AutoCAD P&ID Basic Course

Course description
In this 1-day basic course will teach you and Process Piping diagrams generate using AutoCAD P &
ID, the new way to generate P & ID Autodesk Plant Solutions. During the course the user will not only
address the easy to use user interface, but will also be considerable attention paid to the Project
Manager and Data functions. These two features allow users to very large potential for modifying and
adding information, but also to generate reports, complete central project data and publish an entire
project.

Basics
The student is expected to have basic knowledge of AutoCAD, any experience with AutoCAD is
desirable for better understanding of the opportunities in AutoCAD P & ID. Knowledge of Process
Piping and schedules is recommended but not required, however it makes the course easier to follow
if the student has some knowledge of the process industry.

Duration
The course will take 1 day, during days, the necessary topics needed to generate schedules and
Process Piping. Also, during the course to be taken deeper into the Project Manager and Data, as
these two features are an essential part of AutoCAD P & ID. After each chapter, the trainee will
develop an exercise, allowing the participant to be considered after the course AutoCAD P & ID to
work during daily activities.

Course Content
During this one day course covers the following topics:

• Introduction to AutoCAD P & ID • Annotations on the P & ID, automatic and manual
• AutoCAD P & ID Graphical User • Manage projects in AutoCAD P & ID 
Interface • Communicate with contractors and third parties (internal /
• Some basic AutoCAD commands  external) 
• Installation and connection of Equipment • Managing data with AutoCAD P & ID Data Manager
• Valves and other components • Import and export data
• Instrumentation • Convert standard AutoCAD symbols
• Non-engineering items • Publication of P & IDs
• Modifying existing schemes
• Validating a P & ID

Advanced course (s)

After completing this course, students can further develop by following the example of AutoCAD P &
ID Advanced Course .
 AutoCAD P&ID Advanced Course

Course description
In this 2-day advanced course teaches you how AutoCAD P & ID business you manage, monitor and
implement. During this course a lot of emphasis on the refurbishment of AutoCAD P & ID
environment, which includes the creation of AutoCAD P & ID symbols, annotations, project settings
and standards. After this 2 day course the student is able to AutoCAD P & ID environment to modify
and add components including all the necessary settings.

Basics
To participate in this course has extensive knowledge and experience with modifying an AutoCAD
environment is recommended. Knowledge and experience in generating Piping and instrumentation
diagrams is recommended but not required.

Duration
The course lasts two days, which will be extensive information on the necessary functions such as
setting up templates and creating AutoCAD P & ID objects. It also will provide more detail on the
capabilities and settings on the Project Manager and Data as its own properties, selection lists, and
reporting templates. Each chapter will end with an exercise, so the trainee after the training, will have
the AutoCAD P & ID environment to adapt and expand to the required company standard.

Course Content
During this 2 day course covers the following topics:

• Introduction to AutoCAD P & ID system maintenance • Basic knowledge of dynamic blocks

• Creating an AutoCAD P & ID Template • Equipment and inline symbols
• Title blocks and frameworks • Special and non-engineering items
• Fields and Attributes in AutoCAD P & ID • Create and add annotations and tags
• File structure of major P & ID files  • Create and add line types and styles 
• Create reference projects • Company-specific reports and selection lists
• Auto generate numerical  • Adding properties and fields
• Create your own company symbols  • Tables and Fields

Advanced course (s)

After completing this training is still possible for the student to further develop by following a
customized training. For more information please contact us.
AutoCAD P&ID with SQL

Course description
This one day intensive course teaches you how AutoCAD P & ID with a SQL database can
link. AutoCAD P & ID by linking with SQL opens a new range of possibilities. To set up not only the
information from AutoCAD P & ID available for the rest of your organization, but you'll also have the
option of report-generation software to generate reports based on the information in the SQL
database.

Basics
The student has no specific knowledge of databases, some work experience with AutoCAD P & ID is
desirable to better understand the capabilities of AutoCAD P & ID combined with a
database. Knowledge of databases is recommended but not required, however it makes the course
easier to follow if the student has some knowledge of the possibilities that a database can provide.

Duration
The course will take 1 day, during those days, the necessary topics needed to link AutoCAD P & ID
with SQL.Also during the course will be taken deeper into Database maintenance and changing
information in the database. The course will make use of practical exercises that clarify the use of a
database.

Course Content
During this one day course covers the following topics:

• Introduction to AutoCAD P & ID • Database Structure of P & ID Project

• AutoCAD P & ID Architecture • identify changes in SQL
• Properties and Smart Tags • Additions recognize SQL
• Introduction to SQL Databases • Security for a Database Setting
• Tables and Views • Compact and SQL database maintenance
• SQL link with AutoCAD P & ID • Change information in the SQL Database
• New SQL Project Start • The drawing with Database Update Information

Advanced course (s)

After completing this course, students can further develop by following the example of AutoCAD P &
ID with Crystal Reports training . 
AutoCAD P&ID with Crystal Reports

Course description
This one day intensive course will teach you how to use Crystal Reports generating reports based on
information that AutoCAD P & ID in a SQL database stores. You are familiar with working with Crystal
Reports, data from a database to select and organized manner to display. Emphasis is placed on the
basic principles and the acquisition of practical skills.

Basics
Students are not aware of any programming or Crystal Reports required. The ability to deal with a
Windows PC with sufficient training to successfully follow.

Duration
The course will take 1 day, during those days, the necessary topics required for working with Crystal
Reports.

