ADVANCED Motion Controls Releases 60A Continuous Micro-Sized FlexPro Servo Drives

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

Phone: 877-737-8698 • Fax: 877-737-8699

[email protected] • www.electromate.com

— FOR IMMEDIATE RELEASE —

ADVANCED Motion Controls Releases 60Amp Micro-Sized FlexPro Servo Drives


ADVANCED Motion Controls has released 7 new micro-sized FlexPro servo drives rated to output 60A
continuous. The 60A continuous current rating is 33% higher than previous models for the same size making
these our highest power-density servo drives to date. This offering includes PCB Mount, Machine Embedded
and Development Board form factors.

PCB Mount Form Factor


With a footprint of 38.1mm x
25.4mm, up to 4 FlexPro servo
drives can fit within the area of a
standard business card. The PCB
Mount form factor is our most
compact configuration with no
connectors or housing. They’re
intended to be soldered directly to
a PCB to help achieve the highest
levels of integration.

Machine Embedded Form


Factor
These models add a compact
interface card to the PCB Mount
versions to allow for direct
connections with power and signal
wires. This form factor makes it
easy to install servo drives just
about anywhere in a machine.

Development Board Form Factor


Essentially the same as the other models in this product launch but mounted to a larger board populated with
full-sized connectors with more spacing in between. Development boards are great for proof-of-concept
designs and for setting up experiments on a bench top.

Features:
• EtherCAT, CANopen, RS485/RS232 communication available
• 10-55 VDC input voltage
• Rated for 60A continuous current
• Incremental encoder, EnDat 2.2, and BISS C-mode feedback
• Torque, velocity, and position operating modes
• Configuration and full loop tuning
• STO (Safe Torque Off)
• IMPACT™ architecture

Projected Industries & Applications:


The small size of the FlexPro® drives makes them perfect for cobots (collaborative robots), AMRs, AGVs,
portable devices, lab and warehouse automation, military equipment, and any other integrated design.
Phone: 877-737-8698 • Fax: 877-737-8699
[email protected] • www.electromate.com

About IMPACT™
IMPACT™ (Integrated Motion Platform and Control Technology) is the architecture that makes AMC’s FlexPro®
drives possible. The stacking of circuit boards with creative selection and placement of high-power
components allows for much higher power density than previously produced servo drives. The expanded
processing capabilities ensure the drive’s intelligence is unmatched. IMPACT™ made its debut with FlexPro®.
This technology will be used in subsequent FlexPro® drives as well as any future custom products where it is
desired.

The full selection of 60Amp FlexPro drives can be found here.

For further information, please contact:

Warren Osak
[email protected]
Toll Free Phone:   877-737-8698
www.electromate.com

Tags: Advanced Motion Controls, Servo Amplifier, Servo Drive, FlexPro, Electromate

You might also like