Document 8-Annex - C - BOQ-003-Dhanusha and Mahottari

Annex-C: Bill of Quantities (To be submitted with Financial Proposal Only)
SUMMARY OF COST
UNOPS - Modernisation & Improvement of Policing Project (MIPP) in Nepal: Construction of 4 Number of Police Buildings in Dhanusha
Project
and Mahottari Districts
Location District Dhanusha and Mahottari Nepal
Units P S-Traditional Bhittamode, APO-A Gaushala, APO-A Yadhukuwa and APO-B Bharatpur.
Bid Amount in Figures
S. No. Description of Works Bid Amount in Words (NRs.)
(NRs.)
1 Civil Works (Mahottari and Dhanusha)
Sanitary Works (Mahottari and

2
Dhanusha)
Electrical Works (Mahottari and
3
Dhanusha)
4 Sub Total (1+2+3)
Equipment for Field Laboratory

5 (Provisional Sum). Please refer to 600,000.00 Six hundred thousands NRs.
Technical Specifications
6 Insurance (Provisional Sum) 1,000,000.00 One million NRs.
7 Sub - Total (4+5+6)
8 VAT (13% of 7)
Grand Total (7+8)
Company Stamp:
Submitted by:
Name:
Title:
Date:
Signature:
Bill of Quantities
Project : UNOPS - Modernisation & Improvement of Policing project (MIPP) in Nepal: Construction of Nepal Police Buildings in Dhanusha District
Location District Dhanusha, Nepal
Units APO-A Yadhukuwa and APO-B Bharatpur, Dhanusha, Nepal
Sub Item : Civil works
Item Rate In
Description of Works Unit Quantity Figures Rate in Words (NRs.) Amount (NRs.)
No.
(NRs.)
DM Dismantling works
Dismantling of existing building, properly stacking bricks, rubble,
DM1 etc. at required location, all complete as per specifications and Job 1.00
instructions. (APO-Bharatpur)
Sub -total: Dismantling Works
G General
Clearing and grubbing of site for construction including uprooting
of vegetation, grass, brush wood, trees and sapplings of girth
G1 Sq.M 815.10
upto 300 mm & removal upto a distance of 50 m as per
drawings, specifications and instructions
Sub - total: General
E Earthwork
Earthwork in excavation in trenches, pits and foundations in soft
soil including existing debris and brick bats of old structure, if
any, upto specified depth including shoring, dressing of sides,
mechanical ramming of bottom, dewatering in foundation pits
E1 and trenches, if required, lifting of soil for minimum 2.0 m and Cu.M. 788.20
stacking soil to minimum height of 1m and lead upto 30m, all
complete as per drawings, specifications and instructions
750mm dia boring work for gravel column upto required depth
with drilling equipments and accessories in soft soil, all complete
E1a as per drawings, specifications and instructions R.M. 970.50
Providing and placing of random filling of excavated earth

stacked at site or brought from burrow pit in 150mm thick layer in
trenches, plinth or under floor, sides of foundation and below
E6 beam at footing covered area etc. including watering, Cu.M. 623.00
mechanical ramming and compaction of each layer,
consolidation and dressing, all complete as per drawings,
specifications and instructions.
BOQ Dhanusha Page 1 of 24

Item Rate In
No.
(NRs.)
Sand filling in plinth under floors, including watering, ramming,
E7 consolidating and dressing, all complete as per drawings, Cu.M. 34.80
Gravel filling in foundation below PCC, including watering,
E12 ramming, consolidating and dressing, all complete as per Cu.M. 27.30
drawings, specifications and instructions.
Providing & placing well graded gravel and sand (2mm to 75mm)
filling in 750mm dia bored hole for gravel column, including
E13 Cu.M 466.60
watering, mechanical compaction, etc. all complete as per
Sub - total: Earthworks
BW Brick work
Flat brick soling of local chimney bricks laid in line and level,
B1 including packing joints with sand, complete as per drawings, Sq.M. 331.20
specifications and instructions
First class brick work in cement and sand mortar of mix 1:4 with
chimney-made bricks, in any size and shape of wall, made to
required line, level, shape and plumb including setting out,
B4 soaking of bricks, curing of the works and scaffolding, etc. Cu.M. 390.20
complete as per drawings, specifications and instructions.
First class half brick masonry works made with chimney made
bricks in cement mortar 1:4 (1 cement: 4 coarse sand) with
reinforcement (2 nos 8mm dia) as per detail in every fifth course,
embedded in cement mortar in wall of any size and shape, made
B5 to required line, level, shape and plumb including setting out, Sq.M. 1,010.30
soaking of bricks, curing of the works and scaffolding, etc.
Sub - total: Brick Works

Item Rate In
No.
(NRs.)
CW Concrete Work
Plain cement concrete (PCC) of grade M10 (1:3:6 with 1 cement,
3 coarse sand and 6 aggregate of 19 mm and down grade) in
foundation base including mixing, laying, compacting, finishing,
CW1 curing, laid to exact line, level and dimensions, inclusive ofside Cu.M. 50.60
shuttering, complete as per drawings, specifications and
instructions
Structural concrete (PCC for RCC) of Grade M20 works with
approved quality of cement, sand and well graded aggregate in
any form, size, shape and level including batching and mixing
CW3 with machine, laying including compaction with vibrating Cu.M. 469.80
machine, curing, testing and finishing, all complete as per
Placing plyboard form work with steel props, shuttering,

centering in horizontal/Vertical surfaces like slab, beams,
CW5 Sq.M. 3,561.80
column, wall, stair etc. for all RCC works of any shape, size and
at any level and removal after completion
Providing & placing steel reinforcement bar tested grade Fe-500
equivalent NS, for RCC work including bending, binding with
CW6 MT 67.50
anneal wire and placing in position, all complete as per
drawings, specifications and instruction
Sub - total Concrete Works
FW Finishing works
12.5 mm thick cement plastering with 1cement : 4 sand mortar
on any level size & shape of wall, column, ceiling, band, blocks,
etc inclusive of dusting, throating, etc as required including
PL1 racking, watering, cleaning of base, plastering to plumb, line, Sq. M. 6,065.40
level, smooth etc. and curing, all complete as per drawings,
specifications & instructions.
Two coat of plastic emulsion paint over two coat of primer,
P3 finished including surface preparation all complete as per Sq. M. 3,550.20
Providing and laying glazed ceramic tile (A-grade Kajaria, Orient
or equivalent) in required pattern and colour on walls with
P4 cement mortar of mix 1:4 backing and filling joints (epoxy grout), Sq. M. 340.40
including border tile, all complete as per drawings, specifications
and instructions.

Item Rate In
No.
(NRs.)
Providing & laying stone finish ceramic tile in required pattern
and colour on exterior walls with cement mortar of mix 1:4
P4a Sq.M. 265.00
backing and filling joints (epoxy grout), all complete as per
drawings, specifications & instructions.
Two coat of enamel paint in mat finishing over two coat of
P6 primer, finished including surface preparation all complete as per Sq. M. 190.00
Two coat of weather coat (Apex or equivalent) over required coat
P7 of primer, finished including surface preparation all complete as Sq. M. 1,981.20
per drawings, specifications & instruction
Three coats of chopra polish, finished including surface
P8 preparation all complete as per drawings, specifications and Sq.M. 79.00
instruction
Providing and fixing 12 mm thick water proof ply board panelling
on wall including wooden beading of approved quality all
P14 complete as per drawings, specifications and instruction. Sq.M. 79.00
WF1 Applying 2 mm thick white putty punning (Birla or equivalent) to Sq.m 5,211.40
walls & ceilings in smooth & even finish, all complete as per
Sub - total: Finishing Works

Item Rate In
No.
(NRs.)
F Flooring
Providing and placing 50 mm thick Plain cement concrete of
grade M15 (1:2:4 with 1 cement, 2 coarse sand and 4 aggregate
of 19 mm and down grade) in the floor base including water
proofing compound, mixing, laying, compacting, finishing, curing,
F1 laid to exact line level and dimensions (floor concrete is laid in Sq.M. 525.80
alternate panels of 1 m x 1 m) inclusive of shuttering complete
as per drawings, specifications and instructions
Providing and placing 38 mm thick Plain cement concrete of

grade M15 (1:2:4 with 1 cement, 2 coarse sand and 4 aggregate
of 19 mm and down grade) in the floor base including water
proofing compound, mixing, laying, compacting, finishing, curing,
F2 laid to exact line level and dimensions (floor concrete is laid in Sq.M. 1,077.40
alternate panels of 1 m x 1 m) inclusive of shuttering complete
as per drawings, specifications and instructions
Providing and laying vitrified, monolithic straight edge tile

(600mm X 600 mm) for floor over 30 to 40 mm thick cement
F3 sand mortar of mix 1:6 backing and filling joints with epoxy grout Sq.M. 572.70
and pigment, all complete as per drawings, specifications and
instructions.
Providing and laying 3 mm cement punning in floor of 1:1
(cement : screened sand) over 12.5 mm thick cement screeding
F5 of 1:3 ( cement : sand) laying in required pattern, line and level Sq.M. 296.40
including curing all complete as per drawings, specifications and
instruction.
Providing and placing 75 mm high, 3 mm cement punning
skirting of 1:1 (cement : screened sand) over 12.5 mm thick
F8 cement plaster of 1:2 ( cement : sand) laying in required pattern, R.M. 158.90
line and level including curing all complete as per drawings,
specifications and instruction
Providing & placing 75 mm high, vitrified, monolithic tile skirting
over 12.5 mm thick cement plaster of 1:2 ( cement : sand) laying
F8a in required pattern, line & level including curing all complete as R.M. 596.70

