TC7X Technical Accessory Guide

NOTE: This document is only for general reference. Solution Builder and related PMBs should be used for product availability, pricing, and final solution selection.

Cradles/Charging

Part Number Picture Description Notes Required Items

►Supports charging of spare Power

Precision+ batteries used with TC70x
and TC75x series. Blue dot/label on
cradle distinguishes from TC70/TC75
cradle (CRD-TC7X-SE2CU1-01).
►Will also support charging of
TC70/TC75 series batteries (non-Power ►Power Supply (PWR-
2-Slot Charge-Only Precision+). BGA12V50W0WW and CBL-
CRD-TC7X-SE2CPP-01 ShareCradle (for all TC7X ►Will charge both TC7X with 1X battery DC-388A1-01)
series) and one spare 1X battery ►AC Line Cord (23844-00-
►Compatible with TC7X with a hand 00R).
strap and Stylus attached
►Also compatible with Snap-On
accessories attached (e.g. MSR,
Trigger Handle etc…)
►Connects to charging connectors on
bottom of TC7X for charging

►Supports charging of spare Power

Precision+ batteries used with TC70x
and TC75x series. Blue dot/label on
cradle distinguishes from TC70/TC75
cradle (CRD-TC7X-SE2EU1-01).
►Will also support charging of
TC70/TC75 series batteries (non-Power
Precision+).
►Will charge both TC7X with 1X battery
and one spare 1X battery
►Compatible with TC7X with a hand ►Power Supply (PWR-
strap and Stylus attached BGA12V50W0WW and CBL-
2-Slot
►NOT compatible with Snap-On DC-388A1-01)
USB/Ethernet/Charging
CRD-TC7X-SE2EPP-01 accessories attached (e.g. MSR, ►AC Line Cord (23844-00-
ShareCradle (for all TC7X
Trigger Handle etc…) 00R).
series)
►Connects to charging connectors on ►USB Cable (25-124330-01R)
bottom of TC7X for charging and for PC connection
connects to communication port on
back of TC7X for USB communications.
►USB to Ethernet Module (MOD-MT2-
EU1-01) integrated into the bottom of
the cradle
►Mechanical switch selects between
USB B port and RJ45 Ethernet jack.
►10/100/1000 Mbps speed
►LEDs on module indicate connectivity
and speed.

►Attaches to 2-Slot USB/Charging

ShareCradle (CRD-TC7X-SE2EU1-01)
to provide Ethernet support
►Mechanical switch selects between
USB B port and RJ45 Ethernet jack.
2-Slot USB/Charging
►10/100/1000 Mbps speed
MOD-MT2-EU1-01 USB to Ethernet Module ShareCradle (CRD-TC7X-
►LEDs on module indicate connectivity
SE2EU1-01)
and speed.
►Already pre-installed on Ethernet
Cradle (CRD-TC7X-SE2EU1-01). This
would be a spare module if ordered for
the TC7X.

EMC Product Line - TC7X TAG Page 1 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
 ►Durable cradle design for enterprise
PSDTC70-01 use
Portsmith Single Slot Charge- ►5VDC, 2A power to slot
(3rd party)
Only Cradle Kit ►Kit contains:
- Portsmith Single slot cradle
- Power supply for international use.

http://www.portsmith.com

►Durable cradle design for enterprise

use
►5VDC, 2A power to slot
►Bluetooth to Ethernet connectivity
►Up to 5 concurrent Bluetooth
PSDTC70-01-BT connections w/ unlimited pairing.
►Bluetooth SIG certified
Portsmith Single Slot
(3rd party) ►Kit contains:
Ethernet Charging Cradle Kit
- Portsmith Single slot cradle
- Portsmith Bluetooth adaptor
(PSA5BT1E)
- Power supply for international use
- Power splitter cord to power both
cradle and Bluetooth adapter from a
single power supply

http://www.portsmith.com

►Will charge up to five TC7X units

►Compatible with TC7X with a hand
strap and Stylus attached
►Also compatible with Snap-On
accessories attached (e.g. MSR,
Trigger Handle etc…) ►DC Line Cord (CBL-DC-
5-Slot Charge-Only ►Can accommodate either five TC7Xs 382A1-01) and Power Supply
CRD-TC7X-SE5C1-01
ShareCradle or four TC7Xs and one 4-Slot Spare (PWR-BGA12V108W0WW)
Battery Charger ►AC Line Cord (23844-00-00R
►Can be racked/ mounted in a
standard 19inch rack system via the
mounting accessory
►Connects to charging connectors on
bottom of TC7X for charging

EMC Product Line - TC7X TAG Page 2 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
 ►Will charge up to five TC7X units
►Compatible with TC7X with a hand
strap and Stylus attached
►Also compatible with Snap-On
accessories attached (e.g. MSR,
Trigger Handle etc…)
►Can accommodate either five TC7Xs
or four TC7Xs and one 4-Slot Spare
5-Slot Charge-Only Battery Charger
CRD-TC7X-SE5C-KT2
ShareCradle Kit ►Can be racked/ mounted in a
standard 19inch rack system via the
mounting accessory
►Connects to charging connectors on
bottom of TC7X for charging
►Includes DC Line Cord (CBL-DC-
381A1-01), Power Supply (PWR-
BGA12V108W0WW), and AC Line
Cord (23844-00-00R)

►Will charge up to four TC7X units and

four spare batteries
►Compatible with TC7X with a hand
strap and Stylus attached
►Also compatible with Snap-On
accessories attached (e.g. MSR,
Trigger Handle etc…)
►Can be racked/ mounted in a
standard 19inch rack system via the ►DC Line Cord (CBL-DC-
mounting accessory 382A1-01) and Power Supply
5-Slot Charge-Only
►Connects to charging connectors on (PWR-BGA12V108W0WW)
CRD-TC7X-SE5KT1-01 ShareCradle with Spare
bottom of TC7X for charging ►AC Line Cord (23844-00-00R
Battery Charging slot
►Includes 5-Slot Charge-Only ►4-Slot Battery Charger (SAC-
ShareCradle (CRD-TC7X-SE5C1-01) TC7X-4BTYPP-01)
with four TC7X slots and ShareCradle
4-Slot Battery Charger Adapter Cup
(CUP-SE-BTYADP1-01)
►NOTE: Only one TC7X 4-Slot Battery
Charger (SAC-TC7X-4BTYPP-01) can
be installed on the 5-Slot ShareCradle.
Charger is installed on left most slot on
ShareCradle.

►Will charge up to four TC7X units and

four spare batteries
►Compatible with TC7X with a hand
strap and Stylus attached
►Also compatible with Snap-On
accessories attached (e.g. MSR,
Trigger Handle etc…)
►Can be racked/ mounted in a
standard 19inch rack system via the
mounting accessory
►Connects to charging connectors on
bottom of TC7X for charging
5-Slot Charge-Only ►Includes 5-Slot Charge-Only
CRD-TC7X-5C4B-KT1 ShareCradle with Spare ShareCradle with Spare Battery
Battery Charging Kit (US) Charging (CRD-TC7X-SE5KT1-01), 4-
Slot Battery Charger (SAC-TC7X-
4BTYPP-01), Battery Charger Cradle
Adapter Cup (CUP-SE-BTYADP1-01),
DC Line Cord (CBL-DC-381A1-01),
Power Supply (PWR-
BGA12V108W0WW), and AC Line
Cord (23844-00-00R)
►NOTE: Only one TC7X 4-Slot Battery
Charger (SAC-TC7X-4BTYPP-01) can
be installed on the 5-Slot ShareCradle.
Charger is installed on left most slot on
ShareCradle.

EMC Product Line - TC7X TAG Page 3 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
 ►Will charge up to four TC7X units and
four spare batteries
►Compatible with TC7X with a hand
strap and Stylus attached
►Also compatible with Snap-On
accessories attached (e.g. MSR,
Trigger Handle etc…)
►Can be racked/ mounted in a
standard 19inch rack system via the
mounting accessory
►Connects to charging connectors on
bottom of TC7X for charging
5-Slot Charge-Only ►Includes 5-Slot Charge-Only
CRD-TC7X-5C4B-UK1 ShareCradle with Spare ShareCradle with Spare Battery
Battery Charging Kit (for UK) Charging (CRD-TC7X-SE5KT1-01), 4-
Slot Battery Charger (SAC-TC7X-
4BTYPP-01), Battery Charger Cradle
Adapter Cup (CUP-SE-BTYADP1-01),
DC Line Cord (CBL-DC-381A1-01),
Power Supply (PWR-
BGA12V108W0WW), and AC Line
Cord for UK (50-16000-219R)
►NOTE: Only one TC7X 4-Slot Battery
Charger (SAC-TC7X-4BTYPP-01) can
be installed on the 5-Slot ShareCradle.
Charger is installed on left most slot on
ShareCradle.

