<6>Booting Linux on physical CPU 0x0

<6>Initializing cgroup subsys cpu

<5>Linux version 3.18.20-SVN:9140 (jenkins@d7a4a3be6de8) (gcc version 4.9.4
20150629 (prerelease) (Hisilicon_v600_20170329) ) #1 SMP Sat Jul 21 09:56:30 CST
2018
<6>CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
<6>CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<6>Machine model: Hisilicon HI3520DV400 DEMO Board
<6>Memory policy: Data cache writealloc
<7>On node 0 totalpages: 37632
<7>free_area_init_node: node 0, pgdat 805debc0, node_mem_map 890cf000
<7> Normal zone: 292 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 37376 pages, LIFO batch:7
<7> HighMem zone: 2 pages used for memmap
<7> HighMem zone: 256 pages, LIFO batch:0
<6>PERCPU: Embedded 9 pages/cpu @890b4000 s5696 r8192 d22976 u36864
<7>pcpu-alloc: s5696 r8192 d22976 u36864 alloc=9*4096
<7>pcpu-alloc: [0] 0 [0] 1
<4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 37340
<5>Kernel command line: mem=147M console=ttyAMA0,115200 root=/dev/mtdblock3
rootfstype=squashfs load_modules=1 mac_info=82372 env_off=4194304 env_size=131072
logoaddr=85200000 logosize=100000 secerase=0 parameter=1
<4>selected_console -1
<6>PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>Memory: 142708K/150528K available (4299K kernel code, 198K rwdata, 1284K rodata,
200K init, 286K bss, 7820K reserved, 1024K highmem)
<5>Virtual kernel memory layout:
<5> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5> fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
<5> vmalloc : 0x89800000 - 0xff000000 (1880 MB)
<5> lowmem : 0x80000000 - 0x89300000 ( 147 MB)
<5> pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
<5> modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
<5> .text : 0x80008000 - 0x8057bea4 (5584 kB)
<5> .init : 0x8057c000 - 0x805ae000 ( 200 kB)
<5> .data : 0x805ae000 - 0x805df880 ( 199 kB)
<5> .bss : 0x805df880 - 0x806270c4 ( 287 kB)
<6>SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>Hierarchical RCU implementation.
<6> RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
<6>NR_IRQS:16 nr_irqs:16 16
<6>sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns
<6>Console: colour dummy device 80x30
<6>console [tty0] enabled
<6>Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>CPU: Testing write buffer coherency: ok
<4>open /mnt/mtd/Config/error_trap_file fail
<6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>Setting up static identity map for 0x8041a498 - 0x8041a4f0
<4>CPU1: Booted secondary processor
<6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>Brought up 2 CPUs
<6>SMP: Total of 2 processors activated (3981.31 BogoMIPS).
<6>CPU: All CPU(s) started in SVC mode.
<6>devtmpfs: initialized
<6>VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
<6>pinctrl core: initialized pinctrl subsystem
<6>regulator-dummy: no parameters
<6>NET: Registered protocol family 16
<6>DMA: preallocated 256 KiB pool for atomic coherent allocations
<6>Serial: AMBA PL011 UART driver
<6>12080000.uart: ttyAMA0 at MMIO 0x12080000 (irq = 38, base_baud = 0) is a PL011
rev2
<4>uart-pl011 12090000.uart: aliased and non-aliased serial devices found in device
tree. Serial port enumeration may be unpredictable.
<6>12090000.uart: ttyAMA1 at MMIO 0x12090000 (irq = 39, base_baud = 0) is a PL011
rev2
<4>uart-pl011 120a0000.uart: aliased and non-aliased serial devices found in device
tree. Serial port enumeration may be unpredictable.