Item Rate In
No.
(NRs.)
Providing and laying approved brand quality, pattern and colour
glazed ceramic tile (A-grade Kajaria, Orient or equivalent) on
F9 floor over cement mortar of mix 1:4 backing and filling joints Sq. M. 104.80
(epoxy grout) complete as per drawings, specifications and
instructions.
Providing and laying 16 mm thick Rajnagar white or equivalent
marble in staircase steps of approved colour and quality
including 20 mm thick screeding with cement mortar of 1:2
F11a (cement: sand), laying in required pattern, line and level all Sq. M. 26.20
complete as per drawings, specifications and instruction.
Providing & laying 75 mm high, 16 mm thick Rajnagar white or

F12 equivalent skirting of approved colour and quality all complete as R.M. 15.40
Providing & fixing solid seasoned sisum wood parquet
F33 (150x30x8mm) of approved quality all complete as per drawings, Sq.M. 62.60
specifications & instruction.
Providing & fixing Window fins of 9 mm thk cement boards on
F35 both sides of medium weight MS square pipe of 32 mm as per Sq.M. 53.20
specification, drawings & instructions all complete
Sub - total: Flooring
DW Doors, Windows and Ventilators

Providing & fixing standard anodized aluminium casement
windows, partly openable & partly fixed , using sections(88mm x
38mm x 1.2 mm), complete with 5 mm float glass, hinges, bolts,
AL1 locks, weather strips, handles, chemicals & necessary fittings Sq.M. 254.00
including fly mesh shutter, all complete as per drawings,
Providing and fixing standard anodized aluminium casement
doors using sections (101mm x 45mm x 1.5mm), complete with
5 mm float glass and/ or 9 mm thick laminated boards in
AL3 approved colour, approved bolts, locks, weather strips, door Sq.M. 227.50
closer, handles, chemicals and necessary fittings all complete
as per drawings, specifications and instruction.
Sub - Total: Doors, Windows and Ventilators

Item Rate In
No.
(NRs.)
WP Water proofing
Providing water proofing treatment to roofs or floors by using
flexible waterproof coating followed by brushed of minimum 1
mm thickness, including surface preparation, curing, etc.
WP8 complete in accordance with manufacturer's directions, Sq.M. 509.30
drawings, specifications and instructions (Make: ACME-
Tapelastic/Waterguard A/Polyalk WP/Polyflex WP or superior)
Sub - total: Water Proofing
RF Roofing
Tubular roof trusses with rafter, purlins, wind ties, brackets, etc.
made with medium grade mild steel tubes & mild steel sections
of required sizes, including hoisting, fixing in position with MS
bed plates, shoe angles, anchor bolts and cement grouting as
RF1 per drawings, specifications and instruction, complete with all Kg 900.00
material and labour for providing, fabrication and fixing, with two
coats of anticorrosive paint and base concrete, all complete
Providing & fixing in position 3 mm thick clear compact Lexan

polycarbonate sheet over roof truss, inclusive of nuts and bolts,
RF2 Sq.M. 10.40
8 mm 'J' hooks, washers, GI cup washers, all complete as per
drawings, specifications & instruction
Providing and placing 75 mm thick foam concrete block (Size
300mmx300mm and Density-900 kg/Cu.M.) on roof floor over 1
RF3 cement : 6 sand mortar and pointing with 1 cement : 2 sand Sq.M. 241.40
mortar all complete as per drawings, specifications and
instruction
Providing and placing 25 mm thick clay (Telia) tile flooring over 1
lime : 2 surkhi mortar and pointing with 1 cement : 1 sand mortar
RF4 all complete as per drawings, specifications and instruction Sq.M. 266.60

Item Rate In
No.
(NRs.)
Providing and fixing jhinguti clay tile on the sloping roof concrete
surface with polymer modified, rigid, high quality cementitious
RF5 tile adhesive (Sika Tilofix or equivalent) including surface Sq.M. 156.60
preparation, tile grout etc., all complete as per drawings,
specifications and instruction.
Providing and fixing in position 24 gauge (0 .5 mm thick) CGI
sheet over roof truss with minimum 80 mm side laps and 200
RF7 mm end laps, inclusive of nuts and bolts, 8 mm 'J' hooks, Sq.m 119.00
washers, GI cup washers, all complete as per drawings,
Sub - total: Roofing
LD Land Development
Landscaping of grounds including turfing, civil work ( brick work,
plaster, punning, stone works etc.), plantation, ground levelling
LD1 Sq.M. 36.40
by cutting or raising, etc. as per plan, all complete as per
Sub - total: Land Development
ELD Exterior Land Development

Preparation of subgrade for interlocking paving blocks laying by
cutting and filling with compaction work up to 20cm high in
ELD1 general soil in driveways areas, complete as per specifications Sq.M. 734.00
and drawings.
Supplying & laying of 60 mm thick heavy duty interlocking paving
blocks of approved colour and quality on the 50 mm thick stone
ELD2 Sq.M. 734.00
dust base in driveways and parking areas, complete as per
specifications and drawings.
ELD5 Sq.M. 76.40
Sub -total: Exterior Land Development

Item Rate In
No.
(NRs.)
MS Mild Steel Works
Providing & fixing MS work over roof truss at sloping roof base
with sheet and frame etc. complete with all material & labour for
MS5 providing fabrication and fixing, with two coats of anticorrosive Kg 574.80
paint and two coat of final painting etc, all complete as per
drawings, specifications and instruction.
Providing and fixing of grill window with two coats of anti-
corrosive base coat and two coats of enamel paint (4.5x20 mm
MS7 Sq.M 63.40
MS plate and 12 mm square bar) in position, all complete as per
Providing and fixing of lock-up grill of 20 mm dia MS bar and
50x50x4 ISA framing including grill gate for entrance with locking
MS8 arrangement with two coats of anti-corrosive base coat and two Sq.M. 36.60
coats of enamel paint, all complete as per drawings,
Providing and fixing of MS member (pipe,angle, plate, etc) for
ladder, staircase step nosing, openable hatch and support to
brickwall at beam slab soffit etc. with two coats of anti-corrosive
MS10 base coat and two coats of enamel paint (if required) in position, Kg 3,470.40
all complete as per drawings, specifications and instruction.
Sub - total: Mild Steel Works

Item Rate In
No.
(NRs.)
M Miscellaneous
Staircase and verandah railing with one 50 mm dia and two 25
mm dia medium MS pipe horizontal rails and 32 mm dia, 900
mm high medium MS pipe balusters spaced at 600 mm c/c in
the verandah and one on alternate tread of the staircase,
M8 including 10X10mm MS Solid bar combination and painting with R.M. 213.80
two coats of anti corrosive metal primer and two coats of enamel
paint, all complete as per drawings, specifications and
instruction
Staircase railing on the wall for interior staircase area with MS
M8b-1 member framing and 50mm dia MS pipe hand rail, all complete R.M. 10.60
as per drawings, specifications and instruction
Front, side step and ramp railing with one 50 mm dia MS pipe
(wall thk=3.65mm) hand rail and two 25 mm dia MS pipe (wall
thk=3.25) horizontal rails and 38 mm dia MS pipe (wall
thk=3.25), 900 mm high medium MS pipe balusters spaced at
M8c 900mm c/c (on avg) on the ramp and one on altenate tread of R.M. 121.20
the staircase, including painting with two coats of anti corrosive
metal primer and two coats of enamel paint, all complete as per
Railing with three 32 mm dia stainless steel pipe horizontal rails

and 50 mm dia, 900 mm high mediam stainless steel pipe
M8d balusters spaced at 300 mm c/c including one flap entrance , all R.M. 9.80
Terrace railing with one 35 mm dia MS pipe (wall thk=3.25mm)

horizontal rail on 300mm high 35 mm dia MS Pipe (wall thk
M10 =3.25 mm) balusters spaced at 520 mm c/c, finished with R.M. 91.00
enamel paint of approved colour, all complete as per drawings,
Providing and fixing in position 4 mm float glass mirror fixed on 9
mm marine ply, all complete with wooden framing in seasoned
M41 Shesham wood with SS studs screw as per drawings, Sq.M. 12.60
Proving & fixing in place 1.5 mm thick slip membrane in sliding
joints, including smoothening of receiving surface through steel
M46 trowelling, all complete as per drawings, specifications and Sq.M. 3.20
instruction.

Item Rate In
No.
(NRs.)
Proving & fixing in place chicken wire mesh at column - brick
M47 wall junction, all complete as per drawings, specifications and Sq.M. 112.20
instruction.
Providing and fixing GI sheet (24 gauge) chimney with exhaust
M51 fan above the kitchen counter as per drawings and specifications Set 2.00
Supply and placing of 25 mm thick polystyrene strip in between

M52 masonary wall and column joint gap, all complete as per drawing R.M. 560.80
instruction and specification.
Supply and mixing water proofing compound (Dr. Fixit Pidiproof
LW+ or equivalent) 200 ml in one bag of cement in plinth beam
M53 Lt 66.00
and DPC concrete mix during casting, all complete as per
specification and instruction.
Sub - total: Miscellaneous
Total: Civil Works

Item Rate In
No.
(NRs.)
Bill of Quantities
Units APO-A Yadhukuwa and APO-B Bharatpur, Dhanusha,
Supplying and Installation of Sanitary & Plumbing Work: Sub Item : Sanitary Works
Item Rate In
No. (NRs.)
A. Fixtures:
1 Water Closet Set:
a. Water Closet Set - Type: 'WC-1' consisting of White Ceramic
Floor Mounted Closed Coupled Water Closet Basin (WC) 'S'
Trap along with Duel Mode Flushing Cistern, Seat & Cover, set 4
Regulating (Angle) Valve, Toilet Paper Holder, Bib Cock, Robe
Hook, etc. as per Schedule - I
b. Water Closet Set - Type: 'WC-2' (for Persons with Physical
Limitations) consisting of Wall Mounted Water Closet Basin
(WC) 'P' Trap along with Duel Mode Concrealed Flushing
Cistern, Seat & Cover, Toilet Paper Holder, Health Faucet, a pair set 2
of Hinged Drop Down Support Arms, a pair of Grab Bar, Robe
Hook, etc., as per Schedule - I
2 Squatting (Asian) Pan Set:
a. Squatting Pan Set - Type: 'SP-1' consisting of White Ceramic
Floor Mounted Squating (Asian) Pan with PVC 'P' Trap, Duel
Mode Plasting Flushing Cistern, Flushing Long Bend , set 22
Regulating (Angle) Valve, Bib Cock, etc. as per Schedule - I

