NetPerformer™ SDM 9220 - SDM 9230

Integrated Access Routers

Delivers the services you need, wherever you need.

Alleviates bandwidth constraints and maximizes quality of service
and reliability.
Supports multiple services.
Lowers capital expenditures and operating costs.

INDUSTRIAL AND GOVERNMENT INSTITUTIONS DEMAND SECURE AND RELIABLE NETWORKS EXPERIENCE THE POWER
TO ENSURE BOTH EMPLOYEE AND PUBLIC SAFETY. GEOGRAPHICALLY DISPERSED OFFICES THAT ARE OF NETWORK CONVERGENCE
VERY OFTEN LOCATED IN REMOTE, RUGGED AREAS AMPLIFY THE IMPORTANCE OF A PRIVATE WAN Memotec’s solution allows for
THAT FLAWLESSLY SUPPORTS MISSION-CRITICAL COMMUNICATIONS SERVICES WHILE maximum network performance
MAXIMIZING AVAILABLE BANDWIDTH. in low-bandwidth environments.
Supporting both analog and digital
BRI/PRI telephony channels, as well
SDM 9220 and 9230 In- With a range of interfaces choice for converged voice satellite technologies along
as multiple T1/E1 data interfaces
tegrated Access Routers to connect automation & data applications over with SkyPerformer®, our and serial data ports, NetPerformer
maximize network perfor- and metering equipment, satellite networks. Its satellite optimization so- is the solution to reduce network
mance and provide superior NetPerformer enables ability to support legacy lution. Carriers can operate infrastructure costs and simplify
convergence capabilities to deployment over copper, protocols and IP data a hybrid satellite/terrestrial WAN connections. It uses a unique
ensure efficient and secure fiber, microwave, and makes it ideal for topology over a single technology to packetize and
transport of multiple commu- satellite access infrastructure. Government, Military, Oil platform, reducing costs converge voice, data & video
nications services. & Gas, Industrial and Mul- and minimizing complexity. traffic onto a single network, and
MULTI-PROTOCOL then further compresses it to
tiservice VSAT applications.
Memotec’s field-proven SUPPORT AWARD-WINNING minimize bandwidth requirements
optimization techniques and reduce operating budget.
ENHANCED SATELLITE COMPRESSION
for voice, data and video NetPerformer’s leading All without sacrificing Quality of
ACCESS CAPABILITIES TECHNOLOGY Service (QoS) for both voice & data
communications, optimize compression technology,
as well as its multiplexing NetPerformer can be Memotec’s PowerCell® applications!
any application transmitted
through a private network. and prioritization capabili- deployed with SCPC, provides high-compression With up to 3 expansion slots,
ties, make it the product of TDMA, and IP broadband voice & data transport over NetPerformer protects your
any WAN infrastructure. investment, ensuring network
PowerCell QoS is combined scalability that matches your
expansion requirements.
with IP Precedence TOS
bit and 802.1p/q support
to provide end-to-end QoS. NETWORK
Users can define up MANAGEMENT
to eight classes of AND REPORTING
service with 16 different ACTView® 3000, an advanced
levels of prioritization NMS platform, enables the
to ensure that mission- user to virtually manage
critical applications always any other platform from
receive sufficient bandwidth. a single network station,
avoiding redundancies
in network management
and the costs associated
with multiple platforms.
 NetPerformer SDM 9220 NetPerformer SDM 9230
CAPACITY
Telephony channels Up to 8 FXS (1 REN max. per port), FXO or E&M or 8 ISDN BRI digital Up to 12 FXS (1 REN max. per port), FXO or E&M, 12 BRI or 120 T1/E1CAS/PRI
channels per unit digital channels per unit
Data channels Up to 3 serial data ports, or 1 serial and 4 T1 or E1 data interfaces Up to 3 serial data ports, or 1 serial and 6 T1 or E1 data interfaces
(up to 124 logical ports) (up to 124 logical ports)
LINK PORT
SPEED - Without compression: Up to 8 Mbps RX and 2 Mbps TX using serial port on - Without compression: Up to 8 Mbps using serial port on base unit, 2 Mbps
base unit, 2 Mbps for next two optional serial ports for next two optional serial ports
- With data compression: Up to 2.048 Mbps - With data compression: Up to 4.096 Mbps
ATM (optional license required) - Not Available - T1/E1 full or fractional, PowerCell over AAL5 UBR using up to 32 PVCs,
RFC1483 Multiprotocol Encapsulation over AAL5, RFC2364 PPP over AAL5,
FRF.8 Service Interworking, AAL0 transparent over PowerCell/IP
PHYSICAL
System Details - Auto-sensing power 100-240 VAC, 50/60 Hz, 65 watts maximum - Auto-sensing power 100-240 VAC, 50/60 Hz, 65 watts maximum
- -48 VDC - -48 VDC
- 1 serial port (user or link), DTE or DCE, HD26F connector, compatible with - 1 serial port (user or link), DTE or DCE, HD26F connector, compatible with
RS- 232/V.24, V.35, X.21/V.11, RS-449/V.36, RS-530, internal/external clocking RS- 232/V.24, V.35, X.21/V.11, RS-449/V.36, RS-530, internal/external clocking
- 2X 10/100BaseT Ethernet (RJ45 connectors) - 2X 10/100BaseT Ethernet (RJ45 connectors)
- 1 DSP connector per unit - 1 DSP connector per unit
- 2 expansion slots - 3 expansion slots
Chassis Stand alone base unit. 19” Rack mount Stand alone base unit. 19” Rack mount
Dimensions (H x W x D) 89 x 427 x 310mm 89 x 427 x 310mm
Weight 4.5 kg 4.5 kg
ENVIRONMENTAL
Operating Temperature 0° to 45° C 0° to 45° C
Storage Temperature -20º to 65º C -20º to 65º C
Relative Humidity 10% to 90%, non-condensing 10% to 90%, non-condensing
SOFTWARE OPTION
SkyPerformer & TCP/IP Acceleration SkyPerformer, TCP/IP Accelleration and ATM
OPTIONAL INTERFACES/MODULES
Analog telephony - 2 and 4-port FXS and FXO modules with on-board DSP (software controllable impedance, RJ11 connector)
- 4-port E&M module with on-board DSP (2 or 4 wire, types I, II, or V, 600 ohms, RJ48 connectors)
- 4 wire Push to Talk (PTT) option available
Digital - Single & Dual port T1/E1 (software configurable, RJ48 connectors, adapter cable required for BNC E1-75, NT/TE)
- Dual port BRI S/T (1/2B+1D, 1/2B+0D, phantom power, NT/TE, RJ48 connectors)
Data - 2-port universal serial WAN interface (user or link), DTE or DCE, HD26F connector, interface compatible
with RS-232/V.24, V.35, 21/V.11, RS- 449/V.36, RS530, internal/external clocking
DSP (Internal): DSP modules supporting up to 8 BRI voice channels - DSP modules supporting 5 to 30 voice channels
- High Density DSP modules supporting 60 to 120 voice channels