<6>120a0000.uart: ttyAMA2 at MMIO 0x120a0000 (irq = 40, base_baud = 0) is a PL011
rev2
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>Switched to clocksource timer00
<6>NET: Registered protocol family 2
<6>TCP established hash table entries: 2048 (order: 1, 8192 bytes)
<6>TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
<6>TCP: Hash tables configured (established 2048 bind 2048)
<6>TCP: reno registered
<6>UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>futex hash table entries: 512 (order: 3, 32768 bytes)
<6>squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>fuse init (API version 7.23)
<6>msgmni has been set to 276
<6>bounce: pool size: 64 pages
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
<6>io scheduler noop registered
<6>io scheduler deadline registered (default)
<6>io scheduler cfq registered
<4>dh_proc has been probed successfully!
<6>pinctrl-single 120f0000.pinmux: 234 pins at pa fe4f0000 size 936
<6>ahci 11010000.sata: SSS flag set, parallel bus scan disabled
<6>ahci 11010000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform
mode
<6>ahci 11010000.sata: flags: ncq sntf stag pm led clo only pmp fbs slum part ccc
sxs boh
<6>scsi host0: ahci_platform
<6>scsi host1: ahci_platform
<6>ata1: SATA max UDMA/133 mmio [mem 0x11010000-0x11010fff] port 0x100 irq 49
<6>ata2: SATA max UDMA/133 mmio [mem 0x11010000-0x11010fff] port 0x180 irq 49
<6>SPI Nand ID Table Version 2.4
<6>SPI Nand(cs 0) ID: 0xe5 0x71
<6>nand: device found, Manufacturer ID: 0xe5, Chip ID: 0x71
<6>nand: Unknown DS35Q1GAIBR
<6>nand: 128MiB, SLC, page size: 2048, OOB size: 64
<4>nand: NAND_ECC_NONE selected by board driver. This is not recommended!
<5>Creating 11 MTD partitions on "hinand":
<5>0x000000000000-0x000000080000 : "miniboot"
<5>0x000000080000-0x000000200000 : "updateboot"
<5>0x000000200000-0x000000600000 : "boot+env"
<5>0x000000600000-0x000001700000 : "rootfs"
<5>0x000001700000-0x000001a00000 : "hwid"
<5>0x000001a00000-0x000003300000 : "userfs"
<5>0x000003300000-0x000004200000 : "web"
<5>0x000004200000-0x000004400000 : "custom"
<5>0x000004400000-0x000004700000 : "logo"
<5>0x000004700000-0x000005100000 : "config"
<5>0x000005100000-0x000008000000 : "exend"
<6>libphy: hisi_gemac_mii_bus: probed
<4>rtl8201 init ok
<4>hi_gmac_v200 100a0000.ethernet (unnamed net_device) (uninitialized): using
random MAC address 52:ac:f3:8b:f8:66
<6>attached PHY 0 to driver Generic PHY, PHY_ID=0x1cc816
<6>Higmac dma_sg_phy: 0x85100000
<6>ETH: rmii, phy_addr=0
<6>PPP generic driver version 2.4.2
<6>PPP BSD Compression module registered
<6>PPP Deflate Compression module registered
<6>NET: Registered protocol family 24
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ehci-platform: EHCI generic platform driver
<6>ehci-platform 10040000.ehci: EHCI Host Controller
<6>ehci-platform 10040000.ehci: new USB bus registered, assigned bus number 1
<6>ehci-platform 10040000.ehci: irq 51, io mem 0x10040000
<6>ehci-platform 10040000.ehci: USB 2.0 started, EHCI 1.00
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>ohci-platform: OHCI generic platform driver
<6>ohci-platform 10030000.ohci: Generic Platform OHCI controller
<6>ohci-platform 10030000.ohci: new USB bus registered, assigned bus number 2
<6>ohci-platform 10030000.ohci: irq 50, io mem 0x10030000
<6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata1.00: ATA-8: Hitachi HUA722020ALA331, JKAOA3NH, max UDMA/133
<6>ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
<6>ata1.00: configured for UDMA/133
<5>scsi 0:0:0:0: Direct-Access ATA Hitachi HUA72202 A3NH PQ: 0 ANSI: 5
<5>sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<6> sda: unknown partition table
<5>sd 0:0:0:0: [sda] Attached SCSI disk
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>usbcore: registered new interface driver cdc_acm
<6>cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>usbcore: registered new interface driver usb-storage
<6>mousedev: PS/2 mouse device common for all mice
<6>i2c /dev entries driver
<5>hisi_i2c hisi_i2c.0: Hisilicon [i2c-0] probed!
