VIBRO-KING TL®

SCREEN
Incline Screen

Screen Features Deck Designs

- 1/2” (no weld) sideplates (alternate 3/8”) - Side tension deck:
- 20 degree mount angle o Designed for wire cloth (up to 1/2” dia. wire)
- Huck-bolted assembly o 5’ & 6’ wide screens utilize single crown hook up /
- Reinforcing plates at vibrator hook up design
- Bolt on AR lined feedbox, 6” AR lined discharge lips o 7’ & 8’ wide screens utilize double crown hook up /
- Backplate with rubber dust curtain hook down design
- Support pedestals and springs - Modular urethane deck:
- Lifting bars o Designed for mounting urethane panels of almost
- Steel coil springs any style.
- Urethane friction checks with replaceable wear plates o Fabricated with heavy J-Beams welded into formed
- Applications from heavy duty scalping to finish screening channel side
(wet or dry) - Heavy duty J-Beam deck:
- Standard wide series bearings deliver long service life: o Designed for mounting bolt-down punch plate or
bearing sizes: TL26 (130mm bearings), TL32 (160mm steel-backed rubber media
bearings)
- Oil lubricated TL shaft assembly (single and dual shaft Optional Equipment
models) - Spray pipe assembly including spray bars with
o Oversized shaft casing increases oil volume & nozzles, spray bar supports and side plate hole covers for
extends service intervals triple/double deck screen
- “Never-Wear” sealing system: - Bolt-in 2” rubber feedbox and discharge lip liners
o Centrifugal force casts oil away - Bolt-on side plate extensions to add 10”
o No contact seals to maintain - J-Bolt hold downs for wire cloth diameters 7/16”
- Urethane labyrinth dust seal - Top deck heavy duty grizzly bar
- Best in-class serviceability - Heavy duty flat screen support frame(s)
o Splash plate to support shaft during assembly - Modular media screen support frame(s)
o Oil level sight gauge on non-drive side - Bolt-in rubber support frame liners for screen deck cross
o Grease fittings located outside of guard beams
- External counterweights - Blank screen support frame in lieu of standard crowned
- FEA design with extensive stress analysis support frame
- Operation and maintenance manuals - Standard wire cloth
- Spring guards – rubber wrap around
- V-belt drive and guards
- Pivotal motor base
- Electric motor(s)
 Feature Specifications
Adjustable stroke length (throw)* Minimum 1/4” to 7/16”
Adjustable operating speed range 780 – 1050 RPM
Slope Range 14° - 20°
Maximum feed size** 10”-18”
Maximum top deck opening 3” (wire cloth), / 6” (punch plate)
Minimum screen cloth opening 6 mesh – 3/32”
Sideplate thickness 5’ & 6’ – 3/8” *** / 7’ & 8’ – 1/2”
Reinforcing plate thickness 3/8” (3/8” sideplate) / 1/4” (1/2” sideplate)
Feed box liner thickness (AR400 Plate) 3/8”
Discharge lip length 6”
Discharge lip liner (AR400) thickness 3/8”
* For dry 100lb per cubic foot material and shaft rotating with the flow
** Maximum feed size will vary based on deck design, media selection, and feed height
*** Plate thickness based on duty and application

