Onhand Quantity Conversion in Oracle apps-R12

Onhand Quantity Conversion in Oracle apps-R12

    In this Article,you will be knowing,
    * What are the base tables?
    * What are the interface tables?
    * What are the mandatory validations
    * How to validate from given data?
    * How to insert records into interface tables?
    * How we move interface records into corresponding base tables.

Onhand Quantity Conversion:

base tables:
mtl_onhand_quantities
mtl_lot_numbers
mtl_serial_numbers

interface tables:
mtl_transactions_interface
mtl_transaction_lots_interface
mtl_serial_numbers_interface

note:
our stage table should have all the required mandatory columns and also should have who
columns,and error_code,error_message to know whter that record is valid or not
.so that we can uptade our stage table if it is valid it is 'V',if it is invalid,it is 'E'.

ALL THE ABOVE CAN BE CLARIFIED BELOW;

stage table columns:

       ORGANIZATION_CODE              
      ,ITEM_NUMBER
      ,SUBINVENTORY
      ,LOCATOR_SEGMENTS
      ,SERIAL_NUMBER
      ,LOT_NUMBER
      ,TRANSACTION_DATE
      ,TRANSACTION_TYPE
      ,UOM_CODE
      ,QUANTITY
      ,DIST_ACCOUNT
      ,ERROR_CODE
      ,EXPIRATION_DATE
      ,SUB_DESCRIPTION
      ,LOC_DESCRIPTION
      ,INVENTORY_LOCATION_TYPE_11I
      ,INV_LOC_TYPE_R12
      ,LICENSE_PLATE_NUMBER
      ,LPN_CONTEXT
      ,LOC_STATUS_ID_11I
      ,LOC_STATUS_11I
      ,ONHAND_STATUS_R12
      ,FF_PICK_STATUS
      ,FF_ACTIVE_DATE
      ,FF_CLOSED_DATE
      ,CREATED_BY
      ,CREATION_DATE
      ,LAST_UPDATE_DATE
      ,LAST_UPDATED_BY 
      ,LAST_UPDATE_LOGIN
     
Validations:

1)organization code validation(check organization code exist or not AND IF exist derive
ORGANIZATION_ID,if it goes to exception update error_code='not valid')
i.e
SELECT  mp.organization_id,
        'V'
INTO    x_organization_id,
        error_code
FROM    mtl_parameters  mp
WHERE   mp.organization_code = cursor.organization_code;
exception
update stg_table set error_code='E';

2)Item name(number) Validation(check item is valid for perticular organization or not) i.e
SELECT  msi.inventory_item_id
,       msi.primary_uom_code
,       msi.lot_control_code
,       msi.serial_number_control_code
,      'V'
,       msi.MTL_TRANSACTIONS_ENABLED_FLAG
INTO    x_inv_item_id
,       x_primary_uom_code
,       x_lot_control_code
,       x_serial_number_control_code
,       error_code
,       v_txn
FROM    mtl_system_items        msi
WHERE   msi.organization_id     =   cursor.organization_code
AND     msi.segment1            =   cursor.item_number;
exception
update stg_table set error_code='E';

3)Sub Inventory Code validation(check secondary_inventory_name is exist for organization

or not)
i.e
SELECT msi.secondary_inventory_name,
      'V'
INTO   v_subinventory,
       error_code
FROM   mtl_secondary_inventories msi
WHERE  msi.organization_id = p_organization_id--(get from org_code)
AND    msi.secondary_inventory_name  = cursor.SUBINVENTORY;
exception
update stg_table set error_code='E';

4)Locator  Validation(validate locator segment AND get inventory location id) i.e
SELECT  mil.inventory_location_id
,       'V'
INTO    x_locator_id
,       error_code
FROM    mtl_item_locations_kfv  mil
WHERE   mil.organization_id      =   p_organization_id--(get from org_code)
AND     mil.subinventory_code    =   cursor.SUBINVENTORY;
AND     mil.concatenated_segments=   cursor.LOCATOR_SEGMENTS
AND     mil.enabled_flag         =   'Y'
AND     NVL(mil.start_date_active,  SYSDATE) <= SYSDATE
AND     NVL(mil.END_date_active,    SYSDATE) >= SYSDATE;
exception
update stg_table set error_code='E';

5)Transaction Type Validation(with Transaction Type get Transaction Type Id) i.e
SELECT  mtt.transaction_type_id
,       mtt.transaction_source_type_id
,       'V'
INTO    x_transaction_type_id
,       x_txn_source_type_id
,       error_code
FROM    mtl_transaction_types   mtt
WHERE   UPPER ( mtt.transaction_type_name ) = UPPER (cursor.TRANSACTION_TYPE )
AND     nvl ( mtt.disable_date, sysdate +1 ) > SYSDATE ;
exception
update stg_table set error_code='E';

