Scribd
Upload
2K views4 pages

SIMATIC S7 S7-1200 SM 1231 Analog Input Module Specifications

The SM 1231 analog input module has variants with 4 or 8 input channels that can read voltage or current signals. It connects to S7-1200 programmable controllers. Key specifications include measuring ranges of ±10V, resolution of 12-16 bits, accuracy of 0.1-0.3% and isolation of 500VAC between channels and power. The module supports diagnostics for over/underflow and lost 24V power.

Uploaded by

Marcio G
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views4 pages

SIMATIC S7 S7-1200 SM 1231 Analog Input Module Specifications

The SM 1231 analog input module has variants with 4 or 8 input channels that can read voltage or current signals. It connects to S7-1200 programmable controllers. Key specifications include measuring ranges of ±10V, resolution of 12-16 bits, accuracy of 0.1-0.3% and isolation of 500VAC between channels and power. The module supports diagnostics for over/underflow and lost 24V power.

Uploaded by

Marcio G
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

SIMATIC S7 S7-1200 Programmable controller

SM 1231 analog input module specifications

SM 1231 analog input module specifications

Table 1 General specifications


Model SM 1231 AI 4 x 13 bit SM 1231 AI 8 x 13 bit SM 1231 AI 4 x 16 bit

Order number 6ES7 231-4HD32-0XB0 6ES7 231-4HF32-0XB0 6ES7 231-5ND30-0XB0

Dimensions W x H x D (mm) 45 x 100 x 75 45 x 100 x 75 45 x 100 x 75

Weight 180 grams 180 grams 180 grams

Power dissipation 2.2 W 2.3 W 2.0 W

Current consumption (SM Bus) 80 mA 90 mA 80 mA

Current consumption (24 VDC) 45 mA 45 mA 65 mA

Table 2 Analog inputs


Model SM 1231 AI 4 x 13 bit SM 1231 AI 8 x 13 bit SM 1231 AI 4 x 16 bit

Number of inputs 4 8 4

Type Voltage or current (differential): Selectable in groups of 2 Voltage or current


(differential)

Range ±10 V, ±5 V, ±2.5 V, 0 to 20 mA, or 4 mA to 20 mA ±10 V, ±5 V, ±2.5 V, ±1.25 V,


0 to 20 mA or 4 mA to 20 mA

Full scale range (data word) -27648 to 27648 voltage / 0 to 27648 current

Overshoot/undershoot range Voltage: 32511 to 27649 / -27649 to -32,512


(data word) Current: 32511 to 27649 / 0 to -4864
Refer to the section on analog input
ranges for voltage and current.

Overflow/underflow (data word) Voltage: 32767 to 32512 / -32513 to -32768


Refer to the section on input ranges for Current 0 to 20 mA: 32767 to 32512 / -4865 to -32768
voltage and current . Current 4 to 20 mA: 32767 to 32512 (values below -4864 indicate open wire)

Resolution1 12 bits + sign bit 15 bits + sign bit

Maximum withstand voltage/current ±35 V / ±40 mA

Smoothing None, weak, medium, or strong


Refer to the section on step response times.

Noise rejection 400, 60, 50, or 10 Hz


Refer to the section on sample rates.

Input impedance ≥ 9 MΩ (voltage) / 280 Ω (current) ≥ 1 MΩ (voltage) /


<315 Ω, >280 Ω (current)

Isolation None
Field side to logic 500 VAC
Logic to 24 VDC 500 VAC
Field side to 24 VDC 500 VAC
Channel to channel None

This document constitutes a free excerpt compiled by the user himself/herself from the documentation provided by Siemens for this product. Siemens disclaims all liability for the
completeness of this document. It shall only be used for the user's own internal purposes. It shall not be passed on to third parties.
11/30/2021

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/


SIMATIC S7 S7-1200 Programmable controller
SM 1231 analog input module specifications

Model SM 1231 AI 4 x 13 bit SM 1231 AI 8 x 13 bit SM 1231 AI 4 x 16 bit

Accuracy (25 °C / -20 to 60 °C) ±0.1% / ±0.2% of full scale ±0.1% / ±0.3% of full scale

