Castrol MHP Range 153 - 154

MHP Range
Diesel engine lubricants
Description
MHP 153 and 154 are high performance lubricants specifically developed for use in modern highly rated marine and
power generation four-stroke engines operating on distillate fuels.
Application
MHP is suitable for use in medium to highly-rated marine trunk piston engines operating with with ISO 8217 type DMA/
DMZ/DMB/RMA10 fuels and require API CF performance.
MHP has high load carrying capabilities and superior gear performance that enables it to be used as a common oil for
both engine and transmission systems.
Approval Status
MHP exceeds the specifications of API CF and is fully approved by major marine engine makers worldwide.
Features and Benefits

MHP is designed to offer enhanced detergency, excellent thermal and oxidative stability and enhanced performance at
high temperatures. This product also exhibits high load carrying capabilities and superior gear performance that enables
it to be used as a common oil for both engine and transmission systems.
The superior performance of MHP leads to reduced cost of use through:

Cleaner piston ring belts.
Excellent engine cleanliness.
Reduced maintenance and wear.
Improved resistance to liner lacquering.
Extended time between overhauls.
Technical Data
Name Method Units MHP 153 MHP 154
SAE Grade 30 40
Density @ 15°C ASTM D1298 g/ml 0.890 0.895
Viscosity, Kinematic @ 100°C ASTM D445 mm²/s 11.5 13.5
Total Base Number, TBN ASTM D2896 mg KOH/g 15.0 15.0
Closed Flash Point ASTM D93 °C 215 225
Pour Point ASTM D5985 °C -15 -15
FZG Gear Test, A8, 3/90 DIN 51 354 FLS 12 12
The above figures are typical of those obtained with normal production tolerance and do not constitute a specification.
Page 1 of 2
General Advice
Further information on all Castrol Offshore lubricants is availible from the addresses below.
Care and Handling

Avoid prolonged or repeated contact with skin. Wash thoroughly after handling.
Packaging and Storage

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to
avoid the possible ingress of water and the obliteration of drum markings. Products should not be stored above 600C,
exposed to hot sun or freezing conditions.
MHP Range
07 Sep 2012
Castrol, the Castrol logo and related marks are trademarks of Castrol Limited, used under licence.
This data sheet and the information it contains is believed to be accurate as of the date of printing. However, no warranty or representation, express or implied, is
made as to its accuracy or completeness. Data provided is based on standard tests under laboratory conditions and is given as a guide only. Users are advised
to ensure that they refer to the latest version of this data sheet. It is the responsibility of the user to evaluate and use products safely, to assess suitability for the
intended application and to comply with all applicable laws and regulations. Material Safety Data Sheets are available for all our products and should be
consulted for appropriate information regarding storage, safe handling, and disposal of the product. No responsibility is taken by either BP plc or its subsidiaries
for any damage or injury resulting from abnormal use of the material, from any failure to adhere to recommendations, or from hazards inherent in the nature of the
material. All products, services and information supplied are provided under our standard conditions of sale. You should consult our local representative if you
require any further information.
Australia Level 8 (QV1 Building), 250 St. Georges Terrace, Perth WA 6000, Australia. Customer Service Number +61 (0)8 9420 1854
Dubai City Tower 2, 6th Floor PO BOX 1699, Sheikh Zayed Road, Dubai, U.A.E. Customer Service Number +971 4 3079304
Norway Drammensveien 167, Box 153 Skoyen, 0212 Oslo, Norway. Customer Service Number +47 22 51 12 43
Singapore Keppel Bay Towers, 1 Harbourfront Avenue 02-01, Singapore 098632, Singapore. Customer Service Number +65 6371 8478
United Kingdom BlueSky Business Space, Westpoint House, Pavilion 2 Prospect Park, Prospect Road, Arnhall Business Park, Westhill. AB32 6FJ, UK.
Customer Service Number +44 (0)1224 766900
USA 501 Westlake Park Boulevard, Houston, Texas 77079, USA. Customer Service Number +1 800 339-7157
www.castrol.com/offshore
Page 2 of 2

Castrol MHP Range 153 - 154

Uploaded by

Copyright:

Available Formats

Castrol MHP Range 153 - 154

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Castrol MHP Range 153 - 154

Uploaded by

Copyright:

Available Formats

MHP Range

Diesel engine lubricants

Features and Benefits

The superior performance of MHP leads to reduced cost of use through:

Density @ 15°C ASTM D1298 g/ml 0.890 0.895

Viscosity, Kinematic @ 100°C ASTM D445 mm²/s 11.5 13.5

Total Base Number, TBN ASTM D2896 mg KOH/g 15.0 15.0

Closed Flash Point ASTM D93 °C 215 225

Pour Point ASTM D5985 °C -15 -15

FZG Gear Test, A8, 3/90 DIN 51 354 FLS 12 12

Care and Handling

Packaging and Storage

You might also like