PRODUCT

overVieW
submersible electric pumps
aeration and mixing systems
lifting stations
nanobox
Lifting stations
bluebox
Lifting stations
® ®

AN high quality polyethylene tank intended for collecting the ideal solution for collecting sewage and pumping it into the
New high performance series
water exclusively from domestic drains, including washing main sewer network. Versione a colori
machines, showers and sinks (not suited for WC’s). The tank has The BlueBOX range consists of rotary moulded polyethylene tanks
a 33 L maximum capacity and is supplied with a Zenit Steel series of 60, 90, 150 and 250 litres for installation with a single pump
The UNIQA® ® range represents the perfect solution for any civil,
submersible pump already installed. IT is very versatile and easy or 400 litres for installation with two pumps. The 60, 90 and 150L industrial or professional application, with a choice of 2-, 4-, 6- or
to install.
models are recommended for domestic systems and the 250 and 8- pole motors from
Versione 4 ditogrigi
in scala 200 kW, 50 and 60Hz, and outlets from
400L for civil and residential plants.
Dimensions (mm)...................410x360x310 DN80 to DN400.
®
Nr. of pumps..........................1
Operation temperature..........35°C Dimensions (mm)...................480x370x610
Pre-installed pump.................DR-Steel 25 / DR-Steel 37 Nr. of pumps..........................1 the vortex Versione
impeller that allowsVersione
in b/n
for wider
a colori Free passage, paired with
Versione al tratto
Operation temperature..........40°C the anti-clogging system, guarantees
® the optimum performance of
Including: DR-Steel pump, 10m standard cable, float switch. Recommended pumps............DG Blue Versione a colori every UNIQA® model in any application.
Delivery port: DN32 (male thread). Including: cable gland, PVC delivery pipe Ø 1½”, emergency Versione in scala di grigi
nanobox Inlet: nr. 1 x DN30, nr. 1 x DN40. draining connector, gasket kit for inlet pipes 2xØ110, 1xØ75
UNIQA® motors correspond to ® IE3 efficiency class and match S1
33l bluebox and 1xØ50 mm, nr.1 special support ® to reduce the float
switch level, use and maintenance booklet. Overflow alarm duty cycle standards for submerged operation at a temperature of
90l level optional. 60° C, as per NEMA A. A productVersione
built intob/nlast. In civil and industrial
Versione al tratto

applications UNIQA® is a synonym for smooth operation, steady

performance and continuous work cycles without undesired

ams
Dimensions (mm)...................580x480x660
Nr. of pumps..........................1 Versione in scala di grigi
system shutdowns.
Operation temperature..........40°C
Recomanded pumps..............DGBlue, DGBluePRO,
..............................................GRBluePRO IT is made of innovative materials and is equipped with cutting-edge
Aeration and mixing systems ®
Including: cable gland, PVC delivery pipe Ø 1½”, emergency
technical features such as the new patented cooling system.
draining connector, gasket kit for inlet pipes 2xØ110, 1xØ75
bluebox and 1xØ50 mm, nr.1 special support to reduce the float switch
intended for the treatment of civil and industrial wastewater. 150l level, use and maintenance booklet.
9" and 12" disc-shaped and 2" tubular air diffusers with elastomer Overflow alarm level optional
membranes providing high oxygen transfer; Versione in b/n Versione al tratto new produc
Venturi-type submerged aerators for a combined mixing and aeration
Dimensions (mm)...................900x500x660 ts
action, suitable for homogenization tanks and storing water from the
first rainfall;
Nr. of pumps..........................1 2012
Operation temperature..........40°C
mixers and flow-makers with self-cleaning propellers from 285 mm to Recomanded pumps..............DGBlue, DGBluePRO,
2100 mm in diameter with a rotation speed from 1000 to 27 rpm. ..............................................GRBluePRO