Item Rate In
No.
(NRs.)
3 Wash Basin Set:
a. Wash Basin Set - Type: 'WB-1' consisting of White Glazed
Vitreous China Porcelain Corner Basin, CP Pillar Cock, Bottle
Trap, Regulating (Angular) Valve for water feeder pipe line, set 4
Connecter Tube, Soap Dish, Towel Hook, etc as per Schedule-I
b. Wash Basin Set - Type: 'WB-2' consisting of White Glazed

Vitreous China Porcelain Wall Hung Rectangular Lavatory
Basin, CP Pillar Cock, Bottle Trap, Regulating (Angular) Valve set 13
for water feeder pipe line, Connecter Tube, Soap Dish, Towel
Hook, etc as per Schedule-I
c. Wash Basin Set - Type: 'WB-3' (for Persons with Physical
Limitations) consisting of White Glazed Vitreous China
Porcelain Wall Hung Rectangular Lavatory Basin, Pillar Cock,
set 2
Bottle Trap, Regulating (Angular) Valve for water feeder pipe
line, Towel Rail, Soap Dish, a pair of Hinged Drop Down Support
Arms, etc as per Schedule-I
4 Hand Wash Trough Set:
a. Hand Wash Trough Set - Type: 'HWT-1' consisting of Masonary
Hand Wash Trough (Local & Civil Work), CP Bib Cock (2 sets),
set 4
Bottle Trap, Waste, Towel Hook x 2, Soap Dish, etc as per
Schedule-I
5 Urinal Set:
a. Urinal Set - Type: 'UR-1' consisting of White Glazed Vitreous
China Porcelain Flat Back, Wall Hung Urinal Basin, Trap, CP
set 4
Push Valve for Urinal, Connecter Tube, etc as per Schedule-I
6 Shower Unit Set:

a. Shower Unit set - Type: 'SH-1' consisting of Concealed Valve,
Head Shower, Arm, Bib Cock, Soap Dish, Towel Hook, etc. as set 8
per Schedule - I
7 Stainless Steel Kitchen Sink Set:
a. Kitchen Sink Set - Type: 'KS-1' consisting of Pressed Stainless
Steel (as per AISI: 304) Kitchen Sink having Single Bowel,
set 3
Waste and Bottle Trap, Sink Cock with Swivel Spout, Towel
Hook, Soap Dish, etc. as per Schedule - I

Item Rate In
No.
(NRs.)
8 Floor Drain Set:
a. Floor Drain Set - Type: 'FD-1' consisting of uPVC Nahani Trap
of Ø 110 mm x Ø 75 mm size and Stainless Steel (SS) Insect set 42
Proof Grating, etc. as per Schedule - I
9 Water Transfer Pumping Set:
a. Electrical Water Transfer Pumping Set - 'Type -WP-2' consisting
of Electrical Multi Stage Centrifugal Pump of 0.75 kW (1.0 HP)
having capacity to discharge 35 Ipm of clear water at 15 metre
head (including Suction + Delivery + Friction Loss of the Pipe) set 2
with NB 25 mm (1") suction & delivery pipe sizes including Water
Level Control Switch for Over Head & Ground Water Tanks, etc
as per Schedule - 1
10 Over Head Water Storage Tank Set:

a. Over Head Water Storage Tank Set - 'Type-WT-1' consisting of
500 litres capacity Moulded High Density Polyethylene Water
Storage Tank having Lockable Cover and necessary connection set 8
for Inlets, Out lets, Over Flow & Drain Pipe line, etc as per
Schedule - I
11 Waste storage bins Set:
a. Supply of 300 liter capacity 3 Nos. Color coded waste storage
bins for waste storage and disposal purpose as per Schedule-I. set 4
Sub - total of 'A':

Item Rate In
No.
(NRs.)
B. Pipe Line (Inside Building and Duct):
1 Water Supply Pipe Line (Hot and Cold from Over Head Tanks / Hot Water Storage Tank to the Toilets & Kitchens Fixtures):
= Pipe Line Inside the Toilet Block up to Ducts:
a. Cold Water Supply Pipe Line from Duct to the Toilets and
Kitchens of the following sizes in Chlorinated Poly Vinyl Chloride
(C-PVC) Pipes of SDR-11 in Copper Tube Size (CTS) as per
ASTM - D 2846 of 'MARVEL' of Nepal with necessary C-PVC
Pipe Fittings (in Socket joints) of SDR-11 in CTS as per ASTM -
D 2846 of 'MARVEL', Nepal in C-PVC Solvent Cement (as per
ASTM: 493) joints including necessary Pipe Sleeves in the walls,
Brackets, Clamps, Hangers etc. of approved type also making
holes, pockets, etc. in walls or floors and making good the same
to the original condition, testing the pipe line with hydraulic
pressure of 10 kg/sq cm, rectifying the leakage, if any, all
complete as per specification and instruction.
- C-PVC Pipe of CTS ½" size (SDR-11) rm 120.00
- C-PVC Pipe of CTS ¾" size (SDR-11) rm 60.00
- C-PVC Pipe of CTS 1" Size (SDR-11) rm 190.00
- C-PVC Pipe of CTS 1¼" size (SDR-11) rm 30.00
- C-PVC Pipe of CTS 1½" size (SDR-11) rm 10.00

Item Rate In
No.
(NRs.)
b. Valves:
C-PVC or uPVC Ball Valve of 'ASTRAL', India of the following pipe size:
-
for CTS ½" Pipe Line size no 6
-
for CTS ¾" Pipe Line size no 2
-
for CTS 1" Pipe Line size no 12
-
for CTS 1¼" Pipe Line size no 4
-
for CTS 1½" Pipe Line size no 4
c. Foot Valve:
GM Foot Valve of "LEADER / ZOLOTO" as pe India Standared (ISI) of the following pipe size:
-
for CTS 1" Pipe Line size for Water Pumping Set no 2

Item Rate In
No.
(NRs.)
2 Soil, Waste and Rain Water Drainage Pipe Line (from Toilets to the ducts):
Soil & Waste Water Pipe Line (from toilets to the ducts only)
having Lead Free Unplastisied Poly Vinyl Chloride (uPVC-
EcoDrain) Pipes conforming to Indian Standard (IS:4985 &
IS:7834) of "MARVEL" of Nepal and all necessary Lead Free
Poly Vinyl Chloride (uPVC-Ecodrain) Pipe Fittings conforming to
Indian Standard (IS:14735) of 'MARVEL' of Nepal of the
following sizes in uPVC Adhesive Cement Solvent and / or 'O'
Ring Socket Joints with necessary uPVC Pipe Fittings including
Commode Sockets with or without Clean Outs as per the
condition, cutting the Pipes to the required lengths and fixing
pipe sleeves in the wall, clamps, hangers, brackets, etc. of
approved type including making holes/pockets in walls or floor
and making good the same to the original condition, testing the
pipe line by Smoke Test, rectifying the leakage, if any, all
complete as per the specification and instruction
- OD 50 mm (4.0 kgf/sq cm) rm 36.00
- OD 75 mm (4..0 kgf/sq cm) rm 140.00
- OD 110 mm (4.0 kgf/sq cm) rm 250.00
- OD 160 mm (4.0 kgf/sq cm) rm 50.00

Item Rate In
No.
(NRs.)
3 Sewer Pipe Line (Out side the Building including Rain Water):
a. Sewer Pipe Line having High Density Poly Ethylene (HDPE)
Pipes of "PANCHKANYA or Nepatop" conforming to Nepal
Standard (NS:40) - Working Pressure: 4 kgf per cm² of the
following sizes in Butt Welded Joints, cutting the Pipes to the
required lengths, testing the pipe line by Smoke Test, rectifying
the leakage, if any, all complete as per the specification and
instruction
- OD 110 mm (6.0 kgf/sq cm) rm 380.00
- OD 160 mm (6.0 kgf/sq cm) rm 100.00
Sub - total of 'B':
C. Civil Work (as per the Design, Drawing & Specification):
- Septic Tank (for 50 users) for Bharatpur no 1
- Septic Tank (for 50 users) for Ydhukuwa no 1
- Soak Pit (for 50 users) no 2
Manholes (600 mm x 600 mm) with CI Cover (24" X 24" size)

- no 52
and CI Frame
- Grease Trap no 4
- Grease Interceptor no 2
- Recharge Well for Rain Water no 2
Sub - total of 'C':
Total (A + B + C):

Item Rate In
No.
(NRs.)
Bill of Quantities
Units APO-A Yadhukuwa and APO-B Bharatpur, Dhanusha, Nepal
Supplying and Installation of Electrical Works: Sub Item : Electrical Works
Item Rate In
No.
(NRs.)
1. Main Distribution Boards/Final DB'S make: SIEMENS /L&T
/LEGRAND)
Supply of following SMDB fabricated out of 2 mm thick CRCA
sheet wall mounted, dust and vermin proof 16/14 gauge CRCA
sheet steel shall be used for panels. Cable gland plates shall be
provided on top of the panels. Panels shall be treated with all
anticorrosive process before painting as per specifications with 2
coats of zinc chromate primer and final approved shade of
enamelled paint.1 No. earthing terminals shall be provided for all
distribution panels. Panels shall be suitable for 415V, 3-phase, 4-
wire, 50Hz supply system .
Approval shall be taken for each panel before fabrication.
Galvanized hardwares with zinc passivation shall be used in
fabrication of panels.
MAIN PANEL
Incoming :
i) 32A 3 pole MCCB of 15 KA-3 Nos.
1a-APO. ii) 32A 4 pole Changeover Nos. 2
Outgoings :
i) 4 Nos.20A, TP MCB (10KA)
ii) 10Nos.6A, SP MCB (10KA)
6 WAYS TPN DB( Ground+first floor)
Incoming :
i) 20 A 3 pole MCB of 10 KA-1 No.
1b-APO. Nos. 4
ii) 20 A 2 pole RCBO of 10 KA-3No.
Outgoings :
i) 18 Nos.6/16 A, SP MCB (10KA)

