Fluke Multimeter Comparison
Fluke Multimeter Comparison
Working on VSDs/VFDs: Working on VSDs/VFDs: Work faster and safer with Electrical maintenance and Electrical maintenance Residential HVAC mainte- Electronic troubleshooting: Industrial troubleshooting Combine a digital insulation
Take accurate voltage, current Take accurate voltage, current
Fluke Connect (FC) wireless troubleshooting: Variety of troubleshooting: When you nance: Lower voltage HVAC Troubleshoot a wide variety in indoor and outdoor harsh tester with a full-featured,
and frequency measurements and frequency measurements test tools: commercial electrical trou- need to eliminate false or residential maintenance, in- of measurement parameters, environments: Dustproof, true-rms digital multimeter in
on the output side of the drive on the output side of the drive
The 3000 FC wireless multi- bleshooting, installation and “ghost” voltages or perform stallation and troubleshooting. including frequency and waterproof, shockproof multi- a single, compact, handheld
at either the drive itself or at at either the drive itself or at
meter and associated wireless maintenance. continuity, connection or basic capacitance. meter designed to withstand unit, which provides maxi-
the motor terminals. the motor terminals. modules allows users to work wiring checks. Temperature and microamp the toughest environments. mum versatility for both trou-
safer, log time stamped read- Temperature measurements: measurements: Trouble- bleshooting and preventative
Graphing: View logged values Industrial troubleshooting: ings, be in two places at once Built-in thermometer con- Non-contact voltage detec- shooting problems with HVAC Working on VSDs: Take maintenance.
graphically in the field right All of the resolution and ac- and see multiple readings veniently allows you to take tion: Integrated non-contact equipment and flame sensors. accurate voltage, current and
on the meter, without a PC. curacy you need to solve more simultaneously to solve com- temperature readings without voltage detection simplifies frequency measurements on Industrial troubleshoot-
problems on motor drives, plex electrical problems faster. having to carry a separate many tasks. the output side of the drive at ing: Whether you work on
Applications Logging: For unattended in-plant automation, power instrument. either the drive itself or at the motors, generators, cables,
monitoring of signals over distribution, and electrome- Build the system as your motor terminals. or switch gear, the Insulation
time, to detect intermittent chanical equipment. needs grow: Start with the Multimeters is ideally suited
problems. multimeter and expand your for predictive and preventive
Checking power quality: measurement and trouble- maintenance measurement
Testing motor windings or Capture glitches and spikes as shooting capabilities by tasks in electrical and
contact resistance: Allows short as 250 μs. Identify adding additional meters to industrial applications. Polar-
testing of resistance up to irregular signals. meet your specific applications ity Index (Pi) and Dielectric
50 ohms with one milliohm including three-phase load Absorption Ratio (DAR) tests
(0.001 ohm) resolution. studies with iFlex or voltage identify problems faster.
monitoring.
Yes (with ir3000 FC Yes (see connected products Yes (coming early 2016)
connector, sold separately) on reverse side)
Basic features
Counts 50,000 20,000 6,000 6,000 6,000 6,000 6,000 20,000 6,000
True-rms readings ac+dc ac ac ac ac ac ac ac ac
Basic dc accuracy 0.025 % 0.05 % 0.09 % 0.09 % 0.5 % 0.5 % 0.5 % 0.05 % 0.09 %
Wide bandwidth 100 kHz 20 kHz 20 kHz 5 kHz
Auto/manual ranging •/• •/• •/• •/• •/• •/• •/• •/• •/•
Measurements
Voltage ac/dc 1000 V 1000 V 1000 V 1000 V 600 V 600 V 600 V 1000 V 1000 V
Current ac/dc 10 A 10 A 400 mA 10 A 10 A 600 µA 10 A 10 A 400 mA
Resistance 500 MΩ 50 MΩ 50 MΩ 50 MΩ 40 MΩ 40 MΩ 40 MΩ 50 MΩ 50 MΩ
Frequency 1 MHz 200 kHz 100 kHz 100 kHz 100 kHz 100 kHz 100 kHz 200 kHz 100 kHz
Capacitance 100,000 µF 10,000 µF 10,000 µF 10,000 µF 10,000 µF 10,000 µF 10,000 µF 10,000 µF 10,000 µF
Temperature (+) 1350 °C (+) 1090 °C (with t3000 FC*) (+) 400 °C (+) 400 °C (+) 1090 °C (+) 537 °C
Insulation test voltages 50, 100, 250, 500, 1000 V
Pi/DAR timed ratio tests •
*Sold separately
Meters designed for the way you work
ADVANCED METERS GENERAL PURPOSE COMPACT METERS SPECIALTY METERS
Meters can be used as a stand-alone tool or as part of the Fluke Connect system
©2015 Fluke Corporation. All trademarks are the property of their respective owners. WiFi or cellular service required to share data. Smart phone, wireless service and data plan not included with purchase. First 5 GB of storage is free.
Learn more at flukeconnect.com Phone support details can be viewed at fluke.com/phones. Apple and the Apple logo are trademarks of Apple Inc. registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc. 8/2015 6005195a-en