Eee 4 Ei8075 Foli
Eee 4 Ei8075 Foli
Eee 4 Ei8075 Foli
The lower energy level contains more atoms than upper level under the conditions of
_____ in the laser occurs when photon colliding with an excited atoms causes the
stimulated emission of a second photon
A semiconductor laser crystal of length 5 cm, refractive index 1.8 is used as an optical
source. Determine the frequency separation of the modes.
A perfect semiconductor crystal containing no impurities or lattice defects is called as
The majority of the carriers in a p-type semiconductor are_____
Population Inversion is obtained at p-n junction by
Laser having _____ beam and very ______ pulse width are called for industrial lasers
Brewster windows at the end of gas laser produces polarized
Quantum well laser has a dimensions of
Gas laser consists of a _____ filled tube placed in laser cavity
Which is the example of solid state laser
Q-switchingis achieved by putting some controlled variable ______
_____ results from small lateral forces exerted on the fiber during the cabling process
What does micro-bending losses depend on_______
Determine coupling efficiency if the misalingment loss ina graded index fiber is 0.102
Which is the most bebeficial index profile in sinfle mode fibers?
Which component provides additional strength and prevents the fiber from any damage?
Which kind of dispersion phenomenon give rise to pulse spreading in single mode fibers?
Doppler effect is the apparent change in
Laser surgery is a type of surgery that uses special ________ instead of instruments
________ is the medical subspecially dealing with the study and treatment of cancer
________ is a well investigated system uses photosensitizer to illuminate the diseased
tissues
Pick the types of laser from the below given list
The principle of the medical application of lasers is selective
A ______ tumor is any intracranial mass created by an abnormal cells in brain
________ is used to measure vibrational amplitudes and deformations in biological
speimens
Hologram is used to fine the information of the object in ____ form
Photographic flim contains only _______ information of the object
_____ illuminate the inner structure of the object
_______ laser is used to do kidney stone extrusion and to do angioplasty
The principle of optical gyroscope is that _____ laser beam are moving in opposite
directions in the same ring path
The process of which Surface of the material melted by CO2 laser is known as
From the below given list pick the laser hardening techniques
______ treatment for hardening or annealing has been practised in metallurgy
option1 option2 option3
standing wave sine wave cosine wave
reactive option1 1
diodes option2 1
Pumping option3 1
2 GHz option3 1
Valance electron option1 1
Neutrons option1 1
Heavy doping of P and n type option4 1
low,narrow option3 1
TM wave option1 1
55-75 A option2 1
gas option4 1
Co2 laser option1 1
terminator option3 1
Phosphorus option3 1
Tenths of millimeter option2 1
0.684 option2 1
Step and graded index option3 1
Holography option4 2
4-D option3 2
amplitude option4 2
fiberoscopes option2 2
none of the above option1 2
two option4 2
laser splicing option3 2
All the above option4 2
splicing option2 2