Technische Dokumentation

Technical Documentation

XOMOX Ball Valves

Type KVA / KVL / KVK

XOMOX International GmbH & Co. OHG Doc. Nr.: tdb_mbv_gb

Von-Behring-Straße 15
D-88131 Lindau / Deutschland Januar 2008
 XOMOX ball valve, metal seated
Type KVA – SME / EME
DN 15 – 50 / 150 Lbs

Design features
 High quality investment casting body
 Ref. ASME B16.34
 Face to face acc. ASME B16.10 long
 Pressure class: 150Lbs
 Full port
 Anti blow out S2-stem, TA-Luft approved
 DIN ISO 5211 for actuator assembly

Part list
Pos. Part description Qty Type KVA-SME Type KVA-EME

1 Body 1 A216 WCB (1.0619) A351 CF8M (1.4408)

2 Tail 1 A216 WCB (1.0619) A351 CF8M (1.4408)
3 Ball 1 A351 CF8M (1.4408)boronized A351 CF8M (1.4408)boronized
4 Stem 1 17-4PH 17-4PH
5 Pressure gland 1 SS 316 (1.4401) SS 316 (1.4401)
6 Stop pin 1 1.4301 1.4301
7 Seats 2 SS316 (1.4571) boronized SS316 (1.4571) boronized
7.1 Seat support 2 Graphite Graphite
8 Spherical seal 1 Graphite Graphite
9 Stem packing 1 Graphite Graphite
10 Body gasket 1 Graphite Graphite
11 Lock plate 1 1.4301 1.4301
13 Lever with plastic cover 1 1.4308 1.4308
14 Hexagon nut 2 Gr. 8 Gr. 8
15 Belleville washer 2 1.4310 1.4310
17 Antistatic 1 1.4310 1.4310
18 Bolts 4 B8 B8

Dimensions in mm

DN L ØD ØK B LK d H H1 L1 DIN ISO Weight Max. torque on Shaft*

5211 (kg)
15 108 88,9 35 11.2 60.5 16 83 58 135 F04 1.6 47NM
20 117 98,6 43 11.2 70 16 86 61 135 F04 2.5 47NM
25 127 108 51 11.2 79.5 16 98 73 165 F05 3.1 85NM
40 165 127 73 14.2 98.5 16 119 90 200 F07 5.7 185NM
50 178 152 92 15.9 120.5 19 128 99 200 F07 8.2 185NM

* Incl. 25% Safety

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 2 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 XOMOX ball valve, metal seated
Type KVA – SME / EME
DN 15 – 50 / 300 Lbs

Design features
 High quality investment casting body
 Ref. ASME B16.34
 Face to face acc. ASME B16.10 long
 Pressure class: 300Lbs
 Full port
 Anti blow out S2-stem, TA-Luft approved
 DIN ISO 5211 for actuator assembly

Part list
Pos. Part description Qty Type KVA-SME Type KVA-EME

1 Body 1 A216 WCB (1.0619) A351 CF8M (1.4408)

2 Tail 1 A216 WCB (1.0619) A351 CF8M (1.4408)
3 Ball 1 A351 CF8M (1.4408)boronized A351 CF8M (1.4408) boronized
4 Stem 1 17-4PH 17-4PH
5 Pressure gland 1 SS 316 (1.4401) SS 316 (1.4401)
6 Stop pin 1 1.4301 1.4301
7 Seats 2 SS316 (1.4571) boronized SS316 (1.4571) boronized
7.1 Seat support 2 Graphite Graphite
8 Spherical seal 1 Graphite Graphite
9 Stem packing 1 Graphite Graphite
10 Body gasket 1 Graphite Graphite
11 Lock plate 1 1.4301 1.4301
13 Lever with plastic cover 1 1.4308 1.4308
14 Hexagon nut 2 Gr. 8 Gr. 8
15 Belleville washer 2 1.4310 1.4310
17 Antistatic 1 1.4310 1.4310
18 Bolts 4 B8 B8

Dimensions in mm
DN L ØD ØK B LK d H H1 L1 DIN ISO Weight Max. torque on
5211 (kg) Shaft*
15 140 95 35.1 14.3 66.5 14.3 82 58 135 F04 3 47NM
20 152 117 42.9 15.9 82.5 15.9 86 61 135 F04 3,8 47NM
25 165 124 50.8 17.5 89 17.5 98 73 165 F05 4,3 85NM
40 190 156 73 20.7 114.5 20.7 119 90 200 F07 8,3 185NM
50 216 165 92 22.3 127 22.3 128 99 200 F07 11 185NM

* Inkl. 25% Safety

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 3 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 XOMOX ball valve, metal seated
Type KVA – SME / EME
DN 65 – 100 / 150 Lbs

Flanschbild D100

Design features
 High quality investment casting body
 Ref. ASME B16.34
 Face to face acc. ASME B16.10 long
 Pressure class: 150Lbs
 Full port
 Anti blow out S2-stem, TA-Luft approved
 DIN ISO 5211 for actuator assembly

Part list
Pos. Part description Qty Type KVA-SME Type KVA-EME

1 Body 1 A216 WCB (1.0619) A351 CF8M (1.4408)

2 Tail 1 A216 WCB (1.0619) A351 CF8M (1.4408)
3 Ball 1 A351 CF8M A351 CF8M (1.4408)boronized
(1.4408)boronized
4 Stem 1 17-4PH 17-4PH
5 Pressure gland 1 SS 316 (1.4401) SS 316 (1.4401)
6 Stop pin 1 1.4301 1.4301
7 Seats 2 SS316 (1.4571) boronized SS316 (1.4571) boronized
7.1 Seat support 2 Graphite Graphite
8 Spherical seal 1 Graphite Graphite
9 Stem packing 2 Graphite Graphite
10 Body gasket 1 Graphite Graphite
11 Lock plate 1 1.4301 1.4301
13 Lever with plastic cover 1 1.4308 1.4308
14 Hexagon nut 1 Gr. 8 Gr. 8
15 Belleville washer 2 1.4310 1.4310
17 Antistatic 1 1.4310 1.4310
18 Hexagon nut 6 (8)* Gr. 8 Gr. 8
19 Stud bolts 6 (8)* B8 B8

*DN100 8-pcs.