Including: cable gland, nr. 2 gaskets pipe Ø110, nr. 1

Micro-perforated elastomer membrane for bluebox gasket pipe Ø75 mm.
continual/intermittent aeration and in high-efficiency
permanent systems. Wastewater treatment and
250l New range of lifting stations
purification (for the activation of biological oxidation and
nitrification process), pre-aeration and aeration processes Pumping stations in medium-density 1 2
in oxidation tanks and aerobic digestion plants for civil Dimensions (mm)...................900x1000x660
and industrial sludges. Nr. of pumps..........................2 sturdy polyethylene, suitable for
Operation temperature..........40°C
oxyplate Recomanded pumps..............DGBlue, DGBluePRO,
installations in small to large
9”-12” ..............................................GRBluePRO, DGO residential districts.

Including: cable gland, nr. 4 gaskets pipe Ø110, nr. 2 • The lifting station is provided with
bluebox gasket pipe Ø75 mm. a walk-over and a drive-over metal 3
1 civil
Recommended for the construction of removable aeration
systems and where a large output surface area is required 400l cover; 2 residential
with only a small number of air distribution pipelines. • The tank is designed to resist the 3 industrial
They consist of a head with threaded connection, ground- and water-pressure;
rigid polypropylene support and tubular membrane in
elastomer with tiny holes, secured with stainless steel • Smooth internal walls ease the
band clamps.   emptying process and prevent
oxytube PRS, PRX and PRO series mixers are built in cast iron
unpleasant smells and the
or stainless steel, propellers with self-cleaning design and
diameter up to 850 mm. The electric motors are rated from proliferation of bacteria.
1.1 to 15 kW and have 4, 6 or 8 poles; transmission may be
Aerators: the “Venturi” principle oxy, system oxy and direct or by means of a planetary reduction gear. The BOX PRO pumping stations can be used with one or two electrical
jetoxy provide a combined mixing and aeration action. Use: mixing processes where large quantities of liquid
Coupled to electric pumps up to 30 kW and channel-type submersible pumps with vortex, channel or grinder impeller.
have to be kept in motion to prevent sedimentation.
hydraulic units with large free passage combined with mixers
“oxy” series ejector devices. The pumps might be equipped with a level coupling device fixed to the
Context of use: civil and industrial, wastewater treatment bottom which avoids emptying the tank in order to lift the pump back to
plants, sludge treatment or the oxygenation/pumping Built in cast iron with stainless steel propeller. Propellers the surface.
submerged of water, fish farms, small treatment tanks, holding, of self-cleaning design, up to 2100 mm in diameter.
aerators homogenisation and stabilisation pits and tanks, first
rainfall collection and oxidation tanks.
Electric motors from 0.8 to 5.5 kW with 4 or 6 poles, with
Every station is designed with 3 optional waste water inlet connections,
planetary reduction gear.
Use: oxidation and denitrificatoin tanks and all applications and 2 outlets for the electrical and float switches cables.
with a need to prevent sedimentation on the tank floor.
The lifting stations can be supplied with electrical control devices for
flow fully automatic operation such as float switches and a high-level alarm
makers indicator for a safer use.
 DG DRAGA MA VL GR SM-SB
1.1 ÷ 16.4 kW 0.74 ÷ 4.1 kW 0.9 ÷ 4.1 kW

