IT T Wastewater

Goulds Pumps
WS_D3 Series Model 3888D3
Submersible Sewage Pump Features
■ Impeller: Cast iron, ASTM A48, Class 30,
two vane semi-open, non-clog design
with pump out vanes for mechanical seal
protection. Balanced for smooth operation.
Silicon bronze impeller is an option.
■ Casing: Heavy duty gray cast iron, ASTM
A48, Class 30. Volute type casing with 3",
125#, ANSI flanged, horizontal discharge.
Compatible with A10-30 cast iron or A10-
30B cast iron and brass (non-sparking)
guide rail assembly.
■ Dual Mechanical Seals: Silicon carbide
vs. silicon carbide outer seal and ceramic
vs. carbon inner seal, stainless steel metal
parts, BUNA-N elastomers. Upper and lower
shaft seals are positioned independently
and are separated by an oil-filled chamber.
■ Shaft: 300 series stainless steel keyed
design.
■ Fasteners: 300 series stainless steel.
■ Capable of running dry temporarily with­out
damage to seals or motor.

Goulds Pumps is a brand of ITT Water Technology, Inc.

- a subsidiary of ITT Industries, Inc.

www.goulds.com

Engineered for life

IT T GOULDS PUMPS
Wastewater

APPLICATIONS Three Phase:

Used in a variety of residential, commercial and industrial • 1.5 - 5 HP; 200, 230, 460 and 575 volts
applications such as: • Class 10 overload protection must be provided in
• Sewage systems, Flood and Pollution Control, Dewa- control panel
tering/Effluent, Farms, Hospitals, Trailer Courts, Motels motors
Specifications ■ Fully submerged in oil-filled chamber. High grade turbine
Pump: oil surrounds motor for more efficient heat dissipation,
• Maximum solid size: 2.5” permanent lubrication of bearings and mechanical seal for
• Discharge size: 3”, 125 # ANSI flange complete protection against outside environment.
• Maximum capacity: 470 GPM ■ Class F insulation.
• Maximum total head: 65 feet ■ Designed for Continuous Operation: Pump ratings
• 300 Series stainess steel fasteners are within the motor manu­facturer’s recommended
• 20’ Power cord working limits and can be operated continuously without
• Standard silicon carbide/silicon carbide outer seal damage when fully submerged.
Motor: ■ Bearings: Upper and lower heavy duty ball bearing
• Maximum ambient temperature: 104º F (40º C) construction for precision positioning of parts and to carry
continuous duty, 140º F (60º C) intermittent duty thrust loads.
• Rated for continuous duty when fully submerged ■ Power Cable: Severe duty rated, oil and water resistant.
• Insulation: Class F Epoxy seal on motor end provides secondary moisture
• 60 Hertz barrier in case of outer jacket damage and to prevent oil
• Single row ball bearings wicking. 20 foot standard with optional lengths available.
• 300 Series stainless steel keyed shaft ■ O-ring: Assures positive sealing against contaminants and
Single Phase: oil leakage.
• 1.5 - 5 HP; 208 and 230 volts AGENCY LISTINGS
• Built-in thermal overloads with automatic reset Tested to UL 778 and CSA 22.2 108 Standards
• Built-in capacitors ® By Canadian Standards Association File #LR38549
C US Goulds Pumps is ISO 9001 Registered.

model AND MOTOR INFORMATION

Impeller Maximum L.R. KVA Power F.L. Motor Resistance Wt.
Order No. HP Phase Volts RPM
Dia. (in.) Amps Amps Code Cable Efficiency % Start Line-Line (lbs.)
WS1518D3M 208 15.0 50.8 B 80 1.1 0.9
192
WS1512D3M 1 230 12.5 29.5 E 14/3 70 1.4 1.8
WS1538D3M 200 11.5 40.9 H 81 1.7
WS1532D3M 1.5 230 1750 5.25 10.0 40.0 F 83 2.3
3 14/4 NA 190
WS1534D3M 460 5.0 20.0 F 83 9.3
WS1537D3M 575 4.0 14.4 H 74 14.8
WS1518D3 208 15.0 50.8 B 80 1.1 0.9
1 14/3 192
WS1512D3 230 12.5 29.5 E 70 1.4 1.8
WS1538D3 200 11.5 40.9 H 81 1.7
WS1532D3 1.5 230 1750 6.50 10.0 40.0 F 83 2.3
WS1534D3 3 460 5.0 20.0 F 14/4 83 NA 9.3 190
WS1537D3 575 4.0 14.4 H 74 14.8
WS2018D3 208 19.0 50.8 B 80 1.1 0.9
1 14/3 196
WS2012D3 230 16.0 36.9 D 75 1.4 1.5
WS2038D3 200 11.5 40.9 H 81 1.7
WS2032D3 2 230 1750 7.00 10.0 40.0 F 83 2.3
3 14/4 NA 194
WS2034D3 460 5.0 20.0 F 83 9.3
WS2037D3 575 4.0 14.4 H 74 14.8
WS3018D3 208 25.5 50.8 B 80 1.1 0.9
WS3012D3 1 230 21.5 46.4 C 10/3 79 1.0 1.0 205
WS3038D3 200 15.2 53.8 G 10/4 85 1.3
WS3032D3 3 230 1750 7.25 12.0 49.5 H 83 1.9
WS3034D3 3 460 6.0 24.8 H 14/4 83 NA 7.5 200
WS3037D3 575 4.8 17.3 G 78 11.6
WS5012D3 1 230 26.5 57.7 A 10/3 80 1.0 0.8 210
WS5038D3 200 18.8 73.9 F 84 0.9
WS5032D3 5 230 1750 8.00 16.4 63.6 E 10/4 85 1.2
WS5034D3 3 460 8.2 31.8 E 85 NA 4.8 205
WS5037D3 575 6.8 22.8 E 14/4 80 7.4

