Scribd
Upload
128 views2 pages

Job No.: Design By:: Spreadsheet of

This document provides a summary of the design of reinforced concrete corbels for the XYZ Building project. It includes calculations to check the adequacy of 5 corbel sections under applied loads based on limit state design methods according to IS:456-2000. It evaluates parameters like concrete grade, steel yield strength, reinforcement size and spacing. All corbel sections were found to be adequate based on checks for bending capacity, shear stress, development length of tension reinforcement and bearing stress at reinforcement bends.

Uploaded by

dhamodharan24
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
128 views2 pages

Job No.: Design By:: Spreadsheet of

This document provides a summary of the design of reinforced concrete corbels for the XYZ Building project. It includes calculations to check the adequacy of 5 corbel sections under applied loads based on limit state design methods according to IS:456-2000. It evaluates parameters like concrete grade, steel yield strength, reinforcement size and spacing. All corbel sections were found to be adequate based on checks for bending capacity, shear stress, development length of tension reinforcement and bearing stress at reinforcement bends.

Uploaded by

dhamodharan24
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Company's Name: ABC Consultants Job No.

: ABC/1001
101, Known Street, Known Area, Known City, Pin …. Design by: UVW
Client: Very Important Industries Ltd, Well Known City Date: 22-Nov-21
Project: XYZ Building Page No. CRBL/101
RCDesignCD

SPREADSHEET OF R.C. CORBEL DESIGN


BY LIMIT STATE METHOD AS PER IS:456-2000

Checks the adequacy of Corbel section for the applied loads, with the given concrete grade and type of Steel.





2
Concrete Grade = M 3 τc-max= 3.1 N/mm
Yield Strength of Main Steel, fy = 3 N/mm2
Clear cover to Main Reinforcement = 25 mm

Corbel Corbel dimensions (mm) av Ultimate applied loads Ft (kN)


Mk. h hy Breadth = b w (mm) Fv (kN) Fh (kN) =FcCosθ +Fh
CRBL-1 600 300 400 300 250 460 0 270.26
CRBL-2 430 250 300 350 250 200 0 153.56
CRBL-3 550 300 400 400 300 350 27 276.76
CRBL-4 250 150 400 200 150 150 0 126.35
CRBL-5 450 300 350 300 225 215 52.5 192.24

Corbel Min.AstProvide Main ReinforcementEff 'd' θ Xu/d Fc Fc Sinθ Design


Mk. (mm2) Nos. Dia (mm) Ast(mm2) (mm) (deg) (Max =0.4792) (kN) to be >Fv Status
CRBL-1 748.5 5 16 1005.31 567 59.955 0.4754 539.79 467.26 Section O.K.
CRBL-2 425.3 4 16 804.25 397 52.643 0.3502 253.06 201.15 Section O.K.
CRBL-3 766.5 6 16 1206.37 517 54.69 0.3615 432.11 352.62 Section O.K.
CRBL-4 349.9 4 16 804.25 217 50.002 0.3523 196.57 150.58 Section O.K.
CRBL-5 532.4 3 16 603.19 417 57.191 0.3261 257.89 216.75 Section O.K.
Company's Name: ABC Consultants Job No.: ABC/1001
101, Known Street, Known Area, Known City, Pin …. Design by: UVW
Client: Very Important Industries Ltd, Well Known City Date: 22-Nov-21
Project: XYZ Building Page No. CRBL/102

Check on Shear
Corbel Shear Stress Permissible Shear Horizontal Links
100 Ast/bd Design Status
Mk. τv (N/mm2) Stress τc (N/mm2) Dia(mm) Legs Nos.
CRBL-1 2.0282 0.4433 2.1103 Section O.K. 10 2 4
CRBL-2 1.6793 0.6753 1.7519 Section O.K. 10 2 3
CRBL-3 1.6925 0.5834 1.7936 Section O.K. 12 2 3
CRBL-4 1.7281 0.9266 1.8034 Section O.K. 10 2 3
CRBL-5 1.4731 0.4133 1.6750 Section O.K. 10 2 2

Anchorage of Tension Reinforcement

Ld = O s (Ref: Cl.26.2.1 of IS:456-2000)


4 bd
Bar dia. O
s' = Ld - Y x s (As horizontal links are provided,
s Tension Ld 2 s /2 is considered)
Ld

r s' Bearing Stress in Concrete at inner bend of bar


Y
(Ref: Cl.26.2.2.5 of IS:456-2000)
1 1 F
D Bearing Stress = bt
Where,
Cover rO Ld = Development Length of bar
Edge of Bearing Stress shall not exceed: O = Dia. of bar
ab Section s = Stress in bar at the face of section
1.5 fck
By Limit-State Method = s' = Stress in bar at the start of bend
ab { 1 + 2aO
b
} a b = Distance between bars as shown
r = Internal radius of bend
bd = Design Bond Stress
Section 1-1 D = Depth of the Section
 ' x  x O2
Bearing Stress in Concrete at F = s
inner bend of L-shaped bar bt 4

Calculations for Radius 'r' at bend of Tension Reinforcement


(Minimum r = 2xФ for MS bars & 4xΦ for HYSD bars) Permissible Bond Stress, τbd = 2.24 N/mm2
Corbel D Cover Rad r ab σs at face Dim Y σ's at bend Ld Bearing stress (N/mm2)
Mk. (mm) (mm) (mm) (mm) (N/mm2) (mm) (N/mm2) (mm) Actual Permissible
CRBL-1 500 40 64 66.7 268.831 380 28.016 480 5.501 25.338
CRBL-2 400 40 64 60 190.930 280 17.065 341 3.351 24.457
CRBL-3 500 50 64 57.1 229.414 370 11.107 410 2.181 24.038
CRBL-4 200 25 64 80 157.102 95 51.951 281 10.201 26.786
CRBL-5 300 25 64 87.5 318.704 195 104.752 569 20.568 27.458
RCDesignCD

You might also like