Dimensions in mm
DN L ØD ØK B LK d H H1 L1 DIN ISO Weight Max. torque on
5211 (kg) Shaft*
65 190 177.8 104.6 17.5 139.7 19 16 133 250 F10 15 715NM
80 203 190.5 127 19.1 152.4 19 172 144 250 F10 20 770NM
100 229 228.6 157.2 23.9 190.5 19 197 400 228.6 F10 30 1085NM

* Incl. 25% Safety

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 4 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 XOMOX ball valve, metal seated
Type KVA – SME / EME
DN 65 – 100 / 300 Lbs

Design features
 High quality investment casting body
 Ref. ASME B16.34
 Face to face acc. ASME B16.10 long
 Pressure class: 300Lbs
 Full port
 Anti blow out S2-stem, TA-Luft approved
 DIN ISO 5211 for actuator assembly

Part description
Pos. Part description Qty Type KVA-SME Type KVA-EME

1 Body 1 A216 WCB (1.0619) A351 CF8M (1.4408)

2 Tail 1 A216 WCB (1.0619) A351 CF8M (1.4408)
3 Ball 1 A351 CF8M A351 CF8M (1.4408)boronized
(1.4408)boronized
4 Stem 1 SS 316 (1.4401) SS 316 (1.4401)
5 Pressure gland 1 SS 316 (1.4401) SS 316 (1.4401)
6 Stop pin 1 1.4301 1.4301
7 Seats 2 SS316 (1.4571) boronized SS316 (1.4571) boronized
7.1 Seat support 2 Graphite Graphite
8 Spherical seal 1 Graphite Graphite
9 Stem packing 2 Graphite Graphite
10 Body gasket 1 Graphite Graphite
11 Lock plate 1 1.4301 1.4301
13 Lever with plastic cover 1 1.4308 1.4308
14 Hexagon nut 1 Gr. 8 Gr. 8
15 Belleville washer 2 1.4310 1.4310
17 Antistatic 1 1.4310 1.4310
18 Hexagon nut 6 (8)* Gr. 8 Gr. 8
19 Stud bolts 6 (8)* B8 B8

*DN80 & DN100 8-pcs.

Dimensions in mm
DN L ØD ØK B LK d H H1 L1 DIN ISO Weight Max. torque on
5211 (kg) Shaft*
65 241 190 104.6 25.4 149 22 16 133 250 F10 19 715NM
80 283 210 127 28.6 168 22 172 144 250 F10 26 770NM
100 305 254 157.2 31.8 200 22 197 400 228.6 F10 41 1085NM
*
Incl. 25% Safety

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 5 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 XOMOX ball valve, soft seated
Type KVA – STE / ETE
DN 15 – 50 / 150 Lbs

Design features
 High quality investment casting body
 Ref. ASME B16.34
 Face to face acc. ASME B16.10 long
 Pressure class: 150Lbs
 Full port
 Anti blow out S2-stem, TA-Luft approved
 DIN ISO 5211 for actuator assembly

Part list
Pos. Part description Qty Type KVA-STE Type KVA-ETE

1 Body 1 A216 WCB (1.0619) A351 CF8M (1.4408)

2 Tail 1 A216 WCB (1.0619) A351 CF8M (1.4408)
3 Ball 1 A351 CF8M (1.4408) A351 CF8M (1.4408)
4 Stem 1 SS 316 (1.4401) SS 316 (1.4401)
5 Pressure gland 1 SS 316 (1.4401) SS 316 (1.4401)
6 Stop pin 1 1.4301 1.4301
7 Seats 2 PTFE PTFE
8 Spherical seal 1 PTFE PTFE
9 Stem packing 1 PTFE PTFE
10 Body gasket 1 PTFE PTFE
11 Lock plate 1 1.4301 1.4301
13 Lever with plastic cover 1 1.4308 1.4308
14 Hexagon nut 2 Gr. 8 Gr. 8
15 Belleville washer 2 1.4310 1.4310
17 Antistatic 1 1.4310 1.4310
18 Bolts 4 B8 B8

Dimensions in mm

DN L ØD ØK B LK d H H1 L1 DIN ISO Weight Max. torque on

5211 (kg) Shaft*
15 108 88.9 35 11.2 60.5 16 83 58 135 F04 1.6 13NM
20 117 98.6 43 11.2 70 16 86 61 135 F04 2.5 13NM
25 127 108 51 11.2 79.5 16 98 73 165 F05 3.1 23NM
40 165 127 73 14.2 98.5 16 119 90 200 F07 5.7 48NM
50 178 152 92 15.9 120.5 19 128 99 200 F07 8.2 48NM

* Incl. 25% Safety

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 6 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 XOMOX ball valve, soft seated
Type KVA – STE / ETE
DN 15 – 50 / 300 Lbs

Design features
 High quality investment casting body
 Ref. ASME B16.34
 Face to face acc. ASME B16.10 long
 Pressure class: 300Lbs
 Full port
 Anti blow out S2-stem, TA-Luft approved
 DIN ISO 5211 for actuator assembly

