AUTOMATIC POLYPROPYLENE

STRAPPING MACHINE
TP-6000-1 TP-6000-3
TP-6000CE1 TP-6000CE3

OPERATION MANUAL
&
SPARE PARTS LIST IMPOR
K EEP
TANT!
IT WEL
L
 01/18/08

Explanations For Each Model No. ：

TP-6000-1 : Single Phase Model

TP-6000-3 : Three Phase Model

TP-6000CE1 : Single Phase With CE Version

TP-6000CE3 : Three Phase With CE Version

 01/18/08

PART I

CONTENTS

1. Safety Instructions………..……..………………………. 1~2

2. Construction and Function of Units………..……..…….. 3

3. Technical Data …………………………..………………. 4

4. Control Panel …………………………..………………. 5

Control Panel (CE Version) …………………………..… 6

5. Electric Control Unit …………………………..…………7~8

6. How to Load P.P. Strap ………………..……………….. 9

7. How to Operate …………..…………………………….. 10

8. Recommend for Trouble-free Operation……..………… 10

9. Adjustments ……………...……………………………… 11~14

10. Installation of Arch Unit…………………………………15~16

11. Wiring Diagram …………………………………………17~21

12. Troubleshooting …………..………………………………22

 01/18/08

1. Safety Instructions

(1) Before operating

a. Please always wear proper eye protection and safety gloves before operating this
machine.

Eye protection must be worn Safety gloves must be worn

b. Please make sure if the power voltage is correct.

c. It can only be operated with P.P. strap; not PET strap or Polyester cord strap.

(2) During operating

a. The weight of package should not exceed 100kg, and the size should not be
less than 100mm (width) x 20mm (high).
b. Check if the machine emits any smokes or unusual sound when it is running.
c. Warning
c-1 For your own safety, please read instruction manual before operating. Keep
away from arch while the machine is running.
c-2 Do not put your hands or body into the Archworking area when the machine is
running.

(3) After operating

a. Please pull out the power plug.
b. Please get rid of the dirt or impurity on the machine.

(4) Signs

Hot! Heiss! chaud!

Caution, risk of electric shock Do not touch!

-1-
 01/18/08

(5) Maintenance
a. Please turn off the power before opening the top plate.
b. Please do not touch the heater due to the high temperature.
c. Be careful with the heater if you open the upper top plate.

(6) Other remainders

a. Do not alter or bypass protective interlocks
b. The operation manual must remain attached to the machine at all times
c. Do not alter circuits and machine unless authorized to do so by the manufacturer.
d. All electrical apparatus must be properly grounded.
e. Wire the machine according to the local electrical code.

-2-
 01/18/08

2. Construction and Function of Units

1 Strapping head unit
This unit is the most important part of the
machine for cutting and sealing of P.P.
strap.

2 Bandway unit
This is the arch track through which
P.P. strap forwards or reverses.

5 Feed unit
Feeding and reversing of strap.

4 Reel unit
Holds the strap coil.
(If strap core is 280mm,
you can take off the center
drum to have core size 200mm.)

6 Electric control unit

3 Accumulator unit
This unit accumulates the quantity of
strap required for smooth feeding into
the arch track.

-3-
 01/18/08

3. Technical Data

Sealing method Heat

Strap width: 8 mm to 12 mm (3/8"-1/2")
Strap thickness: 0.55 mm up to 0.75 mm (0.022" - 0.03")
Strap reel diameter: 200 mm (8" nominal)
Width : 1430 mm (56.3")
Depth: 620 mm (24.4")
Table height: 810 mm (31.9")
Electrical connection: AC 110V/220V/230V/240V (50/60Hz), 1PH
AC 220V/380V/400V (50/60Hz), 3PH
Weight: 220 kg (341.7 lbs.)
Noise emission: 83 dB (A)
Ambient temp: 5°C ~ 40°C (41°F ~ 104°F)

-4-
 01/18/08

4. Control Panel
a. (For Standard Version)
1 Start switch 5 Auto/Hand selector switch

This is the switch to start a strapping While selector switch is placed to the position
operation. A strapping cycle is "AUTO", the machine will automatically strap
completed only after actuation of the package when it is placed on the table and
this switch. passes the arch, (the strapping cycle will
continue, if the package remains under the
2 Stop switch arch. ) While the selector switch is
placed to the position "HAND", after
Push the stop switch in case of emergency. positioning the package under the arch,
Simply push this stop switch to push the "START" switch, then one strap will
completely stop the strapping operation. be applied.

*Lock stop switch if strapping has to be 6 Reset switch (Option)

interrupted for a short period of time. The
machine will stop but the heater element If the machine is with short feed sensor
will maintain its temperature. The machine (Page 5 of part Ⅱ), When strap no at
will then be immediately ready for operation home position sealing This switch has
without need for warming-up of the heater reset function.
element.

3 F/R switch

(Feed and Reverse)

After P.P. strap is fed and the power supply
switch is on, turn this switch counterclockwise
to feed P.P. strap around arch.
When the switch is turned clockwise, P.P.
strap reverses and returns strap from the
arch track to the accumulator box.

4 Power supply switch and pilot

lamp

When the power supply switch is turned

on, the pilot lamp lights up, showing that
electric power is being supplied.

-5-
 01/18/08

b. (For CE Version)
1 Start switch

This is the switch to start a strapping operation

A strapping cycle is completed only after
actuation of this switch.

3 F/R switch

(Feed and Reverse)

After P.P. strap is fed and the main power switch is
on, turn this switch counterclockwise to feed P.P.
strap around arch. When the switch is turned
clockwise, P.P. strap reverses and returns strap from
the arch track to the accumulator box.

4 Power pilot lamp

When the main power switch is turned on, the pilot

lamp lights up, showing that electric power is being
supplied. If the machine has the short feed sensor,
When strap no at home position sealing this switch
has reset function and lights up if under power.

5 Auto/Hand selector switch

While selector switch is placed to the position ,

the machine will automatically strap the package

( the strapping cycle will continue, if the package

remains under the arch. ) While the selector switch is placed
to the position , after positioning the package under
the arch, push the "START" switch, then one strap will
be applied.

-6-
 01/18/08

5. Electric Control Unit

a. (For Three Phase)
Magnetic switch 6 Timers 7 & 8

This is a current protection device. Timer , T1 7 ： This Timer, T1, determines

In case of overload, the over load relay the time necessary for strap take-up
will cut off power automatically. For Set Timer, T1, bearing in mind the time
normal operation, please actuate required for strapping the minimum-size
this switch. package. Normally, Timer T1 is set
at about 0.4 seconds, but may have to be
adjusted depending on a package size.

Timer , T2 8 ： This Timer, T2, determines

the time necessary for strap feed
If the time selected for Timer T2 is
too short, strap may not reach the
sealing position.
Normally, Timer T2 is set to about 0.8
seconds for standard arch (850x600), but
may have to be adjusted depending on
arch size.

-7-
 01/18/08

b. (For Single Phase)

Timers 30 & 29

Timer, T1 30 ： This Timer, T1, determines the time necessary for strap take-up. Set
Timer, T1, bearing in mind the time required for strapping the minimum-size package.
Normally, Timer T1 is set at about 0.3 seconds, but may have to be adjusted
depending on a package size.

Timer, T2 29 ： This Timer, T2 determines the Time necessary for strap feed. If the
time selected for Timer T2 is too short, strap may not reach the sealing position.
Normally, Timer T2 is set to about 0.7 seconds for standard arch (850x600), but may have
to be adjusted depending on arch size.

-8-
 01/18/08

6. How to Load P.P. Strap

．Ensure that the power supply

switch is turned off before
loading P.P. strap.

Step 1
Place a strap coil on the reel drum
according to the arrow direction as in-
dicated on the Outer Flange 9 .
After sliding on the coil, put the Outer Flange
on the strap coil and tighten it using the Reel
Nut Handle 10 .

Step 2
Thread the tip of the P.P. strap into the Strap
Guide Roller 11 . After that, push it through
the Guiding Angle 12 . At this moment, twist
the strap so that the inside part of the P.P.
strap turns out downward and the outside
touches the roller. See drawing.

Step 3
Open the door of Accumulator Box 16 . Insert P.P.
strap into the Accumulator Feed Shooter 13 ,
pushing the lever 14 downward. Pull out about
1 m of strap through the Accumulator Feed Shooter
13 and insert it into the narrow passage of
the Accumulator Box.

Step 4
Turn the Upper Roller Grip 18 to the
lefthand side, while pushing the strap tip of
strap under the Strap Cover 17 . By turning
the upper roller grip, the strap will pass
between the Upper Feed Roller 19 and the
Feed Roller 20 .

-9-
 01/18/08

7. How to Operate 8. Recommendations for

Trouble-Free Operation

(1) For standard version ： (1) Make sure to turn off the power supply
Turn the power supply switch on. switch , when maintenance and/or
The pilot lamp lights up and the strap exchange of strap coil is required.
is automatically fed into the Accumulator
Box. (See page 2no. 4 ) (2) Pull the strap out of the Accumulator Box
For CE version： and rewind it on the Reel Unit to prevent
Turn on the switch (make a 90-degree cambering, if the machine will not
clockwise turn). The front door will lock be used for long periods of time.
at the same time and the strap will be
automatically fed into the Accumulator (3) In order to change the strap width, use
Box. If you want to open the front door, the strap convesion kit which is sold
turn off the switch first (make a 90-degree as an option.
counterclockwise turn). The operator
can now open the front door without risk. (4) When the electric plug receptacle has
(See drawing below) to be changed, check the revolving
direction of motor. (P5 NO. 15 ).
(2) Turn F/R switch counterclockwise.
P.P. strap is fed into the arch track. (5) Always keep the machine clean, especially
Keep turning the F/R switch until by removing dust and strap fluff
the strap reaches the sealing position. in the vicinity of the strapping head and
It is now ready for strapping. heater unit.

(6) Do not use extension cords.

(3) Wait for about 3 minutes until

the heater element has reched its
required operating temperature.

(4) Place a package on the center

of the strapping head. Push the start
switch 1 (P.2), and the package
is automatically strapped. The
strapping operation is repeated if
the start switch is pushed again.

(5) After operation, turn off the

power supply switch.

-10-
 01/18/08

9. Adjustments

Tension strenght
The tension knob is used to adjust the
tension strenght for strapping.
The range of strapping tension is 0-10, so
that an operator can choose the adequate
strapping tension for a package. Normal-
ly, the knob position 4 or 5 is suitable for
a carton box. 1 0
2 MIN.

3
6 5 4
Heater temperature
Set the knob to position 3 or 4.
Adjust the heater temperature by selecting

7
MAX. 8
a position between l and 6. Choose the suitable 10 9
temperature, bearing in mind the environmental
conditions of the machine. If the heater
temperature is too high or too low, a proper
seal will not be obtained. Gradually increase
or reduce the position until obtaining an optimum
seal.

Input:110V, 220V/230V/240V
Output:3−5.2V

TEMP−CONT

-11-
 01/18/08

Feed and take-up

mechanism

If this unit is not correctly adjusted, strap feed

and take-up will become irregular.

Normally, this unit is set to accept P.P. strap

with the thicknesses of 0.55mm-0.6mm
If a different strap thickness is used, adjust the
section marked by a circle in the drawing so that
the clearance between the Upper Roller Spring 23
and the Upper Shaft Spring Hook 24 should
be the thickness of the strap you are using.
Strap can only be taken up properly if
this unit is precisely adjusted. (If not, strap
will be sealed before being tightened around
the package ) Moreover, strap will leave
the chute arch track when feeding into it if
there is no clearance.

1. Check if the control unit returns to its

home position. Insert the strap
between Feed Roller 22 and Upper Feed
Roller 21 .

2. Loosen 2 Bolts 27 holding the right-hand

Block Arm 25 with the Press Arm Shaft
26 . Press Arm Shaft can then easily be
moved by hand.

3. Adjust so that there is a clearance between

the Upper Roller Spring 23 and the
Upper Shaft Spring Hook 24 the same
as the thickness of the strap you
are using.

4. Tighten 2 Bolts 27 .

-12-
 01/18/08

Limit switches ( Movements of control unit)

LS3, 31 controls the machine
to stop at home position and is
adjusted by Limit Switch Contactor, 32 .

When LS1 is activated, the control unit

stops and the strap starts reversing. In
the control unit, the right Press Unit 37
rises up to the top and grips the strap
under Slide Table, 38 . Strap Guide, 39 moves
backward and LH Strap Guide Flap, 40 , opens
completely. At this moment, cam follower
, 41 stays at its position before it starts
rising on the Tension Cam, 42 . The illustration
shows the correct position of control unit with
correct adjustment of LS1, 33 .
LS1 is adjusted by Limit Switch Contactor, 34 .

The strap feed cycle is triggered by LS2, 35

To activated LS2, 35 , correctly, adjust limit
switch contactor, 36 , so that the cam follower,
41 , strats descending along the tension cam, 42 .

-13-
 01/18/08

Amount of strap in Accumulator Box

The machine has already been set in its

Accumulator Box.

However, some adjustment may be

required, depending on the actual
quality or thickness of the strap used. If
adjustment is necessary, proceed as shown
in the following drawing.

1. In case that there is an insufficient amount of strap

in the Accumulator Box, loosen the Nut
27 and turn the Screw Bolt 28 counterclockwise.