Item Rate In
No.
(NRs.)
4 WAYS TPN DB( Second floor)
Incoming :
1c-APO. Nos. 4
Outgoings :
i) 12 Nos.6/16 A, SP MCB (10KA)
2 Supply , laying , testing and commissioning of the following
types of cables pulled in HDP Conduit and end termination on
both side of cable with necessary gland and lugs
Brand: Mahalaxmi /Prakash/pioneer Cable or equivalent
a 4 Core10 mm2 cu. armoured XLPE CABLE for DB main supply
m 190
b. 4 Core 6 mm2 cu. unrmoured XLPE CABLE for DB main supply

m 120
c 1 Core 6 mm2 cu. unrmoured XLPE CABLE for DB main supply

m 120
Supply and making of earth pits to construct a LORESS Nos. 4

Maintenance free Earth with following specification complete
with excavation, back filling, effecting connections testing and
commissiong including providing and fixing masoanry chamber
and hinged cover.The material used for this are
i) Copper Bonded Electrodes of required length to achieve

3 required level.
ii) LORESS Earth enhancing compound
iii) Rod to Cable Clamp
iv) Copper Bus Bar(300 x 25 x3 ) mm
v) Insulator
vi) 16 Sq mm copper cable to connect the earthpit to earth
busbar in equipment room of approx. length-10 m.

Item Rate In
No.
(NRs.)
4 Wiring for Light points/ exhaust fan points/ ceiling fan points,
ceiling fan regulators with 2x2.5 +1x1.5 sq copper conductor
wires in suitable size PVC conduit including , circuit wiring
from DB to switch via electric points , wall chasing and making
good with cement etc as per site requirement, the rate should Points. 328
include switch also.The cost should include testing of complete
wiring system. wire make: prakash, mahalaxmi, pioneer
4.1 Wiring for ceiling fan points, ceiling fan regulators with 2x2.5
+1x1.5 sq copper conductor wires in suitable size MS conduit
including , circuit wiring from DB to switch via electric points ,
wall chasing and making good with cement etc as per site Points. 2
requirement, the rate should include switch also.The cost should
include testing of complete wiring system. wire make: prakash,
mahalaxmi, pioneer
5 Wiring for 6/16 amp sockets with 2x4 + 1 x 2.5sq copper
conductor wires running to 20 mm conduit.The cost is including
socket .The cost should include testing of complete wiring Points. 96
system. wire make: prakash, mahalaxmi, pioneer
6 Conduiting for external light provision with suitable size PVC

conduit from DB to electric points with nylon rope pulled inside
from DB to points for future provision of wire pulling. Points. 38
7.0. FANS & LIGHTING FIXTURES ( Philips or equivalent), The

rate should include bulb cost and fixing accessories.
a Supply, Installation, Testing & Commissioning of 15 watt (
36x36x16) led panel with controller and necessary material.of
philips make SM518C-6500k, 900 Lumen,1600 lux white/grey Set 84
colour or equivalent in fiam
b Supply, Installation, Testing & Commissioning of 24 watt (
c Supply, Installation, Testing & Commissioning of 6 watt led panel Set 66
with controller and necessary material.of philips make SM518C-
6500k, 900 Lumen,1600 lux white/grey colour or equivalent in
fiam

Item Rate In
No.
(NRs.)
d Supply, Installation, Testing & Commissioning of 8 watt led
internal bulkhead light with controller and necessary material.of Set 36
philips or equivalent in fiam
e Supply, Installation, Testing & Commissioning of 8 watt led
external bulkhead light with controller and necessary material.of Set 64
f Supply, Installation, Testing & Commissioning of flood light with
IP 65 grade and necessary material.of philips or equivalent in Set 10
wipro
g Supply, Installation, Testing & Commissioning of 42" ceiling fan
of usha or almonard make Set 38
h Supply, Installation, Testing & Commissioning of 12" metal

exhaust fan of usha or almonard make Set 12
i Supply, Installation, Testing & Commissioning of exit light of

samcon make Set 6
8 Telephone/TV system(Honeywell/siemens OR EQUIVALENT
a Supply and installation of 10 pair telephone tag blocks including

box all complete Nos. 6
b Supply and laying of folloiwing telephone cables with .51 mm

dia copper conductor, twisted pair, vapour barrier ,color coded
unarmoured cables in trunking including effecting terminations RM 70
on both sides
10 Pair cable
c Point wiring for Telephone point with 4 pair 0.51dia cable(Cat-6)
running in 20 mm conduit including effecting terminations on
Nos. 36
both sides,chasing walls as required.The rate should include
telephone socket..
d Point wiring for TV point with RG-6 cable running in 20 mm
conduit including effecting terminations on both sides,chasing
Nos. 12
walls as required..the rate should include TV socket.
e Supply and installation of 4 ways TV Splitter including box all

complete Nos. 4

Item Rate In
No.
(NRs.)
9 CCTV System, Brand: Sony/Bosch
a wiring for cctv points with cat-6 cu. Cable of digicom or D-link Nos. 10
make in 20 mm conduit from respective Hub for networking.
10 COMPUTER POINT WIRING

a Wiring for computer points with cat-6 cu. Cable of digicom or D-
link make in 20 mm conduit from respective Hub for networking. Nos. 20
b Supply , installation, testing of computer Network socket with

single module face plate and modular jack Nos. 20
c Supply, Installtion, testing, commissioning of following Network

switch with 13 Patch Panel and patch cord
i 8 port Network Switch - Cisco small business series
Nos. 4
ii Patch cord
Nos. 40
11.0 Lightening protection system with Lightening strike and 25 m

long horizontal run 25 x 3 mm copper strip installed in roof with Nos. 2
all necessary equipment complete as package.
12.0 145 watt PV Module Solar panel with Charge controller,
mounting frame suitable for charging 200 AH Battery as of item Nos. 4
no. 11.
13.0 Supply, installation , testing and commissioning of 800 VA Nos. 2
Invertor with 200 AH Tubular battery sinewave of EXIDE make
with all necessary material required for operation.

Item Rate In
No.
(NRs.)
14 Cable Manhole 600 x 600 x 600 mm with cover
Construction of masonry chamber of size (600 x 600 x 600)mm
clear finished internal size and constructed with 230 thick brick
wall in four side and 115 mm thick brick wall as partion in middle
in 1:4 (1 cement : 4 sand) for cable manhole, foundation
concrete 1:3:6 (1 cement: 3 sand : 6 aggregate 20 mm & down
grade), cement plaster and punning inside surface including the no. 8
cost of earth excavation/filling, PCC 1:2:4 at base, manhole
cover, etc. all complete as per drawings, specifications and
instructions of Engineer.
15 Soil cutting and back filling at a depth of 600 mm by putting PVC

pipe of following sizes of 6 kg pressure for cable pulling
providing and laying sand all around the pipe with 200 mm thick,
remaining part filling with soil and compacted, installing cable
markers, etc. all complete as per drawings, specifications and
i 75 mm PVC Pipe
Mtr. 134
ii 50 mm PVC Pipe
Mtr. 134
16 Supply, Installation, Testing & Commissioning of 11 m MS Pole

(150 mm dia upto 5 m and rest 6 m as 100 mm dia 5 mm tick
pc. 2
throughout) with necessary material to hand cable for both
power cable and LV cable.
Total Electrical Works :

Bill of Quantities
Project : UNOPS - Modernisation & Improvement of Policing project (MIPP) in Nepal: Construction of Nepal Police Buildings in Mahottari District
Location District Mahottari, Nepal
Units P S-Traditional Bhittamode and APO-A Gaushala, Mahottari, Nepal
Sub Item : Civil works
Item Description of Works Unit Quantity Rate In Figures
Rate in Words (NRs.) Amount (NRs.)
No. (NRs.)
DM Dismantling works
DM1a etc. at required location, all complete as per specifications and Job 1.00
instructions. (PS- Bhittamode)
DM1b etc. at required location, all complete as per specifications and Job 1.00
instructions. (APO- Gaushala)
Sub -total: Dismantling Works
G General
Clearing and grubbing of site for construction including uprooting
of vegetation, grass, brush wood, trees and sapplings of girth
G1 Sq.M 856.20
upto 300 mm & removal upto a distance of 50 m as per
Sub -total: General
E Earthwork
Earthwork in excavation in trenches, pits and foundations in soft
soil including existing debris and brick bats of old structure, if
any, upto specified depth including shoring, dressing of sides,
mechanical ramming of bottom, dewatering in foundation pits
E1 and trenches, if required, lifting of soil for minimum 2.0 m and Cu.M. 548.50
stacking soil to minimum height of 1m and lead upto 30m, all
750mm dia boring work for gravel column upto required depth
with drilling equipments and accessories in soft soil, all complete
E1a as per drawings, specifications and instructions R.M. 960.00
BOQ Mahottari Page 1 of 26

No. (NRs.)
Providing and placing of random filling of excavated earth
stacked at site or brought from burrow pit in 150mm thick layer in
trenches, plinth or under floor, sides of foundation and below
E6 beam at footing covered area etc. including watering, Cu.M. 466.30
mechanical ramming and compaction of each layer,
consolidation and dressing, all complete as per drawings,
Sand filling in plinth under floors, including watering, ramming,
E7 consolidating and dressing, all complete as per drawings, Cu.M. 43.20
Gravel filling in foundation below PCC, including watering,
E12 ramming, consolidating and dressing, all complete as per Cu.M. 23.30
Providing & placing well graded gravel & sand (2mm to 75mm)
filling in 750mm dia bored hole for gravel column, including
E13 Cu.M 466.60
watering, mechanical compaction, etc. all complete as per
drawings, specifications & instructions
Sub -total: Earthwork