Part list
Pos. Part description Qty Type KVA-STE Type KVA-ETE

1 Body 1 A216 WCB (1.0619) A351 CF8M (1.4408)

2 Tail 1 A216 WCB (1.0619) A351 CF8M (1.4408)
3 Ball 1 A351 CF8M (1.4408) A351 CF8M (1.4408)
4 Stem 1 SS 316 (1.4401) SS 316 (1.4401)
5 Pressure gland 1 SS 316 (1.4401) SS 316 (1.4401)
6 Stop pin 1 1.4301 1.4301
7 Seats 2 PTFE PTFE
8 Spherical seal 1 PTFE PTFE
9 Stem packing 1 PTFE PTFE
10 Body gasket 1 PTFE PTFE
11 Lock plate 1 1.4301 1.4301
13 Lever with plastic cover 1 1.4308 1.4308
14 Hexagon nut 2 Gr. 8 Gr. 8
15 Belleville washer 2 1.4310 1.4310
17 Antistatic 1 1.4310 1.4310
18 Bolts 4 B8 B8

Dimensions in mm

DN L ØD ØK B LK d H H1 L1 DIN ISO Weight Max. torque on

5211 (kg) Shaft*
15 140 95 35.1 14.3 66.5 14.3 83 58 135 F04 3 13NM
20 152 117 42.9 15.9 82.5 15.9 86 61 135 F04 3.8 13NM
25 165 124 50.8 17.5 89 17.5 98 73 165 F05 4.3 23NM
40 190 156 73 20.7 114.5 20.7 119 90 200 F07 8.3 48NM
50 216 165 92 22.3 127 22.3 128 99 200 F07 11 48NM

* Incl. 25% Safety

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 7 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 XOMOX ball valve, soft seated
Type KVA – STE / ETE
DN 65 – 100 / 150 Lbs

Flanschbild DN65, DN80

Design features
 High quality investment casting body
 Ref. ASME B16.34
 Face to face acc. ASME B16.10 long
 Pressure class: 150Lbs
 Full port
 Anti blow out S2-stem, TA-Luft approved
 DIN ISO 5211 for actuator assembly

Flanschbild DN 100

Part list
Pos. Part description Qty Type KVA-STE Type KVA-ETE

1 Body 1 A216 WCB (1.0619) A351 CF8M (1.4408)

2 Tail 1 A216 WCB (1.0619) A351 CF8M (1.4408)
3 Ball 1 A351 CF8M (1.4408) A351 CF8M (1.4408)
4 Stem 1 SS 316 (1.4401) SS 316 (1.4401)
5 Pressure gland 1 SS 316 (1.4401) SS 316 (1.4401)
6 Stop pin 1 1.4301 1.4301
7 Seats 2 PTFE PTFE
8 Spherical seal 1 PTFE PTFE
9 Stem packing 1 PTFE PTFE
10 Body gasket 1 PTFE PTFE
11 Lock plate 1 1.4301 1.4301
13 Lever with plastic cover 1 1.4308 1.4308
14 Hexagon nut 2 Gr. 8 Gr. 8
15 Belleville washer 2 1.4310 1.4310
17 Antistatic 1 1.4310 1.4310
18 Hexagon nut 6 (8)* Gr. 8 Gr. 8
19 Bolts 6 (8)* B8 B8

* DN100 8-pcs.

Dimensions in mm

DN L ØD ØK B LK d H H1 L1 DIN ISO Weight Max. torque on

5211 (kg) Shaft*
65 190 177.8 104.6 17.5 139.7 19 16 133 250 F10 15 185NM
80 203 190.5 127.0 19.1 152.4 19 172 144 250 F10 20 200NM
100 229 228.6 157.2 23.9 190.5 19 197 400 228.6 F10 30 282NM

* Incl. 25% Safety

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 8 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 XOMOX ball valve, soft seated
Type KVA – STE / ETE
DN 65 – 100 / 300 Lbs

Design features
 High quality investment casting body
 Ref. ASME B16.34
 Face to face acc. ASME B16.10 long
 Pressure class: 300Lbs
 Full port
 Anti blow out S2-stem, TA-Luft approved
 DIN ISO 5211 for actuator assembly

Part list
Pos. Teilebezeichnung Anzahl Typ KVA-STE Typ KVA-ETE

1 Body 1 A216 WCB (1.0619) A351 CF8M (1.4408)

2 Tail 1 A216 WCB (1.0619) A351 CF8M (1.4408)
3 Ball 1 A351 CF8M (1.4408) A351 CF8M (1.4408)
4 Stem 1 SS 316 (1.4401) SS 316 (1.4401)
5 Pressure gland 1 SS 316 (1.4401) SS 316 (1.4401)
6 Stop pin 1 1.4301 1.4301
7 Seats 2 PTFE PTFE
8 Spherical seal 1 PTFE PTFE
9 Stem packing 1 PTFE PTFE
10 Body gasket 1 PTFE PTFE
11 Lock plate 1 1.4301 1.4301
13 Lever with plastic cover 1 1.4308 1.4308
14 Hexagon nut 2 Gr. 8 Gr. 8
15 Belleville washer 2 1.4310 1.4310
17 Antistatic 1 1.4310 1.4310
18 Hexagon nut 6 (8)* Gr. 8 Gr. 8
19 Bolts 6 (8)* B8 B8

* DN80 & DN100 8-pcs.

Dimensions in mm
DN L ØD ØK B LK d H H1 L1 DIN ISO Weight Max. torque on Shaft*
5211 (kg)
65 241 190 104.6 25.4 149 22 16 133 250 F10 19 185NM
80 283 210 127 28.6 168 22 172 144 250 F10 26 200NM
100 305 254 157.2 31.8 200 22 197 400 228.6 F10 41 282NM

* Incl. 25% Safety

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 9 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 XOMOX ball valve, metal seated
Type KVK – SME / EME
DN 15 – 50 / PN 10 - 40

Design features
 High quality investment casting body
 Face to face acc. DIN EN 558-1 row 14 (old F4)
 Pressure class: PN 10 -40
 Full port
 Anti blow out S2-stem, TA-Luft approved
 DIN ISO 5211 for actuator assembly

