COMPOSITE INSULATOR

Tucheng International

ANSI Standard Type

COMPOSITE LONGE ROD SUSPENSION INSULATOR

PDI 16mm Diameter Rod Deadend Insulators

Mechanical Characteristics
Item No. of Length Diameter Net Wt. Torsion SML RTL Proof
Cat.No.
No. Sheds (mm) (mm) (kg) (N-m) (kN) (kN) (kN)
1 02010503-01 4 318 92 0.95 47 70 35 44.5
2 02010503-02 4 318 92 0.95 55 70 35 44.5
3 02010703-01 8 445 76 1.1 47 70 35 44.5
4 02010703-02 8 445 76 1.1 55 70 35 44.5
5 02010603-01 8 475 89 1.3 47 70 35 44.5
6 02010603-02 8 475 89 1.3 55 70 35 44.5
7 02010803 8 635 76 1.5 47 70 35 44.5

NOTE:PDI Type insulators are intended for applications which are within 45°of horizontal-to allow proper
shed drainage.

[email protected] http://www.tcipower.com
Tel: +86-411-82789881 Fax: +86-411-82789913
 COMPOSITE INSULATOR
Tucheng International

ANSI Standard Type

COMPOSITE LONG ROD SUSPENSION INSULATOR

PDI 16mm Diameter Rod Dead end Insulators

Electrical Characteristics
Item Cat.No. Leakage Dry Arc Flashover Critical RIV Power Volt*/
No. Distance Distance (kV) Flashover(kV) Arc Class
(mm) (mm) Dry Wet Pos. Neg. Test-kV Max- KA
μV cycles
1 02010503-01 406 203 110 75 140 160 15 10 150 15
2 02010503-02 406 203 110 75 140 160 15 10 150 D3-15
3 02010703-01 660 311 130 110 200 225 20 10 150 25
4 02010703-02 660 311 130 110 200 225 20 10 150 DS-28
5 02010603-01 787 356 150 130 260 280 30 10 150 25&35
6 02010603-02 787 356 150 130 260 280 30 10 150 DS-35
7 02010803 838 508 200 160 325 360 30 10 150 35

[email protected] http://www.tcipower.com
Tel: +86-411-82789881 Fax: +86-411-82789913
 COMPOSITE INSULATOR
Tucheng International

ANSI Standard Type

COMPOSITE LONG ROD SUSPENSION INSULATORS

VLS 16mm Diameter Rod Suspension Insulators

Mechanical Characteristics
Item Cat. No. No. of Length Diameter Net Wt. SML RTL Proof
No. sheds (mm) (mm) (kg) (kN) (kN) (kN)
1 02010103 6 438 150 1.8 70 35 44.5
2 02010203 8 584 150 2.3 70 35 44.5
3 02010303 10 730 150 2.8 70 35 44.5
4 02010403 12 876 150 3.2 70 35 44.5

Electrical Characteristics
Item Cat.No. Leakage Dry Arc Flashover Critical RIV Power Volt*/
No. Distance distance (kV) Flashover Arc Class
(mm) (mm) (kV) KA
Dry Wet Pos. Neg. Test-kV Max- Cycles
μV
1 02010103 991 457 190 140 320 330 32 10 150 35/46
2 02010203 1372 602 255 190 420 435 48 10 150 46/69
3 02010303 1753 749 315 245 500 510 48 10 150 69
4 02010403 2134 894 370 305 610 580 48 10 150 69

NOTE:VLS insulators are available with ANSI and IEC ball/socket end fittings and also with clevis/tongue
End fittings.