2. In case that there is an excessive amount of

strap in the Accumulator Box, loosen the Nut
27 and turn the Screw Bolt 28 clockwise.

-14-
 01/18/08

10. Installation of Arch Unit

(1) Take the upper table 1 , 15 off.

(2) Take the LH bandway 2 off.
6 TMS, M5x8 1PC 8 TMS, M6x8 2PC
11 HBS, M8x15 4PC 12 SW, M8 4PC
18 PW, M8 (A) 4PC

(3) Slide the the arch unit 3 into the fixing brackets 4 and fix both sides of the arch
frame with 11 12 18 .
* Please noto that is imperative to open the flaps of RH bandway 5 to
protect them when installing the arch unit in. (open the flaps, before inserting the arch
unit in)

(4) Set the LH bandway 2 , with 6 and 8 .

a. Please note that the arch bandway (refer Fig. A) should be positioned between LH
bandway and its fixing bracket.
b. Please set the LH bandway 2 closely to 17 corner guide (PART NO. T6-2-21260).
c. Push the 16 Band guide Spring Bracket backward to check if B will be
automatically turned open. If so, the installation is OK.

(5) Position the upper table 1 15 onto the machine body.

-15-
01/18/08
 01/18/08

11. Wiring Diagram

a. TP-6000-1/TP-6000-1S

3
1

4
2
A

A
B

B
C

C
MACHINE MODEL
D

D
E

E
PAGE
F

F
3
1

4
2

-17-
 01/18/08

b. TP-6000CE1/TP-6000CE1S

4
1

2
A

A
B

B
C

C
MACHINE MODEL
D

D
E

E
PAGE
F

F
3
1

4
2

-18-
 01/18/08

c. TP-6000-3/TP-6000-3S/TP-6000CE3/TP-6000CE3S

3
1

4
2
A

A
B

B
C

C
MACHINE MODEL
D

D
E

E
PAGE
F

F
3

4
1

-19-
01/18/08

A B C D E F
4 4
3 3

-20-
d. TP-6000-3/TP-6000-3S

2 2
1 1
A B C D E F
MACHINE MODEL PAGE
 01/18/08

e. TP-6000CE3/TP-6000CE3S

4
1

2
A

A
B

B
C

C
MACHINE MODEL
D

D
E

E
PAGE
F

F
3

4
1

-21-
01/18/08
 01/18/08

shape classification shape classification

HBS ER

TMS RR

PMS SR

FMS SP

HB BR

THS MB

HSS KYA

CAP KYB

HN KYC

WN HBW
PWA
FLG ∮8x∮12~∮16x0.4~0.8t
∮6x∮13~∮14x0.8~1.5t

PWB
NTE ∮8x∮14~∮16x1.3~1.5t
∮6x∮15~∮16x1.0~1.5t

PWC
PN ∮8x∮20~∮23x2.0t
∮6x∮16~∮19x2.0t

PW PWD

SW DS

TW TTP

BWW FTP
 01/18/08

This bill of material, with the aid of illustrations, all the parts used in the TP-6000.
When ordering, kindly submit a list using the descriptions, part no.s, and
quantities as indicated.

EXPLANATION OF BILL OF MATERIAL

The following instructions are designed to assist you when ordering parts.
1. The parts are illustrated, with indication of their part no.s.
2. As far as the contents or the book are concerned, only the assembly parts
are described, e.g. unit, group, set ,etc.
3
A. If you want to order the control unit on page 1, please indicate the no. at the top
of the page. (T6-1-90000)
B. If you would like to order the tension group (in the strapping head unit), indicate the
no. on page 1 corresponding to tension group. (T6-1-60000) For further details
on the tension group see page 21.
C. If you would like to order the whole tension arm assembly, then indicate no.
(T6-1-61000) on top of page 22.
D. If you would like to order a tension jaw spring only, then indicate the no.
corresponding to the spring on page 22. (T6-1-61140)
4. Part no.s are to be understood as follows (parts exclusively used for TP-6000 machine.)

Please find T6-1-10110 as an example below:

T6…………………………………………………………MODEL NO. (TP-6000)
1……………………………………………UNIT NO. (STRAPPING HEAD UNIT)
10110……………………………………………….PART NO. (TENSION CAM)
 01/18/08

PART II

CONTENTS

1. Strapping Head Unit …………………………………………

1~30

2. Bandway Unit ………………………………………………31~37-4

3. Accumulator Unit ………………………………………… 38~44

4. Reel Unit ……………………………………………………45~51

5. Body Frame Unit ……………………………………………52~61-2

6. Electric Control Unit……………………………………… 62~69-1

 01/18/08

1 STRAPPING HEAD UNIT T6-1-90000

T6-1-90012
T6-1-90013

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-1-90000 Strapping Head Unit (For 12mm) 1
T6-1-90012 Strapping Head Unit (For 9mm) 1
T6-1-90013 Strapping Head Unit (For 15.5mm) 1
1 T6-1-10006 Cam Group (For 1PH) 1 SEE PAGE 2
T6-1-10007 Cam Group (For 3PH) 1
2 T6-1-20005 Slide Table Group (For 12mm) 1 SEE PAGE 5
T6-1-20006 Slide Table Group (For 9mm) 1
T6-1-20007 Slide Table Group (For 15.5mm) 1
3 T6-1-30000 Press Group 1 SEE PAGE 9
4 T6-1-40000 Heater Group 1 SEE PAGE 14
5 T6-1-50000 Strapping Head Group 1 SEE PAGE 18
6 T6-1-60000 Tension Group 1 SEE PAGE 20
7 T6-1-70010 Feed Group (For 12mm) 1 SEE PAGE 27
T6-1-70011 Feed Group (For 9mm) 1
T6-1-70012 Feed Group (For 15.5mm) 1

-1-
 01/18/08

1-1 CAM GROUP T6-1-10006

T6-1-10007

-2-
 01/18/08

1-1 CAM GROUP T6-1-10006

T6-1-10007
REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-1-10006 Cam Group (For 1PH) 1
T6-1-10007 Cam Group (For 3PH) 1
1 T6-1-10110 Tension Cam 1
2 T6-1-10120 Cam Shaft End Plate 1
3 T6-1-10130 Limit Cam (LS1) 1
4 T6-1-10140 Limit Switch Contactor A (LS3) 1
5 T6-1-10150 Limit Switch Contactor B (LS2) 1
6 KYA070720 Key, 7x7x20 2
7 T6-6-30004 Gear Box Pulley 1
8 T6-1-10180 Limit Switch Bracket 1
9 BR6205ZZ Bearing, 6205ZZ 2
10 T6-1-10200 V-Belt (A26) (For 1PH) 1
T6-1-10201 V-Belt (A25) (For 3PH) 1
11 T6-6-10180 Magnet Brake 1

41 T6-1-11000 Gear Box 1

42 T6-1-12000 Cam Ass'y 1 SEE PAGE 4

51 HBS0845H HBS, M8x45 (H) 4

52 HBS0825 HBS, M8x25 1
53 HBS0615 HBS, M6x15 2
54 HSS0610 HSS, M6x10 8
55 PW08B PW, M8 (B) 4
56 SW08 SW, M8 1
57 SW06 SW, M6 2
61 SW04 SW, M4 4
62 PMS0412 PMS, M4x12 4

-3-
 01/18/08

1-1-1 CAM ASS'Y T6-1-12000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-1-12110 Slide Table Cam 1
2 T6-1-12120 RH Press Cam 1
3 T6-1-12130 Center Press Cam 1
4 T6-1-12140 Heater Cam 1
5 T6-1-12150 LH Press Cam 1
6 T6-1-12160 Cam Shaft 1
7 T6-1-12170 Cam Shaft Coupling 1
8 T6-1-12180 Collar, 28.8x34x28.3 1
9 T6-1-12190 Collar, 28.8x34x21 1
10 T6-1-12210 Collar, 28.8x34x8 2
11 T6-1-12220 Collar, 28.8x34x4.5 1
12 T6-1-12230 Collar, 28.8x34x15 1
13 KYB070748 Key, 7x7x48 1
14 KYA070790 Key, 7x7x90 1
15 T6-1-12350 Collar, 28.8x34x27.8 1

51 HBS0620 HBS, M6x20 4

52 HSS0810 HSS, M8x10 1

-4-
 01/18/08

1-2 SLIDE TABLE GROUP T6-1-20005

-5-
 01/18/08

1-2 SLIDE TABLE GROUP T6-1-20005

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-1-20005 Slide Table Group (For 12mm) 1
T6-1-20006 Slide Table Group (For 9mm) 1
T6-1-20007 Slide Table Group (For 15.5mm) 1
1 T6-1-20110 Slide Table Frame 1
2 T6-1-20120 Slide Table Frame Shaft 1
3 T6-1-20130 Slide Table (For 12mm) 1
T6-1-20130S Slide Table (For 12mm)(Stainless Steel Model) 1
T6-1-20133 Slide Table (For 9mm) 1
T6-1-20133S Slide Table (For 9mm)(Stainless Steel Model) 1
T6-1-20132 Slide Table (For 15.5mm) 1
T6-1-20132S Slide Table (For 15.5mm) 1
(Stainless Steel Model)
4 T6-1-20140 Slide Table Back Adjusting 1
5 T6-1-20150 Slide Table Stopper 1
6 T6-1-20160 Slide Table (For S.F.S, 12mm) 1
T6-1-20160S Slide Table (For S.F.S, 12mm) 1
(Stainless Steel Model)
T6-1-20161 Slide Table (For S.F.S, 9mm) 1
T6-1-20161S Slide Table (For S.F.S, 9mm) 1
(Stainless Steel Model)
T6-1-20162 Slide Table (For S.F.S, 15.5mm) 1
T6-1-20162S Slide Table (For S.F.S, 15.5mm) 1
(Stainless Steel Model)
7 T6-1-20170 Strap Guide (For 12mm/9mm) 1
T6-1-20172 Strap Guide (For 15.5mm) 1
8 T6-1-20180 Flap Connecting Spring Bracket 1
9 T6-1-20194 S.F.S Ass'y (For 12mm) 1
T6-1-20191 S.F.S Ass'y (For 9mm) 1
T6-1-20192 S.F.S Ass'y (For 15.5mm) 1
10 T6-1-20210 End Plate 1
11 T6-1-20220 Slide Table Spring Hook 1
12 T6-1-20230 Slide Table Tension Spring 1
14 BR6304ZZ Bearing, 6304ZZ 2
15 T6-1-20250 Cam Follower, KR22xLL 1
16 ER15 Snap Ring, E-15 2
17 T6-1-20310 Support 1
18 T6-1-20320 Lever 1

-6-
 01/18/08

1-2 SLIDE TABLE GROUP T6-1-20005

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
19 T6-1-20340 Bracket 1
20 T6-1-20351 Spring 1
21 T6-1-20360 Limit Switch 1
41 T6-1-21000 Strap Guide Arm Ass'y 1 SEE PAGE 7
42 T6-1-22000 Strap Guide Spring Ass'y 1 SEE PAGE 8
51 HBS1050H HBS, M10x50 (H) 1
52 HBS0830 HBS, M8x30 1
53 HBS0650H HBS, M6x50 (H) 1
54 HBS0620N HBS, M6x20 (N) 4
HBS0620S HBS, M6x20 (Stainless Steel Model) 4
55 HBS0620 HBS, M6x20 1
56 HSS0810 HSS, M8x10 4
57 TMS0610 TMS, M6x10 2
58 HN10 HN, M10 1
60 PW08A PW, M8 (A) 1
61 PW06A PW, M6 (A) 4
62 SW10 SW, M10 1
63 SW06 SW, M6 4
64 HBS0620 HBS, M6x20 2
65 HBS0408 HBS, M4x8 2
66 TMS0412 TMS, M4x12 1

69 PMS0212 PMS, M2x12 2

71 SW04 SW, M4 2
73 HN02 HN, M2 2
74 NTE04 NTE, M4 1
76 HN06 HN, M6 3
77 SW02 SW, M2 2

79 T6-1-20890 Cover 1
T6-1-20890S Cover(Stainless Steel Model) 1
80 FMS0510 FMS, M5x10 2
FMS0510S FMS, M5x10 (Stainless Steel Model) 2
81 HBS0615 HBS, M6x15 1
82 T6-2-10130 LH Bandway Stop Spring 1

-6-1-
 01/18/08

1-2-1 STRAP GUIDE ARM ASS'Y T6-1-21000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-1-21110 Strap Guide Arm 1
2 MB2025 Metal Bush, 2025 2

-7-
 01/18/08

1-2-2 STRAP GUIDE SPRING ASS'Y T6-1-22000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-1-22110 Strap Guide Spring 1
2 T6-1-22120 Strap Guide Spring Bracket 1

51 HBS0615 HBS, M6x15 1

52 HN06 HN, M6 1

-8-
 01/18/08

1-3 PRESS GROUP T6-1-30000

-9-
 01/18/08

1-3 PRESS GROUP T6-1-30000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-1-30110 Press Arm Shaft 1
2 T6-1-30120 Cutter Tension Spring Hook 1
3 T6-1-30130 Upper Roller Spring 1
4 T6-1-30140 Upper Shaft Spring Adjuster 1
5 T6-1-30150 Press Tension Spring 3
6 T6-1-30160 Cutter Tension Spring 1
7 T6-1-30170 Press Arm End Plate 1
8 BR6304ZZ Bearing, 6304ZZ 2
9 ER15 Snap Ring, E-15 1