INDUSTRIAL
Motor power... 1,1 ÷ 4,1 kW
Poles............... 2/4/6
MACS INDUSTRIAL
Motor power... 0,74 kW
Poles............... 4
vulco GRINDER DOMESTIC
Motor power... 0,9 kW
Poles............... 2
SYSTEM M
SYSTEM B
vortex impeller Delivery port... GAS 2½” V
....................... DN65 ÷ DN150 H
open single-channel impeller Delivery port... DN80 H
Free passage... 50 mm multi-channel open impeller impeller with grinder system Delivery port... GAS 1½”-DN32 H
Free passage... - mono e bi-channel closed impeller
SEWER CIVIL Max flow rate. 13.9 l/s CIVIL Max flow rate. 4.3 l/s
SYSTEMS Free passage... max 150 mm
The DRAGA (DG) family consists of electric pumps with set-back Max flow rate. 46.4 l/s The MACS (MA) family consists of electric pumps with single-channel Max head........ 7.0 m hydraulics in cast iron coated with a thick layer of hard-wearing the models with 2 pole motors up to 7.2 kW are fitted with “ACS” Max head........ 20.4 m SM (SYSTEM M), single-channel closed impeller, ample free passage, high
Max head........ 22.3 m Frequency....... 50/60 Hz
vortex impeller which provides ample free passages, often entirely open impeller which allows very high performance and ample polyurethane (Vulkollan) of virtually unlimited duration, allowing (Anti-Clogging System), which guarantees the pump against fouling efficiencies. Applications: soiled liquids with solid particles in suspension;
free passages. Ideal for applications in industry in general and in atex
DGN Frequency....... 50/60 Hz free passages, often entirely free passages, which reduce the risk MAI its application where other materials generate too many problems and ensures prompt restarts even with low power. Suitable for civil, GRS for pumping soiled biological liquids with solid particles in suspension
agriculture, for pumping biological sludges, livestock farm slurry of fouling. Units in this family can be used for lifting sewage, for with excessive wear and insufficient time between services. used in the livestock farming and food industry applications. and strained biological liquids; industry, wastewater treatment plants
and soiled liquids containing solids. wastewater treatment plants, and for industrial applications in ceramics industry, for the processing of granite, marble and glass, models with 4-pole motors from 2.2 to 3.0 kW are fitted with a rugged and sewage systems.
Motor power... 1,1 ÷ 4,1 kW "S"-shaped impeller operating snug against the diffuser plate, with Motor power... 1,5 kW SM (SYSTEM B), dual-channel closed impeller, ample free passage, high
DG models with motors up to 1.5 kW are ideal for applications in general. The location of the blades in the rear of the impeller doubles INDUSTRIAL Poles............... 2/4/6 for metal cutting, in quarries and mines, in aggregate processing DOMESTIC Poles............... 2
industry, agriculture and livestock farming; those with motors up to Motor power... 4,6 ÷ 16,4 kW the water flow through the cooling jacket, in installations in dry systems and in concrete production plants. toothed intake orifice; suitable in agricultural and livestock farming efficiencies. Applications: soiled liquids with solid particles in suspension;
Delivery port... GAS 2½” V Delivery port... GAS 2”-DN32 H
16.4 kW are suitable for processing biological sludges and livestock INDUSTRIAL Poles............... 2/4 chamber, reducing the risk of fouling and ensuring the motor is applications with heavily soiled liquids containing solids which can be for pumping slurries, raw or activated sludges and strained and
....................... DN65 ÷ DN150 H Free passage... -
farm slurry. Delivery port... DN80 ÷ DN125 cooled effectively even in heavy-duty conditions. SEWER Free passage... 40 ÷ 100 mm broken down. CIVIL Max flow rate. 6.3 l/s unstrained biological liquids, rainwater or seepage; for pumping water
SEWER Free passage... max 102 mm SYSTEMS Max flow rate. 53.9 l/s Max head........ 27.3 m for public establishments, and systems for public works or hospitals.
SYSTEMS Max flow rate. 101.4 l/s Max head........ 30.2 m Frequency....... 50/60 Hz
Max head........ 17.9 m
Frequency....... 50/60 Hz
atex
MAN 1.5 ÷ 16.4 kW 0.9 ÷ 4.1 kW GRE 1.5 ÷ 22.0 kW Single channel closed impeller
0.3 ÷ 1.5 kW DGP
Motor power... 0.74 kW Motor power... 1,5 ÷ 16,4 kW Motor power... 0.74 ÷ 1,5 kW Motor power... 1,7 kW Motor power... 1,5 kW
INDUSTRIAL Poles............... 4 INDUSTRIAL Poles............... 2/4 DOMESTIC Poles............... 2 DOMESTIC Poles............... 2 CIVIL Poles............... 2
Delivery port... DN65 ÷ DN100 H Delivery port... DN50 - DN 80 H Delivery port... GAS 1½”-DN32 H Delivery port... GAS 2”-DN32 H Delivery port... GAS 2” DN80 H

