Scribd
Upload
751 views2 pages

Transmission A40F Functional Check

The document provides instructions for technicians to perform functional checks of transmission systems for various Volvo construction equipment models. It includes tables to record machine and transmission data and lists specific tests to conduct in different groups, including test driving the machine, checking error codes, sensor values, electrical power supply, gear selector position, PWM valves, clutches, and brakes.

Uploaded by

MrAlbert2009
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
751 views2 pages

Transmission A40F Functional Check

The document provides instructions for technicians to perform functional checks of transmission systems for various Volvo construction equipment models. It includes tables to record machine and transmission data and lists specific tests to conduct in different groups, including test driving the machine, checking error codes, sensor values, electrical power supply, gear selector position, PWM valves, clutches, and brakes.

Uploaded by

MrAlbert2009
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

VOLVO CONSTRUCTION EQUIPMENT

SERVICE BULLETIN
Language Code Group Product No. Version Date Page
GB 420 ART 82 K 1 2012-01-27 1/2
Applies to models
A25F, A30F, A35F, A35F FS, A40F, A40F FS

ONLY FOR DISTRIBUTORS / DEALERS

Transmission, functional check

WARNING
Please pay attention to the safety instructions in the Operator's
and Service Manuals concerned.
This Service Bulletin is to be considered as technical information
only and is not subject to any reimbursement programs outside
normal warranty.
All steps in the list below must be carried out before carrying out
trouble-shooting based on symptoms. For more information see
Service Bulletin 420 ART 81K.
1 Fill in Table 1, "Machine data", and Table 2, "Transmission
data".
2 Read, with the aid of VCADS Pro, off current error codes and
enclose the job card with the Service Bulletin.
3 Carry out a functional check of the machine according to Table
3, "Functional check". When the test has been completed,
describe any deviations in the centre column and enter an
"X"in the right column.

Table 1. Machine data


Machine Ser. No. Machine hours Customer

Table 2. Transmission data


Part No. Ser. No.

Volvo Construction Equipment


Feedback mail: [email protected]
Language Code Group Product No. Version Date Page
GB 420 ART 82 K 1 2012-01-27 2/2

Table 3. Functional check


Group Op. No. Designation OK
"Test-running"
Test-run the machine and check all gears and gear-shifting programmes.
Comments:
................................................................................................................
................................................................................................................
1. Service 17012–3 Error codes
and The purpose of this test is to read and delete any fault codes that may be
maintena stored in the machines control units.
nce Comments:
................................................................................................................
................................................................................................................
3. 30101-3 Sensor values Vehicle control unit check
Electrical The purpose of the test is to check that the sensors give realistic values.
system Comments:
................................................................................................................
................................................................................................................
3. 30901-3 Power supply, control unit (ECU), check.
Electrical The test checks the power supplies to the control units.
system Comments:
................................................................................................................
................................................................................................................
4. Power 40012-3 Position sensor, gear selector, test
transmiss The test checks that selected gear position is read off correctly in the control
ion unit.
Comments:
................................................................................................................
................................................................................................................
40026-3 PWM-valves, clutches and brakes, test
The test checks the function of the PWM valves.
Comments:
................................................................................................................
................................................................................................................
42002-3 PWM-valve main oil pressure transmission, test
The test checks the function of the PWM valves.
Comments:
................................................................................................................
................................................................................................................

Informant's name: ....................................................................


NOTE!
This report must be added in Techline not later than five days after
the inspection date.

You might also like