Scribd
Upload
3K views1 page

JSA Transformer Installation

1. This document provides a job safety analysis for unloading a transformer and installing it. It outlines 7 basic job steps and identifies potential hazards at each step such as falling from heights, vehicle movement, cuts, and falls. 2. It recommends control measures to mitigate the hazards, such as using personal protective equipment like steel toe shoes and safety helmets, placing ladders on even surfaces, applying vehicle brakes, clearing the work area, and having banks men provide instructions. 3. Corrective actions are also specified, such as ensuring ladders are stable, using stoppers on vehicle wheels, maintaining proper sling positions, and wearing protective equipment. The goal is to complete each step safely without injury.

Uploaded by

pushpanath reddy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3K views1 page

JSA Transformer Installation

1. This document provides a job safety analysis for unloading a transformer and installing it. It outlines 7 basic job steps and identifies potential hazards at each step such as falling from heights, vehicle movement, cuts, and falls. 2. It recommends control measures to mitigate the hazards, such as using personal protective equipment like steel toe shoes and safety helmets, placing ladders on even surfaces, applying vehicle brakes, clearing the work area, and having banks men provide instructions. 3. Corrective actions are also specified, such as ensuring ladders are stable, using stoppers on vehicle wheels, maintaining proper sling positions, and wearing protective equipment. The goal is to complete each step safely without injury.

Uploaded by

pushpanath reddy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

JOB SAFETY ANALYSIS

Object:- JSA for Unloading of Transformer & Installation of transformer


Required Personal Protective Equipment (PPE) 1. Steel toe shoes, 2. Safety Helmet, 3. Reflective jacket, 4. Cotton hand gloves
Tools & Tackles:- 1. Guard rope of 10feet, 2. Measuring tape, 3. Sling as per load, 4. Wistle.5.Wooden Sleepers as required.6.Alluminium Ladder "A" Type (6Mtr)
Sl
Sequence of Basic Job Steps Potential Hazards Recommended Control Measure What Could Go Wrong Corrective Action
No
Injury/damage as a result of incorrect Obtain correct work permit from authorised person.Only authorised
1 Obtain PTW
information.Unauthorised access person allowed.All person must be safety inducted
Proper distance to be maintained for visual checking of the material.
And "A" Type Ladder to be use during inspection on the vehicle.
Falling from height and Physical injury to the person checking ladder may tumble down if not placed on even
2 Inspection of loaded material Examine object for burrs, sharp edges, nails. Remove objects prior to Skill person with unlaoding training to be deputed for this job
the items loaded in the vehicle.movement of the vehicle surface.
lift and/or wear PPE's for protection.Movement of the vehicle must be
stopped by hand break.

Check the object weight for using the approperiate sling . We have
Nil
approved 10 Ton x 3Mtr sling for this type of Transformer Erection.
Checking the weight and qty of object
3 Make sure stopper should be placed to stop movement of loaded
as per the document
vehicle. and also make sure that the brakes have been applied in order
Nil
to prevent the wheels from moving when material unloading from
trailer.

Inspect the area immediately around the load and the route for
Check the intended route and point of
4 Vehicle may stuck ,topple in uneven terrain,Slips, Falls clearance and tripping hazards. Clear movable objects from the route.
placement
Check for uneven terrain.

Fixing the Sling position with object & Strain or more serious Fall injury because the Height is more use of "A' Type ladder for fixing the sling D-sakle to tranformer lifting
5 Ladder may topple if not placed on even surface Ensure ladder must be placed on Even surface
Hydra hook. then 5mtr. hook.
Hand break must be applied to restrict tyres motion, Banks man should
Unloading of Trafo to respective Vehicle movement due to Hydra operation,crush or hit by be provide drive instructions to Hydra during backward direction of if hand break is not effective still vehicle can move
6 Stopper must be applied to rear wheels
foundation load in movement Hydra with hand & wistle. Keep a safe distance from suspended load, 2 while unloading by hydra
tag line must be used Guide the suspended load

Proper PPE must be worn.


Cuts due Shap edges of accessories.Fall of object from height Accessories may fall from height if sling position is not
7 Assembly of Transformer accessories Banks man should be provide drive instructions to Hydra during
while assembling with transformer main body proper
backward direction of Hydra with hand & wistle

You might also like