DR
Motor power... 0,37 ÷ 0,75 kW Free passage... max 50 mm
Free passage... max 55 mm Free passage... max 54 mm Free passage... - Free passage... -
Poles............... 2 0.25 ÷ 1.5 kW
DRENO
DOMESTIC atex Max flow rate. 17.6 l/s Max flow rate. 49.7 l/s CIVIL Max flow rate. 5.6 l/s CIVIL Max flow rate. 6.8 l/s Max flow rate. 16.1 l/s
Delivery port... GAS 1¼”-1½” V Max head........ 17.2 m
Max head........ 6.9 m Max head........ 30.7 m Max head........ 27 m Max head........ 23.4 m
Free passage... max 40 mm
Motor power... 0,55 ÷ 1,5 kW EXPLOSIVE Frequency....... 50/60 Hz
Max flow rate. 6.3 l/s
Max head........ 10.0 m INDUSTRIAL Poles............... 2/4 ATMOSPHERES MAF VLP GR BluePRO GRI SME
open multi-channel impeller Delivery port... GAS 1½”DN32
....................... GAS 2”- DN50 H
DG-Steel atex ....................... DN65 ÷ DN100 Motor power... 1,1 ÷ 1,5 kW Motor power... 1,5 kW
The DR impeller is suitable for lifting sewage, for wastewater treatment Free passage... max 50 mm INDUSTRIAL Poles............... 2 CIVIL Poles............... 2
plants, and for industrial applications in general. DR models up to 1.5 kW EXPLOSIVE Max flow rate. 17.6 l/s Delivery port... GAS 1½”-DN32 H Delivery port... GAS 2”-DN80 H