►Allows speeds up to 1 Gb
►Will charge both TC7X with 1X battery
and one spare 1X battery
►Compatible with TC7X with a hand
strap and Stylus attached
►NOT compatible with Snap-On
accessories attached (e.g. MSR,
►DC Line Cord (CBL-DC-
Trigger Handle etc…)
5-Slot Ethernet/Charging 382A1-01) and Power Supply
CRD-TC7X-SE5EU1-01 ►Can accommodate either five TC7Xs
ShareCradle (PWR-BGA12V108W0WW)
or four TC7Xs and one 4-Slot Spare
►AC Line Cord (23844-00-00R
Battery Charger
►Can be racked/ mounted in a
standard 19inch rack system via the
mounting accessory
►Connects to communication/ charging
port on back of TC7X for charging and
communications.

►Supports charging of spare Power

Precision+ batteries used with TC70x
and TC75x series. Blue dot/label on For Standalone use:
charger distinguishes from TC70/TC75- ►Power Supply (PWR-BGA12V50W0WW
and CBL-DC-388A1-01)
only charger (SAC-TC7X-4BTYC1-01).
►AC Line Cord (23844-00-00R).
►Will also support charging of
TC70/TC75 series batteries (non-Power For 5-Slot ShareCradle mounting:
4-Slot Battery Charger (for all Precision+). ►5-Slot Charge-Only ShareCradle (CRD-
SAC-TC7X-4BTYPP-01
TC7X series) ►Charges up to four spare batteries TC7X-SE5C1-01) and ShareCradle 4-Slot
only Battery Charger Adapter Cup (CUP-SE-
BTYADP1-01)
►Can be used standalone or one OR
charger can be installed on the 5-Slot 5-Slot Charge-Only ShareCradle with
ShareCradle to allow four TC7X units Spare Battery Charging slot (CRD-TC7X-
and four spare batteries to be charged SE5KT1-01)
simultaneously. Charger will pull power
from 5-Slot ShareCradle.

EMC Product Line - TC7X TAG Page 4 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
 ►Allows for a TC7X 4-Slot Battery
Charger (SAC-TC7X-4BTYPP-01 or
SAC-TC7X-4BTYC1-01) to be charged
and docked on the 5-Slot
ShareCradles.
►Adapter Cup will pull power from 5-
4-Slot Battery Charger
Step 2:
Slot ShareCradle and has pigtail cable
CUP-SE-BTYADP1-01
Adapter Cup to power 4-Slot Battery Charger.
Choose a mounting option for cradles ►NOTE: Only one TC7X 4-Slot Battery
Charger (SAC-TC7X-4BTYPP-01 or
SAC-TC7X-4BTYC1-01) can be
Mounting accessories for cradles installed on the 5-Slot ShareCradle.
Charger is installed on left most slot on
Note: A mounting bracket (rack/wall or desktop) is required with any cradle configuration.
ShareCradle.
Rack/Wall Bracket Desktop Bracket ►Allows for rack and wall mounting of
one 5-Slot ShareCradle OR up to two 2-
Slot Cradles or 4-Slot Battery Chargers.
►Bracket can be mounted on standard
19" network rack or on a wall.
►Provides cable routing slots and
removable power supply tray that
5-Slot ShareCradle Mounting stores and conceals power supplies.
BRKT-SCRD-SMRK-01
BRKT-SCRD-SMRK-01 Bracket ►Adjustable tabs & screw mounts for
Wall mounting bracket, allows to install BRKT-SCRD-SSDK-01 BRKT-SCRD-MSDK-01
any Single Slot or Multi-Slot cradle on a TC8000 Desk Mounting Bracket for
easy hanging/installation.
TC8000 Desk Mounting Bracket for
wall or a 19” IT rack. The bracket also ShareCradle. Allows to install the Single ►Adjustable
ShareCradle. Allowsorientations:
to install any
allows to install up to four 4Slot Spare Slot Cradle w/Spare Battery Charger on Multi-Slot cradle on a flat surface.
Battery Chargers together on a wall or a flat surface. (i.e. desktop). Note. This -(i.e.
25° HighNote.
desktop). Density (5-Slot Charge Only
This part number
standard 19” IT rack. part number includes the bracket only, includes the bracket only, order multi-
order single slot cradle separately.
Cradle) slot cradle separately.
- Horizontal (5-Slot Ethernet Cradle,
Single Slot Cradles, and 4-Slot Battery
Chargers)

►Supports snap on TC7X accessories, For Charging:

excluding the Pistol Grip Trigger Cigarette Lighter Auto Charge Cable
(CHG-AUTO-CLA1-01)
Handle.
OR
►Uses unique tabs on power cable Hard Wired Auto Charge Cable (CHG-
connector to ensure reliable power AUTO-HWIRE1-01)
CRD-TC7X-CVCD1-01 Charge-Only Vehicle Cradle connection.
►Includes removable mounting plate For Mounting:
Windshield Suction Mount (RAM-B-166U)
that provides for quick removal of the
OR
cradle using a single thumb screw on Vehicle Cradle RAM mount ball (RAM-B-
the top of the cradle. 238U) and additional RAM mount
hardware

23-7X-09-TPC-010 ► Available in both hard-wired and

(Charge-Only Cigarette cigarette light adapter cable
Lighter Adapter plug)
configurations
23-7X-09-TPC-020 ► Durable cradle design for rugged
(Charge-Only Hard-wired enterprise use
TIS Charge-Only Vehicle
power connection) ► AMPS hole pattern for simple wall,
Cradle
pedestal or vehicle dashboard
mounting
(3rd party)
► Swivel mount
► Does not include pictured RAM
brackets

http://tis-gmbh.de/en

EMC Product Line - TC7X TAG Page 5 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
 ►Includes TC7X Vehicle Data
Communication Device Holder/Cradle
(CRD-TC7X-DCVH-01) and USB I/O
Hub (SHARE-USBH-01) For Charging:
►15 pin connector connects Cigarette Lighter Auto Charge Cable
Holder/Cradle to USB I/O Hub (CHG-AUTO-CLA1-01)
►USB I/O Hub includes the following OR
ports: Hard Wired Auto Charge Cable (CHG-
AUTO-HWIRE1-01)
- 3 standard USB A size ports - each
can provide 1.5A current. For Mounting Cradle:
- 1 USB A Charge-Only port - can Windshield Suction Mount (RAM-B-166U)
Vehicle Data Communication
provide 1.5A current for charging cell OR
CRD-TC7X-VCD1-01 and Charge Cradle Kit with Vehicle Cradle RAM mount ball (RAM-B-
phones, tablets, headsets, etc.
USB I/O Hub 238U) and additional RAM mount
- 3.5mm headset jack
hardware
►TC7X is automatically placed in USB
Host mode For Mounting I/O Hub:
►Accepts 12/24V power from vehicle Mount on flat surface
and provides power conditioning OR
(SAE/ISO) to TC7X Vehicle Cradle RAM mount ball (RAM-B-
238U) and additional RAM mount
►Does NOT support snap on
hardware
accessories.
►Supports Handstrap + Stylus.
►Cradle must be powered externally for
USB ports to be functional.

USB I/O Hub (SHARE-USBH-01)

►Does NOT support snap on
For Mounting:
accessories.
Windshield Suction Mount (RAM-B-
Vehicle Data Communication ►Supports Handstrap + Stylus.
CRD-TC7X-DCVH-01 166U)
Device Holder/Cradle ►15 pin connector on cable is used to
OR
attach to USB I/O Hub (SHARE-USBH- Vehicle Cradle RAM mount ball
01) (RAM-B-238U) and additional RAM
mount hardware

►15 pin connector on cable is used to

Vehicle Data Communication
attach to USB I/O Hub (SHARE-USBH-
Device Holder/Cradle (CRD-TC7X-
01)
DCVH-01)
►Includes the following ports:
- 3 standard USB A size ports - each For Charging:
can provide 1.5A current. Cigarette Lighter Auto Charge
- 1 USB A Charge-Only port - can Cable (CHG-AUTO-CLA1-01)
provide 1.5A current or charging cell OR
USB I/O Hub for Vehicle
SHARE-USBH-01 phones, tablets, headsets, etc. Hard Wired Auto Charge Cable
Data Communication Cradle
- 3.5mm headset jack (CHG-AUTO-HWIRE1-01)
►Host device (TC7X) is automatically
placed in USB Host mode For Mounting:
Mount on a flat surface
►Accepts 12/24V power from vehicle
OR
and provides power conditioning
Vehicle Cradle RAM mount ball
(SAE/ISO) to host device (TC7X)
(RAM-B-238U) and additional RAM
►Hub must be powered externally for mount hardware
USB ports to be functional.

