Scribd
Upload
420 views7 pages

0.2 Performance Criteria Checklist Study Guide CHECKED SUBMIT

This document provides an overview of an online training course for Computer Systems Servicing NCII. The course covers two units: (1) Setup Computer Network which includes installing network cables, configuring network settings, and setting up routers and wireless access points; and (2) Setup Computer Server which involves configuring user access and network services. The course objectives, key concepts, learning resources, study questions, and study schedule are outlined to guide students in completing online lessons, activities, and assessments to learn the skills required to setup computer networks and servers.

Uploaded by

Michael Eala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
420 views7 pages

0.2 Performance Criteria Checklist Study Guide CHECKED SUBMIT

This document provides an overview of an online training course for Computer Systems Servicing NCII. The course covers two units: (1) Setup Computer Network which includes installing network cables, configuring network settings, and setting up routers and wireless access points; and (2) Setup Computer Server which involves configuring user access and network services. The course objectives, key concepts, learning resources, study questions, and study schedule are outlined to guide students in completing online lessons, activities, and assessments to learn the skills required to setup computer networks and servers.

Uploaded by

Michael Eala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 7

COMPUTER SYSTEMS SERVICING NCII

UC 2: SETUP COMPUTER NETWORK


LO1. INSTALL NETWORK CABLES
LO2. SETUP NETWORK CONFIGURATION
LO3. SET ROUTER/WIFI/WIRELESS ACCESS POINT/REPEATER
CONFIGURATION
UC3: SETUP COMPUTER SERVER
LO1. SETUP USER ACCESS
LO2. CONFIGURING NETWORK SERVICES

00 Hours

STUDY GUIDE

Prepared by: Dr. Erwin C. Bucasas Trainer


Mr. Felizardo Bello Trainer
Ms. Mary Ann Acera Technical Support
Ms. Beverly Moselina Trainer
Mr. Ismael M Balana Trainer

INTRODUCTION:

Welcome to this online Computer Systems Servicing NCII. This course is


designed to enhance your knowledge, skills, behaviour, and motivations required to
Setup Computer Network and Setup Computer Server.

OBJECTIVES:

UC3: Setup Computer Network

At the end of this module, you should be able to:

• Determine and plan cable routes according to network design *


• Identify and obtain network materials necessary to complete the work according to
established procedures and checks against system requirements*
• Obtain tools, equipment and testing devices needed to carry out the installation work in
accordance with established procedures and check for correct operation and safety*
• Use appropriate personal protective equipment and follows OH & S policies and
procedures
• Perform copper cable splicing in accordance with the standards such as the 568A and
568B color coding cabling standards*
• Install network cables and cable raceway in accordance with established procedures and
installation requirements*
- slotted PVC
- metallic raceway
- flexible conduit
• Perform and check installation work to ensure compliance with requirements*
• Follow 5S and 3Rs according to environmental policies
• Check network connectivi/ty of each terminal in accordance with network design*
• Diagnose and remedy network fault or problem in line with the standard operating
procedures
• Configure network interface card (NIC) settings in accordance with network design*
- Configure IP address of all devices are configured
• Carry out communication checking between terminals in accordance with OS network
configuration guides*
- File sharing
- Access network resources
• Respond to unplanned events or conditions in accordance with established procedures*
- Diagnose problems by retracing steps or localizing the trouble area
• Set router/Wi-Fi/ wireless access point/repeater configuration* - Configure and set
router
• Configure client device systems settings in accordance with manufacturer’s instructions,
end-user preference and network design*
• Configure Client computer wi-fi access
• Configure local area network (LAN) port*
• Configure wide area network (WAN) port*
• Configure wireless settings*
• Configure security/firewall/advance settings*
• Undertake final inspection to ensure that the configuration conforms with the
manufacturer’s instructions/manual*
• Check computer networks to ensure safe operation*
• Prepare/complete reports according to company requirements*

UC3: Setup Computer Server


• Create user folder in accordance with network operating system features*
• Configure user access level based on NOS features and established network access
policies and end-user requirements*
• Perform security check in accordance with established network access policies/end-user
requirements*
• Check normal functions of server in accordance with manufacturer’s instructions*
• Install/update required modules/add-ons based on NOS installation procedures*
• Confirm network services to be configured based on user/system requirements*
• Check operation of network services based on user/system requirements*
• Respond to unplanned events or conditions in accordance with established procedure*
• Perform testing of network through file and printer sharing, documentation and pre-
deployment procedures*
• Undertake pre-deployment procedures based on enterprise policies and procedures*
• Undertake operation and security check based on end-user requirements*
• Prepare and complete reports according to enterprise policies and requirements*

