Scribd
Upload
149 views10 pages

Temperature Controller E5Cwt: Ordering Information

This document provides information about the E5CWT Temperature Controller. It is a DIN-sized controller featuring PID tuning, simultaneous PV and SV displays, and non-volatile memory. It can operate with thermocouple or PT100 sensors over user-selectable temperature ranges. Settings are tamper-proof and it provides sensor compensation and diagnostics. Ordering information includes specifications for supply voltage, power consumption, control modes, alarm outputs, and environmental tolerances. Wiring diagrams and setting procedures are also described.

Uploaded by

Waheed Mido
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
149 views10 pages

Temperature Controller E5Cwt: Ordering Information

This document provides information about the E5CWT Temperature Controller. It is a DIN-sized controller featuring PID tuning, simultaneous PV and SV displays, and non-volatile memory. It can operate with thermocouple or PT100 sensors over user-selectable temperature ranges. Settings are tamper-proof and it provides sensor compensation and diagnostics. Ordering information includes specifications for supply voltage, power consumption, control modes, alarm outputs, and environmental tolerances. Wiring diagrams and setting procedures are also described.

Uploaded by

Waheed Mido
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

E5CWT E5CWT

Temperature Controller E5CWT

DIN-sized (48x48mm) Temperature


Controller Featuring automatic PID
Tuning Function
■ Simultaneous PV and SV displays.
■ Field-selectable temperature ranges
■ Tamper-proof settings, sensor compensation, and
controller diagnostics.
■ Non-volatile memory.
■ Selectable operation mode (ON/OFF or PID).

Ordering Information
E5CWT E5CWT

■ Ratings
Supply voltage 110/220 VAC,50/60Hz
Operating voltage range 85% to 110% of rated supply voltage
Power consumption 110/220 VAC:Approx,8VA(2 alarm)
:Approx,7VA(1 alarm)
Input Thermocouple(K/J) or platinum resistance thermometer(Pt100)
Control output Contact output:SPST-NO;3 A at 250 VAC (resistive load)
Voltage output(for SSR):20 mA at 12 VDC(with short-circuit protection
Control mode ON/OFF or PID control with auto-tuning
Alarm output Relay output: independent SPST-NO contacts;1 A at 250 VAC(resistive load)
Setting method Digital setting via Up and Down Keys
Display method Digital (PV color-red, SV color-green)

■ Characteristics
Setting and display ±0.5% full scale ±1 digit max.(The setting and display temperatures coincide
because there is no relative error between them.)
Hysteresis 0.2% of full scale (during ON/OFF operation)
Proportional band 0% to 99%
Integral time(Reset time) 0 to 99 minutes
Derivative time(Rate time) 0 to 9.9 minutes
Anti-reset windup(ARW) 0% to 99%
Alarm output setting range 0 to full-scale for all alarm modes except the absolute-value alarm mode
Proportional period 2s/20s (switch-selectable)
Sampling period 500ms(Output change period: 2s, Indication change period: 2s)
Insulation resistance 20MΩ min.(at 500 VDC)
Dielectric strength 2,000 VDC, 50/60 Hz for 1 minute between current-carrying terminals of different
polarity
Vibration Malfunction durability: 2 to 55 Hz,2G 10 minutes each in X,Y, and Z directions
Mechanical durability: 10 to 55 Hz,0.75 mm double 2hrs each in X,Y, and Z
directions
Shock Malfunction durability: 100m/s2 3 times each in 6 directions
Mechanical durability: 300m/s2 3 times each in 6 directions
Life expectancy Mechanical:10,000,000 operations min.(Contact Output Types)
Electrical:100,000 operations min.( Contact Output Types)
Ambient operating temperature -10。 To 55 (with no icing)
。
Ambient storage temperature -25 To 65 (with no icing)
Ambient humidity 35% to 85%(with no condensation)
Enclosure rating Front Panel: IEC lP50
Rear Panel : IEC IP20
Terminals : IEC IP00
E5CWT E5CWT
E5CWT E5CWT

Installation
■Wiring
The voltage output(20mA,12VDC)is not electrically insulated from internal circuits.

1 Alarm Type

2 Alarm Type

Note: The voltage output(20mA at 12VDC)is not insulated from the internal circuitry. When using a
thermocouple temperature sensor that incorporates a ground terminal, do not connect terminal
7 or 8 to the ground terminal or accurate temperature control will not be possible due to the
short-circuited current that will flow between the ground terminal and terminal 7 or 8.
E5CWT E5CWT
E5CWT E5CWT

■ Setting Procedure ■Function Selector


Set the temperature range by setting the The DIP switch is used to set the operating
temperature range selector to the desired number. parameters listed in the following table. All pins
Each temperature display range is ±10% the full are factory-set to OFF.
scale of the temperature of the temperature range.
E5CWT E5CWT

■ Alarm 1 Mode Selector


Alarm modes, listed in the following table, can be
selected using the alarm mode selector.▲indicates
set value for alarm output(following table)

■Alarm 2 Mode Selector


E5CWT E5CWT

■ Setting Procedure: 1 alarm Type


E5CWT E5CWT
E5CWT E5CWT

OMRON ELECTRONICS PTY. LTD


Australia : Phone 02-9878-6377 Fax. 02-9878-6981

OMRON ELECTRONICS LIMITED


New Zealand : Phone 64-9-358-4400 Fax. 64-9-358-4411

You might also like