EMC Product Line - TC7X TAG Page 6 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
 ► Features a unique and rugged design that
not only secures and protects the TC7X,
but enables the operator to quickly and
easily adjust the cradle position for optimal
device access.
► A pivoting device securement arm on top
of the cradle holds the TC7X firmly into the
cradle during operation.
► Four vibration-mitigating pads on the back
of the cradle dramatically reduce shock to
the device. The pedestal mount features
quick-adjust joints with interlocking teeth for
superior strength and device stability in
Forklift Cradle with 8” Post for spite of excessive shock and vibration.
3PTY-PCLIP-710832
Forklift Grill Mounting ► Does NOT support snap on accessories.
TC75 Forklift Cradle with 8” Forklift Grill Mounting Hardware ► Supports Handstrap + Stylus.
► Does NOT charge TC7X
► NOTE: TC7X fits into cradle with display
Part Number Details facing away from driver (for driver safety).
Part Number 3PTY-PCLIP-710832
Model Number 710832 It will not allow TC7X to be inserted with
display facing the driver.
► NOTE: Restricted Product - Must open
Compatibility CPR at http://cpr.zebra.lan (Zebra internal
Clamps around bars with max site). Sample devices shall then be
dimensions of 40mm x 10mm
provided, and once the customer approves
these demo devices, the SKU shall be
Features & Benefits opened for sale to that customer. Refer to
• Rugged Design
PMB 2756 for details.
• 8 inch Solid-core aluminum pedestal arm
• Display faces away from Driver
• One-handed insertion/removal of device
• Quick and easy installation
• Adjustable for optimal positioning
• Weight capacity over 500 lbs
• Made of high grade Aluminum, ABS and ► Features a unique and rugged design that
Acetal plastic
• Manufactured in Sweden
not only secures and protects the TC7X,
but enables the operator to quickly and
The TC75 Forklift Cradle and mounting assembly by ProClip USA features
a unique and rugged design that not only secures and protects the TC75,
easily adjust the cradle position for optimal
but enables the operator to quickly and easily adjust the cradle position Technical Data device access.
for optimal device access. The cradle secures the TC75 with the screen Cradle Dim. 180 x 93 x 61 mm
Weight 2.30 lbs / 1.04 kgs ► A pivoting device securement arm on top
facing away from the operator.
Operating Temp. -40 to +70 Degrees Celsius of the cradle holds the TC7X firmly into the
A pivoting device securement arm on top of the cradle holds the TC75 Environmental RoHS , REACH Compliant
Life Cycle 96000 inserts/removals
cradle during operation.
firmly into the cradle during operation. Four vibration-mitigating pads on
the back of the cradle dramatically reduce shock to the device. Thermal Shock MIL Std 810G ► Four vibration-mitigating pads on the back
Pressure Wash SAE J1455, Sec 4.5.2, Lev 2 of the cradle dramatically reduce shock to
The TC75 cradle is affixed to the forklift headache rack by means of an Vibration MIL Std 810F.
adjustable, 8 inch long Solid-core aluminum pedestal mount with 500 lbs Operating: the device. The pedestal mount features
capacity. The pedestal mount features quick-adjust joints with 4g’s rms 0.03g²/Hz, quick-adjust joints with interlocking teeth for
interlocking teeth for superior strength and device stability in spite of Damage Random:
excessive shock and vibration. 16g’s rms (20Hz to 2KHz) superior strength and device stability in
Forklift Cradle1 Hour withduration
2” Post per axisfor spite of excessive shock and vibration.
3PTY-PCLIP-710833
Forklift Grill Mounting ► Does NOT support snap on accessories.
Contact Info ► Supports Handstrap + Stylus.
► Does NOT charge TC7X
Office: Company Info: ► NOTE: TC7X fits into cradle with display
ProClip USA, Inc. facing away from driver (for driver safety).
4915 Voges Road ProClip USA, Inc. provides In-Vehicle Device Mounting solutions and
Madison, WI 53718 accessories. The ProClip products are custom fit for virtually every
It will not allow TC7X to be inserted with
USA model and handheld device available such as cell phones display facing the driver.
Phone: +1 608-807-5320 smartphones, tablets, MP3 players, navigation systems, satellite
Fax: +1 920-372-0066 radios, two-way radios and mobile computing. These innovative,
► NOTE: Restricted Product - Must open
Email: [email protected] CPR at http://cpr.zebra.lan (Zebra internal
convenient, secure and easy-to-install mounting solutions
Web: www.proclipusa.com
provide a safer and more enjoyable driving experience.
site). Sample devices shall then be
provided, and once the customer approves
these demo devices, the SKU shall be
opened for sale to that customer. Refer to
PMB 2756 for details.

EMC Product Line - TC7X TAG Page 7 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
 Forklift Clamp Mount with Large Circular Holes

Part Number Details

Part Number 3PTY-PCLIP-215772
Model Number 215772

► Attaches to roll bar of a forklift. It

Forklift Clamp Mount with Large Circular Holes accommodates square, round and flat posts
and comes Compatibility
with a variety of screw sizes.
3PTY-PCLIP-710832
The circular hole pattern on andthe 3PTY-PCLIP-710833
oval plate is
designedClamps
to workto post
with or grillnumber
part on forklifts
3PTY-
Part Number Details PCLIP-710832 and 3PTY-PCLIP-710833 in
Part Number 3PTY-PCLIP-215772 those instances where there is a need for
Model Number 215772 Features
affixing to a thicker&post.
Benefits
► Circled •hole
Rugged Design
pattern for attachment of
• Works
round mount baseperfectly on the roll bar of a forkliftForklift Cradle (3PTY-PCLIP-
Forklift Cradle Clamp Mount
3PTY-PCLIP-215772 Compatibility ► Comes •with Mount to square
complete set or
of round
screws posts,
in or to a710832
flat or 3PTY-PCLIP-
with3PTY-PCLIP-710832
Large Circular Holes bar / headache rack
various sizes, allowing for the forklift mount 710833)
and 3PTY-PCLIP-710833
Clamps to post or grill on forklifts • Circled hole pattern for attachment of
to span from 130 mm to 5 mm
round mount base
► Weight •capacity overcomplete
Comes with 500 lbs set of screws in
This Forklift Clamp Mount affixes to the roll bar of a forklift. It ► NOTE: Restricted Product - Must open
various sizes, allowing for the forklift mount
accommodates square, round and flatFeatures
posts and&comes
Benefitswith a variety of CPR at http://cpr.zebra.lan (Zebra internal
• Rugged Design to span from 130 mm to 5 mm
screw sizes.
• Works perfectly on the roll bar of a forklift • Weight
site). Sample devices shall
capacity overthen500belbs
• Mount to square or round posts, or to
to work with part provided,• and
a flat Madeonce the grade
of high customer approves
Aluminum
The circular hole pattern on the oval plate
baris/designed
headache rack
number 3PTY-PCLIP-710832 and 3PTY-PCLIP-710833 in those these demo
instances of • Manufactured
devices, theinSKU Sweden shall be
• Circled hole pattern for attachment
where there is a need for affixing to a thicker
roundpost.
mount base opened for sale to that customer. Refer to
• Comes with complete set of screws in PMB 2756 for details.
This Forklift Clamp Mount affixes to the roll bar of a forklift. It
various sizes, allowing for the forklift mount
accommodates square, round and flat posts and comes with a variety of Technical Data
to span from 130 mm to 5 mm
screw sizes.
• Weight capacity over 500 lbs Dimensions 119 x 68 mm
The circular hole pattern on the oval plate is designed to work with part • Made of high grade Aluminum Weight
► Available 1.40 lbs / 0.63
in both hard-wired andkgs
PSVTC70-01
number 3PTY-PCLIP-710832 and 3PTY-PCLIP-710833 in those instances • Manufactured in Sweden Operating Temp. -40 to +60 Degrees Celsius
where there is a need for affixing to a thicker post.
cigarette light adapter RoHS
Environmental cable, REACH Compliant
(Charge-Only Cigarette
configurations
Lighter Adapter plug)
Technical Data ► Durable cradle design for rugged
Dimensions 119 x 68 mm
PSVTC70-02 Weight 1.40 lbs / 0.63 kgs enterprise use
PortSmith Charge-Only
(Charge-Only Hard-wired ► AMPS hole pattern for simple wall,
Operating Temp. -40 to +60 Degrees Celsius
Vehicle Cradles RoHS , REACH Compliant
Environmental
power connection) pedestal or vehicle dashboard
mounting
(3rd party)
Contact Info ► Swivel mount
► Supports snap-on accessories,
including Pistol Grip Trigger Handle.
Office: Company Info:
http://www.portsmith.com
Contact Info ProClip USA, Inc.
4915 Voges Road ProClip USA, Inc. provides In-Vehicle Device Mounting solutions and
Madison, WI 53718 accessories. The ProClip products are custom fit for virtually every
USA model and handheld device available such as cell un-
phones
Office: Company Info: ►Available in both powered and
Phone: +1 608-807-5320 smartphones, tablets, MP3 players, navigation systems, satellite
ProClip USA, Inc. powered versions (cigarette lighter
Fax: +1 920-372-0066
4915 Voges Road ProClip USA, Inc. provides In-Vehicle Device Mountingradios,
solutionstwo-way
and radios and mobile computing. These innovative,
Madison, WI 53718 Email:The
accessories. [email protected]
ProClip products are custom fit for virtually adapter
convenient,
every secureor
andstraight through
easy-to-install power
mounting solutions
USA modelWeb: www.proclipusa.com
and handheld device available such as cell phones providecable)
a safer and more enjoyable driving experience.
Phone: +1 608-807-5320 smartphones, tablets, MP3 players, navigation systems, satellite
Fax: +1 920-372-0066 ►Versions available with top support
radios, two-way radios and mobile computing. These innovative,
Email: [email protected]
convenient, secure and easy-to-install mounting solutionsclip that holds the device in place for a
Web: www.proclipusa.com
ProClip / Brodit various ProClip/Brodit
provide a safer Vehicle
and more enjoyable driving experience. secure fit.