6)if they dont give any distribution id then,we need to create miscellenous receipt from front-
end,if they dont give us any code combination id,example,we wil be taking one hard coded
value i.e
l_const_misc_acc CONSTANT VARCHAR2(100) := '00-00-11222-111211-00000-00111'
value we get as soon as we create miscellenous receipt;
declare
v_expense_account   := null;
BEGIN

    select code_combination_id

    into v_expense_account
      from gl_code_combinations_kfv gcc
     where concatenated_segments =l_const_misc_acc;

EXCEPTION
WHEN OTHERS
THEN
   update stg_table set error_code='E'
END;
--WITH ABOVE ALL VALIDATIONS WE CAN UPDATE BOTH VALID RECORD AND
INVALID RECORDS IN OUR STAGE TABLE ITSELF,AND WE CAN PROCESS ONLY
VALID RECORD TO INTERFACE TABLE BY SELETING STAGE TABLE WHERE
ERROR_CODE='V'
---------------------------------------------------
---BELOW IS CODE TO INSERT INTO INTERFACE TABLES---
---------------------------------------------------
Procedure PROC_INSERT_INTO_INTERFACE
 is
  v_transaction_interface_id Number;
  v_serial_transaction_temp_id Number;
  v_message   VARCHAR2(2000):=null;
  v_Isuccess  Number:=0;
  v_Ierror Number:=0;
  v_Itotal Number:=0;
  v_return_status  VARCHAR2(1):=null;
  v_flag   Number:=0;
  v_sflag Number:=0;
  v_lflag Number:=0;
  v_reason_id Number:=null;
  v_inventory_item_id Number:=NULL;
  v_organization_id Number:=NULL;
  v_primary_uom_code VARCHAR2(30):=NULL;
  v_lot_control_code VARCHAR2(90):=NULL;
  v_serial_number_control_code VARCHAR2(90):=NULL;
  v_Distribution_Account number:=0;
  v_inventory_location_id number:=0;
  v_project_id number:=null;
  v_task_id number:=null;
  --
  l_return_status           VARCHAR2(1000);
  l_msg_count               NUMBER;
  l_msg_data                VARCHAR2(1000);
  l_lpn_id                  NUMBER;
  --
cursor C is
SELECT
ROWID AS row_id
,stg_table.ORGANIZATION_CODE
,stg_table.ITEM_NUMBER
,stg_table.SUBINVENTORY
,stg_table.LOCATOR_SEGMENTS
,stg_table.SERIAL_NUMBER
,stg_table.LOT_NUMBER
,stg_table.TRANSACTION_DATE
,stg_table.TRANSACTION_TYPE
,stg_table.UOM_CODE
,stg_table.QUANTITY
,stg_table.DIST_ACCOUNT
,stg_table.PROCESS_FLAG
,stg_table.SUB_DESCRIPTION
,stg_table.LOC_SEGMENT1
,stg_table.LOC_SEGMENT2
,stg_table.LOC_SEGMENT3
,stg_table.LOC_DESCRIPTION
,stg_table.INVENTORY_LOCATION_TYPE_11I
,stg_table.INV_LOC_TYPE_R12
,stg_table.LICENSE_PLATE_NUMBER
,stg_table.LPN_CONTEXT
,stg_table.CREATED_BY
,stg_table.CREATION_DATE
,stg_table.LAST_UPDATED_BY
,stg_table.LAST_UPDATE_DATE
,stg_table.LAST_UPDATE_LOGIN
,stg_table.ERROR_MESSAGE
,stg_table.REQUEST_ID
,stg_table.EXPIRATION_DATE
,stg_table.FF_PICK_STATUS
,stg_table.FF_ACTIVE_DATE
,stg_table.FF_CLOSED_DATE
  ,mtt.transaction_type_id
  ,mtt.transaction_source_type_id
  FROM    XX_INV_ONHAND_QTY_STG stg_table,
   mtl_transaction_types mtt
  Where stg_table.Process_Flag      =  'V'
  And  Upper ( Mtt.Transaction_Type_Name ) = Upper ( Transaction_Type)
    AND     nvl ( mtt.disable_date, sysdate +1 ) > SYSDATE;

BEGIN
FOR I in C loop
v_inventory_item_id:=NULL;
    v_organization_id:=NULL;
    v_primary_uom_code:=NULL;
    v_lot_control_code:=NULL;
    v_serial_number_control_code:=NULL;
    v_Distribution_Account:=NULL;
    v_inventory_location_id:=null;
    v_project_id:=null;
    v_task_id:=null;

