Scribd Logo
Upload

Welcome to Scribd!

  • 480 views

    Technical Data Sheet For Air Washer Unit 10000 CFM AND 25000 CFM

    Uploaded by

    Support aeronom
    The document provides specifications for two air washer units with capacities of 10,000 CFM and 25,000 CFM. Both units use galvanized iron for exterior and interior panels, polyurethane foam insulation, Nicotra or Kruger backward curved blowers, and ABB or Crompton totally enclosed fan cooled electric motors. Key components include self-aligned bearings, taper lock pulleys, cellulose cooling pads, PVC eliminators, and pre-filters made of aluminum wire mesh.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Technical Data Sheet For Air Washer Unit 10000 CFM AND 25000 CFM

    Uploaded by

    Support aeronom
    480 views3 pages
    The document provides specifications for two air washer units with capacities of 10,000 CFM and 25,000 CFM. Both units use galvanized iron for exterior and interior panels, polyurethane foam insulation, Nicotra or Kruger backward curved blowers, and ABB or Crompton totally enclosed fan cooled electric motors. Key components include self-aligned bearings, taper lock pulleys, cellulose cooling pads, PVC eliminators, and pre-filters made of aluminum wire mesh.

    Original Title

    Technical Data Sheet for Air Washer Unit 10000 CFM AND 25000 CFM (1)

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides specifications for two air washer units with capacities of 10,000 CFM and 25,000 CFM. Both units use galvanized iron for exterior and interior panels, polyurethane foam insulation, Nicotra or Kruger backward curved blowers, and ABB or Crompton totally enclosed fan cooled electric motors. Key components include self-aligned bearings, taper lock pulleys, cellulose cooling pads, PVC eliminators, and pre-filters made of aluminum wire mesh.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    480 views3 pages

    Technical Data Sheet For Air Washer Unit 10000 CFM AND 25000 CFM

    Uploaded by

    Support aeronom
    The document provides specifications for two air washer units with capacities of 10,000 CFM and 25,000 CFM. Both units use galvanized iron for exterior and interior panels, polyurethane foam insulation, Nicotra or Kruger backward curved blowers, and ABB or Crompton totally enclosed fan cooled electric motors. Key components include self-aligned bearings, taper lock pulleys, cellulose cooling pads, PVC eliminators, and pre-filters made of aluminum wire mesh.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 3

    DATA SHEET FOR 10000 CFM AIR WASHER UNIT

    EQUIPMENT DESCRIPTION AERONOM EQUIPMENTS AND PROJECT


    HOUSING
    MOC of Outer panel Sheet 0.6 MM G.I. Pre coated Sheet
    MOC of Inner panel Sheet 0.6 MM G.I. Sheet
    PUF Thickness 25 MM
    Density 40 Kg / M³
    BLOWER
    Blower Material Sheet Steel and Angle Iron
    Air Flow 10000 CFM
    Type of Blower DIDW Backward Curved
    Static Pressure 55 mmwg
    Blower Make Nicotra / Kruger Make
    BLOWER MOTOR
    Motor Type Totally Enclosed Fan Cooled (TEFC)
    Volts-Phase –Hz 415 volts ±10% - 3 phase- 50 Hz
    Rated H.P. / RPM 7.5 H.P. / 4 Pole
    Motor Make Crompton / ABB
    DRIVE
    Bearing Self-Aligned
    Type Belt Driven
    Pulley and Belts 2 – B Section
    Pulley Type Tapper Lock
    COOLING SECTION
    Water distribution Through GI Splashier
    Cellulose Paper Make Any Reputed Make
    Cellulose paper req. 20 Sq. Ft
    Pad depth 200 mm
    Efficiency 80 - 90%
    PVC ELIMINATOR
    PVC Eliminator Req. 20 Sq. Ft
    WATER PUMP
    Pump Make CRI/CG/Any Reputed Make
    FILTER SECTION
    PRE – FILTERS
    Efficiency 90% down to 40 
    Frame G.I Sheet
    Media Al. Wire Mesh
    Filtration area req. 20 Sq. Ft
    Filter frame req. 20 Sq. Ft
    DATA SHEET FOR 25000 CFM AIR WASHER UNIT
    EQUIPMENT DESCRIPTION AERONOM EQUIPMENTS AND PROJECT
    HOUSING
    MOC of Outer panel Sheet 0.6 MM G.I. Pre coated Sheet

    MOC of Inner panel Sheet 0.6 MM G.I. Sheet

    PUF Thickness 25 MM

    Density 40 Kg / M³

    BLOWER

    Blower Material Sheet Steel and Angle Iron

    Air Flow 25000 CFM

    Type of Blower DIDW Backward Curved

    Static Pressure 60 mmwg

    Blower Make Nicotra / Kruger Make

    BLOWER MOTOR

    Motor Type Totally Enclosed Fan Cooled (TEFC)

    Volts-Phase –Hz 415 volts ±10% - 3 phase- 50 Hz

    Rated H.P. / RPM 15.0 H.P. / 4 Pole

    Motor Make Crompton / ABB


    DRIVE

    Bearing Self-Aligned

    Type Belt Driven

    Pulley and Belts 3 – B Section

    Pulley Type Tapper Lock


    COOLING SECTION
    Water distribution Through GI Splashier
    Cellulose Paper Make Any Reputed Make
    Cellulose paper req. 50 Sq. Ft
    Pad depth 200 mm
    Efficiency 80 - 90%
    PVC ELIMINATOR
    PVC Eliminator Req. 50 Sq. Ft
    WATER PUMP
    Pump Make CRI/CG/Any Reputed Make
    FILTER SECTION
    PRE – FILTERS
    Efficiency 90% down to 40 
    Frame G.I Sheet
    Media Al. Wire Mesh
    Filtration area req. 50 Sq. Ft
    Filter frame req. 50 Sq. Ft

    AIR WASHER UNIT

    NICOTRA MAKE BLOWER ABB MAKE ELECTRIC MOTOR TAPPER LOCK PULLEY

    FENNER MAKE BELTS CELLULOSE COOLING PAD PVC ELIMINATOR

    You might also like