No. (NRs.)
BW Brick work
Flat brick soling of local chimney bricks laid in line and level,
B1 including packing joints with sand, complete as per drawings, Sq.M. 353.50
specifications and instructions
First class brick work in cement and sand mortar of mix 1:4 with
chimney-made bricks, in any size and shape of wall, made to
required line, level, shape and plumb including setting out,
B4 soaking of bricks, curing of the works and scaffolding, etc. Cu.M. 277.80
First class half brick masonry works made with chimney made
bricks in cement mortar 1:4 (1 cement: 4 coarse sand) with
reinforcement (2 nos 8mm dia) as per detail in every fifth course,
embedded in cement mortar in wall of any size and shape, made
B5 to required line, level, shape and plumb including setting out, Sq.M. 863.30
soaking of bricks, curing of the works and scaffolding, etc.
Providing and laying Dachchi Appa brick cladding on exterior

wall of approved quality including 12.5 mm thick screeding with
B6 cement mortar of 1:4 (cement: sand), laying in required pattern, Sq.M. 134.10
line and level including lime and surkhi pointing, all complete as
per drawings, specifications and instruction.
Sub -total: Brick Work
CW Concrete Work
Plain cement concrete (PCC) of grade M10 (1:3:6 with 1 cement,
3 coarse sand and 6 aggregate of 19 mm and down grade) in
foundation base including mixing, laying, compacting, finishing,
CW1 curing, laid to exact line, level and dimensions, inclusive ofside Cu.M. 38.30
shuttering, complete as per drawings, specifications and
instructions

No. (NRs.)
Structural concrete (PCC for RCC) of Grade M20 works with
approved quality of cement, sand and well graded aggregate in
any form, size, shape and level including batching and mixing
CW3 with machine, laying including compaction with vibrating Cu.M. 382.60
machine, curing, testing and finishing, all complete as per
Placing plyboard form work with steel props, shuttering,

centering in horizontal/Vertical surfaces like slab, beams,
CW5 Sq.M. 2,995.00
column, wall, stair etc. for all RCC works of any shape, size & at
any level and removal after completion
Providing & placing steel reinforcement bar tested grade Fe-500
equivalent NS, for RCC work including bending, binding with
CW6 M.T. 53.90
anneal wire & placing in position, all complete as per drawings,
specifications & instruction
Sub -total: Concrete Work
FW Finishing works
12.5 mm thick cement plastering with 1cement : 4 sand mortar
on any level size & shape of wall, column, ceiling, band, blocks,
etc inclusive of dusting, throating, etc as required including
PL1 racking, watering, cleaning of base, plastering to plumb, line, Sq. M. 5,003.50
level, smooth etc. & curing, all complete as per drawings,
Two coat of plastic emulsion paint over two coat of primer,
P3 finished including surface preparation all complete as per Sq. M. 3,278.70
Providing & laying glazed ceramic tile (A-grade Kajaria, Orient or
equivalent) in required pattern & colour on walls with cement
P4 mortar of mix 1:4 backing & filling joints (epoxy grout), including Sq. M. 302.70
border tile, all complete as per drawings, specifications &
instructions.
Providing & laying stone finish ceramic tile in required pattern &
colour on exterior walls with cement mortar of mix 1:4 backing &
P4a filling joints (epoxy grout), all complete as per drawings, Sq.M. 132.50
P6 Two coat of enamel paint in mat finishing over two coat of
primer, finished including surface preparation all complete as per Sq. M. 185.20

No. (NRs.)
P7 Two coat of weather coat (Apex or equivalent) over required coat
of primer, finished including surface preparation all complete as Sq. M. 1,341.30
P8 Three coats of chopra polish, finished including surface
preparation all complete as per drawings, specifications and Sq.M. 68.60
instruction
P13 Providing & applying two coat of water based silane siloxane
paint on exposed brick wall including surface preparation all Sq. M. 134.10
complete as per drawings, specifications & instruction.
P14 Providing & fixing 12 mm thick water proof ply board panelling on
wall including wooden beading of approved quality all complete
Sq.M. 68.60
as per drawings, specifications & instruction.
WF1 Applying 2 mm thick white putty punning (Birla or equivalent) to

walls and ceilings in smooth and even finish, all complete as per Sq.M. 4,163.10
Sub -total: Finishing Work
F Flooring
Providing & placing 50 mm thick Plain cement concrete of grade
M15 (1:2:4 with 1 cement, 2 coarse sand & 4 aggregate of 19
mm and down grade) in the floor base including water proofing
compound, mixing, laying, compacting, finishing, curing, laid to
F1 exact line level & dimensions (floor concrete is laid in alternate Sq.M. 471.30
panels of 1 m x 1 m) inclusive of shuttering complete as per
Providing & placing 38 mm thick Plain cement concrete of grade

M15 (1:2:4 with 1 cement, 2 coarse sand & 4 aggregate of 19
mm and down grade) in the floor base including water proofing
compound, mixing, laying, compacting, finishing, curing, laid to
F2 exact line level & dimensions (floor concrete is laid in alternate Sq.M. 759.90
panels of 1 m x 1 m) inclusive of shuttering complete as per
Providing and laying vitrified, monolithic straight edge tile

(600mm X 600 mm) for floor over 30 to 40 mm thick cement
F3 sand mortar of mix 1:6 backing and filling joints with epoxy grout Sq.M. 492.30
and pigment, all complete as per drawings, specifications and
instructions.

No. (NRs.)
Providing and laying 3 mm cement punning in floor of 1:1
(cement : screened sand) over 12.5 mm thick cement screeding
F5 of 1:3 ( cement : sand) laying in required pattern, line and level Sq.M. 236.10
including curing all complete as per drawings, specifications and
instruction.
Providing and placing 75 mm high, 3 mm cement punning
skirting of 1:1 (cement : screened sand) over 12.5 mm thick
F8 cement plaster of 1:2 ( cement : sand) laying in required pattern, R.M. 101.30
line and level including curing all complete as per drawings,
Providing and placing 75 mm high, vitrified, monolithic tile
skirting over 12.5 mm thick cement plaster of 1:2 ( cement :
F8a sand) laying in required pattern, line and level including curing R.M. 467.00
all complete as per drawings, specifications and instruction
Providing and laying approved brand quality, pattern and colour

glazed ceramic tile (A-grade Kajaria, Orient or equivalent) on
F9 floor over cement mortar of mix 1:4 backing and filling joints Sq. M. 87.00
(epoxy grout) complete as per drawings, specifications and
instructions.
F11a Providing and laying 16 mm thick Rajnagar white or equivalent
marble in staircase steps of approved colour and quality
including 20 mm thick screeding with cement mortar of 1:2
(cement: sand), laying in required pattern, line and level all Sq. M. 27.10
F12 Providing & laying 75 mm high, 16 mm thick Rajnagar white or

equivalent skirting of approved colour & quality all complete as R.M. 14.00
per drawings, specifications and instruction
F33 Providing and fixing solid seasoned sisum wood parquet
(150x30x8mm) of approved quality all complete as per drawings, Sq.M. 53.30
Providing & fixing Window fins of 9 mm thk cement boards on
F35 both sides of medium weight MS square pipe of 32 mm as per Sq.M. 26.60
specification, drawings & instructions all complete
Sub -total: Flooring

No. (NRs.)
DW Doors, Windows and Ventilators
Sal wood work in chaukhat for windows, doors & ventilators with
seasoned sal wood including cost of holdfast, screws, etc. &
grouting with cement concrete 1:2:4 (1 cement, 2 coarse sand
W1 and 4 graded stone aggregate, 19 mm & down gauge) & Cu.M. 3.30
applying hot bitumen to the surface contacting wall, floor, ceiling,
beam, lintel etc. complete as per drawings, specifications and
instructions.
38 mm thick flush door shutter made with seasoned sal wood
frame cover with 3 mm thick plywood and finished with 1 mm
thick laminate on both side, fixing in position providing required
W2 heavy fittings viz. hinges, tower bolts, mortise lock/ aldrop, door Sq.M. 42.30
closer and pad lock complete as per drawings, specifications
and instructions.
38 mm thick pannelled, partially glazed door shutter made with
seasoned Sal wood frame, fitted with 5 mm thick float glass,
fixing in position providing required heavy fittings viz. hinges,
W3 tower bolts, mortise lock/ aldrop, door closer and pad lock Sq.M. 5.60
38 mm thick Stainless Steel mosquito proof-mesh door shutter

with expanded metal, made with seasoned Sal wood frame,
fixing in position providing required heavy fittings viz. hinges,
W4 tower bolts, mortise lock/ aldrop, door closer and pad lock Sq.M. 17.80
38 mm thick Stainless Steel mosquito proof-mesh window

shutter with expanded metal made with seasoned Sal wood
W4a frame, fixing in position providing required heavy fittings viz., Sq.M. 43.50
hinges, tower bolts, hooks and complete as per drawings,
38 mm glazed window shutter made with seasoned Sal wood
frame and fitted with 5 mm thick float glass, fixing in position
W5 providing required heavy fittings viz., hinges, tower bolts, hooks Sq.M. 43.50
and complete as per drawings, specifications and instructions.
W7 Providing and fixing 5 mm thick fixed float glass to wooden frame

with wooden bead, all complete as per drawings, specifications Sq.M. 19.40
and instruction.
W7a Providing and fixing 5 mm thick float glass louvers to wooden
frame with wooden bead, all complete as per drawings, Sq.M. 6.00
No. (NRs.)
Providing and fixing the typical Nepalese wooden window
W12 (Aankhi Jhyal) of sal wood with traditional carving, all complete Sq.M. 7.80
as per drawings, specifications and instruction.
Providing & fixing standard anodized aluminium casement
windows, partly openable & partly fixed , using sections(88mm x
38mm x 1.2 mm), complete with 5 mm float glass, hinges, bolts,
AL1 locks, weather strips, handles, chemicals & necessary fittings Sq.M. 137.50
including fly mesh shutter, all complete as per drawings,
Providing & fixing standard anodized aluminium casement doors
using sections (101mm x 45mm x 1.5mm), complete with 5 mm
float glass &/ or 9 mm thick laminated boards in approved
AL3 colour, approved bolts, locks, weather strips, door closer, Sq.M. 114.00
handles, chemicals & necessary fittings all complete as per
drawings, specifications & instruction.
Sub -total: Doors, Window and Ventilators
WP Water proofing
Providing water proofing treatment to roofs or floors by using
flexible waterproof coating followed by brushed of minimum 1
mm thickness, including surface preparation, curing, etc.
WP8 complete in accordance with manufacturer's directions, Sq.M. 535.00
drawings, specifications & instructions (Make: ACME-
Tapelastic/Waterguard A/Polyalk WP/Polyflex WP or superior)
Sub -total: Water Proofing