Part list
Pos. Part description Qty Type KVK-SME Type KVK-EME

1 Body 1 1.0619 1.4408

2 Tail 1 1.0619 1.4408
3 Ball 1 1.4408 boronized 1.4408 boronized
4 Stem 1 17-4 PH 17-4 PH
5 Pressure gland 1 1.4401 1.4401
6 Stop pin 1 1.4301 1.4301
7 Seats 2 1.4571 boronized 1.4571 boronized
7.1 Seat support 2 Graphit Graphit
8 Spherical seal 1 Graphit Graphit
9 Stem packing 1 Graphit Graphit
10 Body gasket 1 Graphit Graphit
11 Lock plate 1 1.4301 1.4301
13 Lever with plastic cover 1 1.4308 1.4308
14 Hexagon nut 2 A2-70 A2-70
15 Belleville washer 2 1.4310 1.4310
17 Antistatic 1 1.4310 1.4310
18 Bolts 4 A2-70 A2-70

Dimensions in mm
DN L ØD ØK B LK d H H1 L1 DIN ISO Weight Max. torque on Shaft*
5211 (kg)
15 115 95 45 16 65 14 83 58 131 F04 2.2 47NM
20 120 105 58 16 75 14 86 61 131 F04 2.8 47NM
25 125 115 68 18 85 14 100 74 166 F05 4.3 85NM
32 130 140 78 18 100 18 104 77 166 F05 5.3 85NM
40 140 150 88 18 110 18 117 90 201 F07 5.2 185NM
50 150 165 102 20 125 18 126 99 201 F07 9.3 185NM

* Incl. 25% Safety

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 10 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 XOMOX ball valve, metal seated
Type KVK – SME / EME
DN 65 – 100 / PN 10 - 16

Design features
 High quality investment casting body
 Face to face acc. DIN EN 558-1 row 14 (old F4)
 Pressure class: PN 10 -16
 Full port
 Anti blow out S2-stem, TA-Luft approved
DIN ISO 5211 for actuator assembly

Part list
Pos. Part description Qty Type KVK-SME Type KVK-EME

1 Body 1 1.0619 1.4408

2 Tail 1 1.0619 1.4408
3 Ball 1 1.4408 boronized 1.4408 boronized
4 Stem 1 17-4 PH 17-4 PH
5 Pressure gland 1 1.4401 1.4401
6 Stop pin 1 1.4301 1.4301
7 Seats 2 1.4571 boronized 1.4571 boronized
7.1 Seat support 2 Graphite Graphite
8 Spherical seal 1 Graphite Graphite
9 Stem packing 2 Graphite Graphite
10 Body gasket 1 Graphite Graphite
11 Lock plate 1 1.4301 1.4301
13 Lever with plastic cover 1 1.4308 1.4308
14 Hexagon nut 1 A2-70 A2-70
15 Belleville washer 2 1.4310 1.4310
17 Antistatic 1 1.4310 1.4310
18 Hexagon nut 6 (8)* A2-70 A2-70
19 Stud bolt 6 (8)* A2-70 A2-70

*DN100 8-pcs

Dimensions in mm
DN L ØD ØK B LK d H H1 L1 DIN ISO Weight Max. torque on Shaft*
5211 (kg)
65 170 185 122 18 145 18 161 133 251 F10 15 715NM
80 180 200 138 20 160 18 174 146 251 F10 20 770NM
100 190 220 158 20 180 18 215 -- 400 F10 29 1085NM

* Incl. 25% safety

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 11 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 XOMOX ball valve, metal seated
Type KVK – SME / EME
DN 65 – 100 / PN 25 - 40

Design features
 High quality investment casting body
 Face to face acc. DIN EN 558-1 row 14 (old F4)
 Pressure class: PN 25 -40
 Full port
 Anti blow out S2-stem, TA-Luft approved
 DIN ISO 5211 for actuator assembly

Part list
Pos. Part description Qty Type KVK-SME Type KVK-EME

1 Body 1 1.0619 1.4408

2 Tail 1 1.0619 1.4408
3 Ball 1 1.4408 boronized 1.4408 boronized
4 Stem 1 17-4 PH 17-4 PH
5 Pressure gland 1 1.4401 1.4401
6 Stop pin 1 1.4301 1.4301
7 Seats 2 1.4571 boronized 1.4571 boronized
7.1 Seat support 2 Graphite Graphite
8 Spherical seal 1 Graphite Graphite
9 Stem packing 2 Graphite Graphite
10 Body gasket 1 Graphite Graphite
11 Lock plate 1 1.4301 1.4301
13 Lever with plastic cover 1 1.4308 1.4308
14 Hexagon nut 1 A2-70 A2-70
15 Belleville washer 2 1.4310 1.4310
17 Antistatic 1 1.4310 1.4310
18 Hexagon nut 6 (8)* A2-70 A2-70
19 Stud bolt 6 (8)* A2-70 A2-70

*DN80 & DN100 8-pcs.

Dimensions in mm
DN L ØD ØK B LK d H H1 L1 DIN ISO Weight Max. torque on Shaft*
5211 (kg)
65 170 185 122 22 145 18 161 133 251 F10 16 715NM
80 180 200 138 24 160 18 174 146 251 F10 21 770NM
100 190 220 162 24 190 18 215 -- 400 F10 31 1085NM

* Incl. 25% Safety

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 12 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 XOMOX ball valve, soft seated
Type KVK – STE / ETE
DN 15 – 50 / PN 10 - 40

Design features
 High quality investment casting body
 Face to face acc. DIN EN 558-1 row 14 (old F4)
 Pressure class: PN 10 -40
 Full port
 Anti blow out S2-stem, TA-Luft approved
 DIN ISO 5211 for actuator assembly

