Raex 400: General Product Description

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Data sheet 2064 Raex 400 2017-04-20

Raex 400

General Product Description


 — Any time, any wear
Raex® offers a complete range of abrasion-resistant steels through SSAB’s Certified Partner network. With its dependable quality and reliable
performance, it delivers great value for all your typical wear applications.
High availability
Raex plate and strip are quickly available from our global Raex distribution network, enabling fast, effective production and less tied-up capital.
For custom specialized grades, Raex mill lead times are short and delivery is reliable for easy inventory planning and replenishment.
Complete product range
Available in thicknesses of 2-80 mm at 300-500 HB, Raex has got your every wear need covered. You can depend on Raex to help extend service
life, increase payload, optimize production and save costs. And Raex strip, made using modern technology and extensive quenched manufac-
turing processes, offers you more options and design possibilities.
Quality and performance you can rely on
Leaner production begins with reliable performance. Raex is made from carefully chosen raw materials in a tightly controlled, integrated steel
mill process. The result: reliable quality and performance hardness, bendability, surface quality and flatness – thus high performance for all your
typical wear applications.

Mechanical Properties
Product Thickness Width Length Hardness Typical yield Typical tensile Typical
(mm) (mm) (mm) (HBW) strength Rp0.2 strength Rm elongation A
(MPa) (MPa) (%)
Sheet 2.00- 8.00 1000- 1750 2000- 12000 360- 440 1100 1250 10
Plate 6.00- 40.00 1800- 3200 2000- 12000 360- 440 1100 1300 10
Plate 40.01- 60.00 2000- 2500 4000- 9500 360- 440 1100 1300 10
Plate 60.01- 80.00 2000- 2500 4000- 6900 360- 440 1100 1300 10
Brinell Hardness is measured, according to EN ISO 6506-1 on milled surface 0.3-3.0mm below surface. Hardness value is being announced in the material certifi-
cate. Mechanical properties are tested in transverse direction and tabulated for information only and values are not shown in material certificate.
 


Impact Properties
Product Typical impact energy, longitudinal test,
Charpy V 10x10 mm test specimen1)
Raex 400 30 J/-40 0C
1)
Impact testing according to EN ISO 148-1 is performed on thickness ≥6mm. The specific value corresponds to a full-size specimen. Impact values are tabulated
for information only and value are not shown in material certificate.

Chemical Composition (ladle analysis)


Product C Si Mn P S Cr Ni Mo B
(max %) (max %) (max %) (max %) (max %) (max %) (max %) (max %) (max %)
Plate 0.23 0.80 1.70 0.025 0.015 1.50 1.00 0.50 0.005
Sheet 0.16 0.50 1.60 0.025 0.010 1.20 1.00 0.25 0.005
The steel is grain refined.
 
Carbon Equivalent CET(CEV)
Thickness Sheet Plate Plate Plate
(mm) 2.00 - 8.00 6.00 - 20.00 20.01 - 32.00 32.01 - 80.00
Typ CET(CEV) 1) 2) 0.30 (0.48) 0.30 (0.44) 0.35 (0.53) 0.35 (0.57)
1)
The CET values are tabulated for information only.
2)
The CEV value is being announced in the inspection certificate.
 

Raex is produced at the SSAB


Plant in Raahe, Finland.
Data sheet 2064 Raex 400 2017-04-20

Tolerances
Thickness
Plates tolerances according to EN 10 029 Class A, tighter tolerances upon agreement. Sheets tolerances according to EN 10 051 Category A.
 
Length and Width
For plate tolerances according to EN 10 029, tighter tolerances upon agreement. Sheets tolerances according to EN 10 051.
 
Shape
For plate tolerances according to EN 10 029. For sheet tolerances according to EN 10 051
 
Flatness
For plate and sheet the flatness deviation is max 6 mm/m.
 
Surface Properties
According to EN 10 163-2 Class A, Subclass 3.
 
Bending
Minimum inner bending radii for a 90° bend, t ≤ 20 mm are:
Sheets and plates, 3 x t (transverse) and 4 x t (longitudinal).
 
Delivery Conditions
The delivery condition is quenched. Sheets are available in as rolled surface condition with mill edge. Plates are available in as-rolled or shop-
primed surface condition. Delivery requirements can be found in SSAB´s brochure at www.raexsteel.com.

Fabrication and Other Recommendations




 Welding, bending and machining recommendations can be found in brochures at www.raexsteel.com or consult Tech Support, techsupport@
ssab.com.

Raex 400 is not intended for further heat treatment. Mechanical properties are achieved by quenching. The properties of the delivery condi-
tion cannot be retained after exposure to temperatures in excess of 250°C.

Appropriate health and safety precautions must be taken when welding, cutting, grinding or otherwise working on this product. Grinding, espe-
cially of primer coated plates, may produce dust with a high particle concentration.
 

Contact information
www.raexsteel.com

The English version of this document shall prevail in case of discrepancy. Download the latest version of this document at www.raexsteel.com Raex is produced at the SSAB
Contact information: http://www.raexsteel.com/raex-contact Plant in Raahe, Finland.

You might also like