(3rd party) Cradles ►Does not work with snap-on

accessories
►Cradle tilts and swivels
►Powered versions provide:
- 10 Watts (2A) fast charging power
- Hard wire to 12 / 24 V vehicle power
sources
- Black box converts from 12/24 V to
5.4 V output
See Zebra's ProClip accessory
overview video at:
http://www.proclipusa.com https://www.brainshark.com/zebratechnologies/vu?pi=zH1z9b2FfzOwdGz0

►12/24V
►Includes tab on Barrel jack end for
Cigarette Lighter Auto ensuring a reliable connection to TC7X
CHG-AUTO-CLA1-01 Charger Cable for Vehicle Vehicle Cradles.
Cradles ►Only compatible with TC7X Vehicle
Cradles (CRD-TC7X-VCD1-01 or CRD-
TC7X-CVCD1-01)

►12/24V
►Includes tab on Barrel jack end for
ensuring a reliable connection to TC7X
Vehicle Cradles.
Hard Wired Auto Charger ►Bare wire end connects directly to
CHG-AUTO-HWIRE1-01
Cable for Vehicle Cradles vehicle power source.
►Only compatible with TC7X Vehicle
Cradles (CRD-TC7X-VCD1-01 or CRD-
TC7X-CVCD1-01)
►Approximate cable length is 13 ft.

EMC Product Line - TC7X TAG Page 8 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
 ►RAM Twist Lock Suction Cup with
Double Socket Arm and Diamond Base
Vehicle Cradle Windshield Adapter
RAM-B-166U
Suction Cup Mount ►Overall Length: 6.75”
►Attaches to back of Vehicle Cradles

►RAM 2.43" x 1.31" Diamond Ball Base Requires additional RAM

RAM-B-238U
Tilt Swivel MountVehicle
ball
Cradle RAM Mount
w/ 1" Ball hardware to mount vehicle
►Attaches to back of Vehicle Cradles cradle

Part Number Details

Part Number 3PTY-PCLIP-215500
Tilt Swivel Mount
Model Number 215500

►For mounting Vehicle Cradle on any

Part Number Details
Part Number
flat surface.
3PTY-PCLIP-215500
Model Number 215500 ►Angles/Tilts 15 degrees
Compatibility ►Swivels 360 degrees
Attaches to any flat surface or mounting ►Extends 1 inch / 2.54 cm
bracket. Compatibility ►Base Plate and Face Plate has AMPS
Attaches to any flat surface or mounting
bracket. hole pattern
Tilt Swivel Mount For TC7X ►Weight capacity 25 lbs / 11.34 kgs Vehicle Cradle (CRD-TC7X-
3PTY-PCLIP-215500 Features & Benefits
Vehicle Cradle Features & Benefits ►NOTE: Restricted Product - Must CVCD1-01)
• For use with holders/cradles
• For use with holders/cradlesforopenheavier
for CPR at http://cpr.zebra.lan
heavier
devices e.g. Tablets, devices e.g.Mobile Computing
Tablets, Mobile Computing
(Zebra internal site). Sample devices
Devices, Bar Code Scanners, Mobile Phones
Devices, Bar Code Scanners, Mobile Phones
• Angles/Tilts 15 degrees shall then be provided, and once the
• Angles/Tilts• 15 degrees
Swivels 360 degrees
• Extends 1 inch / 2.54 cm customer approves these demo
• Swivels 360• degrees Base Plate has AMPS hole devices,
pattern the SKU shall be opened for
• Extends 1 inch • Face / Plate
2.54hascm AMPS and center hole
patterns to accommodatesale to that customer. Refer to PMB
most cradles
• Base Plate •has AMPS
Weight hole
capacity pattern
25 lbs / 11.34 kgs for details.
2756
• Face Plate •has AMPS
Made of highand
gradecenter
ABS plastichole
• Manufactured in Sweden
patterns to accommodate most cradles
• Weight capacity 25 lbs / 11.34 kgs
• Made of high gradeData
Technical ABS plastic
• Manufactured in Sweden50 x 42 x ►24.50
Dimensions 4 inchmm Solid-core Aluminum quick-
Weight 0.062 lbs / 28.35 grams
This Tilt Swivel Mount is made for use with holders for heavier devices Operating Temp. -40 to +70adjust interlocking joints.
Degrees Celsius
e.g. Tablets, Mobile Computing devices, Bar Code Scanners, Two-way Environmental RoHS , REACH Compliant
Radios, Mobile Phones etc. Angle, tilt, swivel and/or extend your
►Mount also features a 2 inch 90-
holder/device for a better viewing position. It angles/tilts approx. 15 degree offset extension rod to enable
degrees, swivels 360 degrees and extends 1 inch/ 2.54 cm. Technical Data
both horizontal and vertical adjustment
4” Pedestal Mounting Kit with
The Base plate has the AMPS hole pattern and the Face plate has a centerWing
Dimensions Nuts 50 x 42 x 24.50 mm
to achieve optimal device/cradle
Weight
line hole patterns as well as the AMPS hole pattern to accommodate 0.062 lbs / 28.35 grams
most holders, cradles, mounts and car kits. Operating Temp. -40 to +70 Degrees positioning.
Celsius
This Tilt Swivel Mount is made for use with holders for heavier devices
Environmental RoHS , REACH ►Compliant
AMPS hole pattern in mount bases
e.g. Tablets, Mobile Computing devices, Bar Code Scanners, Two-way 4" tall Pedestal
Part Number Details Mounting Kit
Radios, Mobile Phones etc. Angle, tilt, swivel ► Quick and easy installation
Contactand/orInfo extend your ForPartTC7X
Number Vehicle Cradle -
3PTY-PCLIP-710834 Vehicle Cradle (CRD-TC7X-
holder/device 3PTY-PCLIP-710834
for a better viewing position. It angles/tilts approx. 15 Model Number 710834 ►Adjustable for optimal positioning
Horizontal & Vertical CVCD1-01)
degrees, swivels 360 degrees and extends 1 inch/ 2.54 cm. ►Weight capacity over 300 lbs
Office: Company Info:
Adjustment
ProClip USA, Inc. ►NOTE: Restricted Product - Must
4915 Voges Road ProClip USA, Inc. provides In-Vehicle Device Mounting solutions and
The Base plate has the AMPS hole pattern and the Face plate has WI
Madison, a 53718
center Compatibility
accessories.
open CPR at http://cpr.zebra.lan
The ProClip products are custom fit for virtually every
line hole patterns as well as the AMPS hole pattern to accommodate USA model
Attachand
to handheld (Zebra
device available such as cell
any flat surface phones internal site). Sample devices
Phone: +1 608-807-5320 smartphones, tablets, MP3 players, navigation systems, satellite
most holders, cradles, mounts and car kits. Fax: +1 920-372-0066 radios, two-way radios and mobile computing. shall then be provided, and once the
These innovative,
Email: [email protected]
Web: www.proclipusa.com
convenient, secure and easy-to-install mounting customer
solutions approves these demo
provide a safer and more enjoyable driving experience.
Features & Benefits devices, the SKU shall be opened for
• Rugged Design sale to that customer. Refer to PMB
Contact Info • 2 inch 90 degree offset extension rod
between bases 2756 for details.
• Interlocking teeth in joints
• AMPS hole pattern in mount bases
Office: Company Info:• Quick and easy installation
• Adjustable for optimal positioning
ProClip USA, Inc. • Weight capacity over 300 lbs
This4915
4 inchVoges
Solid-core
Road Aluminum Pedestal Mount come with quick-adjust
ProClip USA, Inc. provides In-Vehicle Device Mounting solutions and
interlocking joints. It has teeth within the joints providing a very strong • Made of high grade Aluminum
Madison, WI 53718
connection that can withstand up to 300 lbs.
accessories. The ProClip
• products are incustom
Manufactured Swedenfit for virtually every
USA model and handheld device available such as cell phones
ThisPhone: +1 608-807-5320
mount also features a 2 inch 90-degree offset extension rod to
smartphones, tablets, MP3 players, navigation systems, satellite
enable
Fax:both horizontal and vertical adjustment to achieve optimal
+1 920-372-0066
device/cradle positioning. radios, two-way radios and mobile computing. These innovative,
Email: [email protected]
convenient, secure and easy-to-install mounting solutions
Technical Data
TheWeb: www.proclipusa.com
solid aluminum round bases provide an industry-standard 4-hole
provide a safer and more enjoyable117.30
driving
Dimensions x 64 experience.
x 30 mm
AMPS mounting pattern with approximately 20 degrees of rotation to
Weight 65 lbs / 294.84 grams
facilitate the perfect mounting angle and device placement.
Operating Temp. -40 to +70 Degrees Celsius
Environmental RoHS , REACH Compliant
Onto the pedestal base you can mount a wide variety of products such as
tablets, mobile computers, scanning devices, payment terminals, two-
way radios, navigation units, printers, and mobile phones.