Part list
Pos. Part description Qty Type KVK-STE Type KVK-ETE

1 Body 1 1.0619 1.4408

2 Tail 1 1.0619 1.4408
3 Ball 1 1.4408 1.4408
4 Stem 1 1.4401 1.4401
5 Pressure gland 1 1.4401 1.4401
6 Stop pin 1 1.4301 1.4301
7 Seats 2 PTFE PTFE
8 Spherical seal 1 PTFE PTFE
9 Stem packing 1 PTFE PTFE
10 Body gasket 1 PTFE PTFE
11 Lock plate 1 1.4301 1.4301
13 Lever with plastic cover 1 1.4308 1.4308
14 Hexagon nut 2 A2-70 A2-70
15 Belleville washer 2 1.4310 1.4310
17 Antistatic 1 1.4310 1.4310
18 Bolts 4 A2-70 A2-70

Dimensions in mm
DN L ØD ØK B LK d H H1 L1 DIN ISO Weight Max. torque on Shaft*
5211 (kg)
15 115 95 45 16 65 14 83 58 131 F04 2.2 13NM
20 120 105 58 16 75 14 86 61 131 F04 2.8 13NM
25 125 115 68 18 85 14 100 74 166 F05 4.3 23NM
32 130 140 78 18 100 18 104 77 166 F05 5.3 23NM
40 140 150 88 18 110 18 117 90 201 F07 5.2 48NM
50 150 165 102 20 125 18 126 99 201 F07 9.3 48NM

* Incl. 25% Safety

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 13 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 XOMOX ball valve, soft seated
Type KVK – STE / ETE
DN 65 – 100 / PN 10 - 16

Design features
 High quality investment casting body
 Face to face acc. DIN EN 558-1 row 14 (old F4)
 Pressure class: PN 10 -16
 Full port
 Anti blow out S2-stem, TA-Luft approved
 DIN ISO 5211 for actuator assembly

Part list
Pos. Part description Qty Type KVK-STE Type KVK-ETE

1 Body 1 1.0619 1.4408

2 Tail 1 1.0619 1.4408
3 Ball 1 1.4408 1.4408
4 Stem 1 1.4401 1.4401
5 Pressure gland 1 1.4401 1.4401
6 Stop pin 1 1.4301 1.4301
7 Seats 2 PTFE PTFE
8 Spherical seal 1 PTFE PTFE
9 Stem packing 1 PTFE PTFE
10 Body gasket 1 PTFE PTFE
11 Lock plate 1 1.4301 1.4301
13 Lever with plastic cover 1 1.4308 1.4308
14 Hexagon nut 2 A2-70 A2-70
15 Belleville washer 2 1.4310 1.4310
17 Antistatic 1 1.4310 1.4310
18 Hexagon nut 6 (8)* A2-70 A2-70
19 Stud bolt 6 (8)* A2-70 A2-70

* DN100 8-pcs.

Dimensions in mm
DN L ØD ØK B LK d H H1 L1 DIN ISO Weight Max. torque on
5211 (kg) Shaft*
65 170 185 122 18 145 18 161 133 251 F10 15 185NM
80 180 200 138 20 160 18 174 146 251 F10 20 200NM
100 190 220 158 20 180 18 215 -- 400 F10 29 282NM

* Incl. 25% Safety

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 14 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 XOMOX ball valve, soft seated
Type KVK – STE / ETE
DN 65 – 100 / PN 25 – 40

Design features
 High quality investment casting body
 Face to face acc. DIN EN 558-1 row 14 (old F4)
 Pressure class: PN 25 -40
 Full port
 Anti blow out S2-stem, TA-Luft approved
 DIN ISO 5211 for actuator assembly

Part list
Pos. Part description Qty Type KVK-STE Type KVK-ETE

1 Body 1 1.0619 1.4408

2 Tail 1 1.0619 1.4408
3 Ball 1 1.4408 1.4408
4 Stem 1 1.4401 1.4401
5 Pressure gland 1 1.4401 1.4401
6 Stop pin 1 1.4301 1.4301
7 Seats 2 PTFE PTFE
8 Spherical seal 1 PTFE PTFE
9 Stem packing 1 PTFE PTFE
10 Body gasket 1 PTFE PTFE
11 Lock plate 1 1.4301 1.4301
13 Lever with plastic cover 1 1.4308 1.4308
14 Hexagon nut 2 A2-70 A2-70
15 Belleville washer 2 1.4310 1.4310
17 Antistatic 1 1.4310 1.4310
18 Hexagon nut 6 (8)* A2-70 A2-70
19 Stud bolt 6 (8)* A2-70 A2-70

* DN100 8-pcs.

Dimensions in mm
DN L ØD ØK B LK d H H1 L1 DIN ISO Weight Max. torque on Shaft*
5211 (kg)
65 170 185 122 22 145 22 161 133 251 F10 16 185NM
80 180 200 138 24 160 24 174 146 251 F10 21 200NM
100 190 220 158 24 190 24 215 -- 400 F10 31 282NM

* Incl. 25% Safety

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 15 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 XOMOX ball valve, metal seated
Type KVL – SME / EME
DN 15 – 50 / PN 10 - 40

Design features
 High quality investment casting body
 DIN ISO 5211 for actuator assembly
 Face to face acc. DIN EN 558-1 row 1 (old F1)
 Full port
 Pressure class: PN 10 -40
 Anti blow out S2-stem, TA-Luft approved

Part list
Pos. Part description Qty Type KVL-SME Type KVL-EME

1 Body 1 1.0619 1.4408

2 Tail 1 1.0619 1.4408
3 Ball 1 1.4408 boronized 1.4408 boronized
4 Stem 1 17-4 PH 17-4 PH
5 Pressure gland 1 1.4401 1.4401
6 Stop pin 1 1.4301 1.4301
7 Seats 2 1.4571 boronized 1.4571 boronized
7.1 Seat support 2 Graphite Graphite
8 Spherical seal 1 Graphite Graphite
9 Stem packing 1 Graphite Graphite
10 Body gasket 1 Graphite Graphite
11 Lock plate 1 1.4301 1.4301
13 Lever with plastic cover 1 1.4308 1.4308
14 Hexagon nut 2 A2-70 A2-70
15 Belleville washer 2 1.4310 1.4310
17 Antistatic 1 1.4310 1.4310
18 Bolts 4 A2-70 A2-70

