LIX 860N-IC: Technical Information Global Mining Solutions

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Technical Information Global Mining Solutions

TI/EVH 0144 e
December 2015 Page 1 of 2

Supersedes edition dated February 2013

LIX® 860N-IC
® = r egistered trademark of BASF SE

Solvent Extraction Reagent

Description LIX 860N-IC, 5-nonylsalicylaldoxime in a high flash point hydrocarbon


diluent, is a very strong copper extractant requiring more than 225 g/l
H2SO4 for stripping.

Principal uses LIX 860N-IC can be blended with LIX 84-IC over a broad range to give
copper extraction reagents of variable extractive strength. It extracts copper
according to the equation below:

2RH(org) + Cu+2(aq) R2Cu(org) + 2H+(aq)

LIX 860N-IC will also extract zinc from ammoniacal solutions.

Typical properties Physical form Fluid amber liquid


Specific gravity (25 °/25 °C) 0.925 – 0.945 g/cm³
Flash point1 Greater than 170 °F
Copper complex solubility > 30 g/l Cu at 25 °C
1 Flash point is determined by Setaflash closed cup.

Performance specifications2 Maximum copper loading 5.5 to 5.9 g/l Cu


Extraction isotherm point ≥ 5.00 g/l Cu
Extraction kinetics ≥ 95 % (30 seconds)
Extraction Cu/Fe selectivity ≥ 2500
Extraction phase separation ≤ 70 seconds
Strip isotherm point ≤ 3.50 g/l Cu
Net copper transfer ≥ 2.00 g/l Cu
Strip kinetics ≥ 95 % (30 seconds)
Strip phase separation ≤ 80 seconds
 erformance parameters are determined using the Standard Quality Control Test of LIX Reagents,
2 P
based on a dilution of 7.143.

Storage & Shelf life LIX 860N-IC is stable for at least five years from date of manufacture in its
unopened, original packaging.

Shipping LIX 860N-IC is available in IBCs and bulk tanker deliveries.

Technical service Advice and assistance in the running of laboratory and plant tests is given
by representatives of BASF, who are experienced in mineral processing
applications.

Health & Safety Please refer to the Safety Data Sheet for detailed information concerning
product’s hazards and appropriate protective measures in the workplace.
TI/EVH 0144 e  December 2015 Page 2 of 2 LIX 860N-IC

Note The data contained in this publication are based on our current knowledge
and experience. In view of the many factors that may affect processing
and application of our product, these data do not relieve processors from
carrying out their own investigations and tests; neither do these data imply
any guarantee of certain properties, nor the suitability of the product for a
specific purpose. Any descriptions, drawings, photographs, data, propor-
tions, weights etc. given herein may change without prior information and
do not constitute the agreed contractual quality of the product. It is the
responsibility of the recipient of our products to ensure that any proprietary
rights and existing laws and legislation are observed.

December 2015

North America Europe South America Asia Pacific Africa

BASF Corporation BASF Performance BASF Chile S.A. BASF Australia Ltd. BASF South Africa (Pty) Ltd.
2430 N. Huachuca Drive Products plc. Av. Carrascal N° 3851 Level 12, 28 Freshwater 852 Sixteenth Road
Tucson, Arizona 85745 Cleckheaton Road Quinta Normal Place Midrand, P. O. Box 2801
US Low Moor, Bradford, Santiago VIC 3006, Southbank Halfway House 1685
BD12 0JZ, GB Chile Australia South Africa

Tel.: +1 520 622 8891 Tel.: +44 1274 417 000 Tel.: +56 2 2640 7000 Tel.: +613 8855 6600 Tel.: +27 11 203 2400
Fax: +1 520 624 0912 Fax: +44 1274 606 499 Fax: +56 2 775 3095 Fax: +613 8855 6511 Fax: +27 11 203 2431

www.mining-solutions.basf.com
[email protected]

You might also like