41 T6-1-31000 RH, Block Arm Ass'y 1 SEE PAGE 11

42 T6-1-32000 Center Block Arm Ass'y 1 SEE PAGE 12
43 T6-1-33000 LH, Block Arm Ass'y 1 SEE PAGE 13

51 HBS0620 HBS, M6x20 1

52 HSS0615 HSS, M6x15 2
53 TMS0610 TMS, M6x10 2
54 HN08 HN, M8 2
55 HN06 HN, M6 2
56 PW08A PW, M8 (A) 1
57 PW06B PW, M6 (B) 2
58 SW06 SW, M6 1

-10-
 01/18/08

1-3-1 RH, BLOCK ARM ASS'Y T6-1-31000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-1-31110 RH, Block Arm 1
2 T6-1-31120 Upper Cutter 1
T6-1-31120S Upper Cutter (Stainless Steel Model) 1
3 T6-1-31130 Upper Cutter Pin 1
4 T6-1-31140 RH, Block Spring 1
5 BR628ZZ Bearing, 628ZZ 1
6 SP0824 Spring Pin, 8x24 1

51 HBS0835H HBS, M8x35 (H) 2

52 HN10 HN, M10 1

-11-
 01/18/08

1-3-2 CENTER BLOCK ARM ASS'Y T6-1-32000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-1-32110 Center Block Arm 1
2 T6-1-32120 Universal Press 1
T6-1-32120S Universal Press (Stainless Steel Model) 1
3 T6-1-32130 Lower Cutter 1
T6-1-32130S Lower Cutter (Stainless Steel Model) 1
4 T6-1-32140 Cutter Spring Hook 1
5 T6-1-32150 LH & Center Block Spring 1
6 BR628ZZ Bearing, 628ZZ 1
7 SP0820 Spring Pin, 8x20 1
8 SP0622 Spring Pin, 6x22 1
9 MB2025 Metal Bush, 2025 1

51 FMS0510S FMS, M5x10 (SUS) 2

52 PMS0610 PMS, M6x10 1
53 PW06A PW, M6 (A) 1
54 SW06 SW, M6 1

-12-
 01/18/08

1-3-3 LH, BLOCK ARM ASS'Y T6-1-33000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-1-33110 LH, Block Arm 1
2 T6-1-33120 Jaw Left 1
3 T6-1-32150 LH & Center Block Spring 1
4 BR628ZZ Bearing, 628ZZ 1
5 SP0820 Spring Pin, 8x20 1
6 SP0622 Spring Pin, 6x22 1
7 MB2020 Metal Bush, 2020 2

-13-
 01/18/08

1-4 HEATER GROUP T6-1-40000

-14-
 01/18/08

1-4 HEATER GROUP T6-1-40000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-1-40110 Heater Cover 1
2 T6-1-40120 Heater Crank Spring 1
3 T6-1-40130 Heater Slider Guide (L) 1
4 T6-1-40140 Heater Slider Guide (R) 1
5 T6-1-40150 Heater Crank Shaft 1
6 ER15 Snap Ring, E-15 2
7 T6-1-40170 Heater Stopper 1
8 LA-40002 Label 1

41 T6-1-41000 Heater Ass'y 1

42 T6-1-42000 Heater Crank Ass'y 1 SEE PAGE 17
43 T6-1-43000 Smoke-exhaustion system, with active 1 SEE PAGE 63
carbon filter. (Option)
T6-1-43001 Smoke-exhaustion system, without 1 SEE PAGE 63
active carbon filter. (Option)

51 HSS0610 HSS, M6x10 2

52 HBS0615 HBS, M6x15 4

-15-
 01/18/08

-16-
 01/18/08

1-4-2 HEATER CRANK ASS'Y T6-1-42000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-1-42110 Heater Crank 1
2 T6-1-42120 Heater Bearing Shaft 1
3 T6-1-42130 Heater Crank Collar 1
4 BR6304ZZ Bearing, 6304ZZ 1
5 MB2015 Metal Bush, 2015 2
6 ER15 Snap Ring, E-15 2

51 HN08 HN, M8 2

-17-
 01/18/08

1-5 STRAPPING HEAD GROUP T6-1-50000

-18-
 01/18/08

1-5 STRAPPING HEAD GROUP T6-1-50000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-1-50100 Strapping Head Frame 1
2 T6-1-50111 Strap Width Block 1

51 HBS0820 HBS, M8x20 4

52 HBS0620 HBS, M6x20 1
54 PW06B PW, M6 (B) 1
55 SW08 SW, M8 4
56 PW08C PW, M8 (C) 4

-19-
 01/18/08

1-6 TENSION GROUP T6-1-60000

-20-
 01/18/08

1-6 TENSION GROUP T6-1-60000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-1-60110 Tension Arm Shaft 1
2 T6-1-60120 Tension Arm Spring 1
3 T6-1-60130 Tension Adjusting Arm Spring 1
4 T6-1-60140 Tension Arm Spacer 1
5 T6-1-60150 Strap Cover 1
6 T6-1-60160 Tension Arm Spring Hook L-Type 1
7 BRHK2516 Bearing, HK2516 2
8 ER15 Snap Ring, E-15 2

11 BRIR202517 Bearing, IR202517 2

20 SP0680 Spring Pin, 6x80 1

41 T6-1-61000 Tension Arm Ass'y 1 SEE PAGE 22

42 T6-1-62000 Tension Jaw Ass'y 1
T6-1-62000S Tension Jaw Ass'y (Stainless Steel Model) 1
43 T6-1-63001 Tension Adjusting Cam Ass'y 1 SEE PAGE 24
44 T6-1-64000 Tension Adjusting Ass'y 1 SEE PAGE 25
45 T6-1-65000 Tension Adjusting Arm Ass'y 1 SEE PAGE 26
46 T6-1-63000 Tension Adjusting Cam Ass'y (Option) 1 SEE PAGE 23

52 HBS0512 HBS, M5x12 2

53 HN08 HN, M8 2
55 SW05 SW, M5 2
56 PW05 PW, M5 2

-21-
 01/18/08

1-6-1 TENSION ARM ASS'Y T6-1-61000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-1-61110 Tension Arm 1
2 T6-1-61120 Tension Jaw Shaft 1
3 T6-1-61130 Tension Arm Spring Hook I-Type 1
4 T6-1-61140 Tension Jaw Spring 1
5 T6-1-20250 Cam Follower, KR22xLL 1
6 ER06 Snap Ring, E-6 1

51 HSS0810 HSS, M8x10 2

52 HN08 HN, M8 1
53 SW10 SW, M10 1
54 HN10 HN, M10 1

-22-
 01/18/08

1-6-3 T6-1-63000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-1-63110 Tension Adjusting Cam 1
2 T6-1-63120 Tension Adjusting Shaft 1
3 T6-1-63130 Plate (Tension Selector Knob) 1
4 T6-1-63140 Tension Adjusting Cam Spring 1
5 T6-1-63018 Tension Adjusting Cam Lock 1

8 T6-1-63170 Tension ADJ Bolt Spacer 1

9 T6-1-63180 Tension Indicated Arm 1

51 HBS0620 HBS, M6x20 1

52 HBS0515 HBS, M5x15 1
53 PMS0508 PMS, M5x8 1

55 SW05 SW, M5 2
56 SR20 Stop Ring, S-20 1
57 SW06 SW, M6 1

-23-
 01/18/08

1-6-3 TENSION ADJUSTING CAM ASS'Y T6-1-63001

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-1-63011 Tension Adjusting Handle 1
2 T6-1-63012 Tension Adjusting Shaft 1
3 T6-1-63130 Plate (Tension Selector Knob) 1
4 T6-1-63014 Tension Adjusting Cam 1
5 T6-1-63015 Bush 1
6 T6-1-63016 Support 1
T6-1-63016S Support (Stainless Steel Model) 1
7 T6-1-63017 Stopper 1
8 T6-1-63018 Tension Adjusting Cam Lock 1
9 T6-1-63019 Spring 1
10 HBS0625 HBS, M6x25 1
11 HBS0620 HBS, M6x20 2
12 HBS0516 HBS, M5x16 1
13 PMS0412 PMS, M4x12 2
14 HSS0608 HSS, M6x8 1
15 PW05 PW, M5 1
16 PW04 PW, M4 2
17 SW05 SW, M5 1

-24-
 01/18/08

1-6-3 TENSION ADJUSTING CAM ASS'Y T6-1-63001

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
18 NTE06 NTE, M6 1
19 HN05 HN, M5 1
20 SR12 Stop Ring, S-12 3
21 T6-1-63031 Bracket 1
T6-1-63031S Bracket (Stainless Steel Model) 1

23 TMS0508 TMS, M5x8 2

24 T6-1-63034 Washer 1
25 SW06 SW, M6 6
26 HBS0610 HBS, M6x10 1
27 FMS0620S FMS, M6x20 (SUS) 4
28 HN06 HN, M6 4
29 PW06A PW, M6 (A) 4

-24-1-
 01/18/08

1-6-4 TENSION ADJUSTING ASS'Y T6-1-64000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-1-64110 Tension Adjusting 1
2 MB2015 Metal Bush, 2015 1
3 SP0645 Spring Pin, 6x45 1

-25-
 01/18/08

1-6-5 TENSION ADJUSTING ARM ASS'Y T6-1-65000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-1-65110 Tension Adjusting Arm 1
2 T6-1-65120 Tension Adjusting Arm Spring Hook 1
3 MB2015 Metal Bush, 2015 1
4 SP0645 Spring Pin, 6x45 1

-26-
 01/18/08

1-7 FEED GROUP T6-1-70010

T6-1-70011
T6-1-70012

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-1-70010 Feed Group (For 12mm) 1
T6-1-70011 Feed Group (For 9mm) 1
T6-1-70012 Feed Group (For 15.5mm) 1
1 T6-1-70110 V-Belt M-21 1

41 T6-1-71000 Feed Ass'y (For 12mm) 1 SEE PAGE 28

T6-1-71004 Feed Ass'y (For 9mm) 1
T6-1-71005 Feed Ass'y (For 15.5mm) 1
42 T6-1-72000 Upper Adjusting Weight Ass'y 1 SEE PAGE 30

-27-
 01/18/08

1-7-1 FEED ASS'Y T6-1-71000

-28-
 01/18/08

1-7-1 FEED ASS'Y T6-1-71000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-1-71000 Feed Ass'y (For 12mm) 1
T6-1-71004 Feed Ass'y (For 9mm) 1
T6-1-71005 Feed Ass'y (For 15.5mm) 1
2 T6-1-71120 Upper Feed Roller (For 12mm) 1
T6-1-71120S Upper Feed Roller (For 12mm) 1
(Stainless Steel Model)
T6-1-71121 Upper Feed Roller (For 9mm) 1
T6-1-71121S Upper Feed Roller (For 9mm) 1
(Stainless Steel Model)
T6-1-71122 Upper Feed Roller (For 15.5mm) 1
T6-1-71122S Upper Feed Roller (For 15.5mm) 1
(Stainless Steel Model)
3 T6-1-71130 Upper Feed Roller Shaft 1
4 T6-1-71140 Feed Roller 1
T6-1-71140S Feed Roller (Stainless Steel Model) 1
5 T6-1-71150 Lever Holder 1
6 T6-1-71160 Feed Roller Pulley 1
7 T6-1-71170 Feed Shooter (For 12mm) 1
T6-1-71170S Feed Shooter (For 12mm) 1
(Stainless Steel Model)
T6-1-71171 Feed Shooter (For 9mm) 1
T6-1-71171S Feed Shooter (For 9mm) 1
(Stainless Steel Model)
T6-1-71172 Feed Shooter (For 15.5mm) 1
T6-1-71172S Feed Shooter (For 15.5mm) 1
(Stainless Steel Model)
8 T6-1-71180 Feed Shooter Cover 1
T6-1-71180S Feed Shooter Cover (Stainless Steel Model) 1
9 T6-1-71190 Upper Feed Roller Set (For 12mm) 1
T6-1-71190S Upper Feed Roller Set (For 12mm) 1
(Stainless Steel Model)
T6-1-71191 Upper Feed Roller Set (For 9mm) 1
T6-1-71191S Upper Feed Roller Set (For 9mm) 1
(Stainless Steel Model)
T6-1-71192 Upper Feed Roller Set (For 15.5mm) 1
T6-1-71192S Upper Feed Roller Set (For 15.5mm) 1
(Stainless Steel Model)

-29-
 01/18/08

1-7-1 FEED ASS'Y T6-1-71000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
10 BR628ZZ Bearing, 628ZZ 1
11 BR6202ZZ Bearing, 6202ZZ 4
12 RR24 Snap Ring, H-24 2
13 RR35 Snap Ring, H-35 4
14 ER12 Snap Ring, E-12 1
51 HBS0645H HBS, M6x45 (H) 2
HBS0645HS HBS, M6x45 (H)(Stainless Steel Model) 2
52 HBS0615 HBS, M6x15 1
53 HSS0615 HSS, M6x15 1
54 HSS0610 HSS, M6x10 2
55 PMS0610 PMS, M6x10 2
PMS0610S PMS, M6x10 (Stainless Steel Model) 2
56 HN06 HN, M6 2