Dimensions in mm
DN L ØD ØK B LK d H H1 L1 DIN ISO Weight Max. torque on Shaft*
5211 (kg)
15 130 95 45 16 65 14 83 58 131 F04 2.4 47NM
20 150 105 58 16 75 14 86 61 131 F04 3.0 47NM
25 160 115 68 18 85 14 100 74 166 F05 4.3 85NM
32 180 140 78 18 100 18 104 77 166 F05 6.0 85NM
40 200 150 88 18 110 18 117 90 201 F07 6.2 185NM
50 230 165 102 20 125 18 126 99 201 F07 10.0 185NM

* Incl. 25% Safety

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 16 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 XOMOX ball valve, metal seated
Type KVL – SME / EME
DN 65 – 100 / PN 10 – 16

Design features
 High quality investment casting body
 DIN ISO 5211 for actuator assembly
 Face to face acc. DIN EN 558-1 row 1 (old F1)
 Full port
 Pressure class: PN 10 -16
 Anti blow out S2-stem, TA-Luft approved

Part list
Pos. Part description Qty Type KVL-SME Type KVL-EME

1 Body 1 1.0619 1.4408

2 Tail 1 1.0619 1.4408
3 Ball 1 1.4408 boronized 1.4408 boronized
4 Stem 1 17-4 PH 17-4 PH
5 Pressure gland 1 1.4401 1.4401
6 Stop pin 1 1.4301 1.4301
7 Seats 2 1.4571 boronized 1.4571 boronized
7.1 Seat support 2 Graphite Graphite
8 Spherical seal 1 Graphite Graphite
9 Stem packing 2 Graphite Graphite
10 Body gasket 1 Graphite Graphite
11 Lock plate 1 1.4301 1.4301
13 Lever with plastic cover 1 1.4308 1.4308
14 Hexagon nut 1 A2-70 A2-70
15 Belleville washer 2 1.4310 1.4310
17 Antistatic 1 1.4310 1.4310
18 Hexagon nut 6 (8)* A2-70 A2-70
19 Stud bolt 6 (8)* A2-70 A2-70

*DN100 8-pcs.

Dimensions in mm
DN L ØD ØK B LK d H H1 L1 D1 DIN ISO Weight Max. torque on
5211 (kg) Shaft*
65 290 185 122 18 145 18 161 133 251 22,2 F10 16 715NM
80 310 200 138 20 160 18 174 146 251 22,2 F10 21 770NM
100 350 220 158 20 180 18 215 -- 400 28,6 F10 31 1085NM

* Incl. 25% safety

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 17 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 XOMOX ball valve, metal seated
Type KVL – SME / EME
DN 65 – 100 / PN 25 – 40

Design features
 High quality investment casting body
 Face to face acc. DIN EN 558-1 row 1 (old F1)
 Pressure class: PN 25 -40
 Full port
 Anti blow out S2-stem, TA-Luft approved
 DIN ISO 5211 for actuator assembly

Part list
Pos. Part description Qty Type KVL-SME Type KVL-EME

1 Body 1 1.0619 1.4408

2 Tail 1 1.0619 1.4408
3 Ball 1 1.4408 boronized 1.4408 boronized
4 Stem 1 17-4 PH 17-4 PH
5 Pressure gland 1 1.4401 1.4401
6 Stop pin 1 1.4301 1.4301
7 Seats 2 1.4571 boronized 1.4571 boronized
7.1 Seat support 2 Graphite Graphite
8 Spherical seal 1 Graphite Graphite
9 Stem packing 2 Graphite Graphite
10 Body gasket 1 Graphite Graphite
11 Lock plate 1 1.4301 1.4301
13 Lever with plastic cover 1 1.4308 1.4308
14 Hexagon nut 1 A2-70 A2-70
15 Belleville washer 2 1.4310 1.4310
17 Antistatic 1 1.4310 1.4310
18 Hexagon nut 6 (8)* A2-70 A2-70
19 Stud bolt 6 (8)* A2-70 A2-70

*DN80 & DN100 8-pcs.

Dimensions in mm
DN L ØD ØK B LK d H H1 L1 DIN ISO Weight Max. torque on Shaft*
5211 (kg)
65 290 185 122 22 145 18 161 133 251 F10 18 715NM
80 310 200 138 24 160 18 174 146 251 F10 25 770NM
100 350 220 162 24 190 18 215 -- 400 F10 37 1085NM

* Incl. 25% Safety

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 18 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 XOMOX ball valve, soft seated
Type KVL – STE / ETE
DN 15 – 50 / PN 10 - 40

Design features
 High quality investment casting body
 Face to face acc. DIN EN 558-1 row 1 (old F1)
 Pressure class: PN 10 -40
 Full port
 Anti blow out S2-stem, TA-Luft approved
 DIN ISO 5211 for actuator assembly

Part list
Pos. Part description Qty Type KVL-STE Type KVL-ETE

1 Body 1 1.0619 1.4408

2 Tail 1 1.0619 1.4408
3 Ball 1 1.4408 1.4408
4 Stem 1 1.4401 1.4401
5 Pressure gland 1 1.4401 1.4401
6 Stop pin 1 1.4301 1.4301
7 Seats 2 PTFE PTFE
8 Spherical seal 1 PTFE PTFE
9 Stem packing 1 PTFE PTFE
10 Body gasket 1 PTFE PTFE
11 Lock plate 1 1.4301 1.4301
13 Lever with plastic cover 1 1.4308 1.4308
14 Hexagon nut 2 A2-70 A2-70
15 Belleville washer 2 1.4310 1.4310
17 Antistatic 1 1.4310 1.4310
18 Bolts 4 A2-70 A2-70

