Scribd Logo
Upload

Welcome to Scribd!

  • 27 views

    Type of Main Cylinder For Pumping

    Uploaded by

    محمد عابدين

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Type of Main Cylinder For Pumping

    Uploaded by

    محمد عابدين
    27 views2 pages

    Original Title

    fc5711_0077978bc75f4fefab8fa6d893e85025

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    27 views2 pages

    Type of Main Cylinder For Pumping

    Uploaded by

    محمد عابدين

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    JSI - EN - 05- 3B - 001 Date Feb 1st, 2005

    Total Pages 2 P re s e n t P a g e 1
    Written by IL KYU, AN Approved by IN JAE, HWANG
    Subject M55 main cylinder

    ■ Type of main cylinder for pumping


    Specification
    Part Number External Dia. Remark
    (tube/rod×stroke)
    M33, M37, M40
    J011600C Φ130/Φ80×2100 Φ160
    M42, M43, M50
    M55 J011500 Φ140/Φ80×2100 Φ160
    J181600
    JM-2100HP Φ160/Φ90×2100 Φ190 Left / Right
    J181680
    JFS-12H J011600C Φ130/Φ80×2100 Φ160
    M28 J121600 Φ120/Φ63×1600
    M20 J151600 Φ110/Φ63×1400

    ※ Comparing M55 to M33, M37, etc the wall thickness of cylinder


    tube is different even though the external diameter is the same.

    ■ Distinguishing M55 main cyl. from others


    ① Check the carve letter which is located on the end of the
    cylinder.(water box side)

    D 130

    Fig. 1 Main cylinder carve letter(J011600C, M37)

    JUNJIN HEAVY INDUSTRY SERVICE DEPARTMENT 428-1 Doosung-ri Maengdong-Myun Eumsung-Gun Chungbuk, Korea
    Tel : (+82)43 877-3023    Fax : (+82)43 882-3023 E-MAIL : [email protected]
    ⓒ COPYRIGHT 2005 JUNJIN HEAVY INDUSTRY CO., LTD. ALL RIGHTS RESERVED
    JSI - EN - 05- 3B - 001 Date Feb 1st, 2005
    Total Pages 2 P re s e n t P a g e 2
    Written by IL KYU, AN Approved by IN JAE, HWANG
    Subject M55 main cylinder
    ② Check the extra electric-proximity switch port
    In case of J011500(M55 main cylinder, Φ140/Φ80×2100), additionally
    2 of ports for the electric sensing switch are installed and plugged.
    J011600C(M37 main cylinder, Φ130/Φ80×2100) does not have those
    ports on the cylinder.

    Fig. 2 Extra sensing ports(rod side) Fig. 3 Extra sensing ports(piston side)

    ■ Theoretical pumping strokes and output volume


    (Efficiency = 0.95)

    Main pump displ. PTO Gear Strokes Maximum


    Main cylinder RPM Remark
    per revolution Ratio per min. output

    M37 250cc/rev Φ130/Φ80×2100 1.07(RB950) 1950 30 150m3/H

    1800 33 170m3/H
    M55 190×2cc/rev Φ140/Φ80×2100 1.07(RB962)
    1950 36 185m3/H

    ※ The transmission gear ratio should be 1:1.(pump input speed)


    ※ An excel file which automatically calculates the theoretical output
    volume can be obtained by request.

    JUNJIN HEAVY INDUSTRY SERVICE DEPARTMENT 428-1 Doosung-ri Maengdong-Myun Eumsung-Gun Chungbuk, Korea
    Tel : (+82)43 877-3023    Fax : (+82)43 882-3023 E-MAIL : [email protected]
    ⓒ COPYRIGHT 2005 JUNJIN HEAVY INDUSTRY CO., LTD. ALL RIGHTS RESERVED

    You might also like