-29-1-
 01/18/08

1-7-2 T6-1-72000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-1-72110 Upper Adjusting Base 1
2 T6-1-72120 Upper Adjusting Spring Hook 1
3 T6-1-72130 Upper Adjusting Spring Rod 1
4 T6-1-72140 Spring 1

51 HBS0512 HBS, M5x12 2

52 HN06 HN, M6 2
53 SW05 SW, M5 2

-30-
 01/18/08

2 BANDWAY UNIT T6-2-90008

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-2-10000 Bandway Group (For 12mm) 1 SEE PAGE 32
T6-2-10004 Bandway Group (For 9mm) 1
T6-2-10010 Bandway Group (For 15.5mm) 1
2 T6-2-20000 Chute Arch Group 1 SEE PAGE 35

-31-
 01/18/08

2-1 BANDWAY GROUP T6-2-10000

40

-32-
 01/18/08

2-1 BANDWAY GROUP T6-2-10000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-2-10000 Bandway Group (For 12mm) 1
T6-2-10004 Bandway Group (For 9mm) 1
T6-2-10010 Bandway Group (For 15.5mm)
40 T6-2-10100 RH Bandway Ass'y (Only 650W, 12mm) 1
T6-2-10101 RH Bandway Ass'y (Only 650W, 9mm) 1
T6-2-10102 RH Bandway Ass'y (Only 650W, 15.5mm) 1
41 T6-2-11000 RH Bandway Ass'y (For 12mm) 1 SEE PAGE 33
T6-2-11001 RH Bandway Ass'y (For 9mm) 1
T6-2-11002 RH Bandway Ass'y (For 15.5mm) 1
T6-2-11010 RH Bandway Ass'y (Only 650W, 12mm) 1
T6-2-11011 RH Bandway Ass'y (Only 650W, 9mm) 1
T6-2-11012 RH Bandway Ass'y (Only 650W, 15.5mm) 1
42 T6-2-12000 LH Bandway Ass'y (For 850W, 12mm 1 SEE PAGE 34
/15.5mm)
T6-2-12001 LH Bandway Ass'y (For 850W, 9mm) 1
T6-2-12010 LH Bandway Ass'y (For 650W, 12mm 1
/15.5mm)
T6-2-12011 LH Bandway Ass'y (For 650W, 9mm) 1
T6-2-12020 LH Bandway Ass'y (For 1050W, 12mm 1
/15.5mm)
T6-2-12021 LH Bandway Ass'y (For 1050W, 9mm) 1
T6-2-12030 LH Bandway Ass'y (For 1250W, 12mm 1
/15.5mm)
T6-2-12031 LH Bandway Ass'y (For 1250W, 9mm) 1
T6-2-12040 LH Bandway Ass'y (For 1450W, 12mm 1
/15.5mm)
T6-2-12041 LH Bandway Ass'y (For 1450W, 9mm) 1
T6-2-12050 LH Bandway Ass'y (For 1650W, 12mm 1
/15.5mm)
T6-2-12051 LH Bandway Ass'y (For 1650W, 9mm) 1
T6-2-12060 LH Bandway Ass'y (For 1850W, 12mm 1
/15.5mm)
T6-2-12061 LH Bandway Ass'y (For 1850W, 9mm) 1
T6-2-12070 LH Bandway Ass'y (For 2050W, 12mm 1
/15.5mm)
T6-2-12071 LH Bandway Ass'y (For 2050W, 9mm) 1

-32-1-
 01/18/08

2-1 BANDWAY GROUP T6-2-10000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-2-12080 LH Bandway Ass'y (For 2250W, 12mm 1
/15.5mm)
T6-2-12081 LH Bandway Ass'y (For 2250W, 9mm) 1
43 T6-2-10670 Bracket (For 650W) 1
51 TMS0608 TMS, M6x8 4
53 HBS0650 HBS, M6x50 1
54 TMS0508 TMS, M5x8 1
56 HN06 HN, M6 2
HN, M6 (Only 650W) 4
57 PW06A PW, M6(A) 2

59 SW06 SW, M6 (For 650W) 2

SW06S SW, M6 (Stainless Steel Model) 2
(For 650W)
60 TMS0612 TMS, M6x12 (For 650W) 2
TMS0612S TMS, M6x12 (Stainless Steel Model) 2
(For 650W)

-32-2-
 01/18/08

2-1-1 RH RANDWAY ASS'Y T6-2-11000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-2-11000 RH Bandway Ass'y (For 12mm) 1
T6-2-11001 RH Bandway Ass'y (For 9mm) 1
T6-2-11002 RH Bandway Ass'y (For 15.5mm) 1
T6-2-11010 RH Bandway Ass'y (Only 650W, 12mm) 1
T6-2-11011 RH Bandway Ass'y (Only 650W, 9mm) 1
T6-2-11012 RH Bandway Ass'y (Only 650W, 15.5mm) 1
1 T6-2-11110 RH Bandway (For 12mm) 1
T6-2-11111 RH Bandway (For 9mm) 1
T6-2-11114 RH Bandway (For 15.5mm) 1
T6-2-11112 RH Bandway (For 650W, 12mm) 1
T6-2-11113 RH Bandway (For 650W, 9mm) 1
T6-2-11115 RH Bandway (For 650W, 15.5mm) 1
2 T6-2-11120 RH Bandway Rear Flap (For 12mm) 1
T6-2-11121 RH Bandway Rear Flap (For 9mm) 1
T6-2-11124 1
T6-2-11122 1
T6-2-11123 RH Bandway Rear Flap (Only 650W, 9mm) 1
T6-2-11125 1
3 T6-2-11130 RH Bandway Front Flap (For 12mm) 1
T6-2-11131 RH Bandway Front Flap (For 9mm) 1
T6-2-11134 RH Bandway Front Flap (For 15.5mm) 1
T6-2-11132 1

T6-2-11135 1

-33-
 01/18/08

2-1-1 RH BANDWAY ASS'Y T6-2-11000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
4 T6-2-11140 RH Bandway Flap Pin (Rear) 2
RH Bandway Flap Pin (Rear) 1
(Only 650W, 9mm)
5 T6-2-11150 RH Bandway Flap Spring 2
RH Bandway Flap Spring 1
(Only 650W, 9mm)
6 T6-2-11160 RH Bandway Flap Pin (Front) 2
RH Bandway Flap Pin (Front) 1
(Only 650W, 9mm)

-33-1-
 01/18/08

2-1-2 LH BANDWAY ASS'Y T6-2-12000

T6-2-12001

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-2-12000 LH Bandway Ass'y (12mm/15.5mm)
T6-2-12001 LH Bandway Ass'y (9mm)
1 T6-2-12110 LH Bandway (For 850W, 12mm/15.5mm) 1
T6-2-12200 LH Bandway (For 850W, 9mm) 1
T6-2-12111 LH Bandway (For 650W, 12mm/15.5mm) 1
T6-2-12201 LH Bandway (For 650W, 9mm) 1
T6-2-12112 1
T6-2-12202 LH Bandway (For 1050W, 9mm) 1
T6-2-12113 1
T6-2-12203 LH Bandway (For 1250W, 9mm) 1
T6-2-12114 1
T6-2-12204 LH Bandway (For 1450W, 9mm) 1
T6-2-12115 1
T6-2-12205 LH Bandway (For 1650W, 9mm) 1
T6-2-12116 1
T6-2-12206 LH Bandway (For 1850W, 9mm) 1
T6-2-12117 1
T6-2-12207 LH Bandway (For 2050W, 9mm) 1
T6-2-12118 1
T6-2-12208 LH Bandway (For 2250W, 9mm) 1

-34-
 01/18/08

2-1-2 LH BANDWAY ASS'Y T6-2-12000

T6-2-12001
REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
2 T6-2-12120 LH Bandway Flap (For 850W, 12mm/15.5mm) 1
T6-2-12210 LH Bandway Flap (For 850W, 9mm) 1
T6-2-12121 LH Bandway Flap (For 650W, 12mm/15.5mm) 1
T6-2-12211 LH Bandway Flap (For 650W, 9mm) 1
T6-2-12122 LH Bandway Flap (For 1050W, 12mm/15.5mm) 1
T6-2-12212 LH Bandway Flap (For 1050W, 9mm) 1
T6-2-12123 LH Bandway Flap (For 1250W, 12mm/15.5mm) 1
T6-2-12213 LH Bandway Flap (For 1250W, 9mm) 1
T6-2-12124 LH Bandway Flap (For 1450W, 12mm/15.5mm) 1
T6-2-12214 LH Bandway Flap (For 1450W, 9mm) 1
T6-2-12125 LH Bandway Flap (For 1650W, 12mm/15.5mm) 1
T6-2-12215 LH Bandway Flap (For 1650W, 9mm) 1
T6-2-12126 LH Bandway Flap (For 1850W, 12mm/15.5mm) 1
T6-2-12216 LH Bandway Flap (For 1850W, 9mm) 1
T6-2-12127 LH Bandway Flap (For 2050W, 12mm) 1
T6-2-12217 LH Bandway Flap (For 2050W, 9mm) 1
T6-2-12128 LH Bandway Flap (For 2250W, 12mm/15.5mm) 1
T6-2-12218 LH Bandway Flap (For 2250W, 9mm) 1

3 T6-2-12130 LH Bandway Flap Pin (For 650W~1050W) 2

LH Bandway Flap Pin (For 1250W~1450W) 3
LH Bandway Flap Pin (For 1650W~2250W) 4

4 T6-2-12140 LH Bandway Flap Spring (For 650~1050W) 1

LH Bandway Flap Spring (For 1250~1450W) 2
LH Bandway Flap Spring (For 1650~2250W) 3

5 T6-2-12150 LH Bandway Flap Spring 1

6 T6-2-12180 Pillar (For 1450W~1850W) 1
Pillar (For 2050W~2250W) 2

11 TMS0508 TMS, M5x8 (For 1450W~1850W) 1

TMS, M5x8 (For 2050W~2250W) 2

-34-1-
 01/18/08

2-2 CHUTE ARCH GROUP T6-2-20000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
41 T6-2-21000 Arch Ass'y 1 SEE PAGE 36

51 HBS0816 HBS, M8x16 4

HBS0816S HBS, M8x16 (Stainless Steel Model) 4
52 PW08A PW, M8 (A) 4
PW08AS PW, M8 (A) (Stainless Steel Model) 4
53 SW08 SW, M8 4
SW08S SW, M8 (Stainless Steel Model) 4

-35-
 01/18/08

2-2-1 ARCH ASS'Y T6-2-21000

-36-
 01/18/08

2-2-1 ARCH ASS'Y T6-2-21000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-2-20110 Arch Frame (For 850W x 600H) 1
T6-2-20110S Arch Frame (Stainless Steel Model) 1
(For 850W x 600H)
2 T6-2-20120 Arch Bandway (For 850W x 600H) 1
3 T6-2-20130 Arch Cover, Front (For 850W x 600H) 1
T6-2-20130S Arch Cover, Front (Stainless Steel Model) 1
(For 850W x 600H)
4 T6-2-20140 Arch Cover, Rear (For 850W x 600H) 1
T6-2-20140S Arch Cover, Rear (Stainless Steel Model) 1
(For 850W x 600H)
5 T6-2-20150 Upper Guide Rail (For 850W) 1
T6-2-20150S Upper Guide Rail (Stainless Steel Model) 1
(For 850W)
T6-2-20151 Upper Guide Rail (For 1050W) 1
T6-2-20151S Upper Guide Rail (Stainless Steel Model) 1
(For 1050W)
T6-2-20152 Upper Guide Rail (For 1250W) 1
T6-2-20152S Upper Guide Rail (Stainless Steel Model) 1
(For 1250W)
T6-2-20153 Upper Guide Rail (For 1450W) 1
T6-2-20153S Upper Guide Rail (Stainless Steel Model) 1
(For 1450W)
T6-2-20154 Upper Guide Rail (For 1650W) 1
T6-2-20154S Upper Guide Rail (Stainless Steel Model) 1
(For 1650W)
T6-2-20155 Upper Guide Rail (For 1850W) 1
T6-2-20155S Upper Guide Rail (Stainless Steel 1
Model)(For 1850W)
T6-2-20156 Upper Guide Rail (For 2050W) 1
T6-2-20156S Upper Guide Rail (Stainless Steel 1
Model)(For 2050W)
T6-2-20157 Upper Guide Rail (For 2250W) 1
T6-2-20157S Upper Guide Rail (Stainless Steel 1
Model)(For 2250W)
T6-2-20159 Upper Guide Rail (For 650W) 1
T6-2-20159S Upper Guide Rail (Stainless Steel 1
Model)(For 650W)

