Job Hazard Analysis (JHA) Worksheet: Sungchang & Al-Shaikh Contracting Co.,Ltd

Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 3
At a glance
Powered by AI
The document outlines potential hazards and control measures for sandblasting and painting work. It identifies hazards such as insufficient ventilation, damaged equipment, and slip/trip/fall hazards and lists control measures like periodic inspections and using proper PPE.

Potential hazards identified include insufficient ventilation, damaged filter or hose, failure of air supply equipment, abrasive particles, loose hoses, and paint fume inhalation.

Proactive measures to control hazards include visual inspections for ventilation, periodic inspection and replacement of filters, securing hose joints, good housekeeping, continuous cleanup of blast particles, using suitable PPE, periodic inspection of equipment, and trained personnel with first aid available.

SUNGCHANG&AL-SHAIKH

CONTRACTINGCO.,LTD.
Job Hazard Analysis (JHA) Worksheet

JERP # 3, AROMATICS UNIT

COMPANY: DATE: FEBRUARY 10, 2011 , 2011


JHA NO:
(SUB-CON’) SAACO
WORK: EQUIPMENT/ TOOLS USED: AIR COMPRESSOR, SPRAY
PUMP, AUTO BLAST MACHINE.
SANDBLASTING, PAINTING.
SANDBLASTING EQUIPMENT
NAME POSITION SIGNATURE

PREPARED BY: DEPARTMENT


Victor Baricuatro HSE MANAGER

Kwanung Kim Construction Manager


APPROVED BY

Risk
Activity Order Potential Hazards Hazard Control Proactive Measures
Rating
List the steps required to perform Against each step list the potential hazards For each hazard identified list the control measures
the task in the sequence they are that could cause injury when the task is 1 =V/LOW required to eliminate or minimise the risk of injury.
carried out. performed, name tools & equipment 5 = V/HIGH
1. Insufficient Ventilation 1 1. Visual inspection for ventilation
2. Damaged Filter 5 2. Periodic inspection and replacement of filter in presence
Abrasive Blasting 3. Damaged Hose 1 of Client HSE
& 4. Failure of air supply equipment 1 officer
Painting 3. Periodic inspection of all the equipments. Follow JERES-
H-102
4. Clean filter for the Helmet.

SECL-123.REV-0 JERP-3/SO:2279 Page 1 of 3


SUNGCHANG&AL-SHAIKH
CONTRACTINGCO.,LTD.
Job Hazard Analysis (JHA) Worksheet

1. Poor House keeping 5 1. Good House keeping


Slip, Trip & Fall 2. Abrasive particles 5 2. Continuous clean up blast particles
3. Loose hoses 5 3. secure all the hose joints
4. Poor PPE 5 4. Use suitable PPE

Risk
Activity Order Potential Hazards Hazard Control Proactive Measures
Ranking
List the steps required to perform Against each step list the potential hazards 1 =V/LOW For each hazard identified list the control measures
the task in the sequence they are that could cause injury when the task is 5 = V/HIGH required to eliminate or minimise the risk of injury.
carried out. performed, name tools & equipment

Paint fume Inhalation Breathing difficult 5 Breathing Mask must be Used.

Solvent/ Paints spill on Body/Eye 1. Defective Equipment 5 1.Periodic Inspection of all equipments
2. Poor Workmanship 1 2. Trained personal must be used and first aid must be
available at work site

1. Due to work in night 1 1.should stop the job if visibility is poor


Poor visibility 2. Light failure 1 2. Stop the Job
3. Dark safety glasses 1 3. Cleat Safety Glass to be used.

SAMSUNG DATE: APPROVED SENT FOR REVIEW

CONSTRUCTION NAME POSITION SIGNATURE


DEPARTMENT

SECL-123.REV-0 JERP-3/SO:2279 Page 2 of 3


SUNGCHANG&AL-SHAIKH
CONTRACTINGCO.,LTD.
Job Hazard Analysis (JHA) Worksheet

HSE. DEPARTMENT
COMMENTS:

SECL-123.REV-0 JERP-3/SO:2279 Page 3 of 3

You might also like