
1 kg = 2.2 lbs
The gas capacity of a cylinder can calculated in two different ways. The most simple method is the water capacity of the cylinder (in
litres) multipled by the actual pressure (in bar); the result is the capacity in litres. Although a simple method it is not the most
accurate method. A better but much more complex method will give a more accurate value for the gas capacity; it will take the
compressability of the gas at both 1 bar and at the actual pressure in consideration and all based on 15 degrees C. The result is often
quoted as normal litres or normal cubic metres (nm3). For nitrogen the more accurate method will give a slightly higher value as
compared to the simple method i.e. (10.2 m3 versus 10 nm3).
Features
Nitrogen is a colourless, odourless and tasteless
Non-combustible and non-toxic
Slightly lighter than air and it's an inert gas
Nitrogen is well suited for purging or flushing cargo tanks and pipelines of residual gases and vapours prior to loading cargo or
doing maintenance
It is also used as a 'blanket' on top of several types of cargoes to prevent reactions with oxygen from atmospheric air.
The filling pressure is lower in some locations than the normal 200 bar due to local rules and regulations that limit filling pressure.
Nitrogen 3.0 means > 99.9% pure and the impurities: Water (H2O) < 1000 ppm and Oxygen (O2) < 1000 ppm.
Benefits
Performance data
Documents
Nitrogen
Related products
Accessories
WASHER ALU
550160 REGULATOR
771713
10 PCS FOR OX 600
REGULATOR NITROGEN 0-
200 BAR
REGULATOR
510011 REGULATOR
510003
510 N2 FLOW 510 N2
0-1.3 L/MIN PRESSURE 0 -1
BAR
TROLLEY F/1
778147 REGULATOR
510002
40-50L GAS 510 N2
CYLINDER PRESSURE 0-
10 BAR