[email protected] http://www.tcipower.com
Tel: +86-411-82789881 Fax: +86-411-82789913
 COMPOSITE INSULATOR
Tucheng International

ANSI Standard Type

COMPOSITE LONE ROD SUSPENSION INUSLATOR

Mechanical Ratings
SML=25,000lbs.(111kN)
RTL=12,500lbs.(56kN)

Usual Low frequency Critical Impulse

Section Leakage Arcing Approx.
Item System Flashover Flashover
Cat. No. Length Distance Distance Weight
No. Volt.
(mm) (mm) (mm) (kg)
(kV) Dry-kV Wet-kV Pos.-kV Neg.-kV
1 02011004-01 69 881 1549 627 245 240 410 390 2.2
2 02011004-02 69 915 1816 688 310 275 460 490 3.7
3 02011004-03 69 1034 1930 780 310 295 505 490 4.0
4 02011004-04 69 1125 2401 892 385 340 585 620 4.3
5 02011104-01 115 1189 2337 935 370 350 605 595 4.2
6 02011104-02 115 1215 2673 988 420 370 645 680 4.6
7 02011104-03 115 1380 2692 1155 450 385 735 750 4.8
8 02011204-01 138 1346 2718 1090 430 405 700 695 3.2
9 02011204-02 138 1455 3359 1228 510 450 790 835 5.3
10 02011204-03 138 1535 3632 1325 515 435 840 860 5.7
11 02011204-04 138 1635 3874 1408 575 510 900 950 5.8
12 02011304-01 161 1501 3099 1247 490 455 795 795 5.2
13 02011304-02 161 1651 3505 1435 550 465 900 910 5.4
14 02011304-03 161 1785 4288 1552 625 560 985 1045 6.2
15 02011304-04 161 1815 3556 1595 610 555 985 1010 5.6
16 02011304-05 161 1935 4731 1709 685 610 1080 1145 6.6
17 02011304-06 161 2055 5074 1829 730 650 1155 1220 7.0
18 02011304-07 161 2105 5080 1885 730 650 1155 1120 7.3
19 02011404-01 230 1966 4267 1712 655 605 1080 1090 5.7
20 02011404-02 230 2055 5074 1829 730 650 1155 1220 7.0
21 02011404-03 230 2121 4674 1867 710 655 1170 1185 6.8
22 02011404-04 230 2205 5488 1973 780 700 1245 1315 7.4
23 02011404-05 230 2355 5932 2129 840 750 1340 1415 7.9
24 02011404-06 230 2431 5436 2174 810 750 1350 1370 7.3
25 02011404-07 230 2505 6346 2273 890 795 1425 1505 8.3
26 02011404-08 230 2642 6731 2420 935 835 1500 1580 8.6
27 02011504-01 345 2586 5817 2329 855 790 1440 1465 8.0
28 02011504-02 345 2625 6689 2393 935 835 1500 1580 8.6
29 02011504-03 345 2743 6223 2487 970 870 1560 1645 8.0
30 02011504-04 345 2896 6604 2639 1010 905 1640 1730 7.8
31 02011504-05 345 3015 7818 2790 1050 940 1740 1835 9.8
32 02011504-06 345 3205 7366 2951 1115 1000 1900 2000 8.3
NOTE: 1.All section lengths are based on Y-Ball end fitting.
2.Electrical values are per ANSI standards and without corona rings.
3.Tolerances and tests are as per ANSI C29.11

[email protected] http://www.tcipower.com
Tel: +86-411-82789881 Fax: +86-411-82789913
 COMPOSITE INSULATOR
Tucheng International