    BEGIN
    Select Organization_Id
    Into v_organization_id
    From
    org_organization_definitions ood
    Where
    ood.Organization_Code=I.Organization_Code;
    update stg_table set error_code='S';
    EXCEPTION
    WHEN OTHERS THEN
    update stg_table set error_code='US';
    END;
   
    BEGIN
    Select            
Msi.Inventory_Item_Id,msi.primary_uom_code,msi.lot_control_code,msi.serial_number_cont
rol_code
    Into
v_inventory_item_id,v_primary_uom_code,v_lot_control_code,v_serial_number_control_cod
e
    From
    Mtl_System_Items_B Msi
    Where
    msi.organization_id=v_organization_id
    and msi.segment1=I.item_number;
    update stg_table set error_code='S';
    EXCEPTION
    WHEN OTHERS THEN
    update stg_table set error_code='US';
    END;
   
    BEGIN
    Select  Mil.Inventory_Location_Id,Mil.Project_Id,Mil.Task_Id
    into    v_inventory_location_id,v_project_id,v_task_id
    From    Mtl_Item_Locations_Kfv  Mil
    Where   Mil.Organization_Id      =  V_Organization_Id
    And     Mil.Subinventory_Code    =  I.Subinventory
    AND     mil.concatenated_segments=  I.locator_segments
    AND     mil.enabled_flag         =   'Y'
    And     Nvl(Mil.Start_Date_Active,  Sysdate) <= Sysdate
    AND     NVL(mil.END_date_active,    SYSDATE) >= SYSDATE;
    update stg_table set error_code='S';
    EXCEPTION
    WHEN OTHERS THEN
    update stg_table set error_code='US';
    END;
   
   If I.license_plate_number is not null then 
    Begin
    select lpn_id
    into l_lpn_id
    from wms_license_plate_numbers wlpn
    where wlpn.LICENSE_PLATE_NUMBER = I.license_plate_number
    and    wlpn.organization_id =  v_organization_id
    and rownum =1
    and    nvl(wlpn.lot_number,0) =nvl(I.lot_number,0) ;
    Exception
    when others then
    l_lpn_id := NULL;
    end;
    If l_lpn_id is null then
     begin
      wms_container_pub.Create_LPN (
      p_api_version      =>1.0,
      x_return_status     =>l_return_status,
      x_msg_count         =>  l_msg_count ,        
      x_msg_data          =>  l_msg_data,
      p_lpn               =>  I.license_plate_number,
      p_organization_id   =>  v_organization_id,
      p_container_item_id  => NULL, --v_inventory_item_id,
      p_subinventory      =>  I.subinventory,
      p_locator_id        =>  v_inventory_location_id,
      p_serial_number     =>  null,
      p_lot_number        =>  I.lot_number,
      x_lpn_id            => l_lpn_id) ;
      commit;
      EXCEPTION
       WHEN OTHERS THEN
       dbms_output.put_line('to create lpn number using API');
       l_lpn_id := null;
     end;
    end if;
   end if;

   SELECT  MTL_SYSTEM_ITEMS_INTF_SETS_S.NEXTVAL
    INTO    v_transaction_interface_id
    FROM    dual;
   
   SELECT  MTL_SYSTEM_ITEMS_INTF_SETS_S.NEXTVAL
    INTO    v_serial_transaction_temp_id
    FROM    dual;
    --inserting into interface tables from above derived values(i.e we got values to declared
variables)
   BEGIN
      INSERT INTO mtl_transactions_interface
              (   source_header_id
              ,   source_line_id
              ,   transaction_mode
              ,   source_code
              ,   process_flag
              ,   transaction_interface_id
              ,   transaction_date
              ,   inventory_item_id
              ,   transaction_uom
              ,   organization_id
              ,   subinventory_code
              ,   locator_id
              ,   transfer_lPN_ID
              ,   project_id
              ,   task_id
              ,   reason_id
              ,   transaction_quantity
              ,   transaction_type_id
              ,   transaction_source_type_id
              ,   distribution_account_id
              ,   created_by
              ,   creation_date
              ,   last_updated_by
              ,   last_update_date
              ,   last_update_login
              )
      VALUES
              (   10701
              ,   0
              ,   3
              ,   'On HAND Qty Load'
              ,   1
              ,   nvl(v_transaction_interface_id,10003918)
              ,   cv_process_rec.transaction_date
              ,   v_inventory_item_id
              ,   v_primary_uom_code
              ,   v_organization_id
              ,   cv_process_rec.subinventory
              ,   v_inventory_location_id
              ,   l_lpn_id
              ,   v_project_id
              ,   v_task_id
              ,   v_reason_id
              ,   cv_process_rec.quantity
              ,   cv_process_rec.transaction_type_id
              ,   cv_process_rec.transaction_source_type_id
              ,   cv_process_rec.dist_account
              ,   NVL(fnd_global.user_id,-1)
              ,   SYSDATE
              ,   NVL(fnd_global.user_id,-1)
              ,   SYSDATE
              ,   NVL(fnd_global.login_id,-1)
              );
        update stg_table set error_code='P';
     else
       DELETE
       FROM    mtl_transactions_interface
       WHERE   transaction_interface_id  = v_transaction_interface_id;