Course Content
During this one day course covers the following topics:

• Introduction • Linking tables

• Basic business • Introduction to Visual Linking Expert
• Preparatory work • Selecting fields and grouping
• ODBC and DSN • Introduction detail
• Create DSN • Sort
• Start Crystal Reports • Conditional suppression
• Summary Info / Document Properties • totalizing
• default font • Math Introduction
• Report Template • commas, currency symbols,% signs
• Guides (Guidelines) • Select Expert
• levels in the report • Charts
• logo on • Exporting a report
• Record special fields

Advanced course (s)

After completing this training is still possible for the student to further develop by following a
customized training.For more information please contact us.
AutoCAD Plant 3D Basic

Course Description
In AutoCAD Plant 3D fundamentals, we elaborate on the possibilities that this new software solution,
the designers and engineers provide process systems. During the training, all necessary modules will
be discussed and any student behind its own system, after thorough explanation, independent
exercises. The duration of the course is 3 days, where we assume that the student has knowledge
and experience with external references in AutoCAD and 3D environment.

Basics
If the student does not have the knowledge and experience with external references and 3D AutoCAD
environment to go, we advise our basic minimum for engineers to follow. In this shortened course of 2
days AutoCAD is taught the necessary knowledge of AutoCAD.

Course Content
The subjects in this course make sure that after the course are able to daily tasks and design using
AutoCAD Plant 3D. The topics to be discussed are;

● Introduction to AutoCAD Plant 3D ● Basic Introduction Spec Generator

● The 'User Interface' ● The 3D pipe routing

● Setting up a project ● Adjusting models (Structural, Equipment and Piping)

● The Structural Modeler ● Setting up and generating Orthographic drawings

● The Equipment Builder ● Generate reports

● Generating a General Arrangement ● Isogen to apply for Isometric drawings

Each module is followed by a series of exercises that you learn the practical side of AutoCAD Plant
3D, at the end of the course you have a fully developed model that you made use of all opportunities
available in AutoCAD Plant 3D.

Continuation Courses
After completing this course you will be able to apply AutoCAD Plant 3D in your daily work, you can
also further explore the software by following the example AutoCAD Plant 3D Advanced course or our
AutoCAD P & ID courses. 
AutoCAD Plant 3D Advanced Course

Course Description
In AutoCAD Plant 3D advanced course we will elaborate on how this software Autodesk solution for
process industries can configure. AutoCAD Plant 3D so you can arrange to work according to your
business requirements and desires. During the training, all necessary modules will be discussed and
any student behind its own system, after thorough explanation, independent exercises. The duration
of the course is 3 days, where we assume that the student has knowledge and experience with
external references in AutoCAD and 3D environment.

Basics
If the student does not have the knowledge and experience with external references and 3D AutoCAD
environment to go, we advise our basic minimum for engineers to follow. In this shortened course of 2
days AutoCAD is taught the necessary knowledge of AutoCAD.

Course Content
The subjects in this course make sure that after the course are able to configure independent
AutoCAD Plant 3D.The topics to be discussed are;

Introduction • Plant 3D configuration • Plant 3D Class definitions 

• Modifying classes
• The user interface • Adding and modifying properties
• Level of detail • Using auto route functionality
• Introduction to tags and annotations
• P & ID Object Mapping
• Setting up a tag
• Modifying Object Mapping
• Join Settings • Setting up an annotation 
• Basic configuration paths • Introduction to the spec editor
• Export and import settings
• Data Manager configuration
• Modifying Existing specs and catalogs
• Layer and color settings • Creating new specs
Isogen • Plant configuration in 3D • Creating new catalog components
• Setting up an Isogen title block • Create multi-catalog specs
Isogen • basic settings in Plant 3D • Create custom templates component

Continuation Courses
After completing this course you will be able to configure AutoCAD Plant 3D for your daily work, you
can also further explore the software by following our example AutoCAD P & ID courses.
 Autodesk NavisWorks Simulate course

Course description
Autodesk NavisWorks Simulate to quickly and efficiently learn to use, we offer you one day-long
course. This training teaches you certified by Autodesk Autodesk NavisWorks Simulate professional
to work with your projects.

Basics
Some knowledge of the Microsoft Windows operating system is required.

Duration
The course will take 1 day, during this course learn the users deal with Autodesk NavisWorks
Simulate project plans to create, modify and simulate. Also, during the course attention will be paid to
the presenter functionality.

Course Content
During this one day course covers the following topics:

• Presenter • Time Liner

• Allocation of materials & lighting • Manual Tasks Add
• Background and environment setup • Link with Planning Software
• Selection and search sets of materials • Synchronize with changes
• Create and adapt materials and lights • Configure Time Liner simulations
• Reflection, mirror and use transparency effects • Export of simulations
• Rendering styles

Advanced course (s)

After completing this course the student will develop by following the example Autodesk NavisWorks
Manage course .
 Autodesk NavisWorks Manage Course

Course description
Autodesk NavisWorks Manage to quickly and efficiently learn to use, we offer you one day-long
course. This training teaches you certified by Autodesk Autodesk NavisWorks Manage professional to
work with your projects.

Basics
To participate in this course is to our knowledge of Autodesk NavisWorks Simulate course requires.

Duration
The course will take 1 day, during this course learn the users deal with Autodesk NavisWorks Manage
Clash performing detection and report. During the course attention will be paid to the use of various
Autodesk NavisWorks Manage important topics.

Course Content
During this one day course covers the following topics:

• Selection and search sets to • Integration with AutoCAD

• Time Liner basic functions for "Time-Based 'clashes • Reporting to Clash
• Configure Time Liner simulations • Moving Components
• Introduction Clash Detective  • Clash detection in Batch
• Selection Sets Clash Detection  • Compare clashes
• Time-based clashes

Advanced course(s)

CADTEAM for all modules of Autodesk NavisWorks various training courses, these courses are
based on the functionality of the Autodesk NavisWorks modules offer.