No. (NRs.)
RF Roofing
Tubular roof trusses with rafter, purlins, wind ties, brackets, etc.
made with medium grade mild steel tubes & mild steel sections
of required sizes, including hoisting, fixing in position with MS
bed plates, shoe angles, anchor bolts & cement grouting as per
RF1 drawings, specifications & instruction, complete with all material Kg. 566.30
& labour for providing, fabrication & fixing, with two coats of
anticorrosive paint & base concrete, all complete
Providing & fixing in position 3 mm thick clear compact Lexan

polycarbonate sheet over roof truss, inclusive of nuts & bolts, 8
RF2 Sq.M. 5.20
mm 'J' hooks, washers, GI cup washers, all complete as per
Providing and placing 75 mm thick foam concrete block (Size
300mmx300mm and Density-900 kg/Cu.M.) on roof floor over 1
RF3 cement : 6 sand mortar and pointing with 1 cement : 2 sand Sq.M. 260.50
mortar all complete as per drawings, specifications and
instruction
Providing and placing 25 mm thick clay (Telia) tile flooring over 1
lime : 2 surkhi mortar and pointing with 1 cement : 1 sand mortar
RF4 Sq.M. 273.10
all complete as per drawings, specifications and instruction
Providing and fixing jhinguti clay tile on the sloping roof concrete
surface with polymer modified, rigid, high quality cementitious
RF5 tile adhesive (Sika Tilofix or equivalent) including surface Sq.M. 199.90
preparation, tile grout etc., all complete as per drawings,
Providing and fixing in position 24 gauge (0 .5 mm thick) CGI
sheet over roof truss with minimum 80 mm side laps and 200
RF7 mm end laps, inclusive of nuts and bolts, 8 mm 'J' hooks, Sq. M 73.30
washers, GI cup washers, all complete as per drawings,
Sub -total: Roofing

No. (NRs.)
LD Land Development
LD1 Sq.M. 27.60
Sub -total: Land Development
ELD Exterior Land Development

Preparation of subgrade for interlocking paving blocks laying by
cutting and filling with compaction work up to 20cm high in
ELD1 Sq.M. 457.90
general soil in driveways areas, complete as per specifications
and drawings.
Supplying & laying of 60 mm thick heavy duty interlocking paving
blocks of approved colour & quality on the 50 mm thick stone
ELD2 Sq.M. 457.90
dust base in driveways & parking areas, complete as per
specifications & drawings.
ELD5 Sq.M. 92.00
Sub -total: Exteriror Land Development

No. (NRs.)
MS Mild Steel Works
Providing & fixing MS work over roof truss at sloping roof base
with sheet & frame etc. complete with all material and labour for
MS5 providing fabrication & fixing, with two coats of anticorrosive Kg 287.40
paint & two coat of final painting etc, all complete as per
drawings, specifications & instruction.
Providing and fixing of grill window with two coats of anti-
corrosive base coat and two coats of enamel paint (4.5x20 mm
MS7 Sq.M. 46.10
MS plate and 12 mm square bar) in position, all complete as per
Providing and fixing of lock-up grill of 20 mm dia MS bar and
50x50x4 ISA framing including grill gate for entrance with locking
MS8 arrangement with two coats of anti-corrosive base coat and two Sq.M. 32.30
coats of enamel paint, all complete as per drawings,
Providing and fixing of MS member (pipe,angle, plate, etc) for
ladder, staircase step nosing, openable hatch and support to
brickwall at beam slab soffit etc. with two coats of anti-corrosive
MS10 base coat and two coats of enamel paint (if required) in position, Kg. 2,759.50
all complete as per drawings, specifications and instruction.
Sub -total: Mild Steel Work
M Miscellaneous
Staircase and verandah railing with one 50 mm dia and two 25
mm dia medium MS pipe horizontal rails and 32 mm dia, 900
mm high medium MS pipe balusters spaced at 600 mm c/c in
the verandah and one on alternate tread of the staircase,
M8 including 10X10mm MS Solid bar combination and painting with R.M. 121.00
two coats of anti corrosive metal primer and two coats of enamel
paint, all complete as per drawings, specifications and
instruction
Staircase and verandah railing in interior staircase area with one
wooden hand rail and 32 mm dia, 900 mm high medium MS pipe
balusters spaced at 600 mm c/c in the verandah and one on
M8a altenate tread of the staircase with MS member framing R.M. 23.90
combination, all complete as per drawings, specifications and
instruction
M8b member framing and wooden hand rail cover, all complete as R.M. 7.80
per drawings, specifications and instruction

No. (NRs.)
M8b-1 member framing and 50mm dia MS pipe hand rail, all complete R.M. 5.30
as per drawings, specifications and instruction
Front, side step and ramp railing with one 50 mm dia MS pipe
(wall thk=3.65mm) hand rail and two 25 mm dia MS pipe (wall
thk=3.25) horizontal rails and 38 mm dia MS pipe (wall
thk=3.25), 900 mm high medium MS pipe balusters spaced at
M8c 900mm c/c (on avg) on the ramp and one on altenate tread of R.M. 92.00
the staircase, including painting with two coats of anti corrosive
metal primer and two coats of enamel paint, all complete as per
Railing with three 32 mm dia stainless steel pipe horizontal rails

and 50 mm dia, 900 mm high mediam stainless steel pipe
M8d balusters spaced at 300 mm c/c including one flap entrance , all R.M. 7.60
Terrace railing with one 35 mm dia MS pipe (wall thk=3.25mm)

horizontal rail on 300mm high 35 mm dia MS Pipe (wall thk
M10 =3.25 mm) balusters spaced at 520 mm c/c, finished with R.M. 45.50
enamel paint of approved colour, all complete as per drawings,
Providing and fixing in position 4 mm float glass mirror fixed on 9
mm marine ply, all complete with wooden framing in seasoned
M41 Sq.M. 18.10
Shesham wood with SS studs screw as per drawings,
Making the typical decorative cement sand (1:3) plaster cornice
M43 for exterior window/door/wall with complete finishing as per R.M. 102.70
drawings instruction and specifications.
Providing & fixing decorative traditional Nepaliese brick on pillar
M44 pedastal and corbel, all complete with finishing as per drawings, Nos. 2.00
instruction and specifications.
Construction of typical Nepalese style niche at exterior wall, all
M45 complete with finishing as per drawings instruction and Nos. 12.00
specifications.
Proving & fixing in place 1.5 mm thick slip membrane in sliding
joints, including smoothening of receiving surface through steel
M46 trowelling, all complete as per drawings, specifications and Sq.M. 2.70
instruction.
M47 Proving & fixing in place chicken wire mesh at column - brick Sq.M. 99.00
wall junction, all complete as per drawings, specifications and
instruction.

No. (NRs.)
M48 Providing and fixing aluminium floor joint (Series JDH 6.08-050 R.M. 1.20
Multidirectionnal movements, standard load, 50mm width x
43mm height-make-VEDA france or equivalent) between
staircase landings, all complete as per drawings, specifications
and instruction.
M51 Providing and fixing GI sheet (24 gauge) chimney with exhaust Set 1.00
fan above the kitchen counter as per drawings and specifications
M52 Supply and placing of 25 mm thick polystyrene strip in between R.M. 494.90
masonary wall and column joint gap, all complete as per drawing
instruction and specification.
M53 Supply and mixing water proofing compound (Dr. Fixit Pidiproof Lt 53.00
LW+ or equivalent) 200 ml in one bag of cement in plinth beam
and DPC concrete mix during casting, all complete as per
specification and instruction.
Sub -total: Miscellaneous
Total: Civil Works

No. (NRs.)
Bill of Quantities
Units P S-Traditional Bhittamode and APO-A Gaushala,
Mahottari, Nepal
Supplying and Installation of Sanitary & Plumbing Work: Sub Item : Sanitary Works
Item Rate In
No.
(NRs.)
A. Fixtures:
1 Water Closet Set:
a. Water Closet Set - Type: 'WC-1' consisting of White Ceramic
Floor Mounted Closed Coupled Water Closet Basin (WC) 'S'
Trap along with Duel Mode Flushing Cistern, Seat & Cover, set 3
Regulating (Angle) Valve, Toilet Paper Holder, Bib Cock, Robe
Hook, etc. as per Schedule - I
b. Water Closet Set - Type: 'WC-2' (for Persons with Physical
Limitations) consisting of Wall Mounted Water Closet Basin
(WC) 'P' Trap along with Duel Mode Concrealed Flushing
Cistern, Seat & Cover, Toilet Paper Holder, Health Faucet, a pair set 2
of Hinged Drop Down Support Arms, a pair of Grab Bar, Robe
Hook, etc., as per Schedule - I
2 Squatting (Asian) Pan Set:
a. Squatting Pan Set - Type: 'SP-1' consisting of White Ceramic
Floor Mounted Squating (Asian) Pan with PVC 'P' Trap, Duel
Mode Plasting Flushing Cistern, Flushing Long Bend , set 18
Regulating (Angle) Valve, Bib Cock, etc. as per Schedule - I