EMC ProductContact Info

Line - TC7X TAG Page 9 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
Office: Company Info:
ProClip USA, Inc.
4915 Voges Road ProClip USA, Inc. provides In-Vehicle Device Mounting solutions and
Madison, WI 53718 accessories. The ProClip products are custom fit for virtually every
USA model and handheld device available such as cell phones
Phone: +1 608-807-5320 smartphones, tablets, MP3 players, navigation systems, satellite
 ►4 inch Solid-core Aluminum quick-
adjust interlocking joints.
►Mount also features a 2 inch
Horizontal extension rod between
mount bases
4” Pedestal Mounting Kit with Wing Nuts ►AMPS hole pattern in mount bases
►Quick and easy installation
►Adjustable for optimal positioning
4" tall Pedestal Mounting Kit - Vehicle Cradle (CRD-TC7X-
3PTY-PCLIP-710835 Part Number Details ►Weight capacity over 300 lbs
Horizontal
Part Number Adjustment
3PTY-PCLIP-710835 CVCD1-01)
Model Number 710835 ►NOTE: Restricted Product - Must
open CPR at http://cpr.zebra.lan
(Zebra internal site). Sample devices
Compatibility shall then be provided, and once the
Attach to any flat surface customer approves these demo
devices, the SKU shall be opened for
sale to that customer. Refer to PMB
Features & Benefits
• Rugged Design 2756 for details.
• 2 inch Horizontal extension rod between
mount bases
• Interlocking teeth in joints
• AMPS hole pattern in mount bases
• Quick and easy installation
• Adjustable for optimal positioning
This 4 inch Solid-core Aluminum Pedestal Mount come with quick-adjust • Weight capacity over 300 lbs
interlocking joints. It has teeth within the joints providing a very strong • Made of high grade Aluminum
connection that can withstand up to 300 lbs. • Manufactured in Sweden

This mount also features a 2 inch horizontal extension rod that enables
►2 inch Solid-core Aluminum quick-
horizontal adjustment to achieve optimal device/cradle positioning. adjust interlocking joint.
The solid aluminum round bases provide an industry-standard 4-hole
►The round bases provide an industry-
Technical Data
AMPS mounting pattern with approximately 20 degrees of rotation to standard 4-hole AMPS mounting
2” mounting
facilitate the perfect Pedestal Mounting
angle and device placement. Kit withDimensions Wing
Weight Nuts 116.75 x 64 x 30 mm
0.65 lbs / 294.84 grams pattern with approximately 20 degrees
Operating Temp. -40 to +70 Degrees Celsius
RoHS , REACH Compliant of rotation to facilitate the perfect
Onto the pedestal base you can mount a wide variety of products such as
Environmental
tablets, mobile computers, scanning devices, payment terminals, two-
way radios, navigation units, printers, and mobile phones. mounting angle and device placement.
Part Number Details ►Adjustable for optimal positioning
2"ParttallNumber
Pedestal Mounting
3PTY-PCLIP-710836 Kit Vehicle Cradle (CRD-TC7X-
3PTY-PCLIP-710836 Model Number 710836
►Weight capacity over 300 lbs
For TC7X Vehicle Cradle CVCD1-01)
►NOTE: Restricted Product - Must
open CPR at http://cpr.zebra.lan
Contact Info (Zebra internal site). Sample devices
Compatibility
Attach to any flat surface shall then be provided, and once the
customer approves these demo
Office: Company Info:
ProClip USA, Inc. devices, the SKU shall be opened for
4915 Voges Road ProClip USA, Inc. provides In-Vehicle Device Mounting solutions and sale to that customer. Refer to PMB
Madison, WI 53718
Features & Benefits
accessories. The ProClip products are custom fit for virtually every
USA • Rugged
model and handheld deviceDesign
available such as cell phones 2756 for details.
Phone: +1 608-807-5320 • Interlocking
smartphones, tablets, teeth
MP3 players, in joints systems, satellite
navigation
Fax: +1 920-372-0066 radios, two-way• radios
AMPSand
hole pattern
mobile in mount
computing. bases
These innovative,
Email: [email protected]
• Quick
convenient, secure and easy-to-install mounting solutions
and easy installation
Web: www.proclipusa.com
provide a safer•andAdjustable
more enjoyable drivingpositioning
for optimal experience.
• Weight capacity over 300 lbs
• Made of high grade Aluminum
• Manufactured in Sweden

This 2 inch Solid-core Aluminum Pedestal Mount come with a quick-

adjust interlocking joint. It has teeth within the joint providing a very
►Provides a smaller footprint for
strong connection that can withstand up to 300 lbs. charging TC7X in the vehicle via a
cigarette light adapter.
The round bases provide an industry-standard 4-hole AMPS mounting
CHG-TC7X-CLA1-01
pattern with approximately 20 degrees of rotation to facilitate the Charging Cable Cup with ►Connects to charge contacts on
perfect mounting angle and device placement. Technical Data
Cigarette Lighter Adapter bottom of TC7X.
Dimensions 64.56 x 64 x 30 mm
Onto the pedestal base you can mount a wide variety of products such as Weight 0.40 lbs / 181.44 grams ►Can be used at same time as Snap-
tablets, mobile computers, scanning devices, payment terminals, two- on accessories, including Pistol Grip
Operating Temp. -40 to +70 Degrees Celsius
way radios, navigation units, printers, and mobile phones. Environmental RoHS , REACH Compliant
Trigger Handle.

►Provides a smaller footprint for

Power Supply (PWR-
charging TC7X
Contact Info BUA5V16W0WW),
►Connects to charge contacts on
Charging Cable Cup for AC DC Line Cord (CBL-DC-383A1-
CHG-TC7X-CBL1-01 bottom of TC7X.
Wall Outlet 01) and
Office: Company Info: ►Can be used at same time as Snap-
ProClip USA, Inc. AC Line Cord (50-16000-
on accessories, including Pistol Grip
4915 Voges Road ProClip USA, Inc. provides In-Vehicle Device Mounting solutions and 182R) for charging
Madison, WI 53718 accessories. The ProClip products are custom fit for virtually every Trigger Handle.
USA model and handheld device available such as cell phones
Phone: +1 608-807-5320 smartphones, tablets, MP3 players, navigation systems, satellite
Fax: +1 920-372-0066 radios, two-way radios and mobile computing. These innovative,
MC95 Style Cradles - Email: [email protected]
these cradles are
Web: www.proclipusa.com
typically used
convenient, by and
secure customers with a solutions
easy-to-install mounting mixed install base of MC95 and TC7X devices
provide a safer and more enjoyable driving experience.

Part Number Picture Description Notes Required Items

EMC Product Line - TC7X TAG Page 10 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
 ►Allows TC7X to use existing MC95 4-
Slot cradles (4-Slot Charge Only or 4-
Slot Charge/Ethernet)
►Existing MC95 cup/cleat on the cradle
must be removed and replaced with
Adapter.
►Order four Adapters for each MC95 4-
Slot Cradle.
►TC70 Windows 10 units only capabile
of charging via 4-Slot Cradles. All
MC95 4-Slot Cradle to TC7X
ADP-TC7X-REU95-01 other TC7X configurations capable of
Adapter
7. Using T6 Torx screwdriver, secure adapter to 8. Insert the top of the TC7X into the adapter and supporting both Charging and Ethernet
amage cradle connector cradle using screw retained during removal. rotate down.
communcation.
of cradle.
►Allows existing MC95 customers to
reuse their installed base of MC95
cradles.
►NOTE: SKU is restricted sale.
Contact Zebra Product Management
with opportunity information to ensure
proper training on cradle modification
has been met prior to authorizing sale.

