Specification sheet

Diesel
generator set
QSX15 series
engine
364 kVA–550 kVA 50 Hz
409 kW–500 kW 60 Hz

Description
This Cummins® Power Generation Cooling system – Standard integral set-
commercial generator set is a fully integrated mounted radiator system, designed and tested
power generation system, providing optimum for rated ambient temperatures, simplifies facility
performance, reliability, and versatility for design requirements for rejected heat.
stationary standby and prime power.
Control system – The PowerCommand®
electronic control is standard equipment and
Features provides total genset system integration,
Cummins® heavy-duty engine – Rugged including auto remote start/stop, precise
4-cycle industrial diesel delivers reliable frequency and voltage regulation, alarm and
power, low emissions and fast response to status message display, AmpSentry protection
load changes. and output metering.

Optional permanet magnet generator Enclosures – Optional weather-protective and

(PMG) – Offers enhanced motor starting and sound attenuated enclosures.
fault clearing short circuit capability.
Warranty – Backed by a comprehensive
Alternator – Low reactance 2/3 pitch warranty and Worldwide distributor network.
windings; low waveform distortion with
non-linear loads, fault clearing short-circuits
capability, and class H insulation.

Standby rating Prime rating Emissions compliance

50 Hz 60 Hz 50 Hz 60 Hz TA Luft/EU stage Controller
Model kVA (kW) kW (kVA) kVA (kW) kW (kVA) EPA Tier Std/Opt Data sheet
C400 D5e 400 (320) 364 (291) 4g/Former EU Stage II 2.2/3/3 DS346-CPGK
C450 D5e 450 (360) 409 (327) 4g/Former EU Stage II 2.2/3/3 DS347-CPGK
C500 D5e 500 (400) 455 (364) 4g/Former EU Stage II 2.2/3/3 DS348-CPGK
C550 D5e 550 (440) 500 (400) 4g/Former EU Stage II 2.2/3/3 DS349-CPGK
C450 D6e 450 (562) 409 (511) EPA Tier 2 2.2/3/3 DS350-CPGK
C500 D6e 500 (625) 455 (568) EPA Tier 2 2.2/3/3 DS351-CPGK

Our energy working for you. TM

cumminspower.com
© 2012 Cummins Power Generation Inc. | SS11-CPGK-RevB (05/12)
Generator set specifications
Governor regulation class ISO 8528 G3
Voltage regulation, no load to full load +/- 1%
Random voltage variation +/- 1%
Frequency regulation Isochronous
Random frequency variation +/- 0.25%
Radio frequency emissions compliance BS EN 61000-6-2:2005/BS EN 61000-6-3:2007

Engine specifications
Design 4 cycle, in-line, turbo charged, charge air cooled
Bore 137 mm (5.39 in.)
Stroke 169 mm (6.65 in.)
Displacement 15 liter (912 in3)
Cylinder block Cast iron, 6 cylinder
Battery capacity 100 AH
Battery charging alternator 35 amps
Starting voltage 24 volt, negative ground
Fuel system Direct injection
Fuel filter Spin on fuel filters with water separator
Air cleaner type Dry replaceable element with restriction indicator
Lube oil filter type(s) Spin on full flow filter
Standard cooling system 122 °F (50 °C) ambient radiator

Alternator specifications
Design Brushless, single bearing, revolving field
Stator 2/3 pitch
Rotor Single bearing, flexible disc
Insulation system Class H
Standard temperature rise Standby 125-163 °C
Exciter type Self excited (PMG optional)
Phase rotation A (U), B (V), C (W)
Alternator cooling Direct drive centrifugal blower fan
AC waveform total harmonic distortion (THDV) No load < 1.5%. Non distorting balanced linear load < 5%
Telephone influence factor (TIF) < 50 per NEMA MG1
Telephone harmonic factor (THF) < 2%

Available voltages
50 Hz Line–Neutral/Line–Line 60 Hz Line–Neutral/Line–Line
• 110/190 • 220/380 • 110/190 • 220/380
• 115/200 • 230/400 • 115/200 • 230/400
• 120/208 • 240/416 • 120/208 • 240/416
• 127/220 • 255/440 • 127/220 • 255/440
• 139/240 • 277/480