IT T GOULDS PUMPS
Wastewater

materials of construction
Item Material
66 Part Name
No. Standard Optional
1 Impeller, non-clog 1003 1179
22 2 Castings 1003
44 55 3 Shaft–keyed 300 Series SS
4 Fasteners 300 Series SS
33 77
22 5 Ball bearings Steel
22
88 6 Power cable STOW, 20 feet Additional lengths
11 7 O-ring BUNA-N
Outer Mech. Metal
Service Rotary Stationary Elastomers
22 Seal Parts
Silicon Tungsten 300 Series
8 OPT Heavy duty BUNA-N
Carbide Carbide SS
Mild 300 Series
STD Silicon carbide
abrasives BUNA-N SS

PERFORMANCE RATINGS (Gallons Per Minute)
Material Code Engineering Standard
Series No. WS15D3M WS15D3 WS20D3 WS30D3 WS50D3
▲ ▲ ▲

1003 Cast iron — ASTM A48 Class 30

HP 11⁄ 2 11⁄2 2 3 5
1179 Silicon bronze — ASTM C87600
RPM 1750
10 160 300
15 90 260 320
20 210 280 350 435
25 160 235 310 400
Feet of Water
Total Head

30 100 185 265 360

35 130 210 325
40 60 160 280
45 100 230
50 170
55 115
60 60

METERS FEET
70
SERIES WS–D
0 SIZE .5" SOLIDS
RPM 1750
WS HP VARIOUS
60 50D


50
WS 10 GPM
15 0D

TOTAL DYNAMIC HEAD

 FT
WS
40 0D

WS
10 15D

0

0
WS1
5 5D
M

10

0 00 50 100 150 00 50 00 50 400 450 500 U.S. GPM
0 0 40 60 80 100 10 m/hr
FLOW RATE

IT T Wastewater

application data and CONSTRUCTION DETAILS

Maximum Solid Size 2.5"
Minimum Casing Thickness 5
⁄16"
Casing Corrosion Allowance 1
⁄8"
Maximum Working Pressure 30 PSI
Maximum Submergence 50 feet
Fully submerged for continuous operation
Minimum Submergence
6" below top of motor for intermittent operation
Maximum Environmental Temperature 40º C (104º F) continuous operation, 60º C (140º F) intermittent operation
Type SJTOW: single phase, 11⁄2 and 2 HP
Power Cable – Type
Type STOW: single phase, 11⁄2 – 3 HP and 5 HP, 460 V
(See Motor Information for AWG data/size.)
Type STOW: single phase, 3 and 5 HP, three phase 5 HP, 230 V
Motor Cover, Bearing Housing, Seal Housing, Casing Gray Cast Iron – ASTM A48, Class 30
Impeller – Standard, Optional Gray Cast Iron – ASTM A48 or Cast Bronze – ASTM B584 C87600
Motor Shaft AISI 300 Series Stainless Steel
Motor Design NEMA 56 Frame, oil filled with Class F Insulation
Single phase: on winding thermal overload protection auto reset
Motor Overload Protection
Three phase: requires Class 10 overloads in control panel
External Hardware 300 Series Stainless Steel
Impeller Type Semi-open with pump out vanes on back shroud
Oil Capacity – Seal Chamber 1.5 quarts
Oil Capacity – Motor Chamber 1½-5 HP single and three phase: 7 quarts
Upper Carbon/Ceramic; Type 21
Mechanical Seals – Standard
Lower Silicon Carbide/Silicon Carbide; Type 31
Mechanical Seals – Optional Lower Silicon Carbide/Tungsten Carbide; Type 31

dimensions
(All dimensions are in inches. Do not use for construction purposes.)

ROTATION

27.62" 12"
3" 125 #
ANSI FLANGE
9.5"
15.5"
6.38"
KICKBACK
3.5"

Goulds Pumps and the ITT Engineered Blocks Symbol are

registered trademarks and tradenames of ITT Industries Inc.
SKF is a registered trademark of Aktiebolaget SKF, Sweden.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

B3888D3 March, 2006

© 2006 ITT Water Technology, Inc.

Engineered for life