ANSI Standard Type

COMPOSITE LONG ROD SUSPENSION INSULATORS

Mechanical Ratings
SML=30,000lbs.(111kN)
RTL=12,500lbs.(67kN)
Usual Low frequency Critical Impulse
Section Leakage Arcing Approx.
Item System Flashover Flashover
Cat. No. Length Distance Distance Weight
No. Volt.
(mm) (mm) (mm) (kg)
(kV) Dry-kV Wet-kV Pos.-kV Neg.-kV
1 02011005-01 69 881 1549 627 245 240 410 390 2.2
2 02011005-02 69 915 1816 688 310 275 460 490 3.7
3 02011005-03 69 1034 1930 780 310 295 505 490 4.0
4 02011005-04 69 1125 2401 892 385 340 585 620 4.3
5 02011105-01 115 1189 2337 935 370 350 605 595 4.2
6 0201105-02 115 1215 2673 988 420 370 645 680 4.6
7 02011105-03 115 1380 2692 1155 450 385 735 750 4.8
8 02011205-01 138 1346 2718 1090 430 405 700 695 3.2
9 02011205-02 138 1455 3359 1228 510 450 790 835 5.3
10 02011205-03 138 1535 3632 1325 515 435 840 860 5.7
11 02011205-04 138 1635 3874 1408 575 510 900 950 5.8
12 02011305-01 161 1501 3099 1247 490 455 795 795 5.2
13 02011305-02 161 1651 3505 1435 550 465 900 910 5.4
14 02011305-03 161 1785 4288 1552 625 560 985 1045 6.2
15 02011305-04 161 1815 3556 1595 610 555 985 1010 5.6
16 02011305-05 161 1935 4731 1709 685 610 1080 1145 6.6
17 02011305-06 161 2055 5074 1829 730 650 1155 1220 7.0
18 02011305-07 161 2105 5080 1885 730 650 1155 1120 7.3
19 02011405-01 230 1966 4267 1712 655 605 1080 1090 5.7
20 02011405-02 230 2055 5074 1829 730 650 1155 1220 7.0
21 02011405-03 230 2121 4674 1867 710 655 1170 1185 6.8
22 02011405-04 230 2205 5488 1973 780 700 1245 1315 7.4
23 02011405-05 230 2355 5932 2129 840 750 1340 1415 7.9
24 02011405-06 230 2431 5436 2174 810 750 1350 1370 7.3
25 02011405-07 230 2505 6346 2273 890 795 1425 1505 8.3
26 02011405-08 230 2642 6731 2420 935 835 1500 1580 8.6
27 02011505-01 345 2586 5817 2329 855 790 1440 1465 8.0
28 02011505-02 345 2625 6689 2393 935 835 1500 1580 8.6
29 02011505-03 345 2743 6223 2487 970 870 1560 1645 8.0
30 02011505-04 345 2896 6604 2639 1010 905 1640 1730 7.8
31 02011505-05 345 3015 7818 2790 1050 940 1740 1835 9.8
32 02011505-06 345 3205 7366 2951 1115 1000 1900 2000 8.3
NOTE: 1.All section lengths are based on Y-Ball end fitting.
2.Electrical values are per ANSI standards and without corona rings.
3.Tolerances and tests are as per ANSI C29.11

[email protected] http://www.tcipower.com
Tel: +86-411-82789881 Fax: +86-411-82789913
 COMPOSITE INSULATOR
Tucheng International

ANSI Standard Type

COMPOSITE LONG ROD SUSPENSION INSULATOR

Mechanical Ratings
SML=30,000lbs.(133kN)
RTL=15,000lbs.(67kN)

Usual Low frequency Critical Impulse

Section Leakage Arcing Approx.
Item System Flashover Flashover
Cat. No. Length Distance Distance Weight
No. Volt.
(mm) (mm) (mm) Dry-kV Wet-kV Pos.-kV Neg.-kV (kg)
(kV)
1 02011505-01 345 3330 8575 3054 1115 1000 1905 2005 10.8
2 02011505-02 345 3581 9440 3350 1180 1055 2065 2170 12.0
3 02011505-09 345 3600 9362 3330 1185 1060 2070 2180 11.6
4 02011605-03 500 3840 10048 3570 1235 1110 2220 2335 12.3
5 02011605-02 500 4260 11248 3991 1325 1190 2475 2605 13.5
6 02011605-03 500 4445 13185 4205 1360 1205 2610 2715 14.5
7 02011605-04 500 4565 12106 4291 1390 1245 2660 2795 14.4
8 02011605-05 500 4674 13175 4440 1410 1275 2770 2885 14.7
9 02011605-06 500 4925 13135 4652 1455 1305 2875 3025 15.5

NOTE: 1.All section lengths are based on Y-Ball end fitting.