Dimensions in mm
DN L ØD ØK B LK d H H1 L1 DIN ISO Weight Max. torque on Shaft*
5211 (kg)
15 130 95 45 16 65 14 83 58 131 F04 2.4 13NM
20 150 105 58 16 75 14 86 61 131 F04 3.0 13NM
25 160 115 68 18 85 14 100 74 166 F05 4.3 23NM
32 180 140 78 18 100 18 104 77 166 F05 6.0 23NM
40 200 150 88 18 110 18 117 90 201 F07 6.2 48NM
50 230 165 102 20 125 18 126 99 201 F07 10.0 48NM

* Incl. 25% Safety

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 19 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 XOMOX ball valve, soft seated
Type KVL – STE / ETE
DN 65 – 100 / PN 10 - 16

Design feature
 High quality investment casting body
 Face to face acc. DIN EN 558-1 row 1 (old F1)
 Pressure class: PN 10 -16
 Full port
 Anti blow out S2-stem, TA-Luft approved
 DIN ISO 5211 for actuator assembly

Part list
Pos. Part description Qty Type KVL-STE Type KVL-ETE

1 Body 1 1.0619 1.4408

2 Tail 1 1.0619 1.4408
3 Ball 1 1.4408 1.4408
4 Stem 1 1.4401 1.4401
5 Pressure gland 1 1.4401 1.4401
6 Stop pin 1 1.4301 1.4301
7 Seats 2 PTFE PTFE
8 Spherical seal 1 PTFE PTFE
9 Stem packing 1 PTFE PTFE
10 Body gasket 1 PTFE PTFE
11 Lock plate 1 1.4301 1.4301
13 Lever with plastic cover 1 1.4308 1.4308
14 Hexagon nut 2 A2-70 A2-70
15 Belleville washer 2 1.4310 1.4310
17 Antistatic 1 1.4310 1.4310
18 Hexagon nut 6 (8)* A2-70 A2-70
19 Stud bolt 6 (8)* A2-70 A2-70

* DN100 8-pcs.

Dimensions in mm
DN L ØD ØK B LK d H H1 L1 DIN ISO Weight Max. torque on Shaft*
5211 (kg)
65 290 185 122 18 145 18 161 133 251 F10 16 185NM
80 310 200 138 20 160 18 174 146 251 F10 21 200NM
100 350 220 158 20 180 18 215 -- 400 F10 31 282NM

* Incl. 25% Safety

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 20 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 XOMOX ball valve, soft seated
Type KVL – STE / ETE
DN 65 – 100 / PN 25 - 40

Design features
 High quality investment casting body
 Face to face acc. DIN EN 558-1 row 1 (old F1)
 Pressure class: PN 25 -40
 Full port
 Anti blow out S2-stem, TA-Luft approved
 DIN ISO 5211 for actuator assembly

Part list
Pos. Part description Qty Type KVL-STE Type KVL-ETE

1 Body 1 1.0619 1.4408

2 Tail 1 1.0619 1.4408
3 Ball 1 1.4408 1.4408
4 Stem 1 1.4401 1.4401
5 Pressure gland 1 1.4401 1.4401
6 Stop pin 1 1.4301 1.4301
7 Seats 2 PTFE PTFE
8 Spherical seal 1 PTFE PTFE
9 Stem packing 1 PTFE PTFE
10 Body gasket 1 PTFE PTFE
11 Lock plate 1 1.4301 1.4301
13 Lever with plastic cover 1 1.4308 1.4308
14 Hexagon nut 2 A2-70 A2-70
15 Belleville washer 2 1.4310 1.4310
17 Antistatic 1 1.4310 1.4310
18 Hexagon nut 6 (8)* A2-70 A2-70
19 Stud bolt 6 (8)* A2-70 A2-70

* DN100 8-pcs.

Dimensions in mm
DN L ØD ØK B LK d H H1 L1 DIN ISO Weight Max. torque on Shaft*
5211 (kg)
65 290 185 122 22 145 22 161 133 251 F10 18 185NM
80 310 200 138 24 160 24 174 146 251 F10 25 200NM
100 350 220 158 24 190 24 215 -- 400 F10 37 282NM

* Incl. 25% Safety

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 21 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 Data for XOMOX ball valves
Stem extension with T-lever, mat. SS
For valve type KVK /KVL /KVA /KK1 /240-70

Dimension in mm
DN H1 L1
15 188 250
20 192 250
25 202 350
32 206 350
40 216 350
50 225 350
65 240 400
80 250 400
100 222 400

XOMOX ball valve

Stem extension AELC with SS housing
For valve type KVK /KVL /KVA /KK1 /240-70

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 22 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 Dimensions in mm
DN A B C D E F
15 50,0 88,5 137,5 132,5 135 120
20 50,0 92,0 141,0 136,0 135 120
25 74,5 126,0 173,5 168,5 165 160
32 74,5 130,0 177,5 172,5 165 160
40 74,5 140,0 192,5 195,5 200 200
50 74,5 149,0 201,5 204,5 200 200
65 125,5 215,0 288,0 292,5 250 400
80 125,5 225,0 298,0 292,5 250 400
100 125,5 212,5 --- 292,5 --- 500

XOMOX ball valve

ISO-Flange und stem head dimensions
For valve Type KVK /KVL /KVA /KK1 / 240-70

Dimensions in mm
DN SW S (LK) D1 H2 C G
15 6,3 42 9,7 11,2 18,0 38,5
20 6,3 42 9,7 11,5 17,5 42,0
25 8,0 50 11,2 12,0 20,0 51,5
32 8,0 50 11,2 12,0 20,0 55,5
40 9,5 70 16,0 14,0 23,5 65,5
50 9,5 70 16,0 14,0 23,5 74,5
65 17,0 102 22,3 22,4 41,5 90,0
80 17,0 102 22,3 19,0 41,5 99,9
100 17,0 102 28,6 26,0 47,5 122,