Fluid Design
Motor power... 0,3 ÷ 0,74 kW

x-y-b special alloys

Max head........ 16.5 m Free passage... - Free passage... 50 mm
DOMESTIC Poles............... 2 (free passage up to 15 mm) are used for the treatment of mainly clean or aTMOSPHERES DRF atex Max flow rate. 6.4 l/s Max flow rate. 16.1 l/s
Delivery port... GAS 1½” V slightly soiled water. Those up to 19.3 kW (free passage up to 120 mm) are Max head........ 17.2 m
Max head........ 23 m
Free passage... max 40 mm suitable for lifting sewage, for wastewater treatment plants, and for
Max flow rate. 7.7 l/s industrial applications in general. 1.1 ÷ 19.3 kW EXPLOSIVE
Max head........ 11.6 m
The perfect assistant in the design of the
aTMOSPHERES GRF SMI
Frequency....... 50/60 Hz
0.25 ÷ 1.5 kW Motor power... 1,1 ÷ 4,1 kW lifting stations for wastewater
vortex and multi-channel open impeller
DG Blue Poles............... 2/4/6 Motor power... 22,0 kW
INDUSTRIAL
Delivery port... GAS 2½” V DRX, DRY and DGX models are constructed in CF8-M (AISI 316) stainless steel.
1.8 ÷ 7.2 kW INDUSTRIAL Poles............... 4
....................... DN65 ÷ DN150 H With just a few clicks you will be able to calculate the needed Delivery port... DN150 ÷ DN250 H
Motor power... 0,37 ÷ 1,5 kW Motor power... 0,25 ÷ 0,75 kW SEWER drx and dry models are suitable for water with small solid particles Free passage... max 130 mm
DOMESTIC Poles............... 2 Poles............... 2 Free passage... 40 ÷ 100 mm (multi-channel open impellers). dgx models are recommended for heavily SEWER
DOMESTIC SYSTEMS
Max flow rate. 47.1 l/s
capacity, while considering the pressure losses, so that you can Motor power... 1,8 ÷ 4,1 kW Max flow rate. 170 l/s
Delivery port... GAS 1½” - 2” V Delivery port... GAS 1¼”-1½” soiled wastewaters (vortex impeller). recommended for applications SYSTEMS
Max head........ 23.2 m arrive at the product that best suits your needs. INDUSTRIAL Poles............... 2/4 Max head........ 33.0 m
Free passage... max 50 mm Free passage... max 12 mm with corrosive and aggressive liquids, and can therefore be used for Delivery port... GAS 1½”-2” DN32 H
atex Frequency....... 50/60 Hz
CIVIL Max flow rate. 12.6 l/s
Max head........ 15.3 m
Max flow rate. 335 l/m
Max head........ 16.0 m
DRN industrial, chemical and pharmaceutical plants, or with seawater. ....................... DN80 ÷ DN100
SMN
Fluid Design is easy to use and allows you to compare the DRB and DGB models are in B10 bronze. atex Free passage... -
Frequency....... 50/60 Hz suitable for waters with small solid particles (DRB) and heavily soiled Max flow rate. 29.6 l/s
difference in performance of various Zenit pumps in the plant you
DG BluePRO DR-Steel INDUSTRIAL
Motor power... 4,1 ÷ 19,3 kW
Poles............... 2/4/6 have designed.
water (DGB). recommended for marine, fish farming and livestock Max head........ 47.6 m
Frequency....... 50/60 Hz
Motor power... 3,0 ÷ 16,4 kW
Delivery port... DN80 ÷ DN150 H
farming contexts.
GRN INDUSTRIAL Poles............... 2/4/6
Free passage... max 125 mm Delivery port... DN80 ÷ DN250 H
Motor power... 0,37 ÷ 1,5 kW Motor power... 0,3 ÷ 0,74 kW SEWER Fluid Design is available at www.zenit.com.
DOMESTIC Max flow rate. 140.9 l/s SEWER Free passage... 53 ÷ 130 mm
DOMESTIC Poles............... 2 Poles............... 2
Delivery port... GAS 2” V Delivery port... GAS 1¼” V
SYSTEMS
Max head........ 52.6 m 0.37 ÷ 15.0 kW INOX AISI 316 Motor power... 7,2 kW SYSTEMS Max flow rate. 182.9 l/s
Max head........ 39.3 m
....................... GAS 2” DN50 H Free passage... 7 mm Frequency....... 50/60 Hz INDUSTRIAL Poles............... 2
CIVIL Free passage... max 50 mm Max flow rate. 5.3 l/s Delivery port... GAS 2” DN32 H
Max flow rate. 11.6 l/s Max head........ 14.2 m DRP Motor power... 0.37 ÷ 1,5 kW Free passage... -
SMP
Max head........ 15.7 m Frequency....... 50/60 Hz 0.74 ÷ 1.5 kW 0.74 ÷ 1.5 kW INDUSTRIAL Poles............... 2 Max flow rate. 6.7 l/s
Frequency....... 50/60 Hz Delivery port... GAS 1¼”-2” V Max head........ 53.9 m
DGE DR Blue Free passage... max 15 mm Motor power... 0,74 ÷ 1,5 kW
Motor power... 1,1 kW Motor power... 1,1 ÷ 1,5 kW Max flow rate. 12.5 l/s INDUSTRIAL
CIVIL Poles............... 2 CIVIL Poles............... 2 Max head........ 17.8 m GRP Poles............... 2
Delivery port... GAS 2” DN80 H
Motor power... 0,37 ÷ 1,5 kW Motor power... 0,37 ÷ 1,5 kW