-37-
 01/18/08

2-2-1 ARCH ASS'Y T6-2-21000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
6 T6-2-20160 RH Side Guide Rail (For 600H) 1
T6-2-20160S RH Side Guide Rail (Stainless Steel 1
Model)(For 600H)
T6-2-20161 RH Side Guide Rail (For 800H) 1
T6-2-20161S RH Side Guide Rail (Stainless Steel 1
Model)(For 800H)
T6-2-20162 RH Side Guide Rail (For 1000H) 1
T6-2-20162S RH Side Guide Rail (Stainless Steel 1
Model)(For 1000H)
T6-2-20163 RH Side Guide Rail (For 1200H) 1
T6-2-20163S RH Side Guide Rail (Stainless Steel 1
Model)(For 1200H)
T6-2-20164 RH Side Guide Rail (For 1400H) 1
T6-2-20164S RH Side Guide Rail (Stainless Steel 1
Model)(For 1400H)
T6-2-20169 RH Side Guide Rail (For 400H) 1
T6-2-20169S RH Side Guide Rail (Stainless Steel 1
Model)(For 400H)
7 T6-2-20170 LH Side Guide Rail (For 600H) 1
T6-2-20170S LH Side Guide Rail (Stainless Steel 1
Model)(For 600H)
T6-2-20171 LH Side Guide Rail (For 800H) 1
T6-2-20171S LH Side Guide Rail (Stainless Steel 1
Model)(For 800H)
T6-2-20172 LH Side Guide Rail (For 1000H) 1
T6-2-20172S LH Side Guide Rail (Stainless Steel 1
Model)(For 1000H)
T6-2-20173 LH Side Guide Rail (For 1200H) 1
T6-2-20173S LH Side Guide Rail (Stainless Steel 1
Model)(For 1200H)

T6-2-20179 LH Side Guide Rail (For 400H) 1

T6-2-20179S LH Side Guide Rail (Stainless Steel 1
Model)(For 400H)

-37-1-
 01/18/08

2-2-1 ARCH ASS'Y T6-2-21000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
8 T6-2-20180 Corner Guide Rail, Upper 4
T6-2-20180S Corner Guide Rail, Upper 4
(Stainless Steel Model)
9 T6-2-20190 Corner Guide Rail, Lower (LH) 1
T6-2-20190S Corner Guide Rail, Lower (LH) 1
(Stainless Steel Model)
10 T6-2-20200 Corner Guide Rail, Lower (RH) 1
T6-2-20200S Corner Guide Rail, Lower (RH) 1
(Stainless Steel Model)
11 T6-2-20210 Guide Rail Hinge (1) (For 850Wx600H) 11
12 T6-2-20220 K-Type Guide Rail Hinge Shaft 12
(For 850Wx600H)
13 T6-2-20230 Guide Rail Hinge (2) 1
14 T6-2-20240 Guide Rail Hinge Shaft (For 850Wx600H) 11
15 T6-2-21250 Arch Guide Rail Spring (For 850Wx600H) 11
16 T6-2-21260 Guiding Angle, LH Front 1
T6-2-21260S Guiding Angle, LH Front 1
(Stainless Steel Model)
18 T6-2-21280 Guiding Angle, RH Front 1
T6-2-21280S Guiding Angle, RH Front 1
(Stainless Steel Model)
19 T6-2-21290 Guiding Angle, RH Rear 1
T6-2-21290S Guiding Angle, RH Rear 1
(Stainless Steel Model)
24 T6-2-20340 Back Guide Plate, Upper (For 850W) 1
T6-2-20340S Back Guide Plate, Upper 1
(Stainless Steel Model)(For 850W)
T6-2-20341 Back Guide Plate, Upper (For 1050W) 1
T6-2-20341S Back Guide Plate, Upper 1
(Stainless Steel Model)(For 1050W)
T6-2-20342 Back Guide Plate, Upper (For 1250W) 1
T6-2-20342S Back Guide Plate, Upper 1
(Stainless Steel Model)(For 1250W)
T6-2-20343 Back Guide Plate, Upper (For 1450W) 1
T6-2-20343S Back Guide Plate, Upper 1
(Stainless Steel Model)(For 1450W)

-37-2-
 01/18/08

2-2-1 ARCH ASS'Y T6-2-21000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-2-20344 Back Guide Plate, Upper (For 1650W) 1
T6-2-20344S Back Guide Plate, Upper 1
(Stainless Steel Model)(For 1650W)
T6-2-20345 Back Guide Plate, Upper (For 1850W) 1
T6-2-20345S Back Guide Plate, Upper 1
(Stainless Steel Model)(For 1850W)
T6-2-20346 Back Guide Plate, Upper (For 2050W) 1
T6-2-20346S Back Guide Plate, Upper 1
(Stainless Steel Model)(For 2050W)
T6-2-20347 Back Guide Plate, Upper (For 2250W) 1
T6-2-20347S Back Guide Plate, Upper 1
(Stainless Steel Model)(For 2250W)
T6-2-20349 Back Guide Plate, Upper (For 650W) 1
T6-2-20349S Back Guide Plate, Upper 1
(Stainless Steel Model)(For 650W)

25 T6-2-21350 Back Guide Plate, Side (For 600H) 2

T6-2-21350S Back Guide Plate, Side 2
(Stainless Steel Model)(For 600H)
T6-2-21351 Back Guide Plate, Side (For 800H) 2
T6-2-21351S Back Guide Plate, Side 2
(Stainless Steel Model)(For 800H)
T6-2-21352 Back Guide Plate, Side (For 1000H) 2
T6-2-21352S Back Guide Plate, Side 2
(Stainless Steel Model)(For 1000H)
T6-2-21353 Back Guide Plate, Side (For 1200H) 2
T6-2-21353S Back Guide Plate, Side 2
(Stainless Steel Model)(For 1200H)
T6-2-21354 Back Guide Plate, Side (For 1400H) 2
T6-2-21354S Back Guide Plate, Side 2
(Stainless Steel Model)(For 1400H)
T6-2-21359 Back Guide Plate, Side (For 400H) 2
T6-2-21359S Back Guide Plate, Side 2
(Stainless Steel Model)(For 400H)
26 T6-2-21360 Back Guide Plate, Corner Upper 2
T6-2-21360S Back Guide Plate, Corner Upper 2
(Stainless Steel Model)

-37-3-
 01/18/08

2-2-1 ARCH ASS'Y T6-2-21000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
27 T6-2-21370 Back Guide Plate, LH Lower 1
T6-2-21370S Back Guide Plate, LH Lower 1
(Stainless Steel Model)
28 T6-2-21380 Back Guide Plate, RH Lower 1
T6-2-21380S Back Guide Plate, RH Lower 1
(Stainless Steel Model)
29 PN04 PN, ∮4 (For 850Wx600H) 12
PN04S PN, ∮4 (Stainless Steel Model) 12
(For 850Wx600H)
PN, ∮4 (SUS)(Option)(For 850Wx600H) 12

52 TMS0508S TMS, M5x8 (SUS) 8

53 TMS0408 TMS, M4x8 (For 850Wx600H) 72
TMS0408S TMS, M4x8 (Stainless Steel Model) 72
(For 850Wx600H)
54 HBS0440H HBS, M4x40 (H) 1
HBS0440HS HBS, M4x40 (H)(Stainless Steel Model) 1
55 HN04 HN, M4 1
HN04S HN, M4 (Stainless Steel Model) 1
56 SW04 SW, M4 1
SW04S SW, M4 (Stainless Steel Model) 1

-37-4-
 01/18/08

3 ACCUMULATOR UNIT T6-3-90004

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-3-90004 Accumulator Unit (For 12mm) 1
T6-3-90005 Accumulator Unit (For 15.5mm) 1
T6-3-90008 Accumulator Unit (For 9mm) 1
1 T6-3-10000 Accumulator Group (For 12mm) 1 SEE PAGE 39
T6-3-10003 Accumulator Group (For 9mm) 1
T6-3-10004 Accumulator Group (For 15.5mm) 1
2 T6-3-20000 Accumulator Box Group (For 12mm) 1 SEE PAGE 43
T6-3-20003 Accumulator Box Group (For 9mm) 1
T6-3-20004 Accumulator Box Group (For 15.5mm) 1

-38-
 01/18/08

3-1 ACCUMULATOR GROUP T6-3-10000

-39-
 01/18/08

3-1 ACCUMULATOR GROUP T6-3-10000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-3-10000 Accumulator Group (For 12mm) 1
T6-3-10003 Accumulator Group (For 9mm) 1
T6-3-10004 Accumulator Group (For 15.5mm) 1
1 T6-3-10110 Balance Bar (For 12mm) 1
T6-3-10111 Balance Bar (For 9mm) 1
T6-3-10112 Balance Bar (For 15.5mm) 1
2 T6-3-10120 Accumulator Balance Spring 1
3 T6-3-10130 Accumulator Adjusting Bolt 1
T6-3-10130S Accumulator Adjusting Bolt 1
(Stainless Steel Model)
5 T6-3-10150 Accumulator Spring Adjusting 1
6 T6-1-72140 Spring 1
7 T6-3-10170 Label (Direction) 1
8 T6-3-10181 V-Belt, M-27 1
9 T6-3-10190 Balance Bar Spacer (For12mm/15.5mm) 1
10 T6-3-10200 Twist Stopper 1
12 T6-3-10220 Guide Cover (For 12mm) 1
T6-3-10221 Guide Cover (For 9mm) 1
T6-3-10222 Guide Cover (For 15.5mm) 1
41 T6-3-11000 Accumulator Ass'y (For 12mm) 1 SEE PAGE 41
T6-3-11001 Accumulator Ass'y (For 9mm) 1
T6-3-11002 Accumulator Ass'y (For 15.5mm) 1

51 HBS0620 HBS, M6x20 4

HBS0620S HBS, M6x20 (Stainless Steel Model) 4
53 HBS0612 HBS, M6x12 (For 9mm) 2
HBS0616 HBS, M6x16 (For 12mm) 2
HBS0620 HBS, M6x20 (For 15.5mm) 2
54 PMS0315 PMS, M3x15 1
55 HN08 HN, M8 3
HN08S HN, M8 (Stainless Steel Model) 3
56 HN03 HN, M3 1
58 PW06A PW, M6 (A) 4
PW06AS PW, M6 (A)(Stainless Steel Model) 4
59 SW03 SW, M3 1

-40-
 01/18/08

3-1 ACCUMULATOR GROUP T6-3-10000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
60 SW08 SW, M8 1
61 SW06 SW, M6 4
SW06S SW, M6 (Stainless Steel Model) 4
62 T6-3-10321 Cover 1
63 PW05 PW, M5 2
64 SW05 SW, M5 2
65 HBS0510 HBS, M5x10 2

-40-1-
 01/18/08

3-1-1 ACCUMULATOR ASS'Y T6-3-11000

-41-
 01/18/08

3-1-1 ACCUMULATOR ASS'Y T6-3-11000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-3-11000 Accumulator Ass'y (For 12mm) 1
T6-3-11001 Accumulator Ass'y (For 9mm) 1
T6-3-11002 Accumulator Ass'y (For 15.5mm) 1
1 T6-3-11110 Accumulator Bearing Case 1
2 T6-3-11120 Accumulator Lower Shaft 1
3 T6-3-11130 Accumulator Lower Roller 1
4 T6-3-11140 Accumulator Main Roller & Shaft 1
5 T6-3-11150 Accumulator Balance Bar Holder 1
6 T6-3-11160 Accumulator Feed Shooter (For 12mm) 1
T6-3-11161 Accumulator Feed Shooter (For 9mm) 1
T6-3-11162 Accumulator Feed Shooter (For 15.5mm) 1
7 T6-3-11170 Accumulator Lower Shaft Spring Hook 1
8 T6-3-11180 Knob 1
9 T6-3-11190 Bearing Collar 2
10 T6-1-71160 Feed Roller Pulley 1
11 BR6202ZZ Bearing, 6202ZZ 4
12 BR6201ZZ Bearing, 6201ZZ 2
13 BR6902ZZ Bearing, 6902ZZ 2
14 RR35 Snap Ring, H-35 4
15 RR32 Snap Ring, H-32 2
16 RR28 Snap Ring, H-28 1
17 ER12 Snap Ring, E-12 3
18 SR12 Stop Ring, S-12 1

51 HBS0635H HBS, M6x35 (H) 1

52 HSS0615 HSS, M6x15 1
53 HSS0610 HSS, M6x10 2
54 HSS0506 HSS, M5x6 1
55 HN06 HN, M6 1

-42-
 01/18/08

3-2 ACCUMULATOR BOX GROUP T6-3-20000

-43-
 01/18/08

3-2 ACCUMULATOR BOX GROUP T6-3-20000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-3-20000 Accumulator Box Group (For 12mm) 1
T6-3-20003 Accumulator Box Group (For 9mm) 1
T6-3-20004 Accumulator Box Group (For 15.5mm) 1
2 T6-3-20120 Accumulator Box Front, RH 1
T6-3-20120S Accumulator Box Front, RH 1
(Stainless Steel Model)
3 T6-3-20130 Accumulator Box Front, LH 1
T6-3-20130S Accumulator Box Front, LH (Stainless 1
Steel Model)
4 T6-3-20140 Accumulator Box Rear 1
T6-3-20140S Accumulator Box Rear (Stainless Steel 1
Model)
5 T6-3-20150 Spacer 9 mm 3
T6-3-20160 Spacer 12 mm 3
T6-3-20170 Spacer 15.5 mm 3
41 T6-3-20510 Accumulator Box Front, RH Upper 1
(With Door)
T6-3-20510S Accumulator Box Front, RH Upper 1
(With Door)(Stainless Steel Model)
42 T6-3-20520 Magnet Catch 1
51 HBS0510 HBS, M5x10 4
HBS0510S HBS, M5x10 (Stainless Steel Model) 4
52 HBS0408 HBS, M4x8 7
HBS0408S HBS, M4x8 (Stainless Steel Model) 7
53 HBS0525H HBS, M5x25 (H) (For 9mm/12mm) 1
HBS0525HS HBS, M5x25 (H)(Stainless Steel Model) 1
(For 9mm/12mm)
HBS0530H HBS, M5x30 (H) (For 15.5mm) 1
HBS0530HS HBS, M5x30 (H)(Stainless Steel Model) 1
(For 15.5mm)
54 TMS0308 TMS, M3x8 2
55 PW05 PW, M5 7
PW05S PW, M5 (Stainless Steel Model) 7
56 PW04 PW, M4 9
PW04S PW, M4 (Stainless Steel Model) 9
57 HBS0430H HBS, M4x30 (H) 2
HBS0430HS HBS, M4x30 (H)(Stainless Steel Model) 2

