Scribd Logo
Upload

Welcome to Scribd!

  • 104 views

    MC250 Urethane Clearcoat: Background

    Uploaded by

    Wayne Lund

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    MC250 Urethane Clearcoat: Background

    Uploaded by

    Wayne Lund
    104 views3 pages

    Original Title

    OB51+MC250+Urethane+Clearcoat+02+20

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    104 views3 pages

    MC250 Urethane Clearcoat: Background

    Uploaded by

    Wayne Lund

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    ®

    MC250
    Urethane Clearcoat
    Background
    OMNI® MC250 is a two component clearcoat that is ideal for value conscious body shops who require quick air dry
    performance with good buffability. MC250 can be used with a choice of three hardeners depending on job size
    and/or temperature requirements.

    Components
    Clearcoat Hardener
    MC250 Urethane Clearcoat MH255 Spot Clear Hardener 55-65°F (13-18°C)
    MH256 Overall Clear Hardener 75-85°F (24-29°C)
    MH257 High Temperature Hardener 85-95°F (29-35°C)

    Compatible Products
    Can be applied over:
    MBP Omni Plus Acrylic Urethane Basecoat
    MBC Acrylic Basecoat
    MTK Acrylic Urethane
    MAE Acrylic Enamel with Hardener

    Preparation
    Allow basecoat color to dry a minimum of 30 minutes and a maximum of 24 hours before clearing. After 24 hours
    the basecoat should be lightly sanded and reapplied before applying MC250 .

    Mixing
    Ratios
    MC250 : MH25X
    4 : 1

    Pot Life: 1.5 - 2 hours at 70°F (21°C)

    Additives MX193 Flexible Additive 10% to RTS quart


    MX194 Fisheye Eliminator Up to .5 oz. to RTS quart
    SU4985 Universal Matting Agent, see ONECHOICE® product bulletin OC-2.

    Air Pressure and Gun Setup


    HVLP: 8 - 10 psi at the air cap
    Compliant: 29 - 40 psi at the gun

    Gun Setup: 1.3 - 1.6 mm or equivalent

    Note: For best overall results, refer to spraygun manufacturer's recommendations for inlet air
    pressures.

    www.ppgrefinish.com Part# OB51 02/20


    Application
    Coats: 2 - 3 full wet coats

    For optimum performance, final recommended film build is 2.0 - 2.5 mils

    Dry Times
    Between Coats: 5 - 10 minutes at 70°F (21°C)

    Air Dry: With MH255 With MH256 / MH257


    Dust: 10 - 15 minutes 10 - 15 minutes
    Tack: 30 - 50 minutes 50 - 60 minutes
    Tape: 2 - 4 hours 2 - 4 hours

    Force Dry: 30 minutes at 140°F (60°C) 30 minutes at 140°F (60°C)

    IR: 12 - 15 minutes 12 - 15 minutes

    Polish: Air Dry:


    2 - 4 hours at 70°F (21°C) 6 - 8 hours at 70°F (21°C)
    Force Dry:
    After cool down After cool down

    Recoat: Air Dry:


    8 hours or overnight at 70°F (21°C)
    Force Dry:
    After force cure and cool down
    Must lightly scuff before recoating

    Clean Up
    Clean spray guns, gun cups, storage pots, etc., thoroughly with MR Reducer, MS251 Multi Purpose Solvent or
    another appropriate clean up solvent after each use.
    Follow EPA guidelines for proper storage and disposal of solvent-borne waste paint.

    Properties
    VOC
    Package 3.57 lbs./ gal (428 g/L)
    Applied Less exempts (4:1) 4.14 lbs./ gal (496 g/L)
    Volume Solids (4:1) 35.4%
    Weight Solids (4:1) 42.0%
    Film Build Per Coat
    Applied (4:1) 1.0 - 1.5 mils
    Sq. Ft. coverage at 1 mil
    Applied (4:1) 568 sq. ft. at 100% transfer

    www.ppgrefinish.com Part# OB51 02/20


    Limitations
    Omni products should not be combined with components of other product lines.
    Precautionary Information:
    The contents of this package may have to be blended with other components before the product can be use. Before opening the packages be sure you understand the
    warning messages on the labels of all components since the mixture will have the hazards of all of its parts. Spray equipment must be handled with due care and in
    accordance with manufacturer's recommendations. Follow label directions for respirator use. Wear eye and skin protection. Observe all applicable precautions.
    Medical Response:
    EMERGENCY MEDICAL OR SPILL CONTROL INFORMATION (412) 434-4515; IN CANADA (514)-645-1320
    See Safety Data Sheet and Labels for additional safety information and handling instructions.
    Data Safety Sheets for the PPG products mentioned in this publication are available through your PPG Omni brand distributor. To the best of our knowledge, the
    technical information in this bulletin is accurate; however, since PPG Industries is constantly improving its coating and paint formulas, the current technical data may
    vary somewhat from what was available when this bulletin was printed. Contact your Omni brand distributor or visit www.ppgrefinish.com for the most up-to-date
    information.

    © 2020 PPG Industries, Inc. All rights reserved


    The PPG Logo, Omni, and OneChoice are registered trademarks and We protect and beatify the world is a trademark of PPG Industries Ohio, Inc.

    www.ppgrefinish.com Part# OB51 02/20

    You might also like