ap
Delivery port... GAS 1½”-DN32 H Delivery port... GAS 1½”-DN32 H Free passage... 50 mm
DOMESTIC Poles............... 2/4 DOMESTIC Poles............... 2 Free passage... 4 Free passage... max 7 mm atex
Delivery port... GAS 1½”÷ 2½” V Delivery port... GAS 1¼” - 2” V Max flow rate. 4.8 l/s INDUSTRIAL Max flow rate. 7.6 l/s DRX Max flow rate. 14 l/s

alta prevalenza
Max head........ 16.1 m
....................... GAS 2” DN50 H Free passage... max 15 mm Max head........ 26 m Max head........ 22.6 m
CIVIL EXPLOSIVE
CIVIL ....................... DN65/80 H
Free passage... max 80 mm
Max flow rate. 11.5 l/s
Max head........ 17.0 m EXPLOSIVE Motor power... 0,37 ÷ 1,5 kW
0.37 ÷ 1.5 kW BRONZE B10 aTMOSPHERES SMF
Max flow rate. 19.0 l/s
Max head........ 17.3 m
Frequency....... 50/60 Hz high head impeller APBluePROHP aTMOSPHERES APF INDUSTRIAL Poles............... 2/4
Delivery port... GAS 2” V
DGO Frequency....... 50/60 Hz DR BluePRO models up to 1.5 kW are suitable for clear wastewaters. mainly used ......................... DN65-DN80 H Motor power... 0,37 ÷ 1,5 kW 6.5 ÷ 50.0 kW Dual channel closed impeller
in civil or professional applications, with solid particles up to 7 mm. Motor power... 0,9 kW 1.8 ÷ 10 kW Free passage... max 60 mm INDUSTRIAL Poles............... 2
Motor power... 0,74 ÷ 1,5 kW Motor power... 0,37 ÷ 1,5 kW models up to 10 kW are mainly used for professional, agricultural, CIVIL Poles............... 2 Max flow rate. 18.4 l/s Delivery port... GAS 2” V
Poles............... 2/4 DOMESTIC Poles............... 2 fish farming, irrigation and civil applications. Delivery port... GAS 1½”-DN32 H Max head........ 14.9 m Free passage... max 38 mm Motor power... 18,5 ÷ 50,0 kW
DOMESTIC Motor power... 1,8 ÷ 4,1 kW
Free passage... 7 mm Max flow rate. 10.6 l/s INDUSTRIAL Poles............... 4/6
Delivery port... DN80 H
Free passage... max 80 mm
Delivery port... GAS 1¼”- 2” V
....................... GAS 2” DN50 H
The high manometric head ensures excellent results for the water
features and decorative fountains. Max flow rate. 5.2 l/s CIVIL Poles............... 2 DGX Max head........ 15 m Delivery port... DN150 ÷ DN300 H
Max flow rate. 15.2 l/s CIVIL Free passage... max 15 mm Max head........ 20.3 m Delivery port... GAS 1½”-2” DN32 H Free passage... 90 ÷ 140 mm
CIVIL SEWER
Free passage... max 10 mm Max flow rate. 378 l/s
Max head........ 8.4 m Max flow rate. 12.6 l/s
Max head........ 18.0 m INDUSTRIAL Max flow rate. 10 l/s Motor power... 2,4 ÷ 15 kW DGB SYSTEMS
Max head........ 53.2 m
Frequency....... 50/60 Hz APS Max head........ 38.7 m INDUSTRIAL Poles............... 2/4
DGI DRE 0.74 ÷ 1.5 kW Frequency....... 50/60 Hz Delivery port... DN65 ÷ DN100 H atex
atex Free passage... max 80 mm Motor power... 0,37 ÷ 1,5 kW SBN
Motor power... 1,5 kW APN Max flow rate. 72.8 l/s INDUSTRIAL Poles............... 2
Motor power... 0,55 ÷ 1,5 kW Motor power... 0,37 ÷ 1,5 kW Motor power... 0.74 ÷ 1,5 kW Max head........ 40.2 m Delivery port... GAS 1¼”-2” V
CIVIL Poles............... 2 Free passage... max 15 mm
INDUSTRIAL Poles............... 2/4 DOMESTIC Poles............... 2/4 CIVIL Poles............... 2 Motor power... 6,5 ÷ 12,3 kW
Delivery port... GAS 2”-DN32 H Motor power... 7,2 ÷ 10 kW Max flow rate. 12.5 l/s
Delivery port... GAS 1½”÷2½” V Delivery port... GAS 1¼”÷ 2½” V Delivery port... GAS 1½”-DN32 H CIVIL INDUSTRIAL Poles............... 2/4/6
....................... DN65/DN80 H ....................... GAS 2” DN50 H Free passage... max 6 mm
Free passage... 7 mm
Max flow rate. 9.5 l/s
Poles............... 2
Delivery port... GAS 2” DN32 H
DRY Max head........ 18 m Delivery port... DN80 ÷ DN250 H
atex Free passage... max 80 mm CIVIL Free passage... max 15 mm Max flow rate. 7.1 l/s Max head........ 24.9 m SEWER Free passage... 36 ÷ 140 mm
Free passage... 10 mm
Max flow rate. 16.7 l/s
Max head........ 17.5 m
Max flow rate. 13 l/s
Max head........ 18.4 m
Max head........ 26.6 m
Frequency....... 50/60 Hz
Frequency....... 50/60 Hz INDUSTRIAL Max flow rate. 11.8 l/s drb SYSTEMS Max flow rate. 232.6 l/s
Max head........ 34.2 m
EXPLOSIVE
aTMOSPHERES DGF DRO Frequency....... 50/60 Hz
AP BluePRO APE Max head........ 58.3 m Frequency....... 50/60 Hz

