Scribd
Upload
171 views2 pages

Data Sheet

This document summarizes the FA5571 series of low standby power quasi-resonant controllers. It features an internal 500V high voltage startup current source that allows for less than 1W input power at 0.7W load output through intermittent operation. It provides quasi-resonant operation for low noise and high efficiency. Protections functions include overload, overvoltage, and winding short protections. Applications include LCD TV/monitor and notebook computer adapter main and standby power supplies. Specifications include startup current, voltage ranges, current limits, soft-start time, and comparison to conventional models.

Uploaded by

moslem clothwear
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
171 views2 pages

Data Sheet

This document summarizes the FA5571 series of low standby power quasi-resonant controllers. It features an internal 500V high voltage startup current source that allows for less than 1W input power at 0.7W load output through intermittent operation. It provides quasi-resonant operation for low noise and high efficiency. Protections functions include overload, overvoltage, and winding short protections. Applications include LCD TV/monitor and notebook computer adapter main and standby power supplies. Specifications include startup current, voltage ranges, current limits, soft-start time, and comparison to conventional models.

Uploaded by

moslem clothwear
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Power Electronics

FA5571 series

Low Standby Power Quasi-Resonant Controller

■ Features
・Internal 500V high voltage startup current source
・Realized less than 1W input at 0.7W load by intermitting
・Quasi-resonant operation, low noise and high efficiency
・Numerous kind of protect functions

■ Applications
・LCD TV/Monitor Main and Standby SMPS
・Note PC Adapter

■ Specifications
・Startup current source 7mA, 1.6mA at VCC=0V, 30uA at off
・VCC voltage range 9 to 26V
・OUT pin peak current sink 500mA, source -250mA ■ Circuit block
・Soft-start time 2.6ms
・IS current limiter 1V±0.1V, Windings shorted protection 2V
・ZCD OVP protection 7.2V ( Latched)
・OLP timer auto-recovery switching on/off is 0.2/1.4 sec
(Prepared in FA5571 series OLP auto-recovery and latched)
■ Example of power supply configuration

■ Standby power and efficiency (power supply specifications: output power - 19V, rating - 5 A)

Input AC Voltage [Vac]

■ Comparison between FA5571 series models and conventional models


Conventional models FA5571 series (new models)
Item FA5531 FA5532 FA5541 FA5542 FA55771 FA5572 FA5573 FA5574
1 Light-load operation Frequency reduction Intermittent operation Intermittent operation Frequency reduction
2 Intermittent operation ― 0.34V 0.4V ―
start FB voltage
3 Frequency reduction 1.3V ― ― 1.15V
start FB voltage
4 Overload operation Auto recovery Timer latch Auto recovery Timer latch Auto recovery Timer latch Auto recovery Timer latch
5 Reduced current at VH 8mA when VCC is shorted 7.6mA when VCC is shorted Limited VH current when VCC voltage is low
pin when VCC is shorted (current-limiting resistor is (current-limiting resistor is IVH＝1.6mA at VCC＝0V
required required)
6 OVP detection at ZCD External latch function External latch function External latch function: Latched in 57us after pull-up
pin Latched in 48us after pull-up Latched in 48us after pull-up + Latch is detected in 2.3us after turnoff
7 Additional IS pin short N/A N/A 2.0V
protection function
8 VCC pin UVLO level 9.85V/9.1V 10.2V/9.0V 18V/8V
9 Internal soft start 1ms (only at startup) 1ms (only at startup) 2.6ms (only at startup)
10 OVP detection at VCC 28V 28V N/A
pin

Information in this catalog is subject to change without notice. 2009-4

You might also like