DPM 7205EW: EOC Polymers India Pvt. LTD

EOC Polymers India Pvt. Ltd.
CIN: U25199DL2006PTC145680
Date of issue: 04.11.2020
DPM 7205EW
Product description: DPM 7205EW is a waterbased compound based on speciality

polymers.DPM 7205EW is a white pigmented compound, designed to
use as a liquid applied water proofing membrane for outdoor
applications, expecially on building roofs. The dried films have low
water absorbance charactor along with good water repellant
properties
Specifications:
Total Solids, %, 62.0 – 64.0 %
Viscosity 12000 – 18000 cps

(BROOKFIELD RVF 4/20)
pH 6.0 – 8.0
Density 1.0 – 1.20
Sieve Analysis No Bits at 1000 µm
Colour Off-white
Emulsifying system Anionic-nonionic
Film Surface Non tacky and Water repellant
Application: This product is used as a liquid applied water and damp proofing
membrane and can be brush or roller applied on surfaces that are
cleaned well.
A high pressure water jet cleaning is recommended before applying

DPM 7205 EW. It should not be used directly on a higly water soaked
surface; allow the surface to dry gently prior to the application.
Recommended to apply initial coating (first layer) diluted with 10 %

water after proper mixing or can use EOC’s Primer compound first. It
is advised to apply a minimum dry thickness of 0.4 – 0.5 mm in two to
three coats each with a total coverage of approx. 0.7 kg compound
per m². The second coat is applied only when the first coat is touch
dry: this is usually possible in 1 to 2 hour after applying the first coat.
The compound dries fast and results in a white membrane with high
strength and flexibility.
note: All recommendations for use of our products, whether given by us in writing, orally, or to be implied from the results of tests carried out by us,
are based on the current state of our knowledge at the time such recommendations are made. As additional information is learned, these
recommendations may be updated. They may also be impacted by circumstances outside our control. Notwithstanding any such recommendations,
the user shall remain responsible for satisfying himself that the product as supplied by us are suitable for his intended process or purpose. Since we
cannot control the application, use or processing of the products, we cannot accept responsibility therefor. The user shall ensure that the intended
use of the products will not infringe any third party’s intellectual property right
EOC Polymers India Pvt. Ltd - Registered Office: A-220, Defence Colony, New Delhi, India, 110024
Site 1 : Plot No. 474A & 474B, HSIIDC, Industrial Estate, Phase 1 Barhi, Dist. Sonepat, Haryana, India -131101
Site 2 : Plot No. 833, GIDC Industrial Est, Jhagadia, Opp. Gujarat Gas, Near Getco Substation, Dist. Bharuch,
Gujarat India - 393110,
Phone : +91 130 247 47 31 - Fax: +91 130 247 47 32
[email protected] www.eocgroup.com
EOC Polymers India Pvt. Ltd.
CIN: U25199DL2006PTC145680
It can also be used as a paint coating for the exterior wall where we
need excellent water barrier and water repellant properties.
It is good to use this compound in sandwich applications with suitable

glass fibre mesh preferably having 45 GSM for getting better
durability.
Tensile Properties: 5 – 40°C
Storage: 5 – 40°C
Shelf-life: 6 months (in original closed packaging)
Tensile Properties
Tensile Strength : 3.5 MPa
Elongation at Break : 420 %
Modulus 100 % elongation : 2.2 MPa
note: All recommendations for use of our products, whether given by us in writing, orally, or to be implied from the results of tests carried out by us,
are based on the current state of our knowledge at the time such recommendations are made. As additional information is learned, these
recommendations may be updated. They may also be impacted by circumstances outside our control. Notwithstanding any such recommendations,
the user shall remain responsible for satisfying himself that the product as supplied by us are suitable for his intended process or purpose. Since we
cannot control the application, use or processing of the products, we cannot accept responsibility therefor. The user shall ensure that the intended
use of the products will not infringe any third party’s intellectual property right
EOC Polymers India Pvt. Ltd - Registered Office: A-220, Defence Colony, New Delhi, India, 110024
Site 1 : Plot No. 474A & 474B, HSIIDC, Industrial Estate, Phase 1 Barhi, Dist. Sonepat, Haryana, India -131101
Site 2 : Plot No. 833, GIDC Industrial Est, Jhagadia, Opp. Gujarat Gas, Near Getco Substation, Dist. Bharuch,
Gujarat India - 393110,
Phone : +91 130 247 47 31 - Fax: +91 130 247 47 32
[email protected] www.eocgroup.com

DPM 7205EW: EOC Polymers India Pvt. LTD

Uploaded by

Copyright:

Available Formats

DPM 7205EW: EOC Polymers India Pvt. LTD

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

DPM 7205EW: EOC Polymers India Pvt. LTD

Uploaded by

Copyright:

Available Formats

EOC Polymers India Pvt. Ltd.

Date of issue: 04.11.2020

Product description: DPM 7205EW is a waterbased compound based on speciality

Total Solids, %, 62.0 – 64.0 %

Viscosity 12000 – 18000 cps

Density 1.0 – 1.20

Sieve Analysis No Bits at 1000 µm

A high pressure water jet cleaning is recommended before applying

Recommended to apply initial coating (first layer) diluted with 10 %

It is good to use this compound in sandwich applications with suitable

Tensile Properties: 5 – 40°C

Shelf-life: 6 months (in original closed packaging)

Tensile Strength : 3.5 MPa

Elongation at Break : 420 %

Modulus 100 % elongation : 2.2 MPa

You might also like