2.Electrical values are per ANSI standards and without corona rings.
3.Tolerances and tests are as per ANSI C29.11

[email protected] http://www.tcipower.com
Tel: +86-411-82789881 Fax: +86-411-82789913
 COMPOSITE INSULATOR
Tucheng International

ANSI Standard Type

COMPOSITE LONG ROD SUSPENSION INSULATOR

Mechanical Ratings
SML=50,000lbs.(222kN)
RTL=25,000lbs.(111kN)

Usual Low frequency Critical Impulse

Section Leakage Arcing Approx.
Item System Flashover Flashover
Cat. No. Length Distance Distance Weight
No. Volt.
(mm) (mm) (mm) Dry-kV Wet-kV Pos.-kV Neg.-kV (kg)
(kV)
1 02011306-01 161 1574 3073 1245 490 455 795 795 8.0
2 02011306-02 161 1727 3886 1385 530 450 870 880 9.2
3 02011306-03 161 1882 3835 1554 600 555 985 990 9.0
4 02011306-04 161 2032 4775 1675 660 550 1060 1100 10.0
5 02011306-05 161 2159 5080 1985 760 650 1250 1270 10.7
6 02011406-01 230 2347 5004 2019 760 700 1260 1280 11.5
7 02011406-02 230 2489 5969 2135 840 760 1340 1360 11.5
8 02011406-03 230 2502 5385 2174 810 745 1350 1370 11.0
9 02011406-04 230 2659 5791 2329 855 790 1440 1465 11.5
10 02011506-01 345 2967 6553 2639 945 875 1615 1650 12.2
11 02011506-02 345 3124 7849 2780 990 915 1705 1740 14.4
12 02011506-03 345 3279 7315 2951 1030 955 1790 1830 14.8
13 02011506-04 345 3378 8585 3040 1075 1005 1880 1915 15.6
14 02011506-05 345 3586 8103 3259 1110 1035 1960 2005 15.0
15 02011606-01 500 3886 8382 3535 1180 1105 2125 2175 15.2
16 02011606-02 500 4209 9627 3879 1245 1175 2285 2345 16.5
17 02011606-03 500 4445 13106 4110 1275 1200 2365 2420 22.2
18 02011606-04 500 4519 10414 4191 1305 1240 2445 2510 18.4
19 02011606-05 500 4676 13106 4340 1330 1270 2520 2590 21.9

NOTE: 1.All section lengths are based on Y-Ball end fitting.

2.Electrical values are per ANSI standards and without corona rings.
3.Tolerances and tests are as per ANSI C29.11

[email protected] http://www.tcipower.com
Tel: +86-411-82789881 Fax: +86-411-82789913
 COMPOSITE INSULATOR
Tucheng International

ANSI Standard Type

COMPOSITE LONG ROD SUSPENSION INSULATOR

COMPOSITE LONG ROD SUPSPENSION INSULATOR

38mm Diameter Rod Line Post

SML Oval Eye Y-Clevis Clevis Tongue Socket/Ball

LBS F B ANSI
A B C D B A C A B C Type
(kN) Min. Min Class
25,000 1.02 2.0 0.63 0.63 1.54 0.75 0.75 0.98 0.69 0.53 0.52 0.69
J 52-5
(111) (26) (51) (16) (16) (39) (19) (19) (25) (17.5) (13.5) (13.3) (17.5)
30,000 1.02 2.0 0.87 0.87 1.57 0.875 0.75 0.98 0.69 0.53 0.52 0.69
J 52-5
(133) (26) (51) (22) (22) (40) (22) (19) (25) (17.5) (13.5) (13.3) (17.5)
50,000 1.02 2.0 0.87 0.87 1.57 0.875 1.06 1.26 0.94 0.90 0.59 0.94
K 52-11
(222) (26) (51) (22) (22) (40) (22) (27) (32) (24) (22.8) (14.9) (24)

