Scribd
Upload
80 views7 pages

CCN Lab 9 Router-Interface - ND

This document describes a lab experiment on configuring router interfaces. The objectives are to learn how to configure router interfaces to enable communication between networks. It involves setting up a network with one router and two PCs. The router interfaces are configured with IP addresses from three different class C networks. The PCs are also configured with IP addresses from their respective networks. The connectivity is tested by pinging from one PC to the other.

Uploaded by

Shayan Fatima
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
80 views7 pages

CCN Lab 9 Router-Interface - ND

This document describes a lab experiment on configuring router interfaces. The objectives are to learn how to configure router interfaces to enable communication between networks. It involves setting up a network with one router and two PCs. The router interfaces are configured with IP addresses from three different class C networks. The PCs are also configured with IP addresses from their respective networks. The connectivity is tested by pinging from one PC to the other.

Uploaded by

Shayan Fatima
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

DEPARTMENT OF ELECTRONICS ENGINEERING

MEHRAN UNIVERSITY OF ENGINEERING & TECHNOLOGY, JAMSHORO


COMPUTER COMMUNICATION & NETWORKING
(7th Term, 4th Year) LAB EXPERIMENT # 9/1

Name: ___Shayan Fatima___________________________ Roll No: ___18TL06______

Score: ____________Signature of the Lab Tutor: _______________ Date: ___________

CONFIGURATION OF ROUTER INTERFACES

PERFORMANCE OBJECTIVE
Upon successful completion of this experiment, the student will be able to learn:

(i) To configure the interfaces of a router for communication between user of


different networks.

Setting Up a Network:

Step 1: Configuring Router interfaces


DEPARTMENT OF ELECTRONICS ENGINEERING
MEHRAN UNIVERSITY OF ENGINEERING & TECHNOLOGY, JAMSHORO
COMPUTER COMMUNICATION & NETWORKING
(7th Term, 4th Year) LAB EXPERIMENT # 9/2

For Router0:

Question: Why we have assigned IP address of which class and how many host IP address it has?
Ans: we have assigned IP address of class c and c class has255 host IP

Step 2: Configuring the workstations:

PC0

PC1
DEPARTMENT OF ELECTRONICS ENGINEERING
MEHRAN UNIVERSITY OF ENGINEERING & TECHNOLOGY, JAMSHORO
COMPUTER COMMUNICATION & NETWORKING
(7th Term, 4th Year) LAB EXPERIMENT # 9/3

Question: Why the hosts have been assigned the default gateway addresses?
Ans: If your device has multiple interfaces, then certain other devices or networks may be
reachable only through a subset of the interfaces. You must add specific routes for those. The
default route is the route to "the rest of the internet". It tells your device to which interface to send
those packets.

Step 3: Check the interface status:

Router1#sh ip int brief

Step 4: Check the routing table entries:

Router0#sh ip route

Step 7: Check connectivity from host to host

Ping PC-0 to PC-1:


DEPARTMENT OF ELECTRONICS ENGINEERING
MEHRAN UNIVERSITY OF ENGINEERING & TECHNOLOGY, JAMSHORO
COMPUTER COMMUNICATION & NETWORKING
(7th Term, 4th Year) LAB EXPERIMENT # 9/4

Ping PC-1 to PC-0:

Lab Exercise:

Submit a lab with performing a task connect three access layer switches of HR, Sales and accounts
department with router using crossover cable and configure router interfaces with three different
networks using class c IP address scheme.

Topology:
DEPARTMENT OF ELECTRONICS ENGINEERING
MEHRAN UNIVERSITY OF ENGINEERING & TECHNOLOGY, JAMSHORO
COMPUTER COMMUNICATION & NETWORKING
(7th Term, 4th Year) LAB EXPERIMENT # 9/5

PC1:

PC2:

PC3:

PC4:

Gateway:
DEPARTMENT OF ELECTRONICS ENGINEERING
MEHRAN UNIVERSITY OF ENGINEERING & TECHNOLOGY, JAMSHORO
COMPUTER COMMUNICATION & NETWORKING
(7th Term, 4th Year) LAB EXPERIMENT # 9/6

Router Configuration:
DEPARTMENT OF ELECTRONICS ENGINEERING
MEHRAN UNIVERSITY OF ENGINEERING & TECHNOLOGY, JAMSHORO
COMPUTER COMMUNICATION & NETWORKING
(7th Term, 4th Year) LAB EXPERIMENT # 9/7

Pinging from PC1 to PC3:

Pinging from PC4 to PC2:

You might also like