Generator set options and accessories

Engine Circuit breaker Control panel 2 years for prime
Heavy duty air cleaner 3 or 4 pole main circuit PowerCommand 3.3 application
Water jacket heater 240 V breaker AC output bargraph Silencer
Motorised 3 or 4 pole circuit Shutdown audible alarm 9 dB attenation critical
Enclosure breaker
Exhaust gas temp guage silencer
Sound attenuated canopy Aux contacts and trip alarm
Earth fault shutdown 25 dB attenuation
Alternator Shunt trip – 24 VDC residential silencer
Control cabinet heater
Alternator heater Fuel tank Battery charger
Exciter voltage regulator Warranty
Low fuel level warning or Set mounted
(PMG) shutdown 10 years for major
components Standalone
High alternator temp High fuel level warning
shutdown 5 years for standby 5 A or 10 A
Electric fuel transfer pump application
Note: Some options may not be available on all models - consult factory for availability.

Our energy working for you. TM

cumminspower.com
© 2012 Cummins Power Generation Inc. | SS11-CPGK-RevB (05/12)
PowerCommand 2.2 control system Digital voltage regulation
• Integrated digital electronic voltage regulator.
The PowerCommand control • 3-phase, 4-wire line-to-line sensing.
system is an integrated
• Configurable torque matching.
microprocessor based generator
set control system providing AmpSentry AC protection
voltage regulation, engine • AmpSentry protective relay.
protection, alternator protection, • Over current and short circuit shutdown.
operator interface and
• Over current warning.
isochronous governing. Refer
to document S-1568 for more • Single and three phase fault regulation.
detailed information on the control. • Over and under voltage shutdown.
• Over and under frequency shutdown.
Major features • Overload warning with alarm contact.
• AmpSentry – Includes integral AmpSentry protection, • Reverse power and reverse var shutdown.
which provides a full range of alternator protection • Field overload.
functions that are matched to the alternator provided.
• Power management – Control function provides battery Engine protection
monitoring and testing features and smart starting control • Battery voltage monitoring, protection and testing.
system. • Overspeed shutdown.
• Advanced control methodology – Three phase sensing, • Low oil pressure warning and shutdown.
full wave rectified voltage regulation, with a PWM output • High/low coolant temperature warning or shutdown.
for stable operation with all load types. • Low coolant level warning or shutdown.
• Communications interface – Control comes standard with • Fail to start (overcrank) shutdown.
PCCNet and Modbus interface.
• Fail to crank shutdown.
• Regulation compliant – Prototype tested: CE, UL, and
• Cranking lockout.
CSA compliant.
• Sensor failure indication.
• Service – InPower™ PC-based service tool available
for detailed diagnostics, setup, data logging and fault • Low fuel level warning or shutdown (optional).
simulation. • Fuel-in-rupture-basin warning or shutdown (optional).
• Easily upgradeable – PowerCommand controls are • Full authority electronic engine protection.
designed with common control interfaces. Control functions
• Reliable design – The control system is designed for • Time delay start and cool down.
reliable operation in harsh environment.
• Real time clock for fault and event time stamping.
• Multi-language support.
• Exerciser clock and time of day start/stop.
Operator panel features • Data logging.
• 128 x 128 pixels graphic LED backlight LCD. • Cycle cranking.
• Auto, manual, start, stop, fault reset and lamp test/panel • Load shed.
lamp switches. • Configurable inputs and outputs (4).
• Alpha-numeric display with pushbuttons. • Remote emergency stop.
• LED lamps indicating genset running, remote start, not in
PowerCommand 3.3 control system
auto, common shutdown, common warning, manual run
mode, auto mode and stop mode. The PowerCommand 3.3
has the following additional
Alternator data features and benefits over the
• Line-to-neutral and line-to-line AC volts. PowerCommand 2.3. Refer
• 3-phase AC current. to document S-1570 for more
• Frequency. detailed information on the
• kW, kvar, power factor kVA (three phase and total). control.