[email protected] http://www.tcipower.com
Tel: +86-411-82789881 Fax: +86-411-82789913
 COMPOSITE INSULATOR
Tucheng International

ANSI Standard Type

COMPOSITE LINE POST INSULATORS

Design Tension Strength:11kN

Item Cat No. Post Usual “X” Dry Arc Leakage Low Freq. Critical SCL RCL Net
No. Style System Length distance Distance Flashover Flashover (kN) (kN) Weight
Voltage (mm) (mm) (mm) (kV) (kV) (kg)
(kV) Dry Wet Pos. Neg.
1 02010801-01 Horiz. 35 427 299 591 135 100 195 210 10 5 4.2
2 02010801-02 Horiz. 35 450 299 591 145 110 205 215 10 5 3.4
3 02010801-03 Ver. 35 450 299 591 145 110 205 215 10 5 3.4
4 02010901-01 Horiz. 46 470 356 778 150 115 225 265 10 5 4.4
5 02010901-02 Horiz. 46 488 356 778 160 125 235 270 10 5 3.7
6 02010901-03 Vert. 46 473 356 778 160 125 235 270 10 5 3.7
NOTE:1.SCL is the ultimate cantilever strength rating.

[email protected] http://www.tcipower.com
Tel: +86-411-82789881 Fax: +86-411-82789913
 COMPOSITE INSULATOR
Tucheng International

2.RCL is the maximum continuous cantilever load at which the post should be applied.
ANSI Standard Type
COMPOSITE LINE POST INSULATORS

Line Post Line Fittings Dimensions(in mm)

Type A B C D E F G H I
H.Clamptop Cap 101.6 120.6 15.7 9.6 17.5 5/8-11UFS-2B 57.2 - -
V.Clamptop Cap 101.6 136.6 28.4 9.6 - 5/8-11UFS-2B 57.2 81.0 35.0

[email protected] http://www.tcipower.com
Tel: +86-411-82789881 Fax: +86-411-82789913
 COMPOSITE INSULATOR
Tucheng International

ANSI Standard Type

COMPOSITE LINE POST INSULATORS

Maximum Design
Clamptop:11kN
Blade:44.5kN

Cat.No. Post Usual “X” Dry Arc Leakage Low Freq. Citical SCL RCL’ Net
Style System Diameter Distance Distance Flashover Flashover (kN) (kN) Weight
Voltage (mm) (mm) (mm) (kV) (kV) (kg)
(kV) Dry Wet Pos. Neg.
02011001-01 Horiz. 69 654 533 1295 210 190 350 425 10.9 5.4 12.4
02011001-02 Horiz. 69 641 533 1295 210 190 350 425 10.9 5.4 12.2
02011001-03 Horiz. 69 641 533 1295 210 190 350 425 10.9 5.4 12.4
02011001-04 Horiz. 69 692 533 1295 210 190 350 425 10.9 5.4 8.3
02011001-05 Horiz. 69 692 533 1295 210 190 350 425 10.9 5.4 8.3
02011001-06 Horiz. 69 679 533 1295 210 190 350 425 10.9 5.4 8.1
02011001-07 Horiz. 69 679 533 1295 210 190 350 425 10.9 5.4 8.1
02011001-08 Horiz. 69 679 533 1295 210 190 350 425 10.9 5.4 8.3
02011001-09 Horiz. 69 679 533 1295 210 190 350 425 10.9 5.4 8.3
02011001-10 Vert. 69 699 533 1295 210 170 350 425 10.9 5.4 9.1
02011001-11 Vert. 69 699 533 1295 210 170 350 425 10.9 5.4 9.1

Note:1.SCL is the ultimate cantilever strength rating.

