Scribd
Upload
103 views5 pages

17D06207 System On Chip Design - Order

The document is a letter from the Controller of Examinations at Jawaharlal Nehru Technological University Anantapur appointing Dr. Y.S.V. Raman as a subject expert to prepare question papers for the M.Tech I Year II Sem (R17) Examinations in November/December 2021. Dr. Raman is asked to prepare one set of 10 objective questions each for the online mid-term examinations in System on Chip Design, with questions covering different units of the syllabus. He is also requested to prepare the end examination question paper, and is provided with guidelines on the paper format, confidentiality, and remuneration.

Uploaded by

raman yarramilli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
103 views5 pages

17D06207 System On Chip Design - Order

The document is a letter from the Controller of Examinations at Jawaharlal Nehru Technological University Anantapur appointing Dr. Y.S.V. Raman as a subject expert to prepare question papers for the M.Tech I Year II Sem (R17) Examinations in November/December 2021. Dr. Raman is asked to prepare one set of 10 objective questions each for the online mid-term examinations in System on Chip Design, with questions covering different units of the syllabus. He is also requested to prepare the end examination question paper, and is provided with guidelines on the paper format, confidentiality, and remuneration.

Uploaded by

raman yarramilli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR

Ananthapuramu – 515 002, Andhra Pradesh, India.


OFFICE OF THE EXAMINATION BRANCH

STRICTLY CONFIDENTIAL
From: Date: 22.10.2021
Controller of Examinations (PG),
Examination Block, Old Campus.
To
Dr.Y.S.V. Raman
Professor of ECE
LBRCE
Mylavaram
Ph: 6305328327, [email protected]
Dear Sir / Madam
I am advised to inform you that you are appointed as subject expert to prepare question
paper as per the formats attached to your email. The subject details are given below:
Course M.Tech
Branch/Specialization M.Tech (DS & CE)
Name of the Examination M.Tech I Year II Sem (R17) Examinations Nov/Dec 2021
Subjects System on Chip Design(17D06207)
Last date of submission MID–I & MID–II : 30.10.2021&
End Exam: 08.11.2021
You are requested to prepareOne Set of question paper with Ten (10) objective
questionsfor each Online MID examination(Mid-I from UNIT I &UNIT-II, and MID-II from UNIT
III, UNIT-IV &UNIT-V).While framing the objective questions for online mid examinations see
that a total of 4 to 6 objective questions from each Unit for MID-I and a total of 3 to 4 questions
from each Unit for MID-II examinations may be covered.Please send the soft copy of the
question paper along with the key on a separate page mentioning the subject name for both
the online mid examinations I & II to [email protected] hard copy of the
remuneration billsmay be sent to this office by post.
You are further requested to keep this appointment strictly confidential and follow the
guidelines given below:
 The syllabus is herewith attached and requested to go through and prepare from within
and in the entire range of prescribed syllabus of the subject.
 There shall be One question of either – or type from each unit from Unit – I to Unit –V of
12 marks each i.e. Question No. 1 to Question No. 10, and each question may have sub
questions i.e. (a), (b) & (c) with breakup of marks.
 Total time allotted to answer five (5) questions is 3 hours.
 Mention clearly on the top of the question paper manuscript if student requires any data,
data books etc., during examination.
 Please indicate clearly the marks allotted to each part of the question on the right hand
side.
 The remuneration for setting online Mid Examination is @ Rs.50/- per question with a
maximum of Rs. 500/-. (including typing charges)
 Remuneration for setting the University end question paper is Rs.800/- per Set.
Note: If any relative of yours is appearing in the paper to be set, you are requested to communicate the
same to the under signed so that alternative arrangements can be made.

Encl: Controller of Examinations


(a) Acceptance Letter, (b) Certificate By Paper Setter / Examiner, (c) Syllabus, (d) Model Question Paper,
(d) Remuneration Bill
* For any queries please contact Additional Controller of Examinations, JNTUA, Ananthapuramu, Mobile Number – 8008802337.
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR
Ananthapuramu – 515 002, Andhra Pradesh, India.
OFFICE OF THE EXAMINATION BRANCH

ACCEPTANCE LETTER

To From:
The Director of Evaluation,
Examination Block, Old Campus,
J.N.T.University Anantapur
Ananthapuramu – 515 002.

Sir,

I wish to intimate to accept to set the paper / inability to accept the offer, communicated,
through your letter dated 22.10.2021 regarding paper setting in the subjectSystem on Chip
Design with code No.: 17D06207 forM.Tech I Year II Sem (R17) Examinations Nov/Dec 2021.

 I have a / no relative taking the examination.


 I have not coached privately any students for the examination mentioned above.

Yours Sincerely

Place:Mylavaram Signature:

Date:13.11.21 Name:Y.S.V.Raman

Note: If there is a reative please state exact relationship.


CERTIFICATE BY PAPER SETTER / EXAMINER
(To be submitted along with the bill form)

To
The Director of Evaluation,
Examination Block, Old Campus,
J.N.T.University Anantapur
Ananthapuramu – 515 002.

Sir,

I Certify that

 No question is repeated in the question paper.


 All sets of question papers are different and no question is repeated.
 Questions are set from the prescribed syllabus only.
 Necessary and sufficient data for solving problems has been provided.
 All the guidelines prescribed for setting question paper mentioned in the
appropriate letter have been followed.
 I have destroyed all the notes, rough work and other such material used by me for
setting the question paper(s).

Signature of the Paper Setter


Place:Mylavaram

Date:13.11.21 Name: Y.S.V.Raman

Address:Lakireddy Balireddy College of Engineering

Contact No: 9490934684


E-mail:[email protected]
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR
Ananthapuramu – 515 002, Andhra Pradesh, India.
OFFICE OF THE EXAMINATION BRANCH
REMUNERATION BILL FOR QUESTION PAPER SETTING
Name of the Expert: Dr.Y.S.V. Raman
Designation & Address: Professor of ECE LBRCE, Mylavaram

BANK DETAILS:
A/C No. 3 6 1 1 1 3 3 0 3 8

PAN A B D P Y 3 6 1 5 M

Name of the Bank:CENTRAL BANK OF INDIA Branch:LBRCE


Bank IFSC No.: CBIN283964

Course M.Tech
Branch DS & CE

Year and Semester M.Tech I & II Sem ( R17 )


M.Tech I Year II Sem (R17) Examinations Nov/Dec
Month and Year of Exam
2021
M.Tech I Year II Sem (R17) Examinations Nov/Dec
Regular or Supplementary
2021
Question Paper Code No. 17D06207

Subject System on Chip Design

Number of Sets of Question Papers 2 Sets

Rate of Paper Setting @Rs.800/-


1600
Total (Rs.)

Received sum ofRs.1600 (RupeesOne thousand six hundred only)


Certified that the above work for which remuneration claimed is completed and in case, if the amount
claimed is found to be in excess than eligible, I will refund the excess amount.

Place:Mylavaram
Date: Signature of the Paper Setter
FOR OFFICE USE ONLY
The claim preferred in this bill has been verified and is found in order. The bill may be passed. Passed for
Rs. (Rupees _

only)

ADDITIONAL CONTROLLER OF EXAMINATIONS


JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR
Ananthapuramu – 515 002, Andhra Pradesh, India.
OFFICE OF THE EXAMINATION BRANCH

You might also like