No. (NRs.)
3 Wash Basin Set:
a. Wash Basin Set - Type: 'WB-1' consisting of White Glazed
Vitreous China Porcelain Corner Basin, CP Pillar Cock, Bottle
Trap, Regulating (Angular) Valve for water feeder pipe line, set 2
Connecter Tube, Soap Dish, Towel Hook, etc as per Schedule-I
b. Wash Basin Set - Type: 'WB-2' consisting of White Glazed
Vitreous China Porcelain Wall Hung Rectangular Lavatory
Basin, CP Pillar Cock, Bottle Trap, Regulating (Angular) Valve set 11
for water feeder pipe line, Connecter Tube, Soap Dish, Towel
Hook, etc as per Schedule-I
c. Wash Basin Set - Type: 'WB-3' (for Persons with Physical
Limitations) consisting of White Glazed Vitreous China
Porcelain Wall Hung Rectangular Lavatory Basin, Pillar Cock,
set 2
Bottle Trap, Regulating (Angular) Valve for water feeder pipe
line, Towel Rail, Soap Dish, a pair of Hinged Drop Down Support
Arms, etc as per Schedule-I
4 Hand Wash Trough Set:
a. Hand Wash Trough Set - Type: 'HWT-1' consisting of Masonary
Hand Wash Trough (Local & Civil Work), CP Bib Cock (2 sets),
set 4
Bottle Trap, Waste, Towel Hook x 2, Soap Dish, etc as per
Schedule-I
5 Urinal Set:
a. Urinal Set - Type: 'UR-1' consisting of White Glazed Vitreous
China Porcelain Flat Back, Wall Hung Urinal Basin, Trap, CP
set 3
Push Valve for Urinal, Connecter Tube, etc as per Schedule-I
6 Shower Unit Set:

a. Shower Unit set - Type: 'SH-1' consisting of Concealed Valve,
Head Shower, Arm, Bib Cock, Soap Dish, Towel Hook, etc. as set 7
per Schedule - I
7 Stainless Steel Kitchen Sink Set:
a. Kitchen Sink Set - Type: 'KS-1' consisting of Pressed Stainless
Steel (as per AISI: 304) Kitchen Sink having Single Bowel,
Waste and Bottle Trap, Sink Cock with Swivel Spout, Towel set 3
Hook, Soap Dish, etc. as per Schedule - I

No. (NRs.)
8 Floor Drain Set:
a. Floor Drain Set - Type: 'FD-1' consisting of uPVC Nahani Trap
of Ø 110 mm x Ø 75 mm size and Stainless Steel (SS) Insect set 33
Proof Grating, etc. as per Schedule - I
9 Water Transfer Pumping Set:
a-PS. Electrical Water Transfer Pumping Set - 'Type -WP-1' consisting
set 1
head (including Suction + Delivery + Friction Loss of the Pipe)
with NB 25 mm (1") suction & delivery pipe sizes, etc as per
Schedule - 1
a-APO. Electrical Water Transfer Pumping Set - 'Type -WP-1' consisting
head (including Suction + Delivery + Friction Loss of the Pipe) set 1
with NB 25 mm (1") suction & delivery pipe sizes including Water
Level Control Switch for Over Head & Ground Water Tanks, etc
as per Schedule - 1
10 Over Head Water Storage Tank Set:
a. Over Head Water Storage Tank Set - 'Type-WT-1' consisting of
500 litres capacity Moulded High Density Polyethylene Water
set 6
Storage Tank having Lockable Cover and necessary connection
for Inlets, Out lets, Over Flow & Drain Pipe line, etc as per
11 Schedule -I
Waste storage bins Set:
a. Supply of 300 liter capacity 3 Nos. Color coded waste storage
bins for waste storage and disposal purpose as per Schedule-I. set 4
Sub total of 'A':

No. (NRs.)
B. Pipe Line (Inside Building and Duct):
1
Water Supply Pipe Line (Hot and Cold from Over Head Tanks / Hot Water Storage Tank to the Toilets & Kitchens Fixtures):
Pipe Line Inside the Toilet Block up to Ducts:

a. Cold Water Supply Pipe Line from Duct to the Toilets and
Kitchens of the following sizes in Chlorinated Poly Vinyl Chloride
(C-PVC) Pipes of SDR-11 in Copper Tube Size (CTS) as per
ASTM - D 2846 of 'MARVEL' of Nepal with necessary C-PVC
Pipe Fittings (in Socket joints) of SDR-11 in CTS as per ASTM -
D 2846 of 'MARVEL', Nepal in C-PVC Solvent Cement (as per
ASTM: 493) joints including necessary Pipe Sleeves in the walls,
Brackets, Clamps, Hangers etc. of approved type also making
holes, pockets, etc. in walls or floors and making good the same
to the original condition, testing the pipe line with hydraulic
pressure of 10 kg/sq cm, rectifying the leakage, if any, all
complete as per specification and instruction.
- C-PVC Pipe of CTS ½" size (SDR-11) rm 115.00
- C-PVC Pipe of CTS ¾" size (SDR-11) rm 65.00
- C-PVC Pipe of CTS 1" Size (SDR-11) rm 145.00
- C-PVC Pipe of CTS 1¼" size (SDR-11) rm 18.00
- C-PVC Pipe of CTS 1½" size (SDR-11) rm 8.00

No. (NRs.)
b. Valves:
C-PVC or uPVC Ball Valve of 'ASTRAL', India of the following pipe size:
- for CTS ½" Pipe Line size no 16
- for CTS ¾" Pipe Line size no 8
- for CTS 1" Pipe Line size no 8
- for CTS 1¼" Pipe Line size no 2
- for CTS 1½" Pipe Line size no 4

No. (NRs.)
c. Foot Valve:
GM Foot Valve of "LEADER / ZOLOTO" as pe India Standared (ISI) of the following pipe size:
- for CTS 1" Pipe Line size for Water Pumping Set no 2
2 Soil, Waste and Rain Water Drainage Pipe Line (from Toilets to the ducts):
Soil & Waste Water Pipe Line (from toilets to the ducts only)
having Lead Free Unplastisied Poly Vinyl Chloride (uPVC-
EcoDrain) Pipes conforming to Indian Standard (IS:4985 &
IS:7834) of "MARVEL" of Nepal and all necessary Lead Free
Poly Vinyl Chloride (uPVC-Ecodrain) Pipe Fittings conforming to
Indian Standard (IS:14735) of 'MARVEL' of Nepal of the
following sizes in uPVC Adhesive Cement Solvent and / or 'O'
Ring Socket Joints with necessary uPVC Pipe Fittings including
Commode Sockets with or without Clean Outs as per the
condition, cutting the Pipes to the required lengths and fixing
pipe sleeves in the wall, clamps, hangers, brackets, etc. of
approved type including making holes/pockets in walls or floor
and making good the same to the original condition, testing the
pipe line by Smoke Test, rectifying the leakage, if any, all
complete as per the specification and instruction
- OD 50 mm (4.0 kgf/sq cm) rm 33.00
- OD 75 mm (4..0 kgf/sq cm) rm 154.00
- OD 110 mm (4.0 kgf/sq cm) rm 235.00
- OD 160 mm (4.0 kgf/sq cm) rm 25.00

No. (NRs.)
3 Sewer Pipe Line (Out side the Building including Rain Water):
a. Sewer Pipe Line having High Density Poly Ethylene (HDPE)
Pipes of "PANCHKANYA or Nepatop" conforming to Nepal
Standard (NS:40) - Working Pressure: 4 kgf per cm² of the
following sizes in Butt Welded Joints, cutting the Pipes to the
required lengths, testing the pipe line by Smoke Test, rectifying
the leakage, if any, all complete as per the specification and
instruction
- OD 110 mm (6.0 kgf/sq cm) rm 325.00
- OD 160 mm (6.0 kgf/sq cm) rm 85.00
Sub total of 'B':
C. Civil Work (as per the Design, Drawing & Specification):

- Septic Tank (for 20 users) no 1
- Septic Tank (for 50 users) no 1
- Manholes (600 mm x 600 mm) with CI Cover (24" X 24" size) no 44

and CI Frame
Grease Trap no 2
- Grease Interceptor no 2
- Recharge Well for Rain Water no 2
Sub total of 'C':
Total (A + B + C):

No. (NRs.)
Bill of Quantities
Units P S-Traditional Bhittamode and APO-A Gaushala,
Mahottari, Nepal
Supplying and Installation of Electrical Works: Sub Item : Electrical Works
Item Description of Works Unit Quantity Rate In
No. Figures Rate in Words (NRs.) Amount (NRs.)
(NRs.)
1. Main Distribution Boards/Final DB'S make: SIEMENS /L&T
/LEGRAND)
Supply of following SMDB fabricated out of 2 mm thick CRCA
sheet wall mounted, dust and vermin proof 16/14 gauge CRCA
sheet steel shall be used for panels. Cable gland plates shall be
provided on top of the panels. Panels shall be treated with all
anticorrosive process before painting as per specifications with 2
coats of zinc chromate primer and final approved shade of
enamelled paint.1 No. earthing terminals shall be provided for all
distribution panels. Panels shall be suitable for 415V, 3-phase, 4-
wire, 50Hz supply system .
Approval shall be taken for each panel before fabrication.
Galvanized hardwares with zinc passivation shall be used in
fabrication of panels.
MAIN PANEL
Incoming :
1a-PS. ii) 32A 4 pole Changeover Nos. 1
Outgoings :
1b-PS. 6 WAYS TPN DB( Ground+first floor)
Incoming :
Nos. 2
Outgoings :
i) 18 Nos.6/16 A, SP MCB (10KA)