-44-
 01/18/08

3-2 ACCUMULATOR BOX GROUP T6-3-20000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
58 SW04 SW, M4 7
SW04S SW, M4 (Stainless Steel Model) 7
59 SW05 SW, M5 4
SW05S SW, M5 (Stainless Steel Model) 4

-44-1-
 01/18/08

4 REEL UNIT T6-4-90000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-4-10000 Reel Guard Group 1 SEE PAGE 46
2 T6-4-20000 Reel Control Group 1 SEE PAGE 48
T6-4-20000S Reel Control Group (Stainless Steel Model) 1 SEE PAGE 48

-45-
 01/18/08

4-1 REEL GUARD GROUP T6-4-10000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
41 T6-4-11000 Free Angle Bracket Holder Ass'y 1 SEE PAGE 47

43 T6-4-10530 Reel Guard (Front) 1

T6-4-10530S Reel Guard (Front) (Stainless Steel Model) 1
44 T6-4-10540 Reel Guard (Rear) 1
T6-4-10540S Reel Guard (Rear) (Stainless Steel Model) 1

51 HBS1020 HBS, M10x20 4

HBS1020S HBS, M10x20 (Stainless Steel Model) 4
52 SW10 SW, M10 4
SW10S SW, M10 (Stainless Steel Model) 4

-46-
 01/18/08

4-1-1 FREE ANGLE BRACKET T6-4-11000

HOLDER ASS'Y

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-4-11110 Free Angle Bracket Holder 1
2 T6-4-11120 Free Angle Roller Bracket 1
3 T6-4-11130 Strap Guide Roller 1
4 T6-4-11140 Rivet, ∮6x30 2
5 PN06 PN, ∮6 2

51 HSS0610 HSS, M6x10 2

HSS0610S HSS, M6x10 (Stainless Steel Model) 2

-47-
 01/18/08

4-2 REEL CONTROL GROUP T6-4-20000

T6-4-20000S

-48-
 01/18/08

4-2 REEL CONTROL GROUP T6-4-20000

T6-4-20000S
REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-4-20000 Reel Control Group 1
T6-4-20000S Reel Control Group (Stainless Steel Model) 1
1 T6-4-20110 Reel Unit Base 1
3 T6-4-20130 Brake Tension Holder 1
4 T6-4-20140 Brake Belt Tightener 1
T6-4-20140S Brake Belt Tightener (Stainless Steel Model) 1
5 T6-4-20150 Reel Shaft 1
T6-4-20150S Reel Shaft (Stainless Steel Model) 1
6 T6-4-20160 Holder Shaft 2
T6-4-20160S Holder Shaft (Stainless Steel Model) 2
7 T6-4-20170 Reel Brake Arm 1
T6-4-20170S Reel Brake Arm (Stainless Steel Model) 1
8 T6-4-20180 Brake Tension Arm Spring 1
T6-4-20180S Brake Tension Arm Spring 1
(Stainless Steel Model)
9 T6-4-20190 Brake Tension Spring Ring 1
10 BR6205ZZ Bearing, 6205ZZ 2
11 MB1525 Metal Bush, 1525 2
13 ER19 Snap Ring, E-19 1
ER19S Snap Ring, E-19 (Stainless Steel Model) 1
14 ER12 Snap Ring, E-12 5
ER12S Snap Ring, E-12 (Stainless Steel Model) 5
15 SR08 Stop Ring, S-8 1
SR08S Stop Ring, S-8 (Stainless Steel Model) 1
16 T6-4-20260 Spring Hook 1
17 T6-4-20270 Set Block 1
T6-4-20270S Set Block (Stainless Steel Model) 1
18 T6-4-20280 Washer 1
T6-4-20280S Washer (Stainless Steel Model) 1
19 T6-4-20290 Collar 1
20 T6-4-20300 Collar 1
21 TC-013 Inner Flange 1
23 TC-014 Outer Flange 1
24 TC-015 Protector 1
25 TC-016 Reel Nut Handle 1
27 TC-020 Pin 1

-49-
 01/18/08

4-2 REEL CONTROL GROUP T6-4-20000

T6-4-20000S
REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
28 TC-021 Split Pin 1
30 TC-075 Center Drum 280mm (Option) 1

41 T6-4-21000 Brake Belt Ass'y 1 SEE PAGE 50

42 T6-4-22000 Free Slide Roller Ass'y 1 SEE PAGE 51

51 HBS0625 HBS, M6x25 1

HBS0625S HBS, M6x25 (Stainless Steel Model) 1
52 HBS0620 HBS, M6x20 2
HBS0620S HBS, M6x20 (Stainless Steel Model) 2
53 HBS0616 HBS, M6x16 2
HBS0616S HBS, M6x16 (Stainless Steel Model) 2
54 HN06 HN, M6 2
HN06S HN, M6 (Stainless Steel Model) 2
55 SW06 SW, M6 3
SW06S SW, M6 (Stainless Steel Model) 3
56 HSS0606 HSS, M6x6 1
57 HB0816 HB, M8x16 1
HB0816S HB, M8x16 (Stainless Steel Model) 1
58 LA-31010 Label 1
59 HBS0620 HBS, M6x20 1
60 PW06A PW, M6 (A) 3
PW06AS PW, M6 (A)(Stainless Steel Model) 3

-49-1-
 01/18/08

4-2-1 BRAKE BELT ASS'Y T6-4-21000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-4-21110 Brake Belt Holder 1
2 T6-4-21120 Brake Holder Plate 1
3 T6-4-21130 Brake V-Belt 1

51 PMS0420 PMS, M4x20 2

52 SW04 SW, M4 4
53 HN04 HN, M4 2

-50-
 01/18/08

4-2-2 FREE SLIDE ROLLER ASS'Y T6-4-22000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-4-22110 Free Slide Roller Bracket 1
T6-4-22110S Free Slide Roller Bracket (Stainless Steel Model) 1
2 TE-028 Roller 1
3 T6-4-11140 Rivet, ∮6x30 1
T6-4-11140S Rivet, ∮6x30 (Stainless Steel Model) 1
4 PN06 PN, ∮ 6 1
PN06S PN, ∮ 6 (Stainless Steel Model) 1

-51-
 01/18/08

5 BODY FRAME UNIT T6-5-90004

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-5-10014 Body Frame Group 1 SEE PAGE 53
T6-5-10014S Body Frame Group (Stainless Steel 1
Model)

-52-
 01/18/08

5-1 BODY FRAME GROUP T6-5-10014

-53-
 01/18/08

5-1 BODY FRAME GROUP T6-5-10014

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
2 T6-5-10047 Front Door (For Non CE Only) 1
T6-5-10047S Front Door (Stainless Steel Model) 1
(For Non CE Only)
T6-5-10127 Front Door (For Non CE Only, Outside 1
Tension)
T6-5-10127S Front Door (Stainless Steel Model) 1
(For Non CE Only, Outside Tension)
T6-5-10122 Front Door (For CE) 1
T6-5-10122S Front Door (Stainless Steel Model)(For CE) 1
T6-5-10128 Front Door (For CE, Outside Tension) 1
T6-5-10128S Front Door (Stainless Steel Model) 1
(For CE, Outside Tension)
3 T6-5-10130 Front Door Handle 1
T6-5-10130S Front Door Handle (Stainless Steel Model) 1
6 T6-5-10160 Magnet Catch 2
7 T6-5-40009 Enclosed Bottom Plate 1
T6-5-40009S Enclosed Bottom Plate (Stainless 1
Steel Model)
8 T6-5-40020 Power Switch Bracket (For CE) 1
9 T6-5-10190 Rear Plate 1
T6-5-10190S Rear Plate (Stainless Steel Model) 1
11 LA-10020 Control Label 1
LA-10021 Control Label (For CE) 1
12 T6-5-10220 Rear Cover 1
T6-5-10220S Rear Cover (Stainless Steel Model) 1
13 T6-5-10230 Caster (Free) 4
T6-5-10231 Caster (Free)(Option) 2
T6-5-10232 Caster (Free)(Stainless Steel Model) 2
14 T6-5-10244 Control Plate 1
T6-5-10244S Control Plate (Stainless Steel Model) 1
16 T6-5-10260 Cover 1
17 T6-5-10270 Caster (Brake)(Option) 2
T6-5-10271 Caster (Brake)(Stainless Steel Model) 2
41 T6-5-13000 Body Frame (For 850W) 1
T6-5-13000S Body Frame (Stainless Steel Model) 1
(For 850W)

-54-
 01/18/08

5-1 BODY FRAME GROUP T6-5-10014

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
42 T6-5-11000 Upper Table, Front Set (For 850W) 1 SEE PAGE 56
T6-5-11000S Upper Table, Front Set 1 SEE PAGE 56
(Stainless Steel Model)(For 850W)
T6-5-11009 Upper Table, Front Set (For 650W) 1
T6-5-11009S Upper Table, Front Set 1
(Stainless Steel Model)(For 650W)
43 T6-5-12000 Upper Table, Rear Set (For 850W) 1 SEE PAGE 57
T6-5-12000S Upper Table, Rear Set 1 SEE PAGE 57
(Stainless Steel Model)(For 850W)
T6-5-12009 Upper Table, Rear Set (For 650W) 1
T6-5-12009S Upper Table, Rear Set 1
(Stainless Steel Model)(For 650W)
44 T6-5-11002 Upper Table, Front Set (For 1050W) 1
T6-5-11003 Upper Table, Front Set (For 1250W) 1
T6-5-11004 Upper Table, Front Set (For 1450W) 1
T6-5-11005 Upper Table, Front Set (For 1650W) 1
T6-5-11006 Upper Table, Front Set (For 1850W) 1
T6-5-11007 Upper Table, Front Set (For 2050W) 1
T6-5-11008 Upper Table, Front Set (For 2250W) 1
45 T6-5-12006 Upper Table, Rear Set (For 1050W) 1
T6-5-12007 Upper Table, Rear Set (For 1250W) 1
T6-5-12008 Upper Table, Rear Set (For 1450W) 1
T6-5-12012 Upper Table, Rear Set (For 1650W) 1
T6-5-12013 Upper Table, Rear Set (For 1850W) 1
T6-5-12014 Upper Table, Rear Set (For 2050W) 1
T6-5-12015 Upper Table, Rear Set (For 2250W) 1
46 T6-5-10540 Upper Right Table, Front Set 1 SEE PAGE 58
(For 1050~2250W)
47 T6-5-10582 Upper Right Table, Rear Set 1 SEE PAGE 59
(For 1050W~2250W)
48 T6-5-10550 Upper Left Table, Front Set (For 1050W) 1 SEE PAGE 60
T6-5-10560 Upper Left Table, Front Set (For 1250W) 1
T6-5-10570 Upper Left Table, Front Set (For 1450W) 1
T6-5-10571 Upper Left Table, Front Set (For 1650W) 1
T6-5-10572 Upper Left Table, Front Set (For 1850W) 1
T6-5-10573 Upper Left Table, Front Set (For 2050W) 1
T6-5-10574 Upper Left Table, Front Set (For 2250W) 1

-55-
 01/18/08

5-1 BODY FRAME GROUP T6-5-10014

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
49 T6-5-10590 Upper Left Table, Rear Set (For 1050W) 1 SEE PAGE 61
T6-5-10600 Upper Left Table, Rear Set (For 1250W) 1
T6-5-10850 Upper Left Table, Rear Set (For 1450W) 1
T6-5-10851 Upper Left Table, Rear Set (For 1650W) 1
T6-5-10852 Upper Left Table, Rear Set (For 1850W) 1
T6-5-10853 Upper Left Table, Rear Set (For 2050W) 1
T6-5-10854 Upper Left Table, Rear Set (For 2250W) 1
52 TMS0615S TMS, M6x15 (SUS) 4
53 FMS0615S FMS, M6x15 (SUS)(For 1050~2250W) 4
54 TMS0308 TMS, M3x8 2
55 PW04 PW, M4 4
PW04S PW, M4 (Stainless Steel Model) 4
56 TMS0508 TMS, M5x8 15
TMS0508S TMS, M5x8 (Stainless Steel Model) 15
57 HB0616 HB, M6x16 16
HB0616S HB, M6x16 (Stainless Steel Model) 16
58 PW05 PW, M5 1
59 HN04 HN, M4 4
HN04S HN, M4 (Stainless Steel Model) 4
60 SW06 SW, M6 16
SW06S SW, M6 (Stainless Steel Model) 16
61 TMS0408 TMS, M4x8 6
TMS0408S TMS, M4x8 (Stainless Steel Model) 6
63 PW06C PW, M6 (C) 16
PW06CS PW, M6 (C)(Stainless Steel Model) 16
81 T6-5-10910 Bracket 1
82 TMS0512 TMS, M5x12 1
83 SW05 SW, M5 1
84 HN05 HN, M5 1
85 SW04 SW, M4 4
SW04S SW, M4 (Stainless Steel Model) 4

