Art Rocket - Drapery and Folds
Art Rocket - Drapery and Folds
Art Rocket - Drapery and Folds
Fabric and folds can take all sorts of forms depending on the softness of the
material and the shape of the body. This illustrated tutorial by comic artist
miyuli covers basic concepts and approaches for drawing fabrics of all kinds.
Materials
It is very important to consider the materials that you draw when dealing with
folds. They all have their very own characteristics that help to decide where to
put the appropriate folds. Their texture dictates how diffused the shadows are.
Read articles »
Thicker material has wider folds that are usually less visible.
Hard materials are usually pulled more at the bending area or at the seams.
Soft and thin material produces the most folds, especially around the bending
areas.
The amount of folds also depends on how heavy the fabric is and what kind of
material it is made of. When drawing fabric it is a good idea to consider how
thick/thin, hard/soft, heavy/light and smooth/textured the material is first.
Heavy fabric causes folds of a different volume and different width. It is also
more idle and shows fewer folds even when moving.
All clothes have their own arrangement of parts, which heavily influences the
formation of folds.
It’s good to familiarise yourself with common placements of seams. You don’t
need to draw them all, but it is better to have a good fundamental knowledge of
the construction.
Folds tend to pull at prominent seams, especially on clothes like suits where the
transition between seams is quite noticeable at the shoulder.
Sweaters usually have their arm seams much lower and the folds don’t pull at
them as much.
Clothes with a wide cut show different folds than clothes with a narrow cut. A
tight cut follows the form of the body and wraps around it. Wide clothes show a
lot of droopy folds that go from the pulling point towards the ground.
Clothes are often designed with folds or lack thereof in mind.
Fitted material is designed to look elegant with as few folds as possible. When
clothes are too tight or too loose there are more folds that give a less elegant
appearance of the clothing, especially when looking at the silhouette.
Worn-out fabric tends to crease more than new or well-maintained fabrics.
Note: When drawing clothes and folds, it can help to consider what material fits
the character’s personality first.
External influences
Movement
When the body is resting the fabric is usually dragged down by gravity. More
prominent droopy folds appear the wider and lighter the fabric is.
When bent the fabric is pressed together and creates hollow shapes that vary in
size.
There are more bumps with more narrow material. Wide material tends to
squish together with fewer folds.
The material adapts to the forms’ movement. Folds usually follow the twist. It
can be very helpful to emphasize the movements.
Note that the lighter and thinner material in the example above shows fewer
folds since the arm is still mostly resting.
The arms heavily dictate the pulling areas where folds emerge.
Opening a jacket absorbs some of the pulling when the arms are raised.
Pants
From the back, you can see folds forming under the butt region that go up to the
hip.
The folds at the knees are also visibly pulled by the hips from the back view.
In general, when the body is just standing and resting, there are less dynamic
folds.
When a leg is lifted, the knee becomes the strongest pulling point.
Be careful of the forms that the pant legs create when the leg moves.
Depending on the thickness of the material the shadows around the folds
appear slightly different.
When shading folds, it’s good to use a combination of soft and hard edges.
When painting pay attention to how smooth and soft the material is. The
smoother it is, the more it reflects light and has a brighter highlight. Rougher
and more textured materials diffuse light.
The darkest area is usually where forms are pressed together and an occlusion
shadow appears. This also applies to very deep creases where light does not
reach.
Here are some quick tips that I noticed while shading materials.
The shading, like the width of the folds, varies between soft edges or highlights
depending on the material, so it’s good to familiarise yourself with as many
materials as possible to build up a rich visual library.
Similar Articles
Recommended Articles
Easy Steps to Creating Chibi Characters
Read art tutorials and interviews with concepts artists for films, games, and animation.
Learn techniques for creating expressive and fun character art with these tutorials.
Whether you're creating manga, comics, or webtoons, here you'll find the best techniques to
create your story!
@clipstudioofficial
Terms of Use
Cookie Consent Options
Site map
Art Rocket
Terms of Use
Cookie Consent Options
Site map
Run by Celsys, Inc.
Clip Studio TIPS
CLIP STUDIO.NET