2.RCL is the maximum continuous cantilever load at which the post should be applied.

[email protected] http://www.tcipower.com
Tel: +86-411-82789881 Fax: +86-411-82789913
 COMPOSITE INSULATOR
Tucheng International

ANSI Standard Type

COMPOSITE LINE POST INSULATORS

127mm Bolt Circle

Line Post Base Fittings Dimensions(in mm)

Type A B C D E F G H
H.Gain Base 368.3 177.8 304.8 254 171.4 32X22 22.4 101.6
3/4-10 UFS-2B or7/8-9
Stud Base 130.0 73.0 127 38.1 12.7 - -
UFS-2B
3” Bolt Circle 69.8 73.0 76.2 108.0 15.2 1/2-13 UFS-2B - -
5” Bolt Circle 82.6 73.0 127 158.8 11.9 5/8-11 UFS-2B pr 18 Dia. - -

[email protected] http://www.tcipower.com
Tel: +86-411-82789881 Fax: +86-411-82789913
 COMPOSITE INSULATOR
Tucheng International

ANSI Standard Type

COMPOSITE LINE POST INSULATORS

Line Post Line Fittings Dimensions(in mm)

Type A B C D E F G H I
H. Clamptop Cap 101.6 120.6 15.7 9.6 17.5 5/8-11 UFS-2B 73.0 - -
v. Clamptop Cap 101.6 136.6 28.4 9.6 - 5/8-11 UFS-2B 73.0 122.2 66.8
Two Hole Blade 69.8 35.0 12.7 101.6 19.0 25.4 Dia. 12.7R 11.2R 73.0
One Hole Blade 101.6 57.2 19.0 25.4 73.0 - - - -

[email protected] http://www.tcipower.com
Tel: +86-411-82789881 Fax: +86-411-82789913
 COMPOSITE INSULATOR
Tucheng International

ANSI Standard Type

COMPOSITE LINE POST INSULATORS

Fig.No. A(mm) B(mm) C(mm)

Ultimate Body 1 177.8 19.0 15.9
Fig.No. Clamping Range(mm)
Strength(kg) 1 177.8 19.0 19.0
1 6.3-14.4 1273 1 203.2 22.2 22.2
1 12.7-26.9 1273 2 44.4 19.0 15.9
1 25.4-38.1 1273 2 44.4 19.0 19.0
2 38.1-50.8 1273 2 50.8 22.2 22.2

[email protected] http://www.tcipower.com
Tel: +86-411-82789881 Fax: +86-411-82789913
 COMPOSITE INSULATOR
Tucheng International

ANSI Standard Type

COMPOSITE LINE POST INSULATORS

63.5mm Rod Diameter Horizontal Line Posts

Clamptop:
Maximum Design Tension=2,500lb(11.1kN)
Two-Hole Blade:
Maximum Design Tension=7,500lb(33.4kN)

Catalog# Usual “X” No. Dry Arc Leakage Low Freq. Critical RCL Net
With Gain System Length Of Distance Distance Flashover Flashover (kN) Weight
Base& Voltage (mm Sheds (mm) (mm (kV) (kV) (kg)
Clamptop end (kV) Dry Wet Pos. Neg.
Fittings
02011002H-01 69 851 8 584 1372 215 195 340 455 11.1 21.3
02011002H-02 69 980 10 711 1727 270 245 420 535 11.1 22.7
02011002H-03 69 1115 12 838 2083 325 295 505 620 9.5 24.5

NOTE:RCL is the maximum continuous load at which the post should be applied.