-55-1-
 01/18/08

5-1-1 UPPER TABLE, FRONT SET T6-5-11000

T6-5-11009

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-5-11000 Upper Table, Front Set (For 850W) 1
T6-5-11009 Upper Table, Front Set (For 650W) 1
1 T6-5-11110 Upper Table Front (For 850W) 1
T6-5-11110S Upper Table Front (Stainless Steel Model) 1
(For 850W)
T6-5-11010 Upper Table Front (For 650W) 1
T6-5-11010S Upper Table Front (Stainless Steel Model) 1
(For 650W)
2 T6-5-11120 Table Roller 4
T6-5-11121 Table Roller (Stainless Steel Model) 4
3 T6-5-11130 Table Roller Shaft 4
T6-5-11131 Table Roller Shaft (Stainless Steel Model) 4
4 ER07 Snap Ring, E-7 8
ER07S Snap Ring, E-7 (Stainless Steel Model) 8
5 T6-5-11150 Table Handle 2
T6-5-11150S Table Handle (Stainless Steel Model) 2
6 TMS0612 TMS, M6x12 4
TMS0612S TMS, M6x12 (Stainless Steel Model) 4
8 SW06 SW, M6 4
SW06S SW, M6 (Stainless Steel Model) 4

-56-
 01/18/08

5-1-2 UPPER TABLE, REAR SET T6-5-12000

T6-5-12009

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-5-12000 Upper Table, Rear Set (For 850W) 1
T6-5-12009 Upper Table, Rear Set (For 650W) 1
1 T6-5-12110 Upper Rear (For 850W) 1
T6-5-12110S Upper Rear (Stainless Steel Model) 1
(For 850W)
T6-5-12010 Upper Rear (For 650W) 1
T6-5-12010S Upper Rear (Stainless Steel Model) 1
(For 650W)
2 T6-5-11120 Table Roller 4
T6-5-11121 Table Roller (Stainless Steel Model) 4
3 T6-5-11130 Table Roller Shaft 4
T6-5-11131 Table Roller Shaft (Stainless Steel Model) 4
4 ER07 Snap Ring, E-7 8
ER07S Snap Ring, E-7 (Stainless Steel Model) 8
5 T6-5-11150 Table Handle 2
T6-5-11150S Table Handle (Stainless Steel Model) 2
6 TMS0612 TMS, M6x12 4
TMS0612S TMS, M6x12 (Stainless Steel Model) 4
8 SW06 SW, M6 4
SW06S SW, M6 (Stainless Steel Model) 4

-57-
 01/18/08

5-1-3 T6-5-10540

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-5-11020 Upper Right Table Front (For 1050~2250W) 1
T6-5-11020S Upper Right Table Front (Stainless Steel 1
Model)(For 1050~2250W)
2 T6-5-11120 Table Roller 4
T6-5-11121 Table Roller (Stainless Steel Model) 4
3 T6-5-11130 Table Roller Shaft 4
T6-5-11131 Table Roller Shaft (Stainless Steel Model) 4
4 ER07 Snap Ring, E-7 8
ER07S Snap Ring, E-7 (Stainless Steel Model) 8
5 T6-5-11150 Table Handle 1
T6-5-11150S Table Handle (Stainless Steel Model) 1
6 TMS0612 TMS, M6x12 2
TMS0612S TMS, M6x12 (Stainless Steel Model) 2

8 SW06 SW, M6 2
SW06S SW, M6 (Stainless Steel Model) 2

-58-
 01/18/08

5-1-4 T6-5-10582

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-5-12022 Upper Right Rear (For 1050~2250W) 1
T6-5-12022S Upper Right Rear (Stainless Steel Model) 1
(For 1050~2250W)
2 T6-5-11120 Table Roller 4
T6-5-11121 Table Roller (Stainless Steel Model) 4
3 T6-5-11130 Table Roller Shaft 4
T6-5-11131 Table Roller Shaft (Stainless Steel Model) 4
4 ER07 Snap Ring, E-7 8
ER07S Snap Ring, E-7 (Stainless Steel Model) 8
5 T6-5-11150 Table Handle 1
T6-5-11150S Table Handle (Stainless Steel Model) 1
6 TMS0612 TMS, M6x12 2
TMS0612S TMS, M6x12 (Stainless Steel Model) 2

8 SW06 SW, M6 2
SW06S SW, M6 (Stainless Steel Model) 2

-59-
 01/18/08

5-1-5 T6-5-10550

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-5-10550 Upper Left Table, Front Set (For 1050W) 1
T6-5-10560 Upper Left Table, Front Set (For 1250W) 1
T6-5-10570 Upper Left Table, Front Set (For 1450W) 1
T6-5-10571 Upper Left Table, Front Set (For 1650W) 1
T6-5-10572 Upper Left Table, Front Set (For 1850W) 1
T6-5-10573 Upper Left Table, Front Set (For 2050W) 1
T6-5-10574 Upper Left Table, Front Set (For 2250W) 1
1 T6-5-11030 Upper Left Table Front (For 1050W) 1
T6-5-11030S Upper Left Table Front (Stainless Steel 1
Model)(For 1050W)
T6-5-11040 Upper Left Table Front (For 1250W) 1
T6-5-11040S Upper Left Table Front (Stainless Steel 1
Model)(For 1250W)
T6-5-11050 Upper Left Table Front (For 1450W) 1
T6-5-11050S Upper Left Table Front (Stainless Steel 1
Model)(For 1450W)
T6-5-11060 Upper Left Table Front (For 1650W) 1
T6-5-11060S Upper Left Table Front (Stainless Steel 1
Model)(For 1650W)
T6-5-11070 Upper Left Table Front (For 1850W) 1
T6-5-11070S Upper Left Table Front (Stainless Steel 1
Model)(For 1850W)

- 60 -
 01/18/08

5-1-5 UPPER LEFT TABLE, FRONT SET T6-5-10550

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-5-11080 Upper Left Table Front (For 2050W) 1
T6-5-11080S Upper Left Table Front (Stainless Steel 1
Model)(For 2050W)
T6-5-11090 Upper Left Table Front (For 2250W) 1
T6-5-11090S Upper Left Table Front (Stainless Steel 1
Model)(For 2250W)
2 T6-5-11120 Table Roller (For 1050W~1450W) 2
Table Roller (For 1650W/1850W) 4
Table Roller (For 2050W/2250W) 6
T6-5-11121 Table Roller (Stainless Steel Model) 2
(For 1050W~1450W)
Table Roller (Stainless Steel Model) 4
(For 1650W/1850W)
Table Roller (Stainless Steel Model) 6
(For 2050W/2250W)
3 T6-5-11130 Table Roller Shaft (For 1050W~1450W) 2
Table Roller Shaft (For 1650W/1850W) 4
Table Roller Shaft (For 2050W/2250W) 6
T6-5-11131 Table Roller Shaft (Stainless Steel 2
Model)(For 1050W~1450W)
Table Roller Shaft (Stainless Steel 4
Model)(For 1650W/1850W)
Table Roller Shaft (Stainless Steel 6
Model)(For 2050W/2250W)
4 ER07 Snap Ring, E-7 (For 1050W~1450W) 4
Snap Ring, E-7 (For 1650W/1850W) 8
Snap Ring, E-7 (For 2050W/2250W) 12
ER07S Snap Ring, E-7 (Stainless Steel 4
Model)(For 1050W~1450W)
Snap Ring, E-7 (Stainless Steel Model) 8
(For 1650W/1850W)
Snap Ring, E-7 (Stainless Steel Model) 12
(For 2050W/2250W)
5 T6-5-11150 Table Handle 1
T6-5-11150S Table Handle (Stainless Steel Model) 1

-60-1-
 01/18/08

5-1-5 UPPER LEFT TABLE, FRONT SET T6-5-10550

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
6 TMS0612 TMS, M6x12 2
TMS0612S TMS, M6x12 (Stainless Steel Model) 2
8 SW06 SW, M6 2
SW06S SW, M6 (Stainless Steel Model) 2

-60-2-
 01/18/08

5-1-6 UPPER LEFT TABLE, REAR SET T6-5-10590

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-5-10590 Upper Left Table, Rear Set (For 1050W) 1
T6-5-10600 Upper Left Table, Rear Set (For 1250W) 1
T6-5-10850 Upper Left Table, Rear Set (For 1450W) 1
T6-5-10851 Upper Left Table, Rear Set (For 1650W) 1
T6-5-10852 Upper Left Table, Rear Set (For 1850W) 1
T6-5-10853 Upper Left Table, Rear Set (For 2050W) 1
T6-5-10854 Upper Left Table, Rear Set (For 2250W) 1
1 T6-5-12030 Upper Left Table Rear (For 1050W) 1
T6-5-12030S Upper Left Table Rear (Stainless Steel 1
Model)(For 1050W)
T6-5-12040 Upper Left Table Rear (For 1250W) 1
T6-5-12040S Upper Left Table Rear (Stainless Steel 1
Model)(For 1250W)
T6-5-12050 Upper Left Table Rear (For 1450W) 1
T6-5-12050S Upper Left Table Rear (Stainless Steel 1
Model)(For 1450W)
T6-5-12060 Upper Left Table Rear (For 1650W) 1
T6-5-12060S Upper Left Table Rear (Stainless Steel 1
Model)(For 1650W)
T6-5-12070 Upper Left Table Rear (For 1850W) 1
T6-5-12070S Upper Left Table Rear (Stainless Steel 1
Model)(For 1850W)

- 61 -
 01/18/08

5-1-6 UPPER LEFT TABLE, REAR SET T6-5-10590

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-5-12080 Upper Left Table Rear (For 2050W) 1
T6-5-12080S Upper Left Table Rear (Stainless Steel 1
Model)(For 2050W)
T6-5-12090 Upper Left Table Rear (For 2250W) 1
T6-5-12090S Upper Left Table Rear (Stainless Steel 1
Model)(For 2250W)
2 T6-5-11120 Table Roller (For 1050W~1450W) 2
Table Roller (For 1650W/1850W) 4
Table Roller (For 2050W/2250W) 6
T6-5-11121 Table Roller (Stainless Steel Model) 2
(For 1050W~1450W)
Table Roller (Stainless Steel Model) 4
(For 1650W/1850W)
Table Roller (Stainless Steel Model) 6
(For 2050W/2250W)
3 T6-5-11130 Table Roller Shaft (For 1050W~1450W) 2
Table Roller Shaft (For 1650W/1850W) 4
Table Roller Shaft (For 2050W/2250W) 6
T6-5-11131 Table Roller Shaft (Stainless Steel Model) 2
(For 1050W~1450W)
Table Roller Shaft (Stainless Steel Model) 4
(For 1650W/1850W)
Table Roller Shaft (Stainless Steel Model) 6
(For 2050W/2250W)
4 ER07 Snap Ring, E-7 (For 1050W~1450W) 4
Snap Ring, E-7 (For 1650W/1850W) 8
Snap Ring, E-7 (For 2050W/2250W) 12
ER07S Snap Ring, E-7 (Stainless Steel Model) 4
(For 1050W~1450W)
Snap Ring, E-7 (Stainless Steel Model) 8
(For 1650W/1850W)
Snap Ring, E-7 (Stainless Steel Model) 12
(For 2050W/2250W)
5 T6-5-11150 Table Handle 1
T6-5-11150S Table Handle (Stainless Steel Model) 1

-61-1-
 01/18/08

5-1-6 UPPER LEFT TABLE, REAR SET T6-5-10590

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
6 TMS0612 TMS, M6x12 2
TMS0612S TMS, M6x12 (Stainless Steel Model) 2

8 SW06 SW, M6 2
SW06S SW, M6 (Stainless Steel Model) 2

-61-2-
 01/18/08

6 ELECTRIC CONTROL UNIT T6-6-90000

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
1 T6-6-10030 Electric Control Group (For 220V/1PH) 1 SEE PAGE 63
T6-6-10008 Electric Control Group (For 100V/1PH) 1
T6-6-10009 Electric Control Group (For 110V/1PH) 1
T6-6-10019 Electric Control Group (For 240V/1PH) 1
T6-6-10026 Electric Control Group (For 220V/3PH) 1
T6-6-10027 Electric Control Group (For 380V/3PH) 1
T6-6-10028 Electric Control Group (For 415V/3PH) 1

2 T6-6-30024 Electric Box Group (For TP-6000-1) 1 SEE PAGE 66

T6-6-40027 Electric Box Group (For TP-6000CE1) 1
T6-6-50001 Electric Box Group (For TP-6000-3) 1
T6-6-50002 Electric Box Group (For TP-6000CE3) 1