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 23 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 Tighten torque on body bolts & stem nut for assembly of
KVK – KVL - KVA

Valve Size Body bolts Stem nut

[mm] Thread size [NM] [NM]
DIN / ANSI
15 M8 / 5/16 19 7-9
20 M8 / 5/16 19 7-9
25 M10 / 3/8 39 10-12
32 M10 / 3/8 39 10-12
40 M12 / 1/2 66 14-17
50 M12 / 1/2 66 14-17
65 M12 / 1/2 66 21-24
80 M12 / 1/2 66 21-24
100 M12 / 1/2 66 33-35
100* M16 / 5/8 164 33-35

* For PN25-40 & ANSI 300

Tighten torque for 3-piece ball valves

240-50/70/80
Valve size Body Bolts Stem nut
[mm] Thread size [NM] [NM]

8-10 M6 8 6-7
15 M8 19 7-9
20 M8 19 7-9
25 M8 19 10-12
32 M10 39 10-12
40 M10 39 14-17
50 M10 39 14-17
50* M12 66 21-24
65 M12 66 21-24
80 M16 164 21-24
100 M16 164 33-35

* Series 80 only

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 24 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 FIRE SAFE X-Seal
Body gasket

Roughly pressed Fully pressed

Graphite outside ring+Metal ring+TFM- inside ring

Stem seal (spherical seal)

Metallic Delta ring + Teflon®

Design Benefits

 Fire-tested and chemical resistant sealing

No contact of graphite parts with flow media
 Maximum tightness to the atmosphere in operating condition
and fail case (fire, etc.)
 Low space requirements
 Cost-efficient solution

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 25 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 Lever with locking device

Standard for KVK / KVL / KVA / KK1 /240-70

1) SS304 lever
2) Plastic cover to protect the hand during operating
3) SS rivet to fix plastic cover on lever
4) SS lock plate
5) Casted rail for better guiding of lock plate
6) SS Spiral spring
7) Push the lock plate to delock bevor switching the valve.
8) Let the lock plate free to lock the valve.

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 26 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 Torques for XOMOX ball valves, metal seated

XOMOX Ball Valves , Classes 150, 300, 600, PN10-16 & 25-40
with floating ball and graphite supported seats
Valve Breakaway Torque Values - Torque Values, NM

Seat Material : 1.4571 (316) hard faced / Stem

Valve Size Packing : Graphite Max. allowable
Maximum Differential Pressure,
Full Port Bar (psi) torque on
68 83
14 20 27 35 40 50 (100 (120 100
6 (100) (200) (285) (400) (500) (600) (740) 0) 0) (1480) Stem 17-4PH
1/2" 17 18 19 20 21 23 61 NM
3/4" 25 25 27 30 32 35 61 NM
1" 35 40 42 45 48 50 110 NM
1 1/4" 40 45 50 55 60 60 110 NM
1-1/2" 60 70 75 80 85 90 240 NM
2" 75 85 92 100 115 130 240 NM
2 1/2" 120 170 185 200 230 280 930 NM
3" 180 250 290 320 1003 NM
4" 250 450 500 580 1413 NM

Notes

1) Torque values listed above are for clean / clear fluids only. See the torque influence factors below for other services.
2) Run torque values can be estimated to be 60% of the breakaway torque values.
3) Seating torque values can be estimated to be 90% of the breakaway torque values.

Influence Factors on Published Torques

1) Increase by 15% for dry gas.
2) Increase by 35% for fluids with solid or abrasive contents.
3) Increase by 50% for pneumatical transport of solid particles.

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 27 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008
 Torques for XOMOX ball valves, soft seated

XOMOX Ball Valves , Classes 150, 300, 600, PN10-16 & 25-40

Valve Breakaway Torque Values - Torque Values, NM

Seat Material : PTFE / Stem Packing :

Valve Size PTFE Max. allowable
Maximum Differential Pressure,
Full Port Bar (psi) torque on
14 20 27 35 40 50 68 83 100
6 (100) (200) (285) (400) (500) (600) (740) (1000) (1200) (1480) Stem 316
1/2" 7 7 7 7 7 7 7 7 7 7 16 NM
3/4" 9 9 9 9 9 9 9 10 10 11 16 NM
1" 15 15 15 15 15 15 15 15 15 15 29 NM
1 1/4" 18 18 18 18 18 19 20 22 24 29 NM
1-1/2" 27 27 27 27 28 31 34 38 43 62 NM
2" 35 40 43 45 48 50 53 62 NM
2 1/2" 62 68 70 65 72 80 90 240 NM
3" 85 90 102 115 124 140 150 260 NM
4" 150 170 200 220 240 250 280 366 NM

1) Torque values listed above are for clean / clear fluids only. See the torque influence factors below for other services.
2) Run torque values can be estimated to be 60% of the breakaway torque values.
3) Seating torque values can be estimated to be 90% of the breakaway torque values.

Influence Factors on Published Torques

1) Increase by 15% for dry gas.
2) Increase by 35% for fluids with solid or abrasive contents.
3) Increase by 20% for RPTFE-Seats (glas filled).
4) Increase by 25% for cerbon & SS filled seats.

Crane Co., and its subsidiaries cannot accept responsibility for possible errors in catalogues, brochures, other printed materials, and website
information. Crane Co. reserves the right to alter its products without notice, including products already on order provided that such alteration can
be made without changes being necessary in specifications already agreed. All their trademarks in this material are property of the Crane Co. or
its subsidiaries. The Crane and Crane brands logotype are registered trademarks of Crane Co. All rights reserved.

XOMOX International GmbH & Co.OHG Tel.: ++49(0)8382/702-0 Doc. Nr.: tdb_mbv_gb Seite 28 von 28
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved: H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: M. Evers Januar 2008