NETWORK Modem Relay: V.32bis demodulation up to 14.4Kbps, STU-III DIGITAL TELEPHONY

Network Topology: Mesh, hierarchical, star, point-to-point, secure phones over PowerCell, modem pass through (G.711) ISDN and QSIG T1/E1 PRI and BRI signaling: EuroISDN/ETSI,
satellite point-to-point/multipoint (SkyPerformer option) for other modems National and Japan
Automatic node discovery and rerouting with least cost Network signaling: Any-to-any switching, using PowerCell T1 signaling: robbed bit signaling, CCS transparent, SS7
metric routing including end-to-end QSIG/ISDN transport with idle filtering and spoofing
Automatic load balancing, bandwidth on demand (over Analog telephony channels: E1 signaling: CAS, CCS transparent, SS7 transport with idle
leased line), dial back-up, time-of-day connect FXS - loop and ground start, forward disconnect, caller ID filtering
QoS: 8 classes of service, 16 priority weights, association to and local billing tone generation Digital CAS Signaling types: Immediate, Wink, FXO, FXS, FXO
802.1p and DiffServ TOS bits FXO - loop start, forward disconnect and caller ID detection ground, FXS ground, E1/R2 (compelled, semi-compelled,
E&M - immediate and wink start, custom DTMF), PLAR, custom (9230 only)
DATA
Pulse, DTMF and MF tone dialing Mu-law or A-law coding
Sync: PPP, BDLC, HDLC, SDLC, X.25, X.25 over Frame Relay
Voice traffic routing with alternates destinations and digits
annex F/G COMPLIANCE AND AGENCY APPROVAL
manipulation using local mapping tables, locally switched
Legacy Sync: COP, BSC, VIP, IBM/RJE, Uniscope, Poll/ Complies with or has obtained Regulatory Agency approval at
TDM calls (hairpin)
Select, Siemens Nixdorf, JCA, Zengin least the following standards:
Frame Relay: RFC-1490, UNI-DTE, UNI-DCE LAN EMC - Emission FCC Part 15, Class B EN 55022:1998 + A1 +
Asynchronous: ENQ/ACK, XON/XOFF, transparent 2x 10/100BaseT ports, two IP address per port A2, AS/NZS CISPR22
Ethernet interfaces: Ethernet II and IEEE 802.2, 802.3, SNAP EMC - Immunity EN 55024:1998 + A1 + A2
TELEPHONY
Standards: IP RIP V1/V2 or Static, OSPF, NAT, IP Multicast Safety IEC 60950-1, EN 60950-1, UL 60950-1, CSA C22-2
Voice compression algorithms (5 channels per DSP):
IGMP V1/V2 PIM-DM, BootP/DHCP relay, DHCP client, IPX N°60950-1, AS/NZS 60950
ACELP-CN (8K/6K), LDCD (16K), G.711, G.723.1, G.726,
RIP and SAP, LLC2, 802.1p/q prioritization and VLAN, 802.1D Telecom - Digital FCC Part 68 + TIA-968-A, IC CS-03 Issue
G.729 and G.729a
Spanning Tree Protocol (STP), MAC Layer 9 - Part 2 and Part 6, AS/ACIF S016, AS/ACIF S038, TBR 1 +
FAX Relay: Group 3 FAX over PowerCell. Super G3
Filter criteria: Based on protocol, address (source, TBR 2, TBR 3, TBR4, TBR 12 + TBR 13
configurable to pass through or fallback to G3. Group 4 FAX
destination or SAP), TOS bit/diffServ or custom filtering Telecom - Analog FCC Part 68 + TIA-968-A, IC CS- 03 Issue 8
and other non-voice bearer ISDN channel at 64K
- Part 1, AS/ACIF S002, TBR 15 + TBR 17, TBR 21

[email protected]
7755 Henri Bourassa Blvd. West, Montreal, Quebec
Canada H4S 1P7

A SUBSIDIARY OF COMTECH EF DATA

www.memotec.com
0509