-62-
 01/18/08

6-1 ELECTRIC CONTROL GROUP T6-6-10030

-63-
 01/18/08

6-1 ELECTRIC CONTROL GROUP T6-6-10030

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-6-10030 Electric Control Group (For 220V/1PH) 1
T6-6-10008 Electric Control Group (For 100V/1PH) 1
T6-6-10009 Electric Control Group (For 110V/1PH) 1
T6-6-10019 Electric Control Group (For 240V/1PH) 1
T6-6-10026 Electric Control Group (For 220V/3PH) 1
T6-6-10027 Electric Control Group (For 380V/3PH) 1
T6-6-10028 Electric Control Group (For 415V/3PH) 1
1 T6-6-10110 Motor (M1) Pulley (For 3PH) 1
T6-6-30002 Motor (M1) Pulley (For 1PH) 1
2 TG-013 Fuse Holder (For CE) 1
3 T6-6-10130 Motor (M2) Pulley (For 3PH) 1
T6-6-30005 Motor (M2) Pulley (For 1PH) 1
4 T6-6-10140 Heater Terminal Bracket 1
5 TF-025 Knob 1
6 T6-6-10163 Cap Tire (For 3PH) 1
T6-6-10161 Cap Tire (Europe Plug)(For 1PH) 1
T6-6-10162 Cap Tire (America Plug)(For 1PH) 1
7 T6-6-40007 Fuse 15A (For CE) 1
9 T6-6-10190 Limit Switch Ball 1
10 T6-6-10200 Limit Switch Base 1
11 T6-6-10210 Limit Switch Fixing Plate 1
12 T6-6-10220 Limit Switch Cover 1
13 T6-6-10230 ML, Limit Switch 1
14 T6-1-71160 Feed Roller Pulley 1
15 T6-6-40002 Transformer Box Cover 1
T6-6-40002S Transformer Box Cover (Stainless 1
Steel Model)
16 T6-6-10260 Smoke Fan Bracket 1
17 T6-6-30011 Power Selector Switch 1
T6-6-40018 Power Light (For TP-6000CE) 1
T6-6-10301 Start Switch With Lamp (Option) 1
18 T6-6-30010 Auto-return Selector Switch 1
19 T6-6-30009 Stop Switch 1NC 1
T6-6-40016 2P. Selector Switch 1
20 T6-6-30008 Mushroom Head Switch (Start) 1
T6-6-40015 Push Button Switch (Start, Reset) 1
T6-6-10301 Start Switch With Lamp (Option) 1

-64-
 01/18/08

6-1 ELECTRIC CONTROL GROUP T6-6-10030

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
21 T6-6-40006 Transformer Box 1
T6-6-40006S Transformer Box (Stainless Steel Model) 1
22 T6-6-10320 Heater Terminal 1

24 T6-6-10340 Cable Gland (PG13.5) 1

25 T6-6-10350 Foot Switch Consent 1
26 T6-6-10360 Limit Switch (LS1-3) 3
27 T6-6-10370 Limit Switch Cover (LS1-3) 3
28 T6-6-10380 Limit Switch (LS4) 1

30 TF-027 Selector Switch 1

31 TF-021 Fan (For 110V) 1
TF-021-1 Fan (For 220V/230V/240V) 1
32 T6-6-10420 Foot Selector Switch 1
33 T6-6-30060 Motor (M1) (For 220V/1PH) 1
T6-6-30050 Motor (M1) (For 100V/1PH) 1
T6-6-30051 Motor (M1) (For 110V/1PH) 1
T6-6-30052 Motor (M1) (For 240V/1PH) 1
T6-6-10442 Motor (M1) (For 220V/3PH) 1
T6-6-10444 Motor (M1) (For 380V/3PH) 1
T6-6-10441 Motor (M1) (For 415V/3PH) 1

35 T6-6-30070 Motor (M2) (For 220V/1PH) 1

T6-6-30053 Motor (M2) (For 100V/1PH) 1
T6-6-30054 Motor (M2) (For 110V/1PH) 1
T6-6-30055 Motor (M2) (For 240V/1PH) 1
T6-6-10442 Motor (M2) (For 220V/3PH) 1
T6-6-10444 Motor (M2) (For 380V/3PH) 1
T6-6-10441 Motor (M2) (For 415V/3PH) 1
36 T6-6-10460 Snap Switch (For Non CE Only) 1
37 T6-6-40023 Switch Connector (For CE) 1
38 T6-6-40010 Main Power Switch (For CE) 1

-65-
 01/18/08

6-1 ELECTRIC CONTROL GROUP T6-6-10030

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
39 T6-6-30080 Motor (M3) (For 220V/1PH) 1
T6-6-30056 Motor (M3) (For 100V/1PH) 1
T6-6-30057 Motor (M3) (For 110V/1PH) 1
T6-6-30058 Motor (M3) (For 240V/1PH) 1
T6-6-10442 Motor (M3) (For 220V/3PH) 1
T6-6-10444 Motor (M3) (For 380V/3PH) 1
T6-6-10445 Motor (M3) (For 415V/3PH) 1
40 T6-6-30200 Earth Plate (3P) (For CE) 1
41 T5-4-10310 Earth Plate (5P) (For CE) 1
42 TF-024 Transformer Cover 1
43 T6-6-10530 Counter (Option) 1
44 T6-6-10540 Bracket (For M2 Fan, 1PH) 1
45 T6-6-10550 Fan (For M1/M2 Motor, 110V/1PH) 2
T6-6-10551 Fan (For M1/M2 Motor, 230V/1PH) 2
46 T6-6-10560 Bracket (For M1 Fan, 1PH) 1
47 T6-6-10421 Foot Selector Switch (Option) 1
48 T7-5-20180 Power Cord 1
49 T7-5-20130 Micro Switch (Option) 1
50 T7-6-40001 Pedal Control Set (Option) 1
51 T6-6-11000 Pedal Control Set 1
53 HBS0510 HBS, M5x10 4
54 HBS0512 HBS, M5x12 (For CE) 1
55 PMS0410 PMS, M4x10 2
56 HSS0610 HSS, M6x10 4
57 FMS0435S FMS, M4x35 (SUS) 2
58 HBS0620 HBS, M6x20 10
HBS0625 HBS, M6x25 2
59 TMS0308 TMS, M3x8 4
60 TMS0508 TMS, M5x8 6
61 TMS0408 TMS, M4x8 9
62 TMS0408 TMS, M4x8 4
TMS0408S TMS, M4x8 (Stainless Steel Model) 4
64 PMS0425 PMS, M4x25 6
65 PMS0315 PMS, M3x15 2
66 HN06 HN, M6 12
67 HN04 HN, M4 8
68 HN03 HN, M3 2

-65-1-
 01/18/08

6-1 ELECTRIC CONTROL GROUP T6-6-10030

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
69 PW06D PW, M6 (D)(For 1PH) 2
70 PW06C PW, M6 (C)(For 1PH) 22
PW, M6 (C)(For 3PH) 24
71 TF-006 Micro Switch (Option) 1
72 PW05 PW, M5 4
73 PW04 PW, M4 14
74 SW05 SW, M5 3
75 SW06 SW, M6 12
77 T6-6-10172 Heater Transformer Ass'y (For 110V) 1
T6-6-10171 Heater Transformer Ass'y (For 220V/ 1
230V/240V)
T6-6-10173 Heater Transformer Ass'y (For 100V) 1
78 SW03 SW, M3 2
79 T6-6-10892 Motor starting capacitor (For M1, 1
100V/1PH)
T6-6-10895 Motor starting capacitor (For M1/M2, 2
220V/1PH)
T6-6-10893 Motor starting capacitor (For M1/M2, 2
110V/1PH)
T6-6-10894 Motor starting capacitor (For M1/M2, 2
240V/1PH)
80 T6-6-10902 Motor starting capacitor (For M2, 1
100V/1PH)

81 T6-6-10915 Motor starting capacitor (For M3, 1

220V/1PH)
T6-6-10912 Motor starting capacitor (For M3, 1
100V~110V/1PH)

T6-6-10914 Motor starting capacitor (For M3, 1

240V/1PH)
82 T6-6-10920 Active Carbon Filter (Option) 1
83 T6-6-10930 Nipple (Option) 1
84 T6-6-10940 Smoke-Exhaustion Pipe (Option) 1
85 T6-6-10950 Reset Switch (For S.F.S) 1
86 T6-6-10960 Relay (For S.F.S) 1
87 T6-6-10970 Fan (For Smoke)(Option) 1

-65-2-
 01/18/08

6-1 ELECTRIC CONTROL GROUP T6-6-10030

REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
88 T6-6-10980 Cable Gland (PG11) 3
89 T6-6-30135 Lamp 1
91 FTP0416A FTP, 4x16 (A) 1

-65-3-
 01/18/08

6-2 ELECTRIC CONTROL GROUP T6-6-30024

T6-6-40027

TP-6000-1/TP-6000CE1

-66-
 01/18/08

6-2 ELECTRIC CONTROL GROUP T6-6-30024

T6-6-40027
REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-6-30024 Electric Control Group (For 1PH, Non CE) 1
T6-6-40027 Electric Control Group (For 1PH, CE) 1
13 T6-6-30013 Connector (LS1.2.3.) 1
14 T6-6-30014 Connector (Switch 2) 1
15 T6-6-30015 Connector (Switch 1) 1
16 T6-6-30016 Connector (LS4/Foot) 1
17 T6-6-30017 Connector (Braker) 1
18 T6-6-30018 Connector (Heater) 1
19 T6-6-30019 Connector (M1) 1
20 T6-6-30020 Connector (M2) 1
21 T6-6-30021 Connector (M3) 1
22 T6-6-30022 Connector (Power) 1
23 T5-4-10160 Fuse Holder 6
24 T6-6-30137 Electric Control Unit (For Non CE) 1
T6-6-40053 Electric Control Unit (For CE) 1
29 T6-6-30029 Knob 2
30 T5-4-10310 Earth Plate (5P) (For CE) 1
31 T6-6-30031 Fuse (2A)(For 220V/230V/240V) 1
32 T6-6-30032 Fuse (3A)(For 220V/230V/240V) 1
T6-6-30134 Fuse (6A)(For 110V) 1
33 T6-6-30033 Fuse (5A)(For 220V/230V/240V) 2
T6-6-30133 Fuse (10A)(For 110V) 2
34 T6-6-30034 Fuse (7A)(For 220V/230V/240V) 1
T6-6-30133 Fuse (10A)(For 110V) 1
36 T6-6-30036 Fuse (1A) 1
37 LA-20070 Label 1
38 T6-6-30038 Electric Box 1
39 T6-6-30039 Cushion 4
40 T6-6-30040 P.C. Board 1
41 T6-6-30041 Transformer 1
42 T6-6-30042 Relay Socket (For Non CE ) 1
43 T6-6-30043 Relay (For Non CE ) 1
44 T6-6-30044 Cover 1
45 PMS0306 PMS, M3x6 8

-67-
 01/18/08

6-2 ELECTRIC CONTROL GROUP T6-6-30024

T6-6-40027
REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
46 TMS0508 TMS, M5x8 4
47 T6-6-30047 EMI Filter 1
49 T6-6-30049 Variable Resistor (1M) 2
51 TMS0412 TMS, M4x12 (For CE) 1
52 SW04 SW, M4 (For CE) 1
53 HN04 HN, M4 (For CE) 1

-67-1-
 01/18/08

6-2 ELECTRIC CONTROL GROUP T6-6-50001

T6-6-50002

TP-6000-3/TP-6000CE3

-68-
 01/18/08

6-2 ELECTRIC CONTROL GROUP T6-6-50001

T6-6-50002
REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
T6-6-50001 Electric Control Group (For 3PH, Non CE) 1
T6-6-50002 Electric Control Group (For 3PH, CE) 1
1 T6-6-50110 Electric Box 1
3 T6-6-50130 Panel 1
4 T6-6-50140 Terminal (Ground) 5
5 T6-6-50150 Terminal (Control)(Single in, single out) 22
6 T6-6-50160 Magnetic Switch 4
7 T6-6-50170 Transformer (For 220V, 380V, 415V/24V) 1
8 T6-6-50180 Fuse Holder 5
Brake Fuse Holder (For CE ) 1
9 T6-6-50190 Relay 2
10 T6-6-50200 Relay Socket 2
11 T6-6-50210 Timer 2
12 T6-6-50220 Magnetic Switch (For Non CE only) 1
13 T6-6-50230 Wire Duct 25x45 1set
14 T6-6-50240 ADD-ON Contact (M2F) (2a) 1
15 T6-6-50250 Rectifier 1
16 T6-6-50260 Over Load Relay 3
17 T6-6-50270 Terminal Guide 1
18 T6-6-50280 Fuse (5A) 3
19 T6-6-50290 Fuse (2A) 2
20 T6-6-50300 End Stop 2
21 T6-6-50310 Terminal (Control)(Two in, two out) 2
22 T6-6-50320 Group Marker Carrier 4
23 T6-6-50330 End Plate (Fuse) 1
24 T6-6-50340 ADD-ON Contact (M2R) (1a1b) 1
25 T6-6-50350 Cover 1
26 T6-6-10250 Earth Plate (6P) (For CE) 1

50 TMS0512 TMS, M5x12 (For CE) 1

51 HBS0616 HBS, M6x16 4
52 SW05 SW, M5 3
53 HBS0510 HBS, M5x10 3
54 PW05 PW, M5 3

-69-
 01/18/08

6-2 ELECTRIC CONTROL GROUP T6-6-50001

T6-6-50002
REF.
PART NO. DESCRIPTION Q'TY REMARKS
NO.
55 TMS0508 TMS, M5x8 5
56 T5-2-10500 Cable Gland (PG9) 7
57 T6-6-10980 Cable Gland (PG11) 3
58 T6-6-10340 Cable Gland (PG13.5) 1
59 SW06 SW, M6 4
60 HN06 HN, M6 4
61 T6-6-50410 End Plate (Control) 1

01/2008

-69-1-