Mass Product Data Sheet
Mass Product Data Sheet
Mass Product Data Sheet
3. Prime : Apply one coat of ROXIT PAINTS INTERIOR PRIMER by thinning HEAVY METALS
with potable water in the ratio of 2:1. Allow to dry for 4-6 hours. COSMO Mass Interior Emulsion is free
4. TopCoat : Apply 2-3 coats by diluting 1Litre of COSMO Mass Interior from lead, chromium (VI), cadmium,
Emulsion with a maximum of 500-600 ml of water. A gap of 4-6 hours mercury and its compounds.
should be given between 2 coats.
Technical Data :-
HAZARDOUS CHEMICALS
1. Recommended Diluent : Potable Water COSMO Mass Interior Emulsion does not
2. Recommended Surfaces : Sand / Cement Plaster, asbestos, brick work, contain harmful
concrete block and fibre board compounds like formal dehyde,
3. Coverage Area : 110-120sq.ft / litre / 2 coat depending on surface phenolic compounds, benzene, etc.
roughness.
4. Method of Application: Brush, Roller or Spray
5. DilutionRatio:450-550 ml potable water / Ltr of emulsion
6. No of coats : 2-3
7. Drying Time : Surface dry - 20mins, Hard dry - 4hrs, Recoating time - 6 -
8 hrs
SPEED PAINTS
8. Gloss Level : Matt finish sheen levels of 2-4 @60 deg gloss head on AND PUTTY
glass panel Prashanthi Nagar, Kukatpally,Hyderabad -
9. Flash Point : 100 % water based hence NR 500072
10. Fire Hazard Class : Non Flammable Contact : 92462 91285 / 957636329
11. Pot Life : Best used before 24 hrs post dilution. Lid to be kept air tight
when not in use.
12. Density:1.45-1.55