No. (NRs.)
1a-APO. MAIN PANEL
Incoming :
ii) 32A 4 pole Changeover Nos. 1
Outgoings :
1b-APO. 6 WAYS TPN DB( Ground+first floor)
Incoming :
Nos. 2
Outgoings :
i) 18 Nos.6/16 A, SP MCB (10KA)
1c-APO. 4 WAYS TPN DB( Second floor)
Incoming :
Nos. 2
Outgoings :
i) 12 Nos.6/16 A, SP MCB (10KA)
2 Supply, laying, testing & commissioning of the following types of
cables pulled in HDP Conduit & end termination on both side of
cable with necessary gland & lugs
Brand: Mahalaxmi /Prakash/pioneer Cable or equivalent
a 4 Core10 mm2 cu. armoured XLPE CABLE for DB main supply
m 150
b. 4 Core 6 mm2 cu. unrmoured XLPE CABLE for DB main supply

m 75
c 1 Core 6 mm2 cu. unrmoured XLPE CABLE for DB main supply

m 100

No. (NRs.)
Supply and making of earth pits to construct a LORESS
Maintenance free Earth with following specification complete
with excavation, back filling, effecting connections testing and
commissiong including providing and fixing masoanry chamber
and hinged cover.The material used for this are
i) Copper Bonded Electrodes of required length to achieve

3 required level. Nos. 4
ii) LORESS Earth enhancing compound
iii) Rod to Cable Clamp
iv) Copper Bus Bar(300 x 25 x3 ) mm
v) Insulator
vi) 16 Sq mm copper cable to connect the earthpit to earth
busbar in equipment room of approx. length-10 m.
4 Wiring for Light points/ exhaust fan points/ ceiling fan points,
ceiling fan regulators with 2x2.5 +1x1.5 sq copper conductor
wires in suitable size PVC conduit including , circuit wiring
from DB to switch via electric points , wall chasing and making
good with cement etc as per site requirement, the rate should Points. 271
include switch also.The cost should include testing of complete
wiring system. wire make: prakash, mahalaxmi, pioneer
4.1 Wiring for ceiling fan points, ceiling fan regulators with 2x2.5
+1x1.5 sq copper conductor wires in suitable size MS conduit
including , circuit wiring from DB to switch via electric points ,
wall chasing and making good with cement etc as per site Points. 2
requirement, the rate should include switch also.The cost should
include testing of complete wiring system. wire make: prakash,
mahalaxmi, pioneer
5 Wiring for 6/16 amp sockets with 2x4 + 1 x 2.5sq copper
conductor wires running to 20 mm conduit.The cost is including
socket .The cost should include testing of complete wiring Points. 70
system. wire make: prakash, mahalaxmi, pioneer
6 Conduiting for external light provision with suitable size PVC

conduit from DB to electric points with nylon rope pulled inside
Points. 36
from DB to points for future provision of wire pulling.

No. (NRs.)
7.0. FANS & LIGHTING FIXTURES ( Philips or equivalent), The
rate should include bulb cost and fixing accessories.
a Supply, Installation, Testing & Commissioning of 15 watt (
b Supply, Installation, Testing & Commissioning of 24 watt (
c Supply, Installation, Testing & Commissioning of 6 watt led panel
with controller and necessary material.of philips make SM518C-
6500k, 900 Lumen,1600 lux white/grey colour or equivalent in Set 53
fiam
d Supply, Installation, Testing & Commissioning of 8 watt led
internal bulkhead light with controller and necessary material.of Set 33
e Supply, Installation, Testing & Commissioning of 8 watt led
external bulkhead light with controller and necessary material.of Set 49
f Supply, Installation, Testing & Commissioning of flood light with
IP 65 grade and necessary material.of philips or equivalent in Set 11
wipro
g Supply, Installation, Testing & Commissioning of 42" ceiling fan
of usha or almonard make Set 34
h Supply, Installation, Testing & Commissioning of 12" metal

exhaust fan of usha or almonard make Set 14
i Supply, Installation, Testing & Commissioning of exit light of

samcon make Set 5

No. (NRs.)
8 Telephone/TV system(Honeywell/siemens OR EQUIVALENT
a Supply and installation of 10 pair telephone tag blocks including

Nos. 5
box all complete
b Supply and laying of folloiwing telephone cables with .51 mm
dia copper conductor, twisted pair, vapour barrier ,color coded
unarmoured cables in trunking including effecting terminations RM 60
on both sides
10 Pair cable
c Point wiring for Telephone point with 4 pair 0.51dia cable(Cat-6)
running in 20 mm conduit including effecting terminations on
Nos. 28
both sides,chasing walls as required.The rate should include
telephone socket..
d Point wiring for TV point with RG-6 cable running in 20 mm
conduit including effecting terminations on both sides,chasing
Nos. 10
walls as required..the rate should include TV socket.
e Supply and installation of 4 ways TV Splitter including box all

Nos. 4
complete
9 CCTV System, Brand: Sony/Bosch
a wiring for cctv points with cat-6 cu. Cable of digicom or D-link
make in 20 mm conduit from respective Hub for networking. Nos. 11
10 COMPUTER POINT WIRING

a Wiring for computer points with cat-6 cu. Cable of digicom or D-
link make in 20 mm conduit from respective Hub for networking. Nos. 18
b Supply , installation, testing of computer Network socket with

single module face plate and modular jack Nos. 18
c Supply, Installtion, testing, commissioning of following Network

switch with 13 Patch Panel & patch cord
i 8 port Network Switch - Cisco small business series
Nos. 4
ii Patch cord
Nos. 36
11.0 Lightening protection system with Lightening strike & 25 m long

horizontal run 25 x 3 mm copper strip installed in roof with all Nos. 2
necessary equipment complete as package.
12.0 145 watt PV Module Solar panel with Charge controller, Nos. 4
mounting frame suitable for charging 200 AH Battery as of item
no. 11.

No. (NRs.)
13.0 Supply, installation, testing & commissioning of 800 VA Invertor Nos. 2
with 200 AH Tubular battery sinewave of EXIDE make with all
necessary material required for operation.
14 Cable Manhole 600 x 600 x 600 mm with cover
Construction of masonry chamber of size (600 x 600 x 600)mm
clear finished internal size & constructed with 230 thick brick wall
in four side and 115 mm thick brick wall as partion in middle in
1:4 (1 cement : 4 sand) for cable manhole, foundation concrete
1:3:6 (1 cement: 3 sand : 6 aggregate 20 mm & down grade), no. 5
cement plaster & punning inside surface including the cost of
earth excavation/filling, PCC 1:2:4 at base, manhole cover, etc.
all complete as per drawings, specifications & instructions of
Engineer.
15 Soil cutting & back filling at a depth of 600 mm by putting PVC

pipe of following sizes of 6 kg pressure for cable pulling
providing & laying sand all around the pipe with 200 mm thick,
remaining part filling with soil & compacted, installing cable
markers, etc. all complete as per drawings, specifications &
i 75 mm PVC Pipe
Mtr. 84
ii 50 mm PVC Pipe
Mtr. 84
16 Supply, Installation, Testing & Commissioning of 11 m MS Pole

(150 mm dia upto 5 m & rest 6 m as 100 mm dia 5 mm tick
pc. 2
throughout) with necessary material to hand cable for both
power cable & LV cable.
Total Electrical Works:

Document 8-Annex - C - BOQ-003-Dhanusha and Mahottari

Uploaded by

Copyright:

Available Formats

Document 8-Annex - C - BOQ-003-Dhanusha and Mahottari

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Document 8-Annex - C - BOQ-003-Dhanusha and Mahottari

Uploaded by

Copyright:

Available Formats

Annex-C: Bill of Quantities (To be submitted with Financial Proposal Only)

1 Civil Works (Mahottari and Dhanusha)

Sanitary Works (Mahottari and

4 Sub Total (1+2+3)

Equipment for Field Laboratory

6 Insurance (Provisional Sum) 1,000,000.00 One million NRs.

7 Sub - Total (4+5+6)

Grand Total (7+8)

Sub -total: Dismantling Works

Sub - total: General

Providing and placing of random filling of excavated earth

BOQ Dhanusha Page 1 of 24

Sub - total: Earthworks

Sub - total: Brick Works

BOQ Dhanusha Page 2 of 24

Placing plyboard form work with steel props, shuttering,

Sub - total Concrete Works

BOQ Dhanusha Page 3 of 24

Sub - total: Finishing Works

BOQ Dhanusha Page 4 of 24

Providing and placing 38 mm thick Plain cement concrete of

Providing and laying vitrified, monolithic straight edge tile

BOQ Dhanusha Page 5 of 24

Providing & laying 75 mm high, 16 mm thick Rajnagar white or

Sub - total: Flooring

DW Doors, Windows and Ventilators

Sub - Total: Doors, Windows and Ventilators

BOQ Dhanusha Page 6 of 24

Sub - total: Water Proofing

Providing & fixing in position 3 mm thick clear compact Lexan

BOQ Dhanusha Page 7 of 24

Sub - total: Roofing

Sub - total: Land Development

ELD Exterior Land Development

Sub -total: Exterior Land Development

BOQ Dhanusha Page 8 of 24

Sub - total: Mild Steel Works

BOQ Dhanusha Page 9 of 24

Railing with three 32 mm dia stainless steel pipe horizontal rails

Terrace railing with one 35 mm dia MS pipe (wall thk=3.25mm)

BOQ Dhanusha Page 10 of 24

Supply and placing of 25 mm thick polystyrene strip in between

Sub - total: Miscellaneous

Total: Civil Works

BOQ Dhanusha Page 11 of 24

BOQ Dhanusha Page 12 of 24

b. Wash Basin Set - Type: 'WB-2' consisting of White Glazed

6 Shower Unit Set:

BOQ Dhanusha Page 13 of 24

10 Over Head Water Storage Tank Set:

Sub - total of 'A':

BOQ Dhanusha Page 14 of 24

- C-PVC Pipe of CTS ½" size (SDR-11) rm 120.00

- C-PVC Pipe of CTS ¾" size (SDR-11) rm 60.00

- C-PVC Pipe of CTS 1" Size (SDR-11) rm 190.00

- C-PVC Pipe of CTS 1¼" size (SDR-11) rm 30.00

- C-PVC Pipe of CTS 1½" size (SDR-11) rm 10.00

BOQ Dhanusha Page 15 of 24

BOQ Dhanusha Page 16 of 24