For Desk Mounting:

KT-116363-01R
►Uses MC95 4-Slot Charge-Only Cradle For Wall Mounting:
base along with four TC7X Adapters KT-116362-01R
MC95 Base - 4-Slot Charge
CRD-TC7X-RECO95-01 (ADP-TC7X-REU95-01).
Only Cradle
►Charges 4 terminals ►DC Line Cord (CBL-DC-
►Does not charge spare batteries. 382A1-01) and Power Supply
(PWR-BGA12V108W0WW)
►AC Line Cord (23844-00-00R
►Uses MC95 4-Slot Ethernet Charge
Cradle base along with four TC7X For Desk Mounting:
Adapters (ADP-TC7X-REU95-01). KT-116363-01R
►Allows Ethernet speeds up to 1 Gb For Wall Mounting:
►Charges 4 terminals KT-116362-01R
MC95 Base - 4-Slot Ethernet
CRD-TC7X-REEU95-01 ►Does not charge spare batteries.
and Charge Cradle
►TC70 Windows 10 units only capabile ►DC Line Cord (CBL-DC-
of charging via 4-Slot Cradles. All 382A1-01) and Power Supply
other TC7X configurations capable of (PWR-BGA12V108W0WW)
supporting both Charging and Ethernet ►AC Line Cord (23844-00-00R
communcation.

Communication Cables

Part Number Picture Description Notes Required Items

USB 2-Slot ShareCradle to

25-124330-01R ►Micro USB connection on cradle end
PC/Host cable

Power Supply (PWR-

►Attaches to rear accessory port on
BUA5V16W0WW),
Snap-on USB TC7X
DC Line Cord (CBL-DC-383A1-
CBL-TC7X-USB1-01 Communication/Charging ►Can't be used at same time as other
01) and
Cable Snap-on accessories
AC Line Cord (50-16000-
►Blocks view of rear facing camera
182R) for charging

Power Supply (PWR-

►Attaches to rear accessory port on
BUA5V16W0WW),
Snap-on Serial TC7X
DC Line Cord (CBL-DC-383A1-
CBL-TC7X-SERL1-01 Communicaiton/Charging ►Can't be used at same time as other
01) and
Cable Snap-on accessories
AC Line Cord (50-16000-
►Blocks view of rear facing camera
182R) for charging

EMC Product Line - TC7X TAG Page 11 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
 ►Attaches to rear accessory port on
TC7X
►Can't be used at same time as other
CBL-TC7X-DEX1-01 Snap-on DEX Cable
Snap-on accessories
►Does not provide device charging.
►Blocks view of rear facing camera

USB micro-A to USB A ►Allows the TC7X to act as a USB host

3rd party to connect to devices like USB flash
Female adapter
drives/memory sticks, mice, etc.
►Connects to 2-Slot USB ShareCradle

(see http://www.cyberguys.com/product-details/?productid=33062)

Snap-On Accessories

Part Number Picture Description Notes Required Items

►Reads Tracks 1, 2, & 3.

►Offers Point-to-point encryption
(P2PE) w/ Encryption for Tracks 1, 2, &
3, supporting TDES/DUKPT &
AES/DUKPT.
Snap-on Mag Stripe Reader
MSR-TC7X-SNP1-01 ►Compatible with Hand strap, Holster,
(MSR)
Charge-Only Cradles, and Charging
Cable Cups.
►NOT compatible with other snap on
accessories or USB/Ethernet cradles
►Allows access to rear facing camera

EMC Product Line - TC7X TAG Page 12 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
 ► Transforms device into all-touch handle
style terminal for use in high volume
scanning operations
► 6.4 oz weight with spring back trigger
designed for repetitive scanning.
► Trigger pull will awake device.
► Trigger can be easily removed for battery
access.
► Compatible with Holster for Trigger Handle
devices, Charge-Only Cradles, and
Charging Cable Cups.
► Integrated three point stand allows device
to be rested when not in use.
► NOT compatible with Hand Strap, other
snap on accessories or USB/Ethernet
Snap-on Pistol Grip Trigger cradles.
TRG-TC7X-SNP1-02
Handle ► NOTE: Even when Handle is removed from
TC7X, the cleat may interfere with the
device fitting into USB/Ethernet cradles.
The cleat may need to be removed when
using these cradles.
► Includes trigger handle clip/cleat that
replaces the TC7X's existing hand strap
clip.
► Now includes tether strap to prevent Pistol
Grip and Cleat from being separated.
► Now provides additional spring tension on
pistol grip to TC7X connection points.
► Can be used with Wrist Strap (50-12500-
066), although included tether strap can
also be used for this.
PRODUCT INFORMATION

► Blocks view of rear facing camera

compact trigger handle. USER GUIDE

►Simple
TISPLUS SCAN HANDLE FOR ZEBRA TC75
Trigger handle mechanically presses
the scan trigger button on the TC70 or
2. REMOVAL the PTT button on the
Push the right holder of the handle until it moves above Push
the right side of the TC75. Turn the TC75 out of the
TC75/TC70x/TC75x when the trigger
handle.
handle is pulled (PTT button requires
re-mapping to perform scan).
►TC7X snaps into place on the Handle.
23-7X-09-TG-01 ►Gun form factor allows ergonomically
(3rd party) optimized scanning position.
3. PTT-BUTTON REMAPPING ►Designed to provide comfortable
Order through ScanSource in The TIS Scan Handle balance in the hands of the user.
uses the PTT-Button
NA/EMEA or through to trigger the scan- Trigger Handle ►TC7X can be recharged in Single or
ner. Please remap the
POSPOS in APAC. PTT-Button with the Multi-Slot cradles with the trigger
following instructions:
handle installed.
1. Start Settings->Key
Programmer ►Does not block access to camera on
2. Click on “BUTTON_PTT”
3. Scroll up click on “Scan Button” back of TC7X.
4. Ready, screenshot on the right shows the re-
mapped PTT-Button for TIS Scan Handle usage ►Includes stylus holder and tether point
5. CARE
for stylus tether.
File: USER GUIDE TIS PLUS SCAN HANDLE FOR ZEBRA TC75 Stand: 5.7.2016

Do not use oil to lubricate

4. STYLUS MOUNTING the mechanism. Oil de- ►TC7X Handstrap does not need to be
For easy access to the tracts plasticizers from the
TC75 stylus the TIS removed to use with Handle.
material, the plastic parts
Scan Handle provides become brittle.
a holder for the stylus ►Handle must be removed to swap
Do not use harsh chemicals,
and a hole to mount cleaning solvents or strong
the stylus cord. The battery on device.
detergents to clean the TIS-
picture shows the PLUS Scan Handle. Clean the
TIS Scan Handle with TISPLUS Scan Handle with ►Trigger
a mechanism was designed for
http://www.tis-gmbh.de/en/ mounted stylus. damp cloth.
over 1 million pulls.
© TIS GmbH 2016 – Subject to changes and amendments, errors excepted Müller-Armack-Str. 8 | 46397 Bocholt | www.tis-gmbh.com | [email protected] | +49 2871 2722-0 2
►Provides 3.5mm barrel jack connector
►Audio jack is at the end of a 3.5"
pigtail cable extending from the rear of
the adapter.
►Features Internal sealing and Rubber
sealing to reduce connector corrosion
Snap-on Audio Adapter and jack exposure. Ability to attach
ADP-TC7X-AUD35-01
(3.5mm jack) without removing hand strap and no
need to detach to access the battery.
Camera, Flash and IRDA window
exposed.
►NOT compatible with other snap on
accessories or USB/Ethernet cradles
►Allows access to rear facing camera.

EMC Product Line - TC7X TAG Page 13 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
 ►Provides 3.5mm barrel jack connector
that is keyed/collared for a locking
failsafe connection with matching
cables and headsets.
►Audio jack is at the end of a 3.5"
pigtail cable extending from the rear of
the adapter.
►Features Internal sealing and Rubber
sealing to reduce connector corrosion
Snap-on Audio Adapter and jack exposure. Ability to attach
KIT-TC7X-AUDL35-01 (3.5mm jack) with Retention without removing hand strap and no
and Anti-Rotation Lock/Clip need to detach to access the battery.
Camera, Flash and IRDA window
exposed.
►NOT compatible with other snap on
accessories or USB/Ethernet cradles
►Allows access to rear facing camera.
►Includes Snap-on 3.5mm Audio
Adapter (ADP-TC7X-AUD35-01) and
Retention/Anti-Rotation Lock (ADP-
LOCK-3.5HT1-01)

► Provides Real-Time Location

23-7X-09-TSO-01 System (RTLS) tracking of the TC7X
(for Agilion) from various RTLS application
providers.
23-7X-09-TSO-02 ► Transponder is powered from the
(for Solcon)
TC7X
TIS snap-on RTLS
23-7X-09-TSO-03
► Does not block access to camera.
Transponder
(for Ubisense) ► TC7X can still be docked in Charge-
Only cradles and will also work with
(3rd party) TIS Snap-on Pistol Grip Trigger
Handle (23-7X-09-TG-01)
► LED on snap-on indicates
transponder is being powered.

