KTD-041 Series: KCC Co., LTD
KTD-041 Series: KCC Co., LTD
KTD-041 Series: KCC Co., LTD
KTD-041 series
Features
How to Order
KTD-041 P - 022
① ② ③
② Pressure range
P Positive(0.0~1.0MPa)
C Compound(-100.0~100.0kPa)
Specifications
Type KTD-041P(Positive) KTD-041C(Compound)) Two color(red,green,orange) Main & Unit display
LCD display
Rated pressure range 0.000~1.000MPa -100.0~100.0kPa Orange Secondary display(Sampling rate: 5 times/1sec.)
Setting pressure range -0.100~1.000MPa -101.0~101.0kPa Display Switch ON Indicator Orange (1 & 2 Indicator) OUT1 OUT2
Resisting pressure 1.5MPa 300kPa Update time Adjustable
Application Filtered air, Non-corrosive / Non-flammable gas Indicator accuracy ±2% F.S ±1 digit (ambient temperature:25 ±3℃)
kPa - 0.1 Repeatability
±0.2% F.S. ±1 digit
MPa 0.001 - (Switch output)
Setting kgf/㎠ 0.01 0.001 Enclosure IP40
pressure bar 0.01 0.001 Ambient
resolution temperature range 0 ~ 50℃
psi 0.1 0.01
(Operation)
inHg - 0.1
Ambient
mmHg - 1
Environ- temperature range -10~60℃(No condensation or freezing)
Power supply voltage DC12~24V(Ripple ±10% less) (Storage)
mental
Current consumption ≦ 40mA (With no load) standard Ambient humidity range Operation/Storage: 35~85%RH(No condensation)
Output type 2 NPN or 2 PNP open collector outputs Resisting voltage 1000V AC 1-min(between case and lead wire)
Max. load current 125mA Insulation resistance 50MΩ(at 500V DC, between case and lead wire)
Max. supply voltage DC30V(NPN Output), DC24V(PNP Output) Total amplitude 1.5mm or 10G, 10Hz-55Hz-10Hz scan for 1
Switch Vibration resistance
Residual voltage ≦ 1.5V minute, two hours each direction of X, Y and Z
output
Response Time Hattering-proof function: 50,250,500,1000,2000,3000ms Shock resistance 100m/s2(10G), 3 times each in direction of X, Y and Z
Output short circuit Temperature characteristic ±2% F.S. of detected pressure (25℃) at temp. Range of 0~50℃
Yes
protection Lead wire Oil-resistance cable(0.15mm2)
Weight 65g(with 2 meter lead wire), 30g(with 2 meter Male connector)
- 1 www.kccpr.com
KCC Co., Ltd.
PNEUMATIC & HYDRAULIC KTD-041 series
Digital pressure switch for regulator
Circuit Diagram
2 NPN Output
출력 2 PNP Output
출력
Brown
DC (+) (갈색)
wire Brown
DC (+) (갈색)
wire
Black
부하
Resistor OUT1(흑색)
wire
부하
주회로
Black
주회로
Resistor
OUT1(흑색) OUT2(백색)
White wire
Switch
Switch
wire
OUT2(백색)wire
White 부하
Resistor
부하
Resistor
Blue
DC (-) (청색)
wire Blue
DC (-) (청색)
wire
Dimensions
- 2 www.kccpr.com