Physical and Operating Characteristics

Power Required Weight* Bearing Size Per Shaft Oil Capacity Per Shaft Support
Frame**
Single Shaft Dual Shaft TL26 TL32 Dual Dual TL26 TL32 Side
(HP/kW x 2) TL26 TL32 Tension
(Wire
TL26 TL32 TL26 TL32 Cloth)
Model HP/ HP/ HP/ HP/ lb kg mm mm mm mm gal. liters gal. liters Single
kW kW kW kW Crown
5x16 DD 25/19 -/- -/- -/- 13,455 6,103 130 - - - 4.3 16.3 4.4 16.7 Single
Crown
5x16 TD 30/23 -/- -/- -/- 17,009 7,715 130 - - - 4.3 16.3 4.4 16.7 Single
Crown
6x16 DD 25/19 30/23 20/15 -/- 14,863 6,742 130 160 130 - 5.2 19.7 5.3 20.1 Single
Crown
6x16 TD 30/23 40/30 20/15 -/- 19,573 8,878 130 160 130 - 5.2 19.7 5.3 20.1 Single
Crown
6x16 QD -/- 40/30 30/40 23/30 22,848 10,364 - 160 130 160 5.2 19.7 5.3 20.1 Single
Crown
6x20 DD 30/23 40/30 20/20 15/15 17,439 7,910 130 160 130 160 5.2 19.7 5.3 20.1 Single
Crown
6x20 TD -/- 40/30 25/25 19/19 22,728 10,309 - 160 130 160 5.2 19.7 5.3 20.1 Single
Crown
6x20 QD -/- 40/30 30/23 40/30 29,220 13,254 - 160 130 160 5.2 19.7 5.3 20.1 Single
Crown
7x20 DD -/- 40/30 20/15 25/19 23,598 10,704 - 160 130 160 6 22.7 6.1 23.1 Double
Crown
7x20 TD -/- 40/30 25/19 30/23 30,574 16,868 - 160 130 160 6 22.7 6.1 23.1 Double
Crown
8x20 DD -/- 40/30 25/19 25/19 25,056 11,365 - 160 130 160 6.9 26.1 7 26.5 Double
Crown
8x20 TD -/- -/- 30/23 30/23 33,166 15,044 - - 130 160 6.9 26.1 7 26.5 Double
Crown
8x20 QD -/- -/- 30/23 40/30 38,311 17,378 - - 130 160 6.9 26.1 7 26.5 Double
Crown
8x24 DD -/- -/- 25/19 30/23 28,102 12,747 - - 130 160 6.9 26.1 7 26.5 Double
Crown
8x24 TD -/- -/- -/- 40/30 36,861 16,720 - - - 160 6.9 26.1 7 26.5 Double
Crown
8x24 QD -/- -/- -/- 40/30 49,855 24,152 - - - 160 6.9 26.1 7 26.5 Double
Crown
*Weights are approximate and include wire cloth. All weights shown are estimated and may vary due to fabrication variables, optional equipment or custom
engineering. Consult facotry for additional quad deck models. **Additional support frames available. Modular Urethane Deck & Heavy Duty J-Beam Deck.
Screen Dimensions
A
B
INSIDE FEEDBOX
MACHINE ℄