Engine data Operator panel features

• DC voltage. • 320 x 240 pixels graphic LED backlight LCD.
• Engine speed. • In addition to the 2.2 functions, the operator panel
displays paralleling breaker status and provides for direct
• Lube oil pressure and temperature.
control of the paralleling breaker.
• Coolant temperature.
• Comprehensive FAE data (where applicable). Paralleling control functions
• First Start Sensor System selects first genset to close to
Other data bus.
• Genset model data. • Phase Lock Loop Synchronizer with voltage matching.
• Start attempts, starts, running hours, kW hours. • Sync check relay.
• Load profile (operating hours at % load in 5% • Isochronous kW and kVar load sharing.
increments).
• Load govern control for utility paralleling.
• Fault history.
• Extended Paralleling (baseload/peak shave) Mode.
• Data logging and fault simulation (requires InPower).
• Digital power transfer control, for use with a breaker pair
Standard control functions to provide open transition, closed transition, ramping
closed transition, peaking and base load functions.
Digital governing
• Integrated digital electronic isochronous governor.
• Temperature dynamic governing.

Our energy working for you. TM

cumminspower.com
© 2012 Cummins Power Generation Inc. | SS11-CPGK-RevB (05/12)
Ratings definitions OPEN

Emergency standby power (ESP):

Applicable for supplying power to varying electrical

C
load for the duration of power interruption of a reliable
utility source. Emergency standby power (ESP) is
in accordance with ISO 8528. Fuel stop power in
accordance with ISO 3046, AS 2789, DIN 6271 and
BS 5514. A B

Limited-time running power (LTP):

ENCLOSED
Applicable for supplying power to a constant electrical
load for limited hours. Limited time running power
(LTP) is in accordance with ISO 8528.

C
Prime power (PRP):
Applicable for supplying power to varying electrical
load for unlimited hours. Prime power (PRP) is in
A B
accordance with ISO 8528. Ten percent overload
capability is available in accordance with ISO 3046,
AS 2789, DIN 6271 and BS 5514. This outline drawing is to provide representative configuration
details for Model series only.
Base load (continuous) power (COP):
See respective model data sheet for specific model outline
Applicable for supplying power continuously to
drawing number.
a constant electrical load for unlimited hours.
Continuous power (COP) in accordance with
ISO 8528, ISO 3046, AS 2789, DIN 6271 and BS 5514. Do not use for installation design

Weight and dimensions

Open Enclosed
A B C Dry wt.* Wet wt.* A B C Dry wt.* Wet wt.*
Model mm mm mm (kg) (kg) mm mm mm (kg) (kg)
C400 D5e 3427 1500 2066 3744 3878 5106 1553 2447 5049 5183
C450 D5e 3427 1500 2066 3987 4121 5106 1553 2447 5292 5426
C500 D5e 3427 1500 2066 3987 4121 5106 1553 2447 5292 5426
C550 D5e 3427 1500 2066 4137 4271 5106 1553 2447 5442 5576
C450 D6e 3427 1500 2066 3987 4121 5106 1553 2447 5292 5426
C500 D6e 3427 1500 2066 4137 4271 5106 1553 2447 5442 5576
*Note: Weights represent a set with standard features. See outline drawings for weights of other configurations.

Certifications
This generator set is designed in facilities
This generator set is available with
certified to ISO 9001 and manufactured in
CE certification.
facilities certified to ISO 9001 or ISO 9002.

This generator set conforms to former EU This generator set has been
Emissions
compliance
Stage II emission levels (50 Hz) and EPA ISO 8528 designed to comply with
Tier 2 (60 Hz) emissions regulations. ISO 8528 regulation.

Cummins Power Generation

Americas Asia Pacific Europe, CIS, Middle East and Africa

1400 73rd Avenue N.E. 10 Toh Guan Road #07-01 Manston Park Columbus Ave
Minneapolis, MN 55432 USA TT International Tradepark Manston Ramsgate
Phone 763 574 5000 Singapore 608838 Kent CT12 5BF United Kingdom
Fax 763 574 5298 Phone 65 6417 2388 Phone 44 1843 255000
Fax 65 6417 2399 Fax 44 1843 255902

Our energy working for you. TM

© 2012 Cummins Power Generation Inc. All rights reserved.

Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand, AmpSentry, InPower
and “Our energy working for you.” are trademarks of Cummins Power Generation. Other company, product, or service names
may be trademarks or service marks of others. Specifications are subject to change without notice. cumminspower.com
SS11-CPGK-RevB (05/12)