[email protected] http://www.tcipower.com
Tel: +86-411-82789881 Fax: +86-411-82789913
 COMPOSITE INSULATOR
Tucheng International

ANSI Standard Type

COMPOSITE LINE POST INSULATORS

63.5 mm Rod Diameter Vertical Line Posts

Maximum Design Tension

2,500lb(11.1kN)

Catalog# Usual “X” No. Dry Arc Leakage Low Freq. Critical RCL Net
With 5” Bolt System Length Of Distance Distance Flashover Flashover (kN) Weigth
Circle&Vert. Voltage (mm) Sheds (mm) (mm) (kV) (kV) (kg)
Clamptop (kV) Dry Wet Pos. Neg.
02011002V-01 69 780 8 584 1371 215 195 340 455 11.1 12.3
02011002V-02 69 912 10 711 1727 270 245 420 535 11.0 13.6

NOTE:RCL is the maximum cantilever continuous load at which the post should be applied.

[email protected] http://www.tcipower.com
Tel: +86-411-82789881 Fax: +86-411-82789913
 COMPOSITE INSULATOR
Tucheng International

ANSI Standard Type

COMPOSITE LINE POST INSULATORS
63.5mm Rod Diameter Base Fittings

Horizontal & Vertical Bases DIMENSIONS(in mm)

Type A B C D E F G H I J K
Unitary D.I.Gain 304.8 355.6 44.4 204.7 - 89.9 12.7 12° 23.9 23.9X33.3 48.3
Unitary D.I. Flat 254 309.9 203.2 254 127 - 20.3 12° 23.9 - -
5” B.C. 120.6 158.8 92.2 22.9 127 - - - 17.5 - -
5”B.C. 120.6 158.8 92.2 22.9 127 - - - 5/8-11UFS -
Al Gain 304.8 355.6 - 204.7 155.7 141.2 12.7 12° 23.9 23.9X33.3 -
AL Gain 304.8 355.6 - 204.7 155.7 141.2 12.7 12° 20.6 23.9X33.3
Steel Gain 304.8 355.6 203.2 254 165.1 101.6 12.7 12° 23.9 23.9X33.3 -
AL Flat 254 304.8 203.2 254 127 101.6 12.7 12° 23.9 - -
AL Flat 254 304.8 203.2 254 127 101.6 12.7 12° 20.6 - -
Steel Flat 330.2 381 203.2 254 165.1 101.6 12.7 12° 28.6X23.9 23.9X50.8 304.8
Al Flat 330.2 381 203.2 254 165.1 101.6 12.7 12° 23.9 23.9X33.3 304.8
Al Flat 330.2 381 203.2 254 165.1 101.6 12.7 12° 20.6 20.6X33.3 304.8

[email protected] http://www.tcipower.com
Tel: +86-411-82789881 Fax: +86-411-82789913
 COMPOSITE INSULATOR
Tucheng International

ANSI Standard Type

COMPOSITE LINE POST INSULATORS

63.5mm Rod Diameter Line Fittings

Transverse compressing Swing Angle

For Conductor Suspension Clamp
2 Hole Blade(Std.) 2Hole Long Blade
40deg.max. 64deg.max.
Two Hole Blade
*12°upsweep post angles

Horizontal & Vertical End Fittings Dimensions(in mm)

Type A B C D E F G H I J L M
2 Hole Blade 145.5 101.6 - 19.0 133.4 31.8 38.1 50.8 25.4 36.6 12.7 11.2
2 Hole
145.5 101.6 - 19.0 196.8 31.8 101.6 114.3 25.4 36.6 12.7 11.2
Long Blade
H.Clamptop 209.3 101.6 83.8 28.4 119.9 101.6 - - 5/8-11UFS 19.0 - -
5B.C. 120.6 158.8 92.2 22.9 127 - - - 5/8-11UFS - - -
5” B.C/ 120.6 158.8 92.2 22.9 127 - - - 18xHoles - - -
V.Clamptop 149.4 101.6 83.8 28.4 136.4 101.6 26.9 - 5/8-11UFS - - -

[email protected] http://www.tcipower.com
Tel: +86-411-82789881 Fax: +86-411-82789913