O
F

20.0°

K
M
SPRING SUPPORT
PEDDESTAL

G
J
FRICTION CHECK

I
H
C
INSIDE OF SIDEPLATES
D
OUTSIDE OF HARDWARE
E
SPRING ℄ TO ℄

Size A B C D E F G H I J K L M O
mm [in] mm [in] mm [in] mm [in] mm [in] mm [in] mm [in mm [in] mm [in] mm [in] mm [in] mm [in] mm [in] mm [in]
5x16 2338.8 1524.0 1539.9 1713.6 1876.4 6113.3 1675.6 5215.8 115.3 1155.3 - 3730.3 1251.0 144.6
DD [92.08] [60.00] [60.63] [67.46] [73.87] [240.68] [65.97] [205.35] [4.54] [45.48] [146.86] [49.25] [5.69]
5x16 2338.8 1524.0 1539.9 1713.6 1876.4 6362.9 2361.3 5215.8 115.3 1155.3 729.7 4460.0 1251.0 144.6
TD [92.08] [60.00] [60.63] [67.46] [73.87] [250.51] [92.96] [205.35] [4.54] [45.48] [26.73] [175.59] [49.25] [5.69]
6x16 2653.7 1828.8 1844.7 2018.4 2181.2 6113.3 1675.6 5215.8 115.3 1155.3 - 3730.3 1251.0 144.6
DD [104.08] [72.00] [72.63] [79.46] [85.87] [240.68] [65.97] [205.35] [4.54] [45.48] [146.86] [49.25] [5.69]
6x16 2653.7 1828.8 1844.7 2018.4 2181.2 6362.9 2361.3 5215.8 115.3 1155.3 729.7 4460.0 1251.0 144.6
TD [104.08] [72.00] [72.63] [79.46] [85.87] [250.51] [92.96] [205.35] [4.54] [45.48] [26.73] [175.59] [49.25] [5.69]
6x20 2653.7 1828.8 1844.7 2024.8 2181.2 7332.5 1677.8 6361.5 115.3 1155.3 - 4147.3 1668.0 144.6
DD [104.08] [72.00] [72.63] [79.71] [85.87] [288.68] [66.06] [250.45] [4.54] [45.48] [163.28] [65.67] [5.69]
6x20 2653.7 1828.8 1844.7 2024.8 2181.2 7582.1 2363.4 6361.5 115.3 1155.3 729.7 4877.0 1668.0 144.6
TD [104.08] [72.00] [72.63] [79.71] [85.87] [298.51] [93.05] [250.45] [4.54] [45.48] [26.73] [192.01] [65.67] [5.69]
7x20 2948.4 2133.6 2149.5 2335.9 2486.0 7332.5 1677.8 6361.5 115.3 1155.3 - 4147.3 1668.0 144.6
DD [116.08] [84.00] [84.63] [91.96] [97.87] [288.68] [66.06] [250.45] [4.54] [45.48] [163.28] [65.67] [5.69]
7x20 2948.4 2133.6 2149.5 2335.9 2486.0 7582.1 2363.4 6361.5 115.3 1155.3 729.7 4877.0 1668.0 144.6
TD [116.08] [84.00] [84.63] [91.96] [97.87] [298.51] [93.05] [250.45] [4.54] [45.48] [26.73] [192.01] [65.67] [5.69]
8x20 3253.23 2438.4 2454.3 2647.1 2790.8 7322.5 1677.8 6361.5 115.3 1155.3 - 4147.3 1668.0 144.6
DD [128.08] [96.00] [96.63] [104.21] [109.87] [288.29] [66.06] [250.45] [4.54] [45.48] [163.28] [65.67] [5.69]
8x20 3253.23 2438.4 2454.3 2647.1 2790.8 7582.1 2363.4 6361.5 115.3 1155.3 729.7 4877.0 1668.0 144.6
TD [128.08] [96.00] [96.63] [104.21] [109.87] [298.51] [93.05] [250.45] [4.54] [45.48] [26.73] [192.01] [65.67] [5.69]
8x24 3253.23 2438.4 2454.3 2653.4 2790.8 8551.7 1677.8 7507.2 115.3 1155.3 - 4564.3 2085.0 144.6
DD [128.08] [96.00] [96.63] [104.46] [109.87] [336.68] [66.06] [295.56] [4.54] [45.48] [179.70] [82.09] [5.69]
8x24 3253.23 2438.4 2454.3 2653.4 2790.8 8801.3 2363.4 7507.2 115.3 1155.3 729.7 5294.0 2085.0 144.6
TD [128.08] [96.00] [96.63] [104.46] [109.87] [346.51] [93.05] [295.56] [4.54] [45.48] [26.73] [208.43] [82.09] [5.69]

*Right hand drive shown. Speed and stroke based on media openings at time of sale, machine weight and vibrator configuration dependent on application
and media selection. **The throw, speed, slope and screening surfaces of vibrating screens are established by the factory for each application.

NOTE: CONSULT FACTORY FOR EXACT DIMENSIONS, specifications are subject to change without notice. Continuous design
progress makes it necessary that specifications be subject to change without notice. All sales of the products of Telsmith, Inc. are subject to
the provisions of their standard warranty. Telsmith, Inc do not warrant or represent that their products meet any federal, state, or local stat-
utes, codes, ordinances, rules, standards or other regulations, including OSHA and MSHA, covering safety, pollution, electrical wiring, etc.
Telsmith, Inc. Compliance with these statutes and regulations is the responsibility of the user and will be dependent upon the area and the use to which
10910 N. Industrial Dr. the product is put by the user. In some photographs, guards may have been removed for illustrative purposes only. This equipment should
Mequon, WI 53092 USA
(262) 242-6600 not be operated without all guards attached in their normal position. Placement of guards and other safety equipment is often dependent
[email protected] upon the area and how the product is used. A safety study should be made by the user of the application, and, if required additional guards,
www.telsmith.com warning signs and other safety devices should be installed by the user, wherever appropriate before operating the products. 12/20