http://tis-gmbh.de/en

Misc

Part Number Picture Description Notes Required Items

►TC7X Rigid Holster w/ snap in Design

to accommodate hand strap and Snap-
ons (e.g. MSR) for easy
SG-TC7X-RHLSTR1-01 Rigid Holster insertion/removal
►Rotating Belt Clip with ability
to insert in either direction.
►NOT compatible with Trigger Handle

EMC Product Line - TC7X TAG Page 14 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
 ►Vertical orientation with Open Bucket
design to accommodate hand strap
and Snap-ons such as the MSR for
easy insertion and removal.
►Includes Loop and tether point for
optional stylus.
SG-TC7X-HLSTR1-02 Soft Holster ►Non rotating for maximum durability.
►Opening at bottom of holster for
providing drainage and route for audio
from device's speaker.
►Uses improved materials vs. SG-TC7X-
HLSTR1-01

TM-CTC70
(3rd party) ►Includes D ring and hand strap
TC7X Case
►Provides access to camera

http://www.taylormadecases.com

►Holsters TC70 units using Trigger

Handle (TRG-TC7X-SNP1-01)
►Made with durable easy care Ballistic
AC1755DWSP nylon
(3rd party) ►Belt loop designed for left or right
Holster for TC7X with Snap-
handed users
On Trigger Handle
►Exterior pocket holds spare battery
►Drain hole in case of inclement
weather

http://www.ultimacase.com

EMC Product Line - TC7X TAG Page 15 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
TM-CTC70G
(3rd party) Case for TC7X with Pistol ►Full access to touch screen
Grip Trigger Handle ►Includes D ring

http://www.taylormadecases.com

TM-HUTC70
(3rd party) Holster for TC7X with Pistol ►Includes slide clip on back and small
Grip Trigger Handle front elastic pocket.

http://www.taylormadecases.com

TM-WS-TC70
(3rd party) ►Allows TC7X to be worn as a
Wrist Mount Holster wearable device.
►Full access to touch screen

http://www.taylormadecases.com

(3rd party)

Additional Cases & Holsters

for TC7X

http://www.ultimacase.com

http://www.taylormadecases.com

EMC Product Line - TC7X TAG Page 16 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
 ►Leather and Hypalon Pad for
maximum comfort & wear resistance
►Adjustable Velcro design provides
comfort to support a wide range of
hand sizes whiles resisting wear in
SG-TC7X-HSTR2-03 rugged environments.
Replacement Handstraps
(pack of 3) ►Also provides a loop and tether point
for the optional stylus.
►Plastic Clip latches into terminal for
easy insertion and removal.
►Has improved handstrap materials vs.
SG-TC7X-HSTRP1-03

►Allows unit to be attached to a

retractable lanyard.
►Lanyard can be worn cross-body
using included strap or strap can be
removed and lanyard can be attached
to belt.
►Standard TC7X handstrap must be
removed to allow lanyard to be
attached.
►Not compatible with TC7X Pistol Grip
trigger handle.
SG-MC33-LNYDB-01 Lanyard ►Can be used with Belt Holster (11-
08062-02R)

►Belt is 2 inches wide

►Extends to 48 inches
11-08062-02R Belt for holster
►Has improved buckle and softer belt
material

V6198DW (3rd party) ►Used to extend the holster belt (11-

Belt Extender
http://www.ultimacase.com 08062-02R) an additional 10 inches

EMC Product Line - TC7X TAG Page 17 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
 ►Attaches under battery and provides
attachment point for the Snap-on Pistol
Grip Trigger Handle (TRG-TC7X-SNP1-
02)
►Includes Handstrap (tether strap) to
prevent Pistol Grip and Cleat from
ADP-TC7X-CLHTH-10 Replacement Cleats and being separated.
(pack of 10) Handstrap for Trigger Handle ►One Cleat and Handstrap is normally
included with each Trigger Handle
►NOTE: Use of this cleat may interfere
with the device fitting into
USB/Ethernet cradles. The cleat may
need to be removed when using these
cradles.

►Attaches to bottom of Snap-on Pistol

Grip Trigger Handle (TRG-TC7X-SNP1-
50-12500-066 Wrist Strap for Trigger Handle
01)

►Includes fine-pitch, capacitive Stylus

(SG-TC7X-STYLUS1-03) and coiled
tether (KT-TC7X-TETHR1-03)
►Conductive Carbon-filled plastic
material w/ 5mm tip.
►Length of stylus is 3.5".
SG-TC7X-STYLUS-03 ►Rigid plastic stylus is optimized for
Stylus Kit with Tether enterprise durability.
(pack of 3)
►Clip & tether point to reduce loss.
Tether to Handstrap
►When not being used stylus can be
stored in loop on Handstrap or in the
optional Holster

►Conductive Carbon-filled plastic

material w/ 5mm tip
►Rigid plastic stylus is optimized for
SG-TC7X-STYEX1-3 enterprise durability.
Extended Length Stylus
(pack of 3) ►Clip & tether point to reduce loss.
►When not being used stylus can be
stored in optional Holster

SG-ET5X-SLTETR-01 Coiled Tether for Stylus

►For Push-To-Talk (PTT) and VoIP

telephony
►Uses 3.5mm rugged jack that is
keyed/collared for a locking failsafe
TC7X Snap-on Audio Adapter
connection.
PTT and VoIP Headset (3.5mm jack) with retention
HDST-35MM-PTVP-01 ►Rotating earpiece allows for right or
(3.5mm jack) and anti-rotation lock (KIT-
left ear configuration
TC7X-AUDL35-01) 
►Built-in cord wrap
►mono with microphone
►includes clip for attaching PTT button
to clothing.

EMC Product Line - TC7X TAG Page 18 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
 ►For Push-To-Talk (PTT) and VoIP
telephony
►2.5 mm jack
►Rotating earpiece allows for right or
left ear configuration
►Built-in cord wrap 2.5mm Snap-on Audio
PTT and VoIP Headset
HDST-25MM-PTVP-01 ►mono with microphone Adapter (ADP-TC7X-AUDIO1-
(2.5mm jack)
►includes clip for attaching PTT button 01)
to clothing.
►Recommend using 3.5mm headset
(HDST-35MM-PTVP-01) instead since
this feature a more secure locking jack
connector.
►Built to handle the everyday inevitable
drops
►Dustproof, sprayproof and waterproof HS2100 to 3.5mm Standard
►Ready for the freezer and outdoor Cable (CBL-HS2100-3MS1-
subzero temperatures 01)
►Feather-light for extraordinary comfort AND
►Noise cancellation for a superior voice TC7X Snap-on Audio Adapter
experience in the noisiest (3.5mm jack) with retention
See HS2100-HS3100 HS2100 Rugged Wired environments and anti-rotation lock (KIT-
Accessories Document Headset ►Detachable swivel boom minimizes TC7X-AUDL35-01) 
costs.
►Swivelling boom mutes microphone
allowing uses to prevent voice pick See HS2100/HS3100
applications from recognizing non-voice Accessories Document for
pick conversations. additional headset
►User-replaceable pads and accessories
windscreens maximize comfort and
hygiene
►For VoIP use only, not Push-To-Talk Option 1
(PTT) TC7X Snap-on Audio Adapter
►Improved to withstand chemicals in (3.5mm jack) with retention
certain hair gels and anti-rotation lock (KIT-
►Noise cancelling microphone filters TC7X-AUDL35-01) 
ambient noise inches away AND
►Extremely rugged strain relief features Quick Disconnect Headset
ensure cable bend tolerance, even at - Adapter Cable (ADP-35M-
RCH51 Rugged Cabled Headset 30C QDCBL1-01)
►IP67 sealing throughout the headset
protects sensitive components from Option 2
moisture and dust 2.5mm Snap-on Audio
►High-strength plastics survive 6’ drop Adapter (ADP-TC7X-AUDIO1-
at -30C & 500 tumbles 01)
►Weight: 4 oz. AND
►See RCH50/RCH51 Accessories Quick Disconnect Adapter
Document for additional accessories. Cable (25-124387-02R)
Option 1
TC7X Snap-on Audio Adapter
►Audio accuracy for voice picking and
(3.5mm jack) with retention
other speech recognition applications.
and anti-rotation lock (KIT-
►High quality durability stands up to all-
TC7X-AUDL35-01) 
day, every-day use.
VXi VR12 Wired Noise AND
3PTY-VXI-VR12 ►Lightweight design is easy and
Cancelling Headset Quick Disconnect Headset
comfortable to wear all day.
Adapter Cable (ADP-35M-
(Zebra orderable SKU) ►Compatible with most major wearable
QDCBL1-01)
computers and devices used in voice-
picking environments.
Option 2
►G type (GN Netcom) Quick
2.5mm Snap-on Audio
Disconnect.
Adapter (ADP-TC7X-AUDIO1-
►Convertible design gives choice of
01)
over-the-head and behind-the-neck
AND
wearing styles
http://www.vxicorp.com Quick Disconnect Adapter
Cable (25-124387-02R)

