0% found this document useful (0 votes)
286 views2 pages

LiFi-XC Data Sheet & Snapshot

LiFi systems provide wireless connectivity using visible light communication (VLC) instead of radio frequencies. This allows for more secure, safer connectivity that can achieve 1000 times greater data density than WiFi. The pureLiFi LiFi-XC system offers a fully networked LiFi solution for deploying LiFi access points and supporting user mobility. LiFi provides benefits like security since light cannot pass through walls easily, safety since it avoids radio interference, and high data density by reducing shared bandwidth.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
286 views2 pages

LiFi-XC Data Sheet & Snapshot

LiFi systems provide wireless connectivity using visible light communication (VLC) instead of radio frequencies. This allows for more secure, safer connectivity that can achieve 1000 times greater data density than WiFi. The pureLiFi LiFi-XC system offers a fully networked LiFi solution for deploying LiFi access points and supporting user mobility. LiFi provides benefits like security since light cannot pass through walls easily, safety since it avoids radio interference, and high data density by reducing shared bandwidth.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Snapshot

LiFi systems provide


immersive connectivity
Connectivity is evolving. The spectrum now has to accommodate
more mobile users and a forecasted increase to 20 Billion IoT
devices by the year 2020.

It is time to future proof our networks to enable the connectivity


demands of tomorrow. With LiFi we can utilise spectrum more than
1000 times greater than the spectrum utilised for radio frequencies.
LiFi is begining to unlock unprecedented data and bandwidth.

Getting more from your


network with LiFi
Imagine every LED light in our offices, buildings and cities could
become a high speed, smart, and secure internet access point.

The pureLiFi LiFi-XC system offers partners the ability to deploy


a fully networked LiFi solution. LiFi-XC supports multiple access,
roaming, complete mobility and ease of use – providing a level

Benefits
of user experience that is comparable to existing wireless
technologies such as Wi-Fi with the added security, safety
and data density of visible light.

Security: Light can be contained in a physical space making LiFi


inherantly more secure. Users can see where data is going and

LiFi Deployment
there is less requirement for additional security.

Safety: Radio frequency technologies such as Wi-Fi cause


interference to electronic devices. LiFi is directional meaning LiFi products from pureLiFi are LED agnostic allowing for LiFi
interference is simpler to avoid and even prevent all together. technology to transform existing LED lighting infrastructures into
This means LiFi can be used in RF hostile zones. reliable, fast, secure and highly dense wireless networks.
The installation process is straightforward and flexible. LiFi backhaul
Data Density: LiFi offers a greater user experience as it reduces can be deployed using a standard mains powered solution.
the need to share wireless bandwidth with other users. The LiFi Access Point also supports PoE/PoE+ and Cisco UPOE
LiFi can achieve approximately 1000 times the data density of to minimise the cabling required for deploying the network.
Wi-Fi offering substantially more data per square metre. In addition to the standard lighting and LiFi functionality, the
LiFi-XC AP also allows the attached LED luminaire to be dimmed
Location Services: LiFi systems are fully networked and each using a proprietary control protocol over IP, DALI frames, or an
LiFi enabled light has it’s own IP address which means advanced analogue level where available.
geo fencing can be deployed simply in a LiFi network.
TR-069 remote management and automatic provisioning software
suite are also available to ease the deployment and management
Sixty percent of total mobile data traffic was offloaded from the of large LiFi networks.
fixed network through Wi-Fi or femtocell in 2016, making a total
of 10.7 exabytes of mobile data traffic offloaded each month. The LiFi-XC Station (STA) is USB powered to enable complete
mobility and ease of use. After installing the provided device driver,
If mobile data traffic continues to increase as expected the the system simply uses existing operating system tools for scanning
world will run out of RF spectrum before 2025. and connecting to LiFi-XC Access Points.

Downlink rate: 43 mbps


Uplink rate: 43 mbps

Next Steps
Visit www.purelifi.com or talk to your account manager to learn how you can harness light to power your connectivity needs.
At-a-Glance: Data Sheet

Features Access Point


• Fully networked LiFi system providing end-to end IP connectivity
Parameter Nominal Value Unit
Supply voltage 27 - 57 VDC
• Full-duplex wireless link providing up to 43 Mbps in downlink and uplink
Data interface Gigabit Ethernet Port -

• A single access point (AP) supports up to 8 stations (STAs) Driver box interface 10-way Micro-Fit 3.0 connector -

Power input 2-way Microfit 3.0 connector -


• PoE/PoE+ and Cisco UPOE support
Stand-by power consumption 4 W

• Capable of working with a range of LED luminaires Max. active power consumtion 8 W

Remote management TR-069, SNMP, v3 -


• TR-069 remote management as well as SNMP v3
Status LED indicator Tristate - red, orange, green -
• DALI building management support Unit size 88 x 88 x 20 mm

Unit weight 200 g


• Analog dimming control interface
Operating Temperture 0 - 35 °
C
• EnergyWise support
Humidity (Non-condensing) 20 - 95 %

• Proprietary protocol for power management/dimming

• pureLiFi user roaming between APs on the same subnet

• USB 2.0 powered STA unit allows complete mobility

• Supports WPA2-Personal and Enterprise (802.1X) authentication


TX Driver
• Compact design for improved mobility and handling
Parameter Nominal Value Unit
Min lamp voltage 2 VDC
• Link status Max lamp voltage 55 VDC

Max DC lamp current 700 mA

AP interface 10-way MicroFit-3.0 connector -

Lamp connector 3-way push-in -

Lamp wire cross-section area 0.05 - 1.31 mm ²

Complete System
Lamp wire gauge 30-16 AWG

Stand-by power consumption 4 (excluding lamp) W

Max. active power consumption 4.2 W

Parameter Nominal Value Unit Unit size 74 x 55 x 32 mm

Unit weight 124 g


Downlink line rate (max.): 43 Mbps
Operating Temperture -10 - 45 °
C
Uplink line rate (max.): 43 Mbps
Humidity (Non-condensing) 20 - 95 %
Minimum operational distance 1.0 m

Maximum operational distance 6.0 m

Maximum concurrent users 8 -

Station
Inter-AP handover (roaming) Supported -

Atto-Cell Diameter @ 2.5m range 2.8 m

Atto-Cell Diameter @ 3m range 3.5 m

Parameter Nominal Value Unit


Data interface USB 2.0 -

Max. power consumption 2.5 W

Unit Size 85 x 29.4 x 10.2 mm

Unit weight 42 g

Operating temperature 0 - 35 °
C

Humidity (Non-condensing) 20 – 95 %

You might also like