NX PIT-TYPE FURNACES
The NX Turnkey Nitriding/Nitrocarburizing
System features a selection of medium to very large
heavy-duty NX pit furnaces, a Nitrex control system,
process controller with specialized software and poten-
tial-controlled nitriding technology known as NITREG®
and its derivatives.
ADVANCED FURNACE DESIGN
The NX furnace is designed to operate in a totally
automatic fashion as part of a Nitrex turnkey nitriding
system. All phases of the process such as purging,
heating, nitriding, and cooling are accomplished in one
uninterrupted cycle. *AMS 2759/12
The retort furnace is equipped with an internal recircu- compliance optional
lation fan and a cooling air blower. A specially designed
retort and heating elements guarantee long and
reliable service. The hot gas recirculation fan provides
fast load heat-up rate and guarantees excellent tem-
perature and nitriding uniformity necessary for good PROCESS CONTROL
repeatability. The closed-loop process control enables the system
to respond automatically to the changes in nitriding
conditions that occur during the process cycle.
The furnace’s main features are:
The Nitrex process controller continuously receives
• Separate heating zones for accurate temperature
data from the furnace atmosphere sensors and ad-
control.
justs the process parameters in order to maintain the
• Light ceramic fiber insulation for fast and efficient preset value of the nitriding potential.
heating as well as cooling
The control software also includes a powerful process
• Kanthal A-1 heating elements builder menu along with troubleshooting, emergency
• Retort made of refractory alloy and calibration menus to aid the user in maintaining
• Silicone cover seal for gas tight retort and operating the nitriding installation.
• Furnace locking ring (with actuator for larger fur-
nace sizes)
• Actuated cover lifting device PROCESS TECHNOLOGY
The NITREG® family of technologies offers individually
• Easy servicing and maintenance
customized processes for different applications and
materials with desired and repeatable results.
COOLING OPTION
An accelerated cooling system is available that can sub-
stantially reduce cooling time compared to conven-
tional cooling. This results in a shorter total process
time and an improved utilization rate of the furnace. Nitreg® Potential controlled gas nitriding
Nitreg®-C Potential controlled nitrocarburizing
Cooling Coil
Option
Nitriding of stainless steels &
Nitreg®-S
nickel-based alloys
Nitreg®-Ti Nitriding of titanium alloys
In-process post-nitriding or
ONC®
post–nitrocarburizing oxidation
Nitriding of stainless steels with no
Nano-STM
loss of corrosion resistance
NX PIT-TYPE FURNACES
Standard models*
Rack Size
Load Furnace Furnace Required Min. Height
Model
Diameter Height Capacity Diameter Height Pit Depth Clearance
(A) (B) (C) (D) (E) (F)
NX-615 23½” 59” 2200 lbs 58” 116” 59” 128”
NX-620 23½” 78¾” 2600 lbs 58” 136” 79” 148”
NX-815 31½” 59” 3300 lbs 66” 112” 59” 128”
NX-820 31½” 78¾” 3850 lbs 66” 135” 79” 149”
NX-825 31½” 98½” 4400 lbs 66” 155” 98” 168”
NX-1015 39” 59” 4400 lbs 74” 116” 59” 128”
NX-1020 39” 78¾” 5500 lbs 74” 136” 79” 148”
NX-1025 39” 98½” 6600 lbs 74” 156” 98” 168”
NX-1215 47¼” 59” 6600 lbs 86” 116” 59” 128”
NX-1220 47¼” 78¾” 8400 lbs 86” 136” 79” 148”
NX-1225 47¼” 98½” 9900 lbs 86” 156” 98” 168”
NX-1230 47¼” 118” 11,570 lbs 86” 175” 118” 187”
NX-1625 61” 98½” 13,200 lbs 94” 157” 98” 174”
NX-1630 61” 118” 15,400 lbs 94” 185” 118” 190”
NX-1635 61” 137¾” 17,600 lbs 94” 204” 138” 209”
NX-1645 61” 177” 22,000 lbs 94” 244” 177” 249”
Copyright © Nitrex Metal Inc. (Broc030 rev 8). Nitrex Metal reserves to right to make changes without notice.
* For non-standard sizes, please contact Nitrex for details
Dia.
Dia.
A
F C
D
E
NORTH AMERICA POLAND CHINA
T: +1-514 335 7191 T: +48 32 296 6630 T: +86 (0) 10 6257 3050
F: +1 514 335 4160 F: +48 32 296 6620 F: +86 (0) 10 6252 9914
[email protected] [email protected] [email protected] www.nitrex.com