APP All the photos, weight and dimensions are indicative only. The information contained herein is not binding. SBP
Zenit reserves the right to alter the product without prior notice
 Zenit Group ranks among the top international names in the design and
manufacture of water treatment technologies. Its core business is the design
and manufacture of submersible electric pumps for domestic and industrial use. Thanks to the
knowledge and experience it has acquired over the years Zenit has also featured oxygenating and
mixing devices on the market, providing a comprehensive range of products designed to meet the
most demanding needs. Today Zenit is a Group of companies with direct control over the markets
it serves, thanks to a targeted territorial presence. Although the various companies of the group
are located accross the globe, they all pursue a single mutual objective. As a result of a sequence
of successful strategic managerial decisions today Zenit Group is a global player.

We are convinced that the path we have taken is the right one and intend to proceed
further in the same direction guided by the three pillars of our corporate vision: People,
Product, Passion

PEOPLE
PRODUCT
PASSION
Zenit Italia Zenit Europe
Headquarter, production site Sales office and regional office for Europe, the
and sales office for the Italian market Middle East, Africa, North and South America
Via dell’Industria 11 29-31 Zone Artisanale “Op Zaemer”
41018 San Cesario sul Panaro (MO), Italy 4959 Bascharage, Luxembourg
Tel. (+39) 059.950.611 Fax (+39) 059.597.0399 Tel. (+352) 270.305 Fax (+352) 246.111.76
Mail [email protected] Mail [email protected]

Zenit China Zenit Asia Pacific

Production site and sales office Sales Company for the Asia-Pacific region
for the Chinese market
30 Toh Guan Road - #08-07
26 Wupu Road, Shengpu dc. ODC Districentre, Singapore 608840
Suzhou Industrial Park, 215126 Jiangsu, P.R.C. Tel. (+65) 656.011.01 Fax (+65) 656.011.41
Tel. (+86) 512.628.718.88 Fax (+86) 512.628.718.66 Mail [email protected]
Mail [email protected]
10/2012 - EN

join our www.zenit.com

water
movement