Scribd Logo
Upload

Welcome to Scribd!

  • 56 views

    Technical Data Sheet

    Uploaded by

    Abdul Basith
    Doha Waterproof Factory produces high density polyethylene (HDPE) geomembrane and T lock/V stud sheets. The document provides specifications for the material including physical properties like thickness, width, density, tensile strength, elongation and resistance to chemicals, punctures, and temperature. All properties are tested using standardized methods like ASTM. The sheets are intended to have high durability in waterproofing and environmental applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Technical Data Sheet

    Uploaded by

    Abdul Basith
    56 views3 pages
    Doha Waterproof Factory produces high density polyethylene (HDPE) geomembrane and T lock/V stud sheets. The document provides specifications for the material including physical properties like thickness, width, density, tensile strength, elongation and resistance to chemicals, punctures, and temperature. All properties are tested using standardized methods like ASTM. The sheets are intended to have high durability in waterproofing and environmental applications.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Doha Waterproof Factory produces high density polyethylene (HDPE) geomembrane and T lock/V stud sheets. The document provides specifications for the material including physical properties like thickness, width, density, tensile strength, elongation and resistance to chemicals, punctures, and temperature. All properties are tested using standardized methods like ASTM. The sheets are intended to have high durability in waterproofing and environmental applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    56 views3 pages

    Technical Data Sheet

    Uploaded by

    Abdul Basith
    Doha Waterproof Factory produces high density polyethylene (HDPE) geomembrane and T lock/V stud sheets. The document provides specifications for the material including physical properties like thickness, width, density, tensile strength, elongation and resistance to chemicals, punctures, and temperature. All properties are tested using standardized methods like ASTM. The sheets are intended to have high durability in waterproofing and environmental applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Doha Waterproof Factory

    4.Data Data
    7. Technical Sheets
    Sheet
    7.Technical
    DataData Data
    Sheets Sheet
    Technical Sheet

    Tel+974-44903836- Mob: +974 50191196- P.O. Box 50311 Doha, State of Qatar
    Website: www.dohawaterproof.com // Mail: [email protected]
    Doha Waterproof Factory
    Data Sheet
    High Density Polyethylene Geomembrane sheet

    S
    Test Unit Specificatio Test Method
    N
    n
    1 Material - HDPE ASTM D1238
    Melt Flow Rate for g/10
    2 ≤ 3.00 ASTM D1238
    2.16 kg @ 190°C min.
    3 Density g/cm3 ≥ 0.94 ASTM D1505
    4 Sheet Color Black
    Carbon Black
    5 % 2 to 3 ISO/
    Content
    DIS 6964/ASTMD1603
    (if black) 2.5±0.5
    Dimension of Sheet
    6 Thickness mm 0.75 1 1.5 2.0 2.5
    ASTM D5199
    Lowest individual
    7 mm 0.65 0.90 1.45 1.90 2.4
    thickness
    8 Width meter 7.5 m ASTM D4801
    9 Length meter As required ASTM D4801
    Physical Properties
    10 Shore Hardness Shore D ≥ 50 ≥ 50 ≥ 50 ≥ 50 ≥ 50 ASTM D2240
    Tensile Strength at
    11 N/mm ≥11 ≥ 15 ≥ 23 ≥ 29 ≥ 32
    Yield
    12 Strength at break N/mm ≥20 ≥ 28 ≥ 42 ≥ 52 ≥ 60 ASTM D6693
    Elongation at
    13 % ≥700 ≥ 700 ≥ 700 ≥ 700 ≥ 700
    Break
    Water Absorption
    14 % ≤ 0.25 ≤ 0.25 ≤ 0.25 ≤ 0.25 ≤ 0.25 ASTM D570
    (24 hrs)
    15 Tear resistance N ≥ 93 ≥ 125 ≥ 185 ≥ 240 ≥ 310 ASTM D1004
    Puncture
    16 N ≥ 240 ≥ 350 ≥ 500 ≥ 580 ≥ 700 ASTM D4833
    resistance
    Brittleness (low
    temperature
    - No Cracks No Cracks No Cracks No Cracks No Cracks ASTM D746
    17 resistance) @ -
    75°C
    Chemical Resistance
    Test on Environmental Resistance of Liner Sheet for 7 days @ 23 ± 2°C
    Hydrochloric acid
    -
    (10%)
    Nitric Acid (10%) -
    Sulfuric Acid (30%) -
    18 Ammonium
    - No Characteristic Observation ASTM D543
    Hydroxide (60%)
    Ethanol -
    Sodium Chloride
    -
    Solution (20%)
    ISO Octane (99.5%) -

    Tel+974-44903836- Mob: +974 50191196- P.O. Box 50311 Doha, State of Qatar
    Website: www.dohawaterproof.com // Mail: [email protected]
    Doha Waterproof Factory
    Data Sheet
    High Density Polyethylene T lock & V stud Sheet
    SN Test Unit Specification Test Method Remark
    1 Material - HDPE ASTM D1238
    Melt Flow Rate for 2.16 kg @
    2 g/10 min. ≤ 1.00 ASTM D1238
    190°C
    3 Density g/cm3 ≥ 0.94 ASTM D1505
    4 Sheet Color Black or other color required by customer
    5 Carbon Black Content (if black) % 2.5 ± 0.5 ASTM D1603
    Dimension of Sheet
    V stud T lock
    6 Thickness mm
    1.5 to 8 1.5 to 4 As Required
    ASTM D4801
    7 Width meter Max: 2.0 by Customer
    8 Length meter As reqd.
    Physical Properties
    9 Shore Hardness Shore D ≥ 50 ASTM D2240
    10 Tensile Strength at Yield MPa ≥ 15
    11 Tensile Strength at Break MPa ≥ 24
    ASTM D638
    12 Elongation at Yield % ≥ 10
    13 Elongation at Break % ≥ 700
    14 Water Absorption (24 hrs) % ≤ 0.25 ASTM D570
    15 Tear Strength N ≥ 120 ASTM D1004
    16 Puncture resistance N ≥ 300 ASTM D4833
    Brittleness (low temperature
    17 - No crack ASTM D746
    resistance) @ -75°C
    18 Abrasion resistance (wear index) % 0.007 ASTM D4060
    19 Coefficient of Static Friction - ≥ 0.5 ASTM D1894
    Chemical Resistance
    After Test in Below Solutions for 112 days @ 25 ± 3° C
    20 Hardness 1-Sec Shore D ≥ 35 ASTM D2240 This is to be
    21 Tensile Strength Mpa ≥ 14.5 ASTM D412 used as pre-
    22 Elongation at Break % ≥ 600 ASTM D412 qualification
    test and
    when
    material
    23 Weight Change % ± 1.5 ASTM D1239 formulations
    are changed

    Test on Environmental Resistance of Liner Sheet for 7 days @ 23 ± 2°C


    Hydrochloric acid (10%) - This is to be
    Nitric Acid (10%) - used as pre-
    Sulfuric Acid (30%) - qualification
    Ammonium Hydroxide (60%) - No Characteristic test and
    24 ASTM D543
    Ethanol - Observation when
    Sodium Chloride Solution (20%) - material
    formulations
    ISO Octane (99.5%) - are changed

    Tel+974-44903836- Mob: +974 50191196- P.O. Box 50311 Doha, State of Qatar
    Website: www.dohawaterproof.com // Mail: [email protected]

    You might also like