NOTE: * Critical Aspects of Competency


KEY CONCEPTS:

 Maintain and Repair Computer Systems and Networks


UC3-LO1

 Network Media
 Networking Tools and Testing Devices
 Ethernet Cable Configurations
 Structured Network

UC2-LO2

Network Connectivity
Ethernet Cable Configuration
SOHO Network
UC2- LO3
Setting Up Wireless Access Point
Setting up Router

UC2-LO4

Checkin devices and network configuration


Prepare and conduct complete reports
Testing wireless/wired network setup

UC3-LO1

User Access Configuration

LEARNING RESOURCES:

1. Self-paced Learning Materials uploaded in LMS (Interactive Book type lessons, online
presentations, etc.)
2. Webinars (Google meet/ Zoom)
3. Lecture videos / presentation
4. Task sheets and Performance criteria checklist

STUDY QUESTIONS:

UC 2
1. What are the networking tools, equipment and testing devices that are commonly
used in networking?
2. How to configure t568A and t568 cable?
3. How to install and configure network interface card?
4. How to set up a wireless network?
5. How to set up a LAN network?
6. How to share files?

UC3

1. How to setup user accessibility on a server?


2. How to setup user folder according to network operating systems feature?
3. What are the procedures in performing a test of network file and printer sharing
using a network operating system?
4. What are some standard server deployment procedures applied?

ACTIVITIES (include Online and Offline activities)

A. Online Activities

1. Orientation Program
a. Zoom meeting start at 8:00 AM. Attendance is checked
b. Attend the Trainees Induction to be Held in Google meet
c. Meeting ID: meet.google.com/gfx-ipif-qoh
2. Access the Learning Management System, and read the study guide
3. Participate in the Discussion forum entitle CSS Interactive Lesson
 Take Pre-test
 Read lesson under UC2 – LO1
 Complete activity no. 1
 Take unit quiz for unit 1
 Take posttest

 Take Pre-test
 Read lesson under UC2 – LO2
 Complete activity no. 2
 Take unit quiz for unit 2
 Take posttest

 Take Pre-test
 Read lesson under UC2 – LO3
 Complete activity no. 2
 Take unit quiz for unit 2
 Take posttest

 Take Pre-test
 Read lesson under UC – LO4
 Complete activity no. 2
 Take unit quiz for unit 2
 Take posttest

 Take Pre-test
 Read lesson under UC3 – LO1
 Complete activity no. 2
 Take unit quiz for unit 2
 Take posttest

4. Course Evaluation

B. Offline Activities

a. Demo and assessment/job activities and oral questioning

b. Mentoring and coaching

c. Institutional assessment (“After the Module under UC4”)

STUDY SCHEDULE

Date Topics Activity Venue No. of


and Time Hours

Zoom
Day 1 Orientation to Online Trainees Induction
Meeting
1 hour
Training Program
(8:00 am)

Read the Study Guide Online 30 minutes


(Training
Site)

Participate in Forum Online 30 minutes


LMS
(Training
Site)

Take the Pre-Test Online 30 minutes

UC LO1. INSTALL Online


Day 2
NETWORK (Training hours
CONFIGURATION Site)

Day 3 UC LO2. SETUP Online


NETWORK (Training hours
CONFIGURATION Site)

Day 4 Online
UC LO3. SETUP WI (Training hours
Site)

LO4.
RECTIFY/CORRECT
Day 5
DEFECTS IN
COMPUTER
SYSTEMS AND
NETWORKS
LO5. INSPECT AND
TEST THE
Day 6 COMPUTER
SYSTEMS AND
NETWORKS

Day 7 Take the Post Test Online 1 hour

Day 7 Fill up Course evaluation Online 30 minutes


Survey
REFERENCES:

CBLM Identify the tools, equipment, testing devices and materials

CBC – Computer Systems Servicing NC II

Training Regulations (Computer Systems Servicing NCII)

https://cssnc2site.wordpress.com/maintain-and-repair-computer-systems-and-networks/

https://www.moneycrashers.com/computer-maintenance-tips-checklist/

https://www.studiopsis.com/computer-repair-guide/

You might also like