Measuring principle Actual value conversion

Common mode rejection 40 dB, DC to 60 Hz

Operational signal range1 Signal plus common mode voltage must be less than +12 V and greater than -12 V

Cable length (meters) 100 m, twisted and shielded


1 Voltages outside the operational range applied to one channel may cause interference on other channels.

Table 3 Diagnostics
Model SM 1231 AI 4 x 13 bit SM 1231 AI 8 x 13 bit SM 1231 AI 4 x 16 bit

Overflow/underflow Yes Yes Yes

24 VDC low voltage Yes Yes Yes

Open wire 4 to 20 mA range only (if input is below -4164; 1.185 mA)

Table 4 Wiring diagrams for the analog input SMs


SM 1231 AI 4 x 13 bit (6ES7 231-4HD32-0XB0) SM 1231 AI 8 x 13 bit (6ES7 231-4HF32-0XB0)

Note: Connectors must be gold. See Appendix C, Spare Parts for order number.

This document constitutes a free excerpt compiled by the user himself/herself from the documentation provided by Siemens for this product. Siemens disclaims all liability for the
completeness of this document. It shall only be used for the user's own internal purposes. It shall not be passed on to third parties.
11/30/2021

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/


SIMATIC S7 S7-1200 Programmable controller
SM 1231 analog input module specifications

Table 5 Connector pin locations for SM 1231 AI 4 x 13 bit (6ES7 231-4HD32-0XB0)


Pin X10 (gold) X11 (gold)

1 L+ / 24 VDC No connection

2 M / 24 VDC No connection

3 GND No connection

4 AI 0+ AI 2+

5 AI 0- AI 2-

6 AI 1+ AI 3+

7 AI 1- AI 3-

Table 6 Connector pin locations for SM 1231 AI 8 x 13 bit (6ES7 231-4HF32-0XB0)


Pin X10 (gold) X11 (gold) X12 (gold) X13 (gold)

1 L+ / 24 VDC No connection No connection No connection

2 M / 24 VDC No connection No connection No connection

3 GND No connection No connection No connection

4 AI 0+ AI 2+ AI 4+ AI 6+

5 AI 0- AI 2- AI 4- AI 6-

6 AI 1+ AI 3+ AI 5+ AI 7+

7 AI 1- AI 3- AI 5- AI 7-

Table 7 Wiring diagram for the analog input SM


SM 1231 AI 4 x 16 bit (6ES7 231-5ND30-0XB0)

This document constitutes a free excerpt compiled by the user himself/herself from the documentation provided by Siemens for this product. Siemens disclaims all liability for the
completeness of this document. It shall only be used for the user's own internal purposes. It shall not be passed on to third parties.
11/30/2021

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/


SIMATIC S7 S7-1200 Programmable controller
SM 1231 analog input module specifications

SM 1231 AI 4 x 16 bit (6ES7 231-5ND30-0XB0)

Note: Connectors must be gold. See Appendix C, Spare Parts for order number.

Table 8 Connector pin locations for SM 1231 AI 4 x 16 bit (6ES7 231-5ND30-0XB0)


Pin X10 (gold) X11 (gold)

1 L+ / 24 VDC No connection

2 M / 24 VDC No connection

3 GND No connection

4 AI 0+ AI 2+

5 AI 0- AI 2-

6 AI 1+ AI 3+

7 AI 1- AI 3-

Note
Unused voltage input channels should be shorted.
Unused curent input channels should be set to the 0 to 20 mA range and/or disable broken wire error
reporting.
Inputs configured for current mode will not conduct loop current unless the module is powered and
configured.
Current input channels will not operate unless external power is supplied to the transmitter.

See also
→ Step response of the analog inputs
→ Measurement ranges of the analog inputs for voltage and current (SB and SM)

This document constitutes a free excerpt compiled by the user himself/herself from the documentation provided by Siemens for this product. Siemens disclaims all liability for the
completeness of this document. It shall only be used for the user's own internal purposes. It shall not be passed on to third parties.
11/30/2021

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

You might also like