       DELETE
       FROM    mtl_transaction_lots_interface
       WHERE   transaction_interface_id  = v_transaction_interface_id;

       DELETE
       FROM    mtl_serial_numbers_interface
       WHERE   transaction_interface_id  = v_serial_transaction_temp_id;
      update stg_table set error_code='UP';
      END IF;
      EXCEPTION
      WHEN OTHERS THEN
       dbms_output.put_line('RECORDS Insertion into MTL_TRANSACTION_INTERFACE
failed');
      END;
     
      IF I.lot_number is not null THEN
      BEGIN
         INSERT INTO mtl_transaction_lots_interface
              (    transaction_interface_id
              ,    serial_transaction_temp_id
              ,    lot_number
              ,    transaction_quantity
              ,    created_by
              ,    creation_date
              ,    last_updated_by
              ,    last_update_date
              ,    last_update_login
              ,     primary_quantity
              ,    LOT_EXPIRATION_DATE
              ,    C_ATTRIBUTE1
              ,    D_ATTRIBUTE1
              ,    D_ATTRIBUTE2
              )
              VALUES
             (    v_transaction_interface_id
             ,    v_serial_transaction_temp_id
             ,    I.lot_number
             ,    I.quantity
             ,    NVL(fnd_global.user_id,-1)
             ,    SYSDATE
             ,    NVL(fnd_global.user_id,-1)
             ,    SYSDATE
             ,    NVL(fnd_global.login_id,-1)
             ,    I.quantity
             ,    I.EXPIRATION_DATE
             ,    I.FF_PICK_STATUS
             ,    I.FF_ACTIVE_DATE
             ,    I.FF_CLOSED_DATE
             );
         update stg_table set error_code='P';
         EXCEPTION
       WHEN OTHERS THEN
         dbms_output.put_line('RECORDS Insertion into MTL_LOT_NUMBERS_INTERFACE
failed');
         END;
         END IF;
       
         IF I.serial_number is not null THEN
      BEGIN
      INSERT INTO mtl_serial_numbers_interface
               (   transaction_interface_id
               ,   fm_serial_number
               ,   to_serial_number
               ,   created_by
               ,   creation_date
               ,   last_updated_by
               ,   last_update_date
               ,   last_update_login
               )
       VALUES
               (   DECODE ( v_lot_control_code, 2, v_serial_transaction_temp_id,
v_transaction_interface_id )
               ,   I.serial_number
                ,   I.serial_number
               ,   NVL(fnd_global.user_id,-1)
               ,   SYSDATE
               ,   NVL(fnd_global.user_id,-1)
               ,   SYSDATE
               ,   NVL(fnd_global.login_id,-1)
               );
        update stg_table set error_code='P';
         EXCEPTION
         WHEN OTHERS THEN
         dbms_output.put_line('RECORDS Insertion into
MTL_TRANSACTION_SERIAL_INTERFACE failed');
         END;
         END IF;
  
      END LOOP;
      EXCEPTION
      WHEN OTHERS THEN
        dbms_output.put_line('PROC_INSERT_INTO_INTERFACE FAILED TO INSERT');
    END PROC_INSERT_INTO_INTERFACE;

---------------------------------------------------
---BELOW TO INSERT DATA FROM INTERFACE TO BASE TABLES---
---------------------------------------------------   
Go to front-end,
inventory responsibility->SETUP->transactions->Interface Manager,now screen opens,in
that u will have tools,press tools and click launch manager,now it will start hitting base tables

note:
If error is occurring go to Transactions -> Open Transaction Interface -> Error -> See error
After correcting the error apply the below code
/* update mtl_transactions_interface
set process_flag = 1,
lock_flag = 2,
transaction_mode = 3,
validation_required = null,
error_code = null,
error_explanation = null
where process_flag in (1,3); */   
and run procedure,and once again launch manager

once it completed,please check corresponding base tables i.e

select *from mtl_onhand_quantities where trunc(creation_date)=trunc(sysdate);

select *from mtl_lot_numbers where trunc(creation_date)=trunc(sysdate);
select *from mtl_serial_numbers where trunc(creation_date)=trunc(sysdate);