EMC Product Line - TC7X TAG Page 19 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
 ►HD Voice, also known as Wide Band
Audio, brings incredible audio clarity
►Built to handle the everyday inevitable
drops
►Dustproof, sprayproof and waterproof
►Ready for the freezer and outdoor
subzero temperatures
►Feather-light for extraordinary comfort
►Noise cancellation for a superior voice
experience in the noisiest
environments
►Swap batteries on the fly — without See HS2100/HS3100
See HS2100-HS3100 HS3100 Rugged Bluetooth
losing the Bluetooth connection Accessories Document for
Accessories Document Headset
►Split-second tap-to-pair simplicity headset accessories
using NFC.
►Detachable swivel boom minimizes
costs.
►Swivelling boom mutes microphone
allowing uses to prevent voice pick
applications from recognizing non-voice
pick conversations.
►User-replaceable pads and
windscreens maximize comfort and
hygiene
►15 hours of battery power
►Used to enable Voice Directed Picking
3PTY-VXI-B250XTP  (VDP) or Speech Applications in
VXi BlueParrott Bluetooth
warehouse environments when the use
Headset for voice directed
(Zebra orderable SKU) of a wireless headset is desired
applications
►Not intended to support peer-to-peer
communications (PTT) or VoIP calls
►Allows the use of other BT devices
http://www.vxicorp.com
(i.e. RS6000 scanner or mobile printer)

►Used to enable Voice Directed Picking

3PTY-VXI-EXPWAYII  VXi BlueParrott Bluetooth (VDP) or Speech Applications in
Headset for voice directed warehouse environments when the use
(Zebra orderable SKU) applications of a wireless headset is desired
►Not intended to support peer-to-peer
communications (PTT) or VoIP calls
►Allows the use of other BT devices
(i.e. RS6000 scanner or mobile printer)

http://www.vxicorp.com

►3.5mm barrel jack connector

►For use with TC7X, TC8000, or other
devices using a 3.5mm barrel jack
TC7X Snap-on Audio Adapter
audio connector
HS2100 Headset Standard (3.5mm jack) with retention
CBL-HS2100-3MS1-01 ►Cable is 43" (1.1 M) long
Cable (3.5 mm jack) and anti-rotation lock (KIT-
►Rugged cable with rugged connectors
TC7X-AUDL35-01) 
that are keyed for failsafe connectivity
►Includes one clothing clip. Additional
clips can be purchased separately.

►Connects RCH50/RCH51 headset to

devices with standard 3-pole 2.5mm 2.5mm Snap-on Audio
RCH50/RCH51 Headset
25-124387-02R barrel jack connector. Adapter (ADP-TC7X-AUDIO1-
Adapter Cable
►Updated cable minimizes cross talk 01)
and intermittency issues.

EMC Product Line - TC7X TAG Page 20 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
 ►Connects RCH50/RCH51 headset (or
headsets with Quick-Disconnect
TC7X Snap-on Audio Adapter
RCH50/RCH51 Quick connector) to devices with 3-pole
(3.5mm jack) with retention
ADP-35M-QDCBL1-01 Disconnect Headset Adapter 3.5mm barrel jack connector.
and anti-rotation lock (KIT-
Cable ►Cable features a rugged
TC7X-AUDL35-01) 
keyed/collared jack for a locking
failsafe connection.

►This clip is used with the Snap-on

3.5mm Audio Adapter (ADP-TC7X-
AUD35-01) and keyed headset cables
to prevent cable rotation/spinning and
also to provide a secure, reliable
3.5mm Audio Adapter
headset connection.
ADP-LOCK-3.5HT1-01 Retention and Anti-Rotation
►Clip is normally included with Snap-on
Lock
3.5mm Audio AdapterKIT (KIT-TC7X-
AUDL35-01).
►NOTE: This is a Spare/Service Parts
item. Contact an authorized Zebra
reseller to order.

SG-TC7X-SCRNTMP-01 Tempered Glass Screen ►Compatible with TC70x/TC75x series

(single) Protector only (not TC70/TC75 series)

Power Cords/Power Supplies

Part Number Picture Description Notes Required Items

►Used along with Power Supply PWR-

BGA12V50W0WW to power 2-Slot
CBL-DC-388A1-01 DC Power Cord Cradle and SACX000 4-Slot Battery
Charger.
►Cable length is 1.8 meters

►Used to power 2-Slot Cradle and

SACX000 4-Slot Battery Charger.
DC Line Cord (CBL-DC-388A1-
►100-240 VAC,12V, 4.16A, 50W
PWR-BGA12V50W0WW Power Supply 01) and AC Line Cord (23844-
►Provides US DOE Level VI
00-00R)
compliance for power efficiency.
►Replaces PWRS-14000-148R

►Includes Power Supply (PWR-

KIT-PWR-12V50W Power Supply Kit BGA12V50W0WW) and DC Line Cord AC Line Cord (23844-00-00R)
(CBL-DC-388A1-01)

EMC Product Line - TC7X TAG Page 21 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
 ►Used to power Snap-On USB/Charge
Cable with Power Supply PWR-
CBL-DC-383A1-01 DC Line Cord
BUA5V16W0WW
►Cable length is 6 ft.

►Used with Charging Cable Cup,

Serial/Charge Cable, and USB/Charge DC Line Cord (CBL-DC-383A1-
Cable Cups 01)
PWR-BUA5V16W0WW Power Supply ►100-240VAC, 5.4V, 3A, 16W and
►Meets US DOE Level VI efficiency AC Line Cord (50-16000-
standard 182R)
►Replaces PWRS-14000-249R
►Used to power 5-Slot ShareCradles
when using Level VI Efficiency power
supply (PWR-BGA12V108W0WW)
►This cable does not include the black
CBL-DC-381A1-01 DC Power Cord extension release latch which is not
required when used on Multi-Slot
ShareCradles.
►CBL-DC-382A1-01 is still typically
used though.

►Used with Power Supply PWR-

CBL-DC-382A1-01 DC Power Cord BGA12V108W0WW to power 5-Slot
ShareCradles.

►Used to power Four Slot Cradles

►100-240 VAC, 12V, 9A, 108W
CBL-DC-382A1-01 and 23844-
PWR-BGA12V108W0WW Power Supply ►Provides US DOE Level VI
00-00R
compliance for power efficiency.
►Replaces PWRS-14000-241R

23844-00-00R AC Line Cord Used to power Cradles

Used with 50-14000-147R/50-14000-

249R/PWRS-14000-249R/PWR-
50-16000-182R AC Line Cord
BUA5V16W0WW to power Snap-on
charging cables

Batteries

Part Number Picture Description Notes Required Items

EMC Product Line - TC7X TAG Page 22 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18
 ►Recommended for use in TC70/TC75
series only.
- If used in TC70x/TC75x battery will
not give an accurate reading of the
capacity or the state of health. For all
TC70/TC75 Spare 1X Battery charge levels the battery capacity
with PowerPrecision indicator will read 50% (see PMB
(4620 mAh) 2863).
►Designed, manufactured & tested to
BTRY-TC7X-46MAH-01
meet rigorous controls & standards
(single)
►Premium-grade cells with higher
BTRY-TC7X-46MAH-10
capacity & longer life cycle
(10 pack)
►Designed to help prevent
overcharging & electrical shock
►Strong & robust housing for optimal
performance & durability
►Information available:
- Available charge status
- Total charge accumulated on the
battery
- Basic state of health
►Recommended for use in
TC70x/TC75x series. Blue label on
battery distinguishes from TC70/TC75
series battery (BTRY-TC7X-46MAH-01 /
BTRY-TC7X-46MA2-01).
►Battery is also compatible with
TC70/TC75 series units. Note that
TC70x/TC75x Spare 1X Spare Battery Chargers designed
Battery with PowerPrecision specifically for the TC70/TC75 series
Plus (4620 mAh) will not charge this battery and may
cause damage to the battery (see PMB
BTRY-TC7X-46MPP-01
2863).
(single)
►Designed, manufactured & tested to
BTRY-TC7X-46MPP-10
meet rigorous controls & standards
(10 pack)
►Premium-grade cells with higher
capacity & longer life cycle
►Designed to help prevent
BTRY-TC7X-46MPPBR
overcharging & electrical shock
(for use in Brazil)(single battery)
►Strong & robust housing for optimal
BTRY-TC7X-46MPP-IN
performance & durability
(for use in India)(single battery)
►Information available:
- Advanced state of Charge (shows the
remaining battery power based on two
factors: present charge and present
real-time usage patterns of the device.
- Advanced State of Health (highly
accurate end-of-life prediction)
- Dynamic usage patterns are
constantly calculated, factoring in
criteria such as the applications that
are in use and scanning frequency).

EMC Product Line - TC7X TAG Page 23 of 23

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/9/18