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>TCP: cubic registered
<6>NET: Registered protocol family 10
<6>NET: Registered protocol family 17
<6>lib80211: common routines for IEEE802.11 drivers
<7>lib80211_crypt: registered algorithm 'NULL'
<7>lib80211_crypt: registered algorithm 'WEP'
<7>lib80211_crypt: registered algorithm 'CCMP'
<7>lib80211_crypt: registered algorithm 'TKIP'
<5>Registering SWP/SWPB emulation handler
<4>reliableenv_init is starting
<6>usb 1-1: new high-speed USB device number 2 using ehci-platform
<6>ata2: SATA link down (SStatus 0 SControl 300)
<6>VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
<6>devtmpfs: mounted
<6>Freeing unused kernel memory: 200K (8057c000 - 805ae000)
<5>random: init urandom read with 9 bits of entropy available
<6>usb-storage 1-1:1.0: USB Mass Storage device detected
<6>scsi host2: usb-storage 1-1:1.0
<5>UBI: attaching mtd9 to ubi0
<5>UBI: scanning is finished
<5>UBI: attached mtd9 (name "config", size 10 MiB) to ubi0
<5>UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
<5>UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
<5>UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
<5>UBI: good PEBs: 80, bad PEBs: 0, corrupted PEBs: 0
<5>UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
<5>UBI: max/mean erase counter: 467/325, WL threshold: 4096, image sequence number:
0
<5>UBI: available PEBs: 6, total reserved PEBs: 74, PEBs reserved for bad PEB
handling: 20
<5>UBI: background thread "ubi_bgt0d" started, PID 91
<3>UBI error: ubi_create_volume: volume "config" exists (ID 0)
<3>UBI error: ubi_create_volume: cannot create volume 1, error -17
<5>UBIFS: background thread "ubifs_bgt0_0" started, PID 96
<5>UBIFS: recovery needed
<6>usb 2-2: new low-speed USB device number 2 using ohci-platform
<5>UBIFS: recovery completed
<5>UBIFS: mounted UBI device 0, volume 0, name "config"
<5>UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048
bytes/2048 bytes
<5>UBIFS: FS size: 5079040 bytes (4 MiB, 40 LEBs), journal size 1015809 bytes (0
MiB, 6 LEBs)
<5>UBIFS: reserved for root: 239895 bytes (234 KiB)
<5>UBIFS: media format: w4/r0 (latest is w4/r0), UUID 0A340B7D-449D-41AF-A7C4-
D9FF61B61AF9, small LPT model
<6>input: SIGMACHIP Usb Mouse as /devices/soc/10030000.ohci/usb2/2-2/2-
2:1.0/0003:1C4F:0048.0001/input/input0
<6>hid-generic 0003:1C4F:0048.0001: input: USB HID v1.10 Mouse [SIGMACHIP Usb
Mouse] on usb-10030000.ohci-2/input0
<5>scsi 2:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
<5>sd 2:0:0:0: Attached scsi generic sg1 type 0
<5>sd 2:0:0:0: [sdb] 60604416 512-byte logical blocks: (31.0 GB/28.8 GiB)
<5>sd 2:0:0:0: [sdb] Write Protect is off
<7>sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 00
<5>sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support
DPO or FUA
<6> sdb: sdb1
<5>sd 2:0:0:0: [sdb] Attached SCSI removable disk
<4>#[m
<4>
<4>#[m#[0;32;32m[OSA-DRV] OSA Build on Nov 28 2017 at 11:12:37.
<4>#[m#[0;32;32m[OSA-DRV] SVN NUM: 12976.
<4>
<4>#[m
<4>#[0;35m[OSA-DRV] Monitor Task pid=117 tid=117
<4>#[m
<4>#[0;32;32m[OSA-DRV] Char device create OK !
<4>#[m
<4>
<4>------------------------------------------------------------
<4> driverbox.ko SVN version:32309 build date: Sat, 21 Jul 2018 03:13:19 +0800
<4>------------------------------------------------------------
<4>#[mopen hwid config file failed
<4>#[m#[mProlicyTable[0] = 0
<4> #[m#[mProlicyTable[1] = 2
<4> #[m#[mProlicyTable[2] = 1
<4> #[m#[mProlicyTable[3] = 0
<4> #[m#[mProlicyTable[4] = 0
<4> #[m#[mProlicyTable[5] = 0
<4> #[m#[mProlicyTable[6] = 0
<4> #[m#[mProlicyTable[7] = 0
<4> #[m#[mProlicyTable[8] = 0
<4> #[m#[0;32;32m[DRVBOX] Default product_pre_deal
<4>#[m#[msystem gpio infor:#[m0000100#[m
<4>#[m#[0;32;32m[DRVBOX] our product ID: 0x040005E2
<4>#[m#[0;32;32m[DRVBOX] our board ID: 0x03000040
<4>#[m#[0;32;32m[DRVBOX] our product Type: XVR1B04
<4>#[mhost_hwid_value:[0x002007e300042406][0x00040a100000028d]
<4>#[0;32;32m[DRVBOX] NICE, This System Has No I2c SwitchChips.
<4>#[m#[0;32;32m[DRVBOX] NICE, This System Has No Signal Selector.
<4>#[m#[mHisilicon Watchdog Timer: 0.01 initialized. default_margin=180 sec
(nowayout= 0, nodeamon= 1)
<4>#[m#[0;32;32m[DRVBOX] Total 0 spi bus registered
<4>#[m#[m[ExpComDriver]: NICE, This System Has No ExpandComs.
<4>#[m#[mThis Machine Has No Expand Coms.
<4>#[m#[mThis Machine Has No LCD devices.
<4>#[m#[m[INFRARED]: NICE, This Machine Doesn't Support INFRARED.
<4>#[m#[1;33m[DRVBOX] WARN (dh_misc_init_device|178): UNKONW TYPE. Using Default.
<4>#[m#[1;33m[DRVBOX] WARN (default_misc_init|66): Default default_misc_init
<4>#[m#[mNICE, The Kernel Supports BPA, But We Don't Use it.
<4>#[m#[mNICE, This System Has No EDMA FUNCTION.
<4>#[m#[1;33m[DRVBOX] WARN (plat_chip_init|68): System has no SOC CHIP module.
<4>#[m#[mNo TouchScreen
<4>#[m#[0;32;32m[DRVBOX] [MBUS]: NICE, This Machine Doesn't Support MBUS.
<4>#[m#[0;32;32m[DRVBOX] [PSTN]: NICE, This Machine Doesn't Support PSTN.
<4>#[m#[0;32;32m[DRVBOX] monitor num 0
<4>#[m#[1;33m[DRVBOX] WARN (rocker_init_dev|1401): The Rocker res type is
ROCKER_TYPE_UNKNOW!
<4>#[m#[1;33m[DRVBOX] WARN (touchkey_init_dev|509): The Touchkey res type is
TOUCHKEY_TYPE_UNKNOW!
<4>#[m
<4>#[0;32;32m[AVS]
*****************************************************************************
<4>#[m#[0;32;32m[AVS] * avs version: V00.001 svn: 32535 Compile at: Sat, 21 Jul
2018 03:28:05 +0800 *
<4>#[m#[0;32;32m[AVS]
*****************************************************************************
<4>#[m#[0;32;32m[AVS] Find product (id=0x40005e2, cpu index=0).
<4>#[m#[0;32;32m[AVS] product resource found.
<4>#[m#[0;32;32m[AVS] Begin to Alloc avs cfg mem!
<4>#[m#[0;32;32m[AVS] chip resoure found.
<4>#[m#[0;32;32m[AVS] board resoure found enChip:10 .
<4>#[m#[0;32;32m[AVS] GlobVideoChNum:4 DspNum:0 ChipIndex:0
u32GlobDigtChNum:0,i32IsSuportExtra:0 u32MaxDecChNum:5 u32IvsChnNum: 0
<4>#[m#[0;32;32m[AVS] iSupConaxiAudio:1 NorAudioChnNum:1, GlobAudioChNum:4
<4>#[m#[0;32;32m[AVS] ChipIndex:[0], LocalAudioChNum:4, AudioCvi:4, AudioNor:1
<4>#[m#[0;32;32m[AVS] GetVdecVbPicBlkCnt enChnType:1 PlayBackBlkCnt:0
PreDecBlkCnt:0, s32BlkCnt:4
<4>#[m#[0;32;32m[AVS] GetVdecVbPicBlkCnt enChnType:2 PlayBackBlkCnt:0
PreDecBlkCnt:0, s32BlkCnt:9
<4>#[m#[0;32;32m[AVS] GetVdecVbPMVBlkCnt enChnType:1 PlayBackBlkCnt:0
PreDecBlkCnt:0, s32BlkCnt:3
<4>#[m#[0;32;32m[AVS] GetVdecVbPMVBlkCnt enChnType:2 PlayBackBlkCnt:0
PreDecBlkCnt:0, s32BlkCnt:6
<4>#[m#[0;32;32m[AVS] backiva_vpss start:17
<4>#[m#[0;32;32m[AVS] vpss_vi_cnt:22 maxDec:4
<4>#[m#[0;32;32m[AVS] 3521D u32PreviewNum:2 vct[vi:4 venc:4 ai:4 aenc4] vis:4
vencs:8 vpss:28 IVA_Total:1
<4>#[m#[0;32;32m[AVS] Register_Init modnum:0
<4>#[m#[0;32;32m[AVS] Found the product, and init successfully.
<4>#[m
<4>Module himedia: init ok
<6>Hisilicon Media Memory Zone Manager
<4>hi_osal 1.0 init success!
<4>hi_base: module license 'Proprietary' taints kernel.
<4>Disabling lock debugging due to kernel taint
<4>load base.ko ... OK!
<4>load sys.ko ...OK!
<4>load vdec.ko ....OK!
<4>load vdh firmware.ko OK
<4>load jpegd.ko ....OK!
<4>load tde.ko ...OK!
<4>load region.ko ....OK!
<4>load vgs.ko ...OK!
<4>load viu.ko for ...OK!
<4>load vpss.ko ...OK!
<4>load vou.ko OK!
<4>load hifb.ko OK!
<4>load hdmi.ko OK!
<4>load rc.ko ...OK!
<4>load venc.ko ...OK!
<4>load chnl.ko ...OK!
<4>load vedu.ko ...OK!
<4>load h264e.ko ...OK!
<4>load h265e.ko ...OK!
<4>load jpege.ko ...OK!
<4>load vda.ko ....OK!
<4>load ive.ko ... OK!
<4>
<4>******************************************************************************
<4>GENERAL: I2C_GEN Version: V0.00.01 Svn: 12696+ Compile at Dec 4 2017 14:27:48
<4>******************************************************************************
<4>unlocked_ioctl:7f66f814
<4>load aio.ko OK!
<4>load ai.ko OK!
<4>load ao.ko OK!
<4>load aenc.ko OK!
<4>load adec.ko OK!
<6>usbcore: registered new interface driver usbserial
<6>usbcore: registered new interface driver option
<6>usbserial: USB Serial support registered for GSM modem (1-port)
<6>usbcore: registered new interface driver cdc_ether
<4>rtl8201 init ok
<6>IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<4>#[m
<3>ioctl DH_GET_3G_RES called
<4>#[m
<4>rtl8201 init ok
<6>IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>netinit uses obsolete (PF_INET,SOCK_PACKET)
<4>rtl8201 init ok
<6>IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<4>open /mnt/mtd/Config/error_trap_file success
<4>crypto start ....
<4>#[0;32;32m[DRVBOX] initing UART(2)
<4>#[m#[0;32;32m[DRVBOX] initing UART(1)
<4>#[m
<4>FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt.
Please run fsck.
<4>#[0;32;32m[DRVBOX] initing UART(2)
<4>#[m#[0;32;32m[DRVBOX] initing UART(1)
<4>#[m#[0;32;32m[DRVBOX] Kernel I2cDevRes Hit, i2c handle=49324300...
<4>#[m#[0;32;32m[AVS] debug GET bufInfo.
<4>#[m[MmapAVS] size:4096 offset:0x0008809a
<4>#[0;32;32m[AVS] debug GET bufInfo.
<4>#[m[MmapAVS] size:4096 offset:0x0008809b
<4>#[0;32;32m[AVS] debug GET bufInfo.
<4>#[m[MmapAVS] size:4096 offset:0x000880a5
<4>#[0;32;32m[AVS] AVS_TRANS_GET_CFG
<4>#[m#[0;32;32m[AVS] AVS_AVADDAS_GET_CFG.
<4>#[m#[0;32;32m[AVS] debug GET bufInfo.
<4>#[m[MmapAVS] size:8192 offset:0x000880b2
<4>#[0;32;32m[AVS] debug GET bufInfo.
<4>#[m[MmapAVS] size:16384 offset:0x000880bc
<4>#[0;32;32m[AVS] debug GET bufInfo.
<4>#[m[MmapAVS] size:12288 offset:0x000880c4
<4>#[0;32;32m[AVS] debug GET bufInfo.
<4>#[m[MmapAVS] size:4096 offset:0x000880b7
<4>#[0;32;32m[AVS] debug GET bufInfo.
<4>#[m[MmapAVS] size:4096 offset:0x000880cc
<4>#[0;32;32m[AVS] debug GET bufInfo.
<4>#[m[MmapAVS] size:4096 offset:0x000880ce
<4>#[0;32;32m[AVS] display GET CFGs.
<4>#[m#[0;32;32m[AVS] preview GET CFGs.
<4>#[m#[0;32;32m[AVS] playback GET CFGs.
<4>#[m#[0;32;32m[AVS] debug GET bufInfo.
<4>#[m[MmapAVS] size:4096 offset:0x000880d0
<4>#[0;32;32m[AVS] debug GET bufInfo.
<4>#[m[MmapAVS] size:8192 offset:0x000880d8
<4>#[0;32;32m[AVS] AVS_MD_GET_CFG
<4>#[m#[0;32;32m[AVS] BD_GET CFGs.
<4>#[m#[0;32;32m[AVS] debug GET bufInfo.
<4>#[m[MmapAVS] size:12288 offset:0x000880ec
<4>#[0;32;32m[AVS] debug GET bufInfo.
<4>#[m[MmapAVS] size:4096 offset:0x000880e2
<4>#[0;32;32m[AVS] debug GET bufInfo.
<4>#[m[MmapAVS] size:4096 offset:0x000880f6
<4>#[0;32;32m[AVS] debug GET bufInfo.
<4>#[m[MmapAVS] size:16384 offset:0x00088104
<4>#[0;32;32m[AVS] debug GET bufInfo.
<4>#[m[MmapAVS] size:24576 offset:0x00080a18
<4>#[0;32;32m[AVS] debug GET bufInfo.
<4>#[m[MmapAVS] size:28672 offset:0x000826b8
<4>#[0;32;32m[AVS] debug GET bufInfo.
<4>#[m[MmapAVS] size:16384 offset:0x00082918
<4>#[0;32;32m[AVS] AVS_IVA_DRAW_GET_CFG
<4>#[m
<4>crypto end ....
<4>#[m
<6>dh_watchdog_open
<4>#[m#[0;32;32m[DRVBOX] Settint DefaultTimeout:180 seconds
<4>#[m#[0;32;32m[AVS] debug GET bufInfo.
<4>#[m[MmapAVS] size:4096 offset:0x00082c32
<6>echo